| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Andrew Morton | 2000 | 94.16% | 1 | 9.09% |
| Corey Minyard | 109 | 5.13% | 7 | 63.64% |
| Xianting Tian | 9 | 0.42% | 1 | 9.09% |
| Joe Perches | 5 | 0.24% | 1 | 9.09% |
| Xie XiuQi | 1 | 0.05% | 1 | 9.09% |
| Total | 2124 | 11 |
// SPDX-License-Identifier: GPL-2.0+ /* * ipmi_smic_sm.c * * The state-machine driver for an IPMI SMIC driver * * It started as a copy of Corey Minyard's driver for the KSC interface * and the kernel patch "mmcdev-patch-245" by HP * * modified by: Hannes Schulz <schulz@schwaar.com> * ipmi@schwaar.com * * * Corey Minyard's driver for the KSC interface has the following * copyright notice: * Copyright 2002 MontaVista Software Inc. * * the kernel patch "mmcdev-patch-245" by HP has the following * copyright notice: * (c) Copyright 2001 Grant Grundler (c) Copyright * 2001 Hewlett-Packard Company */ #define DEBUG /* So dev_dbg() is always available. */ #include <linux/kernel.h> /* For printk. */ #include <linux/string.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/ipmi_msgdefs.h> /* for completion codes */ #include "ipmi_si_sm.h" /* smic_debug is a bit-field * SMIC_DEBUG_ENABLE - turned on for now * SMIC_DEBUG_MSG - commands and their responses * SMIC_DEBUG_STATES - state machine */ #define SMIC_DEBUG_STATES 4 #define SMIC_DEBUG_MSG 2 #define SMIC_DEBUG_ENABLE 1 static int smic_debug = 1; module_param(smic_debug, int, 0644); MODULE_PARM_DESC(smic_debug, "debug bitmask, 1=enable, 2=messages, 4=states"); enum smic_states { SMIC_IDLE, SMIC_START_OP, SMIC_OP_OK, SMIC_WRITE_START, SMIC_WRITE_NEXT, SMIC_WRITE_END, SMIC_WRITE2READ, SMIC_READ_START, SMIC_READ_NEXT, SMIC_READ_END, SMIC_HOSED }; #define MAX_SMIC_READ_SIZE 80 #define MAX_SMIC_WRITE_SIZE 80 #define SMIC_MAX_ERROR_RETRIES 3 /* Timeouts in microseconds. */ #define SMIC_RETRY_TIMEOUT (2*USEC_PER_SEC) /* SMIC Flags Register Bits */ #define SMIC_RX_DATA_READY 0x80 #define SMIC_TX_DATA_READY 0x40 /* * SMIC_SMI and SMIC_EVM_DATA_AVAIL are only used by * a few systems, and then only by Systems Management * Interrupts, not by the OS. Always ignore these bits. * */ #define SMIC_SMI 0x10 #define SMIC_EVM_DATA_AVAIL 0x08 #define SMIC_SMS_DATA_AVAIL 0x04 #define SMIC_FLAG_BSY 0x01 /* SMIC Error Codes */ #define EC_NO_ERROR 0x00 #define EC_ABORTED 0x01 #define EC_ILLEGAL_CONTROL 0x02 #define EC_NO_RESPONSE 0x03 #define EC_ILLEGAL_COMMAND 0x04 #define EC_BUFFER_FULL 0x05 struct si_sm_data { enum smic_states state; struct si_sm_io *io; unsigned char write_data[MAX_SMIC_WRITE_SIZE]; int write_pos; int write_count; int orig_write_count; unsigned char read_data[MAX_SMIC_READ_SIZE]; int read_pos; int truncated; unsigned int error_retries; long smic_timeout; }; static unsigned int init_smic_data(struct si_sm_data *smic, struct si_sm_io *io) { smic->state = SMIC_IDLE; smic->io = io; smic->write_pos = 0; smic->write_count = 0; smic->orig_write_count = 0; smic->read_pos = 0; smic->error_retries = 0; smic->truncated = 0; smic->smic_timeout = SMIC_RETRY_TIMEOUT; /* We use 3 bytes of I/O. */ return 3; } static int start_smic_transaction(struct si_sm_data *smic, unsigned char *data, unsigned int size) { unsigned int i; if (size < 2) return IPMI_REQ_LEN_INVALID_ERR; if (size > MAX_SMIC_WRITE_SIZE) return IPMI_REQ_LEN_EXCEEDED_ERR; if ((smic->state != SMIC_IDLE) && (smic->state != SMIC_HOSED)) { dev_warn(smic->io->dev, "SMIC in invalid state %d\n", smic->state); return IPMI_NOT_IN_MY_STATE_ERR; } if (smic_debug & SMIC_DEBUG_MSG) { dev_dbg(smic->io->dev, "%s -", __func__); for (i = 0; i < size; i++) pr_cont(" %02x", data[i]); pr_cont("\n"); } smic->error_retries = 0; memcpy(smic->write_data, data, size); smic->write_count = size; smic->orig_write_count = size; smic->write_pos = 0; smic->read_pos = 0; smic->state = SMIC_START_OP; smic->smic_timeout = SMIC_RETRY_TIMEOUT; return 0; } static int smic_get_result(struct si_sm_data *smic, unsigned char *data, unsigned int length) { int i; if (smic_debug & SMIC_DEBUG_MSG) { dev_dbg(smic->io->dev, "smic_get result -"); for (i = 0; i < smic->read_pos; i++) pr_cont(" %02x", smic->read_data[i]); pr_cont("\n"); } if (length < smic->read_pos) { smic->read_pos = length; smic->truncated = 1; } memcpy(data, smic->read_data, smic->read_pos); if ((length >= 3) && (smic->read_pos < 3)) { data[2] = IPMI_ERR_UNSPECIFIED; smic->read_pos = 3; } if (smic->truncated) { data[2] = IPMI_ERR_MSG_TRUNCATED; smic->truncated = 0; } return smic->read_pos; } static inline unsigned char read_smic_flags(struct si_sm_data *smic) { return smic->io->inputb(smic->io, 2); } static inline unsigned char read_smic_status(struct si_sm_data *smic) { return smic->io->inputb(smic->io, 1); } static inline unsigned char read_smic_data(struct si_sm_data *smic) { return smic->io->inputb(smic->io, 0); } static inline void write_smic_flags(struct si_sm_data *smic, unsigned char flags) { smic->io->outputb(smic->io, 2, flags); } static inline void write_smic_control(struct si_sm_data *smic, unsigned char control) { smic->io->outputb(smic->io, 1, control); } static inline void write_si_sm_data(struct si_sm_data *smic, unsigned char data) { smic->io->outputb(smic->io, 0, data); } static inline void start_error_recovery(struct si_sm_data *smic, char *reason) { (smic->error_retries)++; if (smic->error_retries > SMIC_MAX_ERROR_RETRIES) { if (smic_debug & SMIC_DEBUG_ENABLE) pr_warn("ipmi_smic_drv: smic hosed: %s\n", reason); smic->state = SMIC_HOSED; } else { smic->write_count = smic->orig_write_count; smic->write_pos = 0; smic->read_pos = 0; smic->state = SMIC_START_OP; smic->smic_timeout = SMIC_RETRY_TIMEOUT; } } static inline void write_next_byte(struct si_sm_data *smic) { write_si_sm_data(smic, smic->write_data[smic->write_pos]); (smic->write_pos)++; (smic->write_count)--; } static inline void read_next_byte(struct si_sm_data *smic) { if (smic->read_pos >= MAX_SMIC_READ_SIZE) { read_smic_data(smic); smic->truncated = 1; } else { smic->read_data[smic->read_pos] = read_smic_data(smic); smic->read_pos++; } } /* SMIC