Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Hauke Mehrtens | 2673 | 92.08% | 8 | 33.33% |
Nathan Hintz | 167 | 5.75% | 8 | 33.33% |
Rafał Miłecki | 52 | 1.79% | 4 | 16.67% |
Tom Rix | 3 | 0.10% | 1 | 4.17% |
Paul Gortmaker | 3 | 0.10% | 1 | 4.17% |
Christoph Hellwig | 3 | 0.10% | 1 | 4.17% |
Julia Lawall | 2 | 0.07% | 1 | 4.17% |
Total | 2903 | 24 |
/* * Broadcom specific AMBA * PCI Core in hostmode * * Copyright 2005 - 2011, Broadcom Corporation * Copyright 2006, 2007, Michael Buesch <m@bues.ch> * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> * * Licensed under the GNU/GPL. See COPYING for details. */ #include "bcma_private.h" #include <linux/pci.h> #include <linux/slab.h> #include <linux/export.h> #include <linux/bcma/bcma.h> #include <asm/paccess.h> /* Probe a 32bit value on the bus and catch bus exceptions. * Returns nonzero on a bus exception. * This is MIPS specific */ #define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) /* Assume one-hot slot wiring */ #define BCMA_PCI_SLOT_MAX 16 #define PCI_CONFIG_SPACE_SIZE 256 bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) { struct bcma_bus *bus = pc->core->bus; u16 chipid_top; u32 tmp; chipid_top = (bus->chipinfo.id & 0xFF00); if (chipid_top != 0x4700 && chipid_top != 0x5300) return false; bcma_core_enable(pc->core, 0); return !mips_busprobe32(tmp, pc->core->io_addr); } static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) { pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); } static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, u32 data) { pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); } static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, unsigned int func, unsigned int off) { u32 addr = 0; /* Issue config commands only when the data link is up (at least * one external pcie device is present). */ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) goto out; /* Type 0 transaction */ /* Slide the PCI window to the appropriate slot */ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); /* Calculate the address */ addr = pc->host_controller->host_cfg_addr; addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); addr |= (off & ~3); out: return addr; } static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, unsigned int func, unsigned int off, void *buf, int len) { int err = -EINVAL; u32 addr, val; void __iomem *mmio = 0; WARN_ON(!pc->hostmode); if (unlikely(len != 1 && len != 2 && len != 4)) goto out; if (dev == 0) { /* we support only two functions on device 0 */ if (func > 1) goto out; /* accesses to config registers with offsets >= 256 * requires indirect access. */ if (off >= PCI_CONFIG_SPACE_SIZE) { addr = (func << 12); addr |= (off & 0x0FFC); val = bcma_pcie_read_config(pc, addr); } else { addr = BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); addr |= (off & 0xFC); val = pcicore_read32(pc, addr); } } else { addr = bcma_get_cfgspace_addr(pc, dev, func, off); if (unlikely(!addr)) goto out; err = -ENOMEM; mmio = ioremap(addr, sizeof(val)); if (!mmio) goto out; if (mips_busprobe32(val, mmio)) { val = 0xFFFFFFFF; goto unmap; } } val >>= (8 * (off & 3)); switch (len) { case 1: *((u8 *)buf) = (u8)val; break; case 2: *((u16 *)buf) = (u16)val; break; case 4: *((u32 *)buf) = (u32)val; break; } err = 0; unmap: if (mmio) iounmap(mmio); out: return err; } static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, unsigned int func, unsigned int off, const void *buf, int len) { int err = -EINVAL; u32 addr, val; void __iomem *mmio = 0; u16 chipid = pc->core->bus->chipinfo.id; WARN_ON(!pc->hostmode); if (unlikely(len != 1 && len != 2 && len != 4)) goto out; if (dev == 0) { /* we support only two functions on device 0 */ if (func > 1) goto out; /* accesses to config registers with offsets >= 256 * requires indirect access. */ if (off >= PCI_CONFIG_SPACE_SIZE) { addr = (func << 12); addr |= (off & 0x0FFC); val = bcma_pcie_read_config(pc, addr); } else { addr = BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); addr |= (off & 0xFC); val = pcicore_read32(pc, addr); } } else { addr = bcma_get_cfgspace_addr(pc, dev, func, off); if (unlikely(!addr)) goto out; err = -ENOMEM; mmio = ioremap(addr, sizeof(val)); if (!mmio) goto out; if (mips_busprobe32(val, mmio)) { val = 0xFFFFFFFF; goto unmap; } } switch (len) { case 1: val &= ~(0xFF << (8 * (off & 3))); val |= *((const u8 *)buf) << (8 * (off & 3)); break; case 2: val &= ~(0xFFFF << (8 * (off & 3))); val |= *((const u16 *)buf) << (8 * (off & 3)); break; case 4: val = *((const u32 *)buf); break; } if (dev == 0) { /* accesses to config registers with offsets >= 256 * requires indirect access. */ if (off >= PCI_CONFIG_SPACE_SIZE) bcma_pcie_write_config(pc, addr, val); else pcicore_write32(pc, addr, val); } else { writel(val, mmio); if (chipid == BCMA_CHIP_ID_BCM4716 || chipid == BCMA_CHIP_ID_BCM4748) readl(mmio); } err = 0; unmap: if (mmio) iounmap(mmio); out: return err; } static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 *val) { unsigned long flags; int err; struct bcma_drv_pci *pc; struct bcma_drv_pci_host *pc_host; pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); pc = pc_host->pdev; spin_lock_irqsave(&pc_host->cfgspace_lock, flags); err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, val, size); spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; } static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 val) { unsigned long flags; int err; struct bcma_drv_pci *pc; struct bcma_drv_pci_host *pc_host; pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); pc = pc_host->pdev; spin_lock_irqsave(&pc_host->cfgspace_lock, flags); err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, &val, size); spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; } /* return cap_offset if requested capability exists in the PCI config space */ static u8 bcma_find_pci_capability(struct bcma_drv_pci *pc, unsigned int dev, unsigned int func, u8 req_cap_id, unsigned char *buf, u32 *buflen) { u8 cap_id; u8 cap_ptr = 0; u32 bufsize; u8 byte_val; /* check for Header type 0 */ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, sizeof(u8)); if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL) return cap_ptr; /* check if the capability pointer field exists */ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, sizeof(u8)); if (!(byte_val & PCI_STATUS_CAP_LIST)) return cap_ptr; /* check if the capability pointer is 0x00 */ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, sizeof(u8)); if (cap_ptr == 0x00) return cap_ptr; /* loop through the capability list and see if the requested capability * exists */ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); while (cap_id != req_cap_id) { bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, sizeof(u8)); if (cap_ptr == 0x00) return cap_ptr; bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); } /* found the caller requested capability */ if ((buf != NULL) && (buflen != NULL)) { u8 cap_data; bufsize = *buflen; if (!bufsize) return cap_ptr; *buflen = 0; /* copy the capability data excluding cap ID and next ptr */ cap_data = cap_ptr + 2; if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; *buflen = bufsize; while (bufsize--) { bcma_extpci_read_config(pc, dev, func, cap_data, buf, sizeof(u8)); cap_data++; buf++; } } return cap_ptr; } /* If the root port is capable of returning Config Request * Retry Status (CRS) Completion Status to software then * enable the feature. */ static void bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) { struct bcma_bus *bus = pc->core->bus; u8 cap_ptr, root_ctrl, root_cap, dev; u16 val16; int i; cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, NULL); root_cap = cap_ptr + PCI_EXP_RTCAP; bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { /* Enable CRS software visibility */ root_ctrl = cap_ptr + PCI_EXP_RTCTL; val16 = PCI_EXP_RTCTL_CRSSVE; bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, sizeof(u16)); /* Initiate a configuration request to read the vendor id * field of the device function's config space header after * 100 ms wait time from the end of Reset. If the device is * not done with its internal initialization, it must at * least return a completion TLP, with a completion status * of "Configuration Request Retry Status (CRS)". The root * complex must complete the request to the host by returning * a read-data value of 0001h for the Vendor ID field and * all 1s for any additional bytes included in the request. * Poll using the config reads for max wait time of 1 sec or * until we receive the successful completion status. Repeat * the procedure for all the devices. */ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { for (i = 0; i < 100000; i++) { bcma_extpci_read_config(pc, dev, 0, PCI_VENDOR_ID, &val16, sizeof(val16)); if (val16 != 0x1) break; udelay(10); } if (val16 == 0x1) bcma_err(bus, "PCI: Broken device in slot %d\n", dev); } } } void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) { struct bcma_bus *bus = pc->core->bus; struct bcma_drv_pci_host *pc_host; u32 tmp; u32 pci_membase_1G; unsigned long io_map_base; bcma_info(bus, "PCIEcore in host mode found\n"); if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { bcma_info(bus, "This PCIE core is disabled and not working\n"); return; } pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); if (!pc_host) { bcma_err(bus, "can not allocate memory"); return; } spin_lock_init(&pc_host->cfgspace_lock); pc->host_controller = pc_host; pc_host->pci_controller.io_resource = &pc_host->io_resource; pc_host->pci_controller.mem_resource = &pc_host->mem_resource; pc_host->pci_controller.pci_ops = &pc_host->pci_ops; pc_host->pdev = pc; pci_membase_1G = BCMA_SOC_PCI_DMA; pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; pc_host->mem_resource.name = "BCMA PCIcore external memory"; pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; pc_host->io_resource.name = "BCMA PCIcore external I/O"; pc_host->io_resource.start = 0x100; pc_host->io_resource.end = 0x7FF; pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; /* Reset RC */ usleep_range(3000, 5000); pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); msleep(50); pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | BCMA_CORE_PCI_CTL_RST_OE); /* 64 MB I/O access window. On 4716, use * sbtopcie0 to access the device registers. We * can't use address match 2 (1 GB window) region * as mips can't generate 64-bit