| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Richard Purdie | 425 | 73.28% | 2 | 16.67% |
| Eric Miao | 118 | 20.34% | 3 | 25.00% |
| Haojian Zhuang | 20 | 3.45% | 2 | 16.67% |
| Marek Vašut | 11 | 1.90% | 1 | 8.33% |
| Linus Walleij | 2 | 0.34% | 1 | 8.33% |
| Thomas Gleixner | 2 | 0.34% | 1 | 8.33% |
| Mariusz Kozlowski | 1 | 0.17% | 1 | 8.33% |
| Arnd Bergmann | 1 | 0.17% | 1 | 8.33% |
| Total | 580 | 12 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Hardware specific definitions for SL-Cx000 series of PDAs * * Copyright (c) 2005 Alexander Wykes * Copyright (c) 2005 Richard Purdie * * Based on Sharp's 2.4 kernel patches */ #ifndef __ASM_ARCH_SPITZ_H #define __ASM_ARCH_SPITZ_H 1 #endif #include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */ #include <linux/fb.h> /* Spitz/Akita GPIOs */ #define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */ #define SPITZ_GPIO_RESET (1) #define SPITZ_GPIO_nSD_DETECT (9) #define SPITZ_GPIO_TP_INT (11) /* Touch Panel interrupt */ #define SPITZ_GPIO_AK_INT (13) /* Remote Control */ #define SPITZ_GPIO_ADS7846_CS (14) #define SPITZ_GPIO_SYNC (16) #define SPITZ_GPIO_MAX1111_CS (20) #define SPITZ_GPIO_FATAL_BAT (21) #define SPITZ_GPIO_HSYNC (22) #define SPITZ_GPIO_nSD_CLK (32) #define SPITZ_GPIO_USB_DEVICE (35) #define SPITZ_GPIO_USB_HOST (37) #define SPITZ_GPIO_USB_CONNECT (41) #define SPITZ_GPIO_LCDCON_CS (53) #define SPITZ_GPIO_nPCE (54) #define SPITZ_GPIO_nSD_WP (81) #define SPITZ_GPIO_ON_RESET (89) #define SPITZ_GPIO_BAT_COVER (90) #define SPITZ_GPIO_CF_CD (94) #define SPITZ_GPIO_ON_KEY (95) #define SPITZ_GPIO_SWA (97) #define SPITZ_GPIO_SWB (96) #define SPITZ_GPIO_CHRG_FULL (101) #define SPITZ_GPIO_CO (101) #define SPITZ_GPIO_CF_IRQ (105) #define SPITZ_GPIO_AC_IN (115) #define SPITZ_GPIO_HP_IN (116) /* Spitz Only GPIOs */ #define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */ #define SPITZ_GPIO_CF2_CD (93) /* Spitz/Akita Keyboard Definitions */ #define SPITZ_KEY_STROBE_NUM (11) #define SPITZ_KEY_SENSE_NUM (7) #define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000 #define SPITZ_GPIO_G1_STROBE_BIT 0x00100000 #define SPITZ_GPIO_G2_STROBE_BIT 0x01000000 #define SPITZ_GPIO_G3_STROBE_BIT 0x00041880 #define SPITZ_GPIO_G0_SENSE_BIT 0x00021000 #define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4 #define SPITZ_GPIO_G2_SENSE_BIT 0x08000000 #define SPITZ_GPIO_G3_SENSE_BIT 0x00000000 #define SPITZ_GPIO_KEY_STROBE0 88 #define SPITZ_GPIO_KEY_STROBE1 23 #define SPITZ_GPIO_KEY_STROBE2 24 #define SPITZ_GPIO_KEY_STROBE3 25 #define SPITZ_GPIO_KEY_STROBE4 26 #define SPITZ_GPIO_KEY_STROBE5 27 #define SPITZ_GPIO_KEY_STROBE6 52 #define SPITZ_GPIO_KEY_STROBE7 103 #define SPITZ_GPIO_KEY_STROBE8 107 #define SPITZ_GPIO_KEY_STROBE9 108 #define SPITZ_GPIO_KEY_STROBE10 114 #define SPITZ_GPIO_KEY_SENSE0 12 #define SPITZ_GPIO_KEY_SENSE1 17 #define SPITZ_GPIO_KEY_SENSE2 91 #define SPITZ_GPIO_KEY_SENSE3 34 #define SPITZ_GPIO_KEY_SENSE4 36 #define SPITZ_GPIO_KEY_SENSE5 38 #define SPITZ_GPIO_KEY_SENSE6 39 /* Spitz Scoop Device (No. 1) GPIOs */ /* Suspend States in comments */ #define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Keep */ #define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Keep */ #define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Keep */ #define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Low */ #define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Low */ #define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* Keep */ #define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Keep */ #define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */ #define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */ #define SPITZ_SCP_IO_DIR (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \ SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \ SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) #define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R) #define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) #define SPITZ_SCP_SUS_SET 0 #define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0) #define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1) #define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2) #define SPITZ_GPIO_MUTE_L (SPITZ_SCP_GPIO_BASE + 3) #define SPITZ_GPIO_MUTE_R (SPITZ_SCP_GPIO_BASE + 4) #define SPITZ_GPIO_CF_POWER (SPITZ_SCP_GPIO_BASE + 5) #define SPITZ_GPIO_LED_ORANGE (SPITZ_SCP_GPIO_BASE + 6) #define SPITZ_GPIO_JK_A (SPITZ_SCP_GPIO_BASE + 7) #define SPITZ_GPIO_ADC_TEMP_ON (SPITZ_SCP_GPIO_BASE + 8) /* Spitz Scoop Device (No. 2) GPIOs */ /* Suspend States in comments */ #define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */ #define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Keep */ #define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */ #define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */ #define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */ #define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */ #define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Low */ #define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */ #define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */ #define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \ SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) #define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1) #define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) #define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) #define SPITZ_SCP2_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12) #define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0) #define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1) #define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2) #define SPITZ_GPIO_RESERVED_2 (SPITZ_SCP2_GPIO_BASE + 3) #define SPITZ_GPIO_RESERVED_3 (SPITZ_SCP2_GPIO_BASE + 4) #define SPITZ_GPIO_RESERVED_4 (SPITZ_SCP2_GPIO_BASE + 5) #define SPITZ_GPIO_BACKLIGHT_CONT (SPITZ_SCP2_GPIO_BASE + 6) #define SPITZ_GPIO_BACKLIGHT_ON (SPITZ_SCP2_GPIO_BASE + 7) #define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8) /* Akita IO Expander GPIOs */ #define AKITA_IOEXP_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12) #define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0) #define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1) #define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2) #define AKITA_GPIO_BACKLIGHT_ON (AKITA_IOEXP_GPIO_BASE + 3) #define AKITA_GPIO_BACKLIGHT_CONT (AKITA_IOEXP_GPIO_BASE + 4) #define AKITA_GPIO_AKIN_PULLUP (AKITA_IOEXP_GPIO_BASE + 5) #define AKITA_GPIO_IR_ON (AKITA_IOEXP_GPIO_BASE + 6) #define AKITA_GPIO_RESERVED_7 (AKITA_IOEXP_GPIO_BASE + 7) /* Spitz IRQ Definitions */ #define SPITZ_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT) #define SPITZ_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN) #define SPITZ_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT) #define SPITZ_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN) #define SPITZ_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT) #define SPITZ_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC) #define SPITZ_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY) #define SPITZ_IRQ_GPIO_SWA PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA) #define SPITZ_IRQ_GPIO_SWB PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB) #define SPITZ_IRQ_GPIO_BAT_COVER PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER) #define SPITZ_IRQ_GPIO_FATAL_BAT PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT) #define SPITZ_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO) #define SPITZ_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ) #define SPITZ_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD) #define SPITZ_IRQ_GPIO_CF2_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ) #define SPITZ_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT) #define SPITZ_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT) /* * Shared data structures */ extern struct platform_device spitzssp_device; extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1