Control/Status Code Components */ #define SMIC_GET_STATUS 0x00 /* Control form's name */ #define SMIC_READY 0x00 /* Status form's name */ #define SMIC_WR_START 0x01 /* Unified Control/Status names... */ #define SMIC_WR_NEXT 0x02 #define SMIC_WR_END 0x03 #define SMIC_RD_START 0x04 #define SMIC_RD_NEXT 0x05 #define SMIC_RD_END 0x06 #define SMIC_CODE_MASK 0x0f #define SMIC_CONTROL 0x00 #define SMIC_STATUS 0x80 #define SMIC_CS_MASK 0x80 #define SMIC_SMS 0x40 #define SMIC_SMM 0x60 #define SMIC_STREAM_MASK 0x60 /* SMIC Control Codes */ #define SMIC_CC_SMS_GET_STATUS (SMIC_CONTROL|SMIC_SMS|SMIC_GET_STATUS) #define SMIC_CC_SMS_WR_START (SMIC_CONTROL|SMIC_SMS|SMIC_WR_START) #define SMIC_CC_SMS_WR_NEXT (SMIC_CONTROL|SMIC_SMS|SMIC_WR_NEXT) #define SMIC_CC_SMS_WR_END (SMIC_CONTROL|SMIC_SMS|SMIC_WR_END) #define SMIC_CC_SMS_RD_START (SMIC_CONTROL|SMIC_SMS|SMIC_RD_START) #define SMIC_CC_SMS_RD_NEXT (SMIC_CONTROL|SMIC_SMS|SMIC_RD_NEXT) #define SMIC_CC_SMS_RD_END (SMIC_CONTROL|SMIC_SMS|SMIC_RD_END) #define SMIC_CC_SMM_GET_STATUS (SMIC_CONTROL|SMIC_SMM|SMIC_GET_STATUS) #define SMIC_CC_SMM_WR_START (SMIC_CONTROL|SMIC_SMM|SMIC_WR_START) #define SMIC_CC_SMM_WR_NEXT (SMIC_CONTROL|SMIC_SMM|SMIC_WR_NEXT) #define SMIC_CC_SMM_WR_END (SMIC_CONTROL|SMIC_SMM|SMIC_WR_END) #define SMIC_CC_SMM_RD_START (SMIC_CONTROL|SMIC_SMM|SMIC_RD_START) #define SMIC_CC_SMM_RD_NEXT (SMIC_CONTROL|SMIC_SMM|SMIC_RD_NEXT) #define SMIC_CC_SMM_RD_END (SMIC_CONTROL|SMIC_SMM|SMIC_RD_END) /* SMIC Status Codes */ #define SMIC_SC_SMS_READY (SMIC_STATUS|SMIC_SMS|SMIC_READY) #define SMIC_SC_SMS_WR_START (SMIC_STATUS|SMIC_SMS|SMIC_WR_START) #define SMIC_SC_SMS_WR_NEXT (SMIC_STATUS|SMIC_SMS|SMIC_WR_NEXT) #define SMIC_SC_SMS_WR_END (SMIC_STATUS|SMIC_SMS|SMIC_WR_END) #define SMIC_SC_SMS_RD_START (SMIC_STATUS|SMIC_SMS|SMIC_RD_START) #define SMIC_SC_SMS_RD_NEXT (SMIC_STATUS|SMIC_SMS|SMIC_RD_NEXT) #define SMIC_SC_SMS_RD_END (SMIC_STATUS|SMIC_SMS|SMIC_RD_END) #define SMIC_SC_SMM_READY (SMIC_STATUS|SMIC_SMM|SMIC_READY) #define SMIC_SC_SMM_WR_START (SMIC_STATUS|SMIC_SMM|SMIC_WR_START) #define SMIC_SC_SMM_WR_NEXT (SMIC_STATUS|SMIC_SMM|SMIC_WR_NEXT) #define SMIC_SC_SMM_WR_END (SMIC_STATUS|SMIC_SMM|SMIC_WR_END) #define SMIC_SC_SMM_RD_START (SMIC_STATUS|SMIC_SMM|SMIC_RD_START) #define SMIC_SC_SMM_RD_NEXT (SMIC_STATUS|SMIC_SMM|SMIC_RD_NEXT) #define SMIC_SC_SMM_RD_END (SMIC_STATUS|SMIC_SMM|SMIC_RD_END) /* these are the control/status codes we actually use SMIC_CC_SMS_GET_STATUS 0x40 SMIC_CC_SMS_WR_START 0x41 SMIC_CC_SMS_WR_NEXT 0x42 SMIC_CC_SMS_WR_END 0x43 SMIC_CC_SMS_RD_START 0x44 SMIC_CC_SMS_RD_NEXT 0x45 SMIC_CC_SMS_RD_END 0x46 SMIC_SC_SMS_READY 0xC0 SMIC_SC_SMS_WR_START 0xC1 SMIC_SC_SMS_WR_NEXT 0xC2 SMIC_SC_SMS_WR_END 0xC3 SMIC_SC_SMS_RD_START 0xC4 SMIC_SC_SMS_RD_NEXT 0xC5 SMIC_SC_SMS_RD_END 0xC6 */ static enum si_sm_result smic_event(struct si_sm_data *smic, long time) { unsigned char status; unsigned char flags; unsigned char data; if (smic->state == SMIC_HOSED) { init_smic_data(smic, smic->io); return