address on the * backplane. */ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4716 || bus->chipinfo.id == BCMA_CHIP_ID_BCM4748) { pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + BCMA_SOC_PCI_MEM_SZ - 1; pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); } else if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) { tmp = BCMA_CORE_PCI_SBTOPCI_MEM; tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; if (pc->core->core_unit == 0) { pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + BCMA_SOC_PCI_MEM_SZ - 1; pc_host->io_resource.start = 0x100; pc_host->io_resource.end = 0x47F; pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, tmp | BCMA_SOC_PCI_MEM); } else if (pc->core->core_unit == 1) { pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + BCMA_SOC_PCI_MEM_SZ - 1; pc_host->io_resource.start = 0x480; pc_host->io_resource.end = 0x7FF; pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, tmp | BCMA_SOC_PCI1_MEM); } } else pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, BCMA_CORE_PCI_SBTOPCI_IO); /* 64 MB configuration access window */ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); /* 1 GB memory access window */ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); /* As per PCI Express Base Spec 1.1 we need to wait for * at least 100 ms from the end of a reset (cold/warm/hot) * before issuing configuration requests to PCI Express * devices. */ msleep(100); bcma_core_pci_enable_crs(pc); if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 || bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) { u16 val16; bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, &val16, sizeof(val16)); val16 |= (2 << 5); /* Max payload size of 512 */ val16 |= (2 << 12); /* MRRS 512 */ bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, &val16, sizeof(val16)); } /* Enable PCI bridge BAR0 memory & master access */ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); /* Enable PCI interrupts */ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); /* Ok, ready to run, register it to the system. * The following needs change, if we want to port hostmode * to non-MIPS platform. */ io_map_base = (unsigned long)ioremap(pc_host->mem_resource.start, resource_size(&pc_host->mem_resource)); pc_host->pci_controller.io_map_base = io_map_base; set_io_port_base(pc_host->pci_controller.io_map_base); /* Give some time to the PCI controller to configure itself with the new * values. Not waiting at this point causes crashes of the machine. */ usleep_range(10000, 15000); register_pci_controller(&pc_host->pci_controller); return; } /* Early PCI fixup for a device on the PCI-core bridge. */ static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) { if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { /* This is not a device on the PCI-core bridge. */ return; } if (PCI_SLOT(dev->devfn) != 0) return; pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); /* Enable PCI bridge bus mastering and memory space */ pci_set_master(dev); if (pcibios_enable_device(dev, ~0) < 0) { pr_err("PCI: BCMA bridge enable failed\n"); return; } /* Enable PCI bridge BAR1 prefetch and burst */ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); } DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); /* Early PCI fixup for all PCI-cores to set the correct memory address. */ static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) { struct resource *res; int pos, err; if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { /* This is not a device on the PCI-core bridge. */ return; } if (PCI_SLOT(dev->devfn) == 0) return; pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); for (pos = 0; pos < 6; pos++) { res = &dev->resource[pos]; if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) { err = pci_assign_resource(dev, pos); if (err) pr_err("PCI: Problem fixing up the addresses on %s\n", pci_name(dev)); } } } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); /* This function is called when doing a pci_enable_device(). * We must first check if the device is a device on the PCI-core bridge. */ int bcma_core_pci_plat_dev_init(struct pci_dev *dev) { struct bcma_drv_pci_host *pc_host; int readrq; if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { /* This is not a device on the PCI-core bridge. */ return -ENODEV; } pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, pci_ops); pr_info("PCI: Fixing up device %s\n", pci_name(dev)); /* Fix up interrupt lines */ dev->irq = bcma_core_irq(pc_host->pdev->core, 0); pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); readrq = pcie_get_readrq(dev); if (readrq > 128) { pr_info("change PCIe max read request size from %i to 128\n", readrq); pcie_set_readrq(dev, 128); } return 0; } EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); /* PCI device IRQ mapping. */ int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) { struct bcma_drv_pci_host *pc_host; if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { /* This is not a device on the PCI-core bridge. */ return -ENODEV; } pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, pci_ops); return bcma_core_irq(pc_host->pdev->core, 0); } EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1