Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Linus Torvalds | 1772 | 75.15% | 2 | 8.00% |
Alan Cox | 203 | 8.61% | 4 | 16.00% |
Arnd Bergmann | 136 | 5.77% | 4 | 16.00% |
Andrew Morton | 100 | 4.24% | 3 | 12.00% |
Gustavo A. R. Silva | 45 | 1.91% | 1 | 4.00% |
Roel Kluin | 38 | 1.61% | 1 | 4.00% |
Al Viro | 35 | 1.48% | 4 | 16.00% |
Art Haas | 12 | 0.51% | 1 | 4.00% |
David Howells | 12 | 0.51% | 1 | 4.00% |
Eric Sesterhenn / Snakebyte | 3 | 0.13% | 2 | 8.00% |
Yani Ioannou | 1 | 0.04% | 1 | 4.00% |
Arjan van de Ven | 1 | 0.04% | 1 | 4.00% |
Total | 2358 | 25 |
/* * * mwavedd.c -- mwave device driver * * * Written By: Mike Sullivan IBM Corporation * * Copyright (C) 1999 IBM Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * NO WARRANTY * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is * solely responsible for determining the appropriateness of using and * distributing the Program and assumes all risks associated with its * exercise of rights under this Agreement, including but not limited to * the risks and costs of program errors, damage to or loss of data, * programs or equipment, and unavailability or interruption of operations. * * DISCLAIMER OF LIABILITY * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * * 10/23/2000 - Alpha Release * First release to the public */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/fs.h> #include <linux/init.h> #include <linux/major.h> #include <linux/miscdevice.h> #include <linux/device.h> #include <linux/serial.h> #include <linux/sched.h> #include <linux/spinlock.h> #include <linux/mutex.h> #include <linux/delay.h> #include <linux/serial_8250.h> #include <linux/nospec.h> #include "smapi.h" #include "mwavedd.h" #include "3780i.h" #include "tp3780i.h" MODULE_DESCRIPTION("3780i Advanced Communications Processor (Mwave) driver"); MODULE_AUTHOR("Mike Sullivan and Paul Schroeder"); MODULE_LICENSE("GPL"); /* * These parameters support the setting of MWave resources. Note that no * checks are made against other devices (ie. superio) for conflicts. * We'll depend on users using the tpctl utility to do that for now */ static DEFINE_MUTEX(mwave_mutex); int mwave_debug = 0; int mwave_3780i_irq = 0; int mwave_3780i_io = 0; int mwave_uart_irq = 0; int mwave_uart_io = 0; module_param(mwave_debug, int, 0); module_param_hw(mwave_3780i_irq, int, irq, 0); module_param_hw(mwave_3780i_io, int, ioport, 0); module_param_hw(mwave_uart_irq, int, irq, 0); module_param_hw(mwave_uart_io, int, ioport, 0); static int mwave_open(struct inode *inode, struct file *file); static int mwave_close(struct inode *inode, struct file *file); static long mwave_ioctl(struct file *filp, unsigned int iocmd, unsigned long ioarg); MWAVE_DEVICE_DATA mwave_s_mdd; static int mwave_open(struct inode *inode, struct file *file) { unsigned int retval = 0; PRINTK_3(TRACE_MWAVE, "mwavedd::mwave_open, entry inode %p file %p\n", inode, file); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_open, exit return retval %x\n", retval); return retval; } static int mwave_close(struct inode *inode, struct file *file) { unsigned int retval = 0; PRINTK_3(TRACE_MWAVE, "mwavedd::mwave_close, entry inode %p file %p\n", inode, file); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_close, exit retval %x\n", retval); return retval; } static long mwave_ioctl(struct file *file, unsigned int iocmd, unsigned long ioarg) { unsigned int retval = 0; pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; void __user *arg = (void __user *)ioarg; PRINTK_4(TRACE_MWAVE, "mwavedd::mwave_ioctl, entry file %p cmd %x arg %x\n", file, iocmd, (int) ioarg); switch (iocmd) { case IOCTL_MW_RESET: PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_ioctl, IOCTL_MW_RESET" " calling tp3780I_ResetDSP\n"); mutex_lock(&mwave_mutex); retval = tp3780I_ResetDSP(&pDrvData->rBDData); mutex_unlock(&mwave_mutex); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, IOCTL_MW_RESET" " retval %x from tp3780I_ResetDSP\n", retval); break; case IOCTL_MW_RUN: PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_ioctl, IOCTL_MW_RUN" " calling tp3780I_StartDSP\n"); mutex_lock(&mwave_mutex); retval = tp3780I_StartDSP(&pDrvData->rBDData); mutex_unlock(&mwave_mutex); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, IOCTL_MW_RUN" " retval %x from tp3780I_StartDSP\n", retval); break; case IOCTL_MW_DSP_ABILITIES: { MW_ABILITIES rAbilities; PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_ioctl," " IOCTL_MW_DSP_ABILITIES calling" " tp3780I_QueryAbilities\n"); mutex_lock(&mwave_mutex); retval = tp3780I_QueryAbilities(&pDrvData->rBDData, &rAbilities); mutex_unlock(&mwave_mutex); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES" " retval %x from tp3780I_QueryAbilities\n", retval); if (retval == 0) { if( copy_to_user(arg, &rAbilities, sizeof(MW_ABILITIES)) ) return -EFAULT; } PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES" " exit retval %x\n", retval); } break; case IOCTL_MW_READ_DATA: case IOCTL_MW_READCLEAR_DATA: { MW_READWRITE rReadData; unsigned short __user *pusBuffer = NULL; if( copy_from_user(&rReadData, arg, sizeof(MW_READWRITE)) ) return -EFAULT; pusBuffer = (unsigned short __user *) (rReadData.pBuf); PRINTK_4(TRACE_MWAVE, "mwavedd::mwave_ioctl IOCTL_MW_READ_DATA," " size %lx, ioarg %lx pusBuffer %p\n", rReadData.ulDataLength, ioarg, pusBuffer); mutex_lock(&mwave_mutex); retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, iocmd, pusBuffer, rReadData.ulDataLength, rReadData.usDspAddress); mutex_unlock(&mwave_mutex); } break; case IOCTL_MW_READ_INST: { MW_READWRITE rReadData; unsigned short __user *pusBuffer = NULL; if( copy_from_user(&rReadData, arg, sizeof(MW_READWRITE)) ) return -EFAULT; pusBuffer = (unsigned short __user *) (rReadData.pBuf); PRINTK_4(TRACE_MWAVE, "mwavedd::mwave_ioctl IOCTL_MW_READ_INST," " size %lx, ioarg %lx pusBuffer %p\n", rReadData.ulDataLength / 2, ioarg, pusBuffer); mutex_lock(&mwave_mutex); retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, iocmd, pusBuffer, rReadData.ulDataLength / 2, rReadData.usDspAddress); mutex_unlock(&mwave_mutex); } break; case IOCTL_MW_WRITE_DATA: { MW_READWRITE rWriteData; unsigned short __user *pusBuffer = NULL; if( copy_from_user(&rWriteData, arg, sizeof(MW_READWRITE)) ) return -EFAULT; pusBuffer = (unsigned short __user *) (rWriteData.pBuf); PRINTK_4(TRACE_MWAVE, "mwavedd::mwave_ioctl IOCTL_MW_WRITE_DATA," " size %lx, ioarg %lx pusBuffer %p\n", rWriteData.ulDataLength, ioarg, pusBuffer); mutex_lock(&mwave_mutex); retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, iocmd, pusBuffer, rWriteData.ulDataLength, rWriteData.usDspAddress); mutex_unlock(&mwave_mutex); } break; case IOCTL_MW_WRITE_INST: { MW_READWRITE rWriteData; unsigned short __user *pusBuffer = NULL; if( copy_from_user(&rWriteData, arg, sizeof(MW_READWRITE)) ) return -EFAULT; pusBuffer = (unsigned short __user *)(rWriteData.pBuf); PRINTK_4(TRACE_MWAVE, "mwavedd::mwave_ioctl IOCTL_MW_WRITE_INST," " size %lx, ioarg %lx pusBuffer %p\n", rWriteData.ulDataLength, ioarg, pusBuffer); mutex_lock(&mwave_mutex); retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData, iocmd, pusBuffer, rWriteData.ulDataLength, rWriteData.usDspAddress); mutex_unlock(&mwave_mutex); } break; case IOCTL_MW_REGISTER_IPC: { unsigned int ipcnum = (unsigned int) ioarg; if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::mwave_ioctl:" " IOCTL_MW_REGISTER_IPC:" " Error: Invalid ipcnum %x\n", ipcnum); return -EINVAL; } ipcnum = array_index_nospec(ipcnum, ARRAY_SIZE(pDrvData->IPCs)); PRINTK_3(TRACE_MWAVE, "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC" " ipcnum %x entry usIntCount %x\n", ipcnum, pDrvData->IPCs[ipcnum].usIntCount); mutex_lock(&mwave_mutex); pDrvData->IPCs[ipcnum].bIsHere = false; pDrvData->IPCs[ipcnum].bIsEnabled = true; mutex_unlock(&mwave_mutex); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC" " ipcnum %x exit\n", ipcnum); } break; case IOCTL_MW_GET_IPC: { unsigned int ipcnum = (unsigned int) ioarg; if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::mwave_ioctl:" " IOCTL_MW_GET_IPC: Error:" " Invalid ipcnum %x\n", ipcnum); return -EINVAL; } ipcnum = array_index_nospec(ipcnum, ARRAY_SIZE(pDrvData->IPCs)); PRINTK_3(TRACE_MWAVE, "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC" " ipcnum %x, usIntCount %x\n", ipcnum, pDrvData->IPCs[ipcnum].usIntCount); mutex_lock(&mwave_mutex); if (pDrvData->IPCs[ipcnum].bIsEnabled == true) { DECLARE_WAITQUEUE(wait, current); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, thread for" " ipc %x going to sleep\n", ipcnum); add_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait); pDrvData->IPCs[ipcnum].bIsHere = true; set_current_state(TASK_INTERRUPTIBLE); /* check whether an event was signalled by */ /* the interrupt handler while we were gone */ if (pDrvData->IPCs[ipcnum].usIntCount == 1) { /* first int has occurred (race condition) */ pDrvData->IPCs[ipcnum].usIntCount = 2; /* first int has been handled */ PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl" " IOCTL_MW_GET_IPC ipcnum %x" " handling first int\n", ipcnum); } else { /* either 1st int has not yet occurred, or we have already handled the first int */ schedule(); if (pDrvData->IPCs[ipcnum].usIntCount == 1) { pDrvData->IPCs[ipcnum].usIntCount = 2; } PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl" " IOCTL_MW_GET_IPC ipcnum %x" " woke up and returning to" " application\n", ipcnum); } pDrvData->IPCs[ipcnum].bIsHere = false; remove_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait); set_current_state(TASK_RUNNING); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC," " returning thread for ipc %x" " processing\n", ipcnum); } mutex_unlock(&mwave_mutex); } break; case IOCTL_MW_UNREGISTER_IPC: { unsigned int ipcnum = (unsigned int) ioarg; PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl IOCTL_MW_UNREGISTER_IPC" " ipcnum %x\n", ipcnum); if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::mwave_ioctl:" " IOCTL_MW_UNREGISTER_IPC:" " Error: Invalid ipcnum %x\n", ipcnum); return -EINVAL; } ipcnum = array_index_nospec(ipcnum, ARRAY_SIZE(pDrvData->IPCs)); mutex_lock(&mwave_mutex); if (pDrvData->IPCs[ipcnum].bIsEnabled == true) { pDrvData->IPCs[ipcnum].bIsEnabled = false; if (pDrvData->IPCs[ipcnum].bIsHere == true) { wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue); } } mutex_unlock(&mwave_mutex); } break; default: return -ENOTTY; } /* switch */ PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, exit retval %x\n", retval); return