SI_SM_HOSED; } if (smic->state != SMIC_IDLE) { if (smic_debug & SMIC_DEBUG_STATES) dev_dbg(smic->io->dev, "%s - smic->smic_timeout = %ld, time = %ld\n", __func__, smic->smic_timeout, time); /* * FIXME: smic_event is sometimes called with time > * SMIC_RETRY_TIMEOUT */ if (time < SMIC_RETRY_TIMEOUT) { smic->smic_timeout -= time; if (smic->smic_timeout < 0) { start_error_recovery(smic, "smic timed out."); return SI_SM_CALL_WITH_DELAY; } } } flags = read_smic_flags(smic); if (flags & SMIC_FLAG_BSY) return SI_SM_CALL_WITH_DELAY; status = read_smic_status(smic); if (smic_debug & SMIC_DEBUG_STATES) dev_dbg(smic->io->dev, "%s - state = %d, flags = 0x%02x, status = 0x%02x\n", __func__, smic->state, flags, status); switch (smic->state) { case SMIC_IDLE: /* in IDLE we check for available messages */ if (flags & SMIC_SMS_DATA_AVAIL) return SI_SM_ATTN; return SI_SM_IDLE; case SMIC_START_OP: /* sanity check whether smic is really idle */ write_smic_control(smic, SMIC_CC_SMS_GET_STATUS); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_OP_OK; break; case SMIC_OP_OK: if (status != SMIC_SC_SMS_READY) { /* this should not happen */ start_error_recovery(smic, "state = SMIC_OP_OK," " status != SMIC_SC_SMS_READY"); return SI_SM_CALL_WITH_DELAY; } /* OK so far; smic is idle let us start ... */ write_smic_control(smic, SMIC_CC_SMS_WR_START); write_next_byte(smic); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_WRITE_START; break; case SMIC_WRITE_START: if (status != SMIC_SC_SMS_WR_START) { start_error_recovery(smic, "state = SMIC_WRITE_START, " "status != SMIC_SC_SMS_WR_START"); return SI_SM_CALL_WITH_DELAY; } /* * we must not issue WR_(NEXT|END) unless * TX_DATA_READY is set * */ if (flags & SMIC_TX_DATA_READY) { if (smic->write_count == 1) { /* last byte */ write_smic_control(smic, SMIC_CC_SMS_WR_END); smic->state = SMIC_WRITE_END; } else { write_smic_control(smic, SMIC_CC_SMS_WR_NEXT); smic->state = SMIC_WRITE_NEXT; } write_next_byte(smic); write_smic_flags(smic, flags | SMIC_FLAG_BSY); } else return SI_SM_CALL_WITH_DELAY; break; case SMIC_WRITE_NEXT: if (status != SMIC_SC_SMS_WR_NEXT) { start_error_recovery(smic, "state = SMIC_WRITE_NEXT, " "status != SMIC_SC_SMS_WR_NEXT"); return SI_SM_CALL_WITH_DELAY; } /* this is the same code as in SMIC_WRITE_START */ if (flags & SMIC_TX_DATA_READY) { if (smic->write_count == 1) { write_smic_control(smic, SMIC_CC_SMS_WR_END); smic->state = SMIC_WRITE_END; } else { write_smic_control(smic, SMIC_CC_SMS_WR_NEXT); smic->state = SMIC_WRITE_NEXT; } write_next_byte(smic); write_smic_flags(smic, flags | SMIC_FLAG_BSY); } else return SI_SM_CALL_WITH_DELAY; break; case SMIC_WRITE_END: if (status != SMIC_SC_SMS_WR_END) { start_error_recovery(smic, "state = SMIC_WRITE_END, " "status != SMIC_SC_SMS_WR_END"); return SI_SM_CALL_WITH_DELAY; } /* data register holds an error code */ data = read_smic_data(smic); if (data != 0) { if (smic_debug & SMIC_DEBUG_ENABLE) dev_dbg(smic->io->dev, "SMIC_WRITE_END: data = %02x\n", data); start_error_recovery(smic, "state = SMIC_WRITE_END, " "data != SUCCESS"); return SI_SM_CALL_WITH_DELAY; } else smic->state = SMIC_WRITE2READ; break; case SMIC_WRITE2READ: /* * we must wait for RX_DATA_READY to be set before we * can continue */ if (flags & SMIC_RX_DATA_READY) { write_smic_control(smic, SMIC_CC_SMS_RD_START); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_READ_START; } else return SI_SM_CALL_WITH_DELAY; break; case SMIC_READ_START: if (status != SMIC_SC_SMS_RD_START) { start_error_recovery(smic, "state = SMIC_READ_START, " "status != SMIC_SC_SMS_RD_START"); return SI_SM_CALL_WITH_DELAY; } if (flags & SMIC_RX_DATA_READY) { read_next_byte(smic); write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_READ_NEXT; } else return SI_SM_CALL_WITH_DELAY; break; case SMIC_READ_NEXT: switch (status) { /* * smic tells us that this is the last byte to be read * --> clean up */ case SMIC_SC_SMS_RD_END: read_next_byte(smic); write_smic_control(smic, SMIC_CC_SMS_RD_END); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_READ_END; break; case SMIC_SC_SMS_RD_NEXT: if (flags & SMIC_RX_DATA_READY) { read_next_byte(smic); write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_READ_NEXT; } else return SI_SM_CALL_WITH_DELAY; break; default: start_error_recovery( smic, "state = SMIC_READ_NEXT, " "status != SMIC_SC_SMS_RD_(NEXT|END)"); return SI_SM_CALL_WITH_DELAY; } break; case SMIC_READ_END: if (status != SMIC_SC_SMS_READY) { start_error_recovery(smic, "state = SMIC_READ_END, " "status != SMIC_SC_SMS_READY"); return SI_SM_CALL_WITH_DELAY; } data = read_smic_data(smic); /* data register holds an error code */ if (data != 0) { if (smic_debug & SMIC_DEBUG_ENABLE) dev_dbg(smic->io->dev, "SMIC_READ_END: data = %02x\n", data); start_error_recovery(smic, "state = SMIC_READ_END, " "data != SUCCESS"); return SI_SM_CALL_WITH_DELAY; } else { smic->state = SMIC_IDLE; return SI_SM_TRANSACTION_COMPLETE; } case SMIC_HOSED: init_smic_data(smic, smic->io); return SI_SM_HOSED; default: if (smic_debug & SMIC_DEBUG_ENABLE) { dev_dbg(smic->io->dev, "smic->state = %d\n", smic->state); start_error_recovery(smic, "state = UNKNOWN"); return SI_SM_CALL_WITH_DELAY; } } smic->smic_timeout = SMIC_RETRY_TIMEOUT; return SI_SM_CALL_WITHOUT_DELAY; } static int smic_detect(struct si_sm_data *smic) { /* * It's impossible for the SMIC fnags register to be all 1's, * (assuming a properly functioning, self-initialized BMC) * but that's what you get from reading a bogus address, so we * test that first. */ if (read_smic_flags(smic) == 0xff) return 1; return 0; } static void smic_cleanup(struct si_sm_data *kcs) { } static int smic_size(void) { return sizeof(struct si_sm_data); } const struct si_sm_handlers smic_smi_handlers = { .init_data = init_smic_data, .start_transaction = start_smic_transaction, .get_result = smic_get_result, .event = smic_event, .detect = smic_detect, .cleanup = smic_cleanup, .size = smic_size, };
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1