retval; } static ssize_t mwave_read(struct file *file, char __user *buf, size_t count, loff_t * ppos) { PRINTK_5(TRACE_MWAVE, "mwavedd::mwave_read entry file %p, buf %p, count %zx ppos %p\n", file, buf, count, ppos); return -EINVAL; } static ssize_t mwave_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos) { PRINTK_5(TRACE_MWAVE, "mwavedd::mwave_write entry file %p, buf %p," " count %zx ppos %p\n", file, buf, count, ppos); return -EINVAL; } static int register_serial_portandirq(unsigned int port, int irq) { struct uart_8250_port uart; switch ( port ) { case 0x3f8: case 0x2f8: case 0x3e8: case 0x2e8: /* OK */ break; default: PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::register_serial_portandirq:" " Error: Illegal port %x\n", port ); return -1; } /* switch */ /* port is okay */ switch ( irq ) { case 3: case 4: case 5: case 7: /* OK */ break; default: PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::register_serial_portandirq:" " Error: Illegal irq %x\n", irq ); return -1; } /* switch */ /* irq is okay */ memset(&uart, 0, sizeof(uart)); uart.port.uartclk = 1843200; uart.port.iobase = port; uart.port.irq = irq; uart.port.iotype = UPIO_PORT; uart.port.flags = UPF_SHARE_IRQ; return serial8250_register_8250_port(&uart); } static const struct file_operations mwave_fops = { .owner = THIS_MODULE, .read = mwave_read, .write = mwave_write, .unlocked_ioctl = mwave_ioctl, .open = mwave_open, .release = mwave_close, .llseek = default_llseek, }; static struct miscdevice mwave_misc_dev = { MWAVE_MINOR, "mwave", &mwave_fops }; #if 0 /* totally b0rked */ /* * sysfs support <paulsch@us.ibm.com> */ struct device mwave_device; /* Prevent code redundancy, create a macro for mwave_show_* functions. */ #define mwave_show_function(attr_name, format_string, field) \ static ssize_t mwave_show_##attr_name(struct device *dev, struct device_attribute *attr, char *buf) \ { \ DSP_3780I_CONFIG_SETTINGS *pSettings = \ &mwave_s_mdd.rBDData.rDspSettings; \ return sprintf(buf, format_string, pSettings->field); \ } /* All of our attributes are read attributes. */ #define mwave_dev_rd_attr(attr_name, format_string, field) \ mwave_show_function(attr_name, format_string, field) \ static DEVICE_ATTR(attr_name, S_IRUGO, mwave_show_##attr_name, NULL) mwave_dev_rd_attr (3780i_dma, "%i\n", usDspDma); mwave_dev_rd_attr (3780i_irq, "%i\n", usDspIrq); mwave_dev_rd_attr (3780i_io, "%#.4x\n", usDspBaseIO); mwave_dev_rd_attr (uart_irq, "%i\n", usUartIrq); mwave_dev_rd_attr (uart_io, "%#.4x\n", usUartBaseIO); static struct device_attribute * const mwave_dev_attrs[] = { &dev_attr_3780i_dma, &dev_attr_3780i_irq, &dev_attr_3780i_io, &dev_attr_uart_irq, &dev_attr_uart_io, }; #endif /* * mwave_init is called on module load * * mwave_exit is called on module unload * mwave_exit is also used to clean up after an aborted mwave_init */ static void mwave_exit(void) { pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit entry\n"); #if 0 for (i = 0; i < pDrvData->nr_registered_attrs; i++) device_remove_file(&mwave_device, mwave_dev_attrs[i]); pDrvData->nr_registered_attrs = 0; if (pDrvData->device_registered) { device_unregister(&mwave_device); pDrvData->device_registered = false; } #endif if ( pDrvData->sLine >= 0 ) { serial8250_unregister_port(pDrvData->sLine); } if (pDrvData->bMwaveDevRegistered) { misc_deregister(&mwave_misc_dev); } if (pDrvData->bDSPEnabled) { tp3780I_DisableDSP(&pDrvData->rBDData); } if (pDrvData->bResourcesClaimed) { tp3780I_ReleaseResources(&pDrvData->rBDData); } if (pDrvData->bBDInitialized) { tp3780I_Cleanup(&pDrvData->rBDData); } PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit exit\n"); } module_exit(mwave_exit); static int __init mwave_init(void) { int i; int retval = 0; pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_init entry\n"); memset(&mwave_s_mdd, 0, sizeof(MWAVE_DEVICE_DATA)); pDrvData->bBDInitialized = false; pDrvData->bResourcesClaimed = false; pDrvData->bDSPEnabled = false; pDrvData->bDSPReset = false; pDrvData->bMwaveDevRegistered = false; pDrvData->sLine = -1; for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) { pDrvData->IPCs[i].bIsEnabled = false; pDrvData->IPCs[i].bIsHere = false; pDrvData->IPCs[i].usIntCount = 0; /* no ints received yet */ init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue); } retval = tp3780I_InitializeBoardData(&pDrvData->rBDData); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_init, return from tp3780I_InitializeBoardData" " retval %x\n", retval); if (retval) { PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::mwave_init: Error:" " Failed to initialize board data\n"); goto cleanup_error; } pDrvData->bBDInitialized = true; retval = tp3780I_CalcResources(&pDrvData->rBDData); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_init, return from tp3780I_CalcResources" " retval %x\n", retval); if (retval) { PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd:mwave_init: Error:" " Failed to calculate resources\n"); goto cleanup_error; } retval = tp3780I_ClaimResources(&pDrvData->rBDData); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_init, return from tp3780I_ClaimResources" " retval %x\n", retval); if (retval) { PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd:mwave_init: Error:" " Failed to claim resources\n"); goto cleanup_error; } pDrvData->bResourcesClaimed = true; retval = tp3780I_EnableDSP(&pDrvData->rBDData); PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_init, return from tp3780I_EnableDSP" " retval %x\n", retval); if (retval) { PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd:mwave_init: Error:" " Failed to enable DSP\n"); goto cleanup_error; } pDrvData->bDSPEnabled = true; if (misc_register(&mwave_misc_dev) < 0) { PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd:mwave_init: Error:" " Failed to register misc device\n"); goto cleanup_error; } pDrvData->bMwaveDevRegistered = true; pDrvData->sLine = register_serial_portandirq( pDrvData->rBDData.rDspSettings.usUartBaseIO, pDrvData->rBDData.rDspSettings.usUartIrq ); if (pDrvData->sLine < 0) { PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd:mwave_init: Error:" " Failed to register serial driver\n"); goto cleanup_error; } /* uart is registered */ #if 0 /* sysfs */ memset(&mwave_device, 0, sizeof (struct device)); dev_set_name(&mwave_device, "mwave"); if (device_register(&mwave_device)) goto cleanup_error; pDrvData->device_registered = true; for (i = 0; i < ARRAY_SIZE(mwave_dev_attrs); i++) { if(device_create_file(&mwave_device, mwave_dev_attrs[i])) { PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd:mwave_init: Error:" " Failed to create sysfs file %s\n", mwave_dev_attrs[i]->attr.name); goto cleanup_error; } pDrvData->nr_registered_attrs++; } #endif /* SUCCESS! */ return 0; cleanup_error: PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::mwave_init: Error:" " Failed to initialize\n"); mwave_exit(); /* clean up */ return -EIO; } module_init(mwave_init);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1