Contributors: 14
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Kevin Hilman |
327 |
41.39% |
5 |
13.16% |
| Nishanth Menon |
140 |
17.72% |
9 |
23.68% |
| Tony Lindgren |
136 |
17.22% |
1 |
2.63% |
| Viresh Kumar |
84 |
10.63% |
10 |
26.32% |
| Santosh Shilimkar |
26 |
3.29% |
1 |
2.63% |
| Afzal Mohammed |
25 |
3.16% |
1 |
2.63% |
| Hiroshi Doyu |
18 |
2.28% |
1 |
2.63% |
| Russell King |
10 |
1.27% |
3 |
7.89% |
| Joe Perches |
10 |
1.27% |
2 |
5.26% |
| Rajendra Nayak |
8 |
1.01% |
1 |
2.63% |
| Arnd Bergmann |
2 |
0.25% |
1 |
2.63% |
| Thomas Gleixner |
2 |
0.25% |
1 |
2.63% |
| Yangtao Li |
1 |
0.13% |
1 |
2.63% |
| Paul Walmsley |
1 |
0.13% |
1 |
2.63% |
| Total |
790 |
|
38 |
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* CPU frequency scaling for OMAP using OPP information
*
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
* Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
*
* Copyright (C) 2007-2011 Texas Instruments, Inc.
* - OMAP3/4 support by Rajendra Nayak, Santosh Shilimkar
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/pm_opp.h>
#include <linux/cpu.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <asm/smp_plat.h>
#include <asm/cpu.h>
/* OPP tolerance in percentage */
#define OPP_TOLERANCE 4
static struct cpufreq_frequency_table *freq_table;
static atomic_t freq_table_users = ATOMIC_INIT(0);
static struct device *mpu_dev;
static struct regulator *mpu_reg;
static int omap_target(struct cpufreq_policy *policy, unsigned int index)
{
int r, ret;
struct dev_pm_opp *opp;
unsigned long freq, volt = 0, volt_old = 0, tol = 0;
unsigned int old_freq, new_freq;
old_freq = policy->cur;
new_freq = freq_table[index].frequency;
freq = new_freq * 1000;
ret = clk_round_rate(policy->clk, freq);
if (ret < 0) {
dev_warn(mpu_dev,
"CPUfreq: Cannot find matching frequency for %lu\n",
freq);
return ret;
}
freq = ret;
if (mpu_reg) {
opp = dev_pm_opp_find_freq_ceil(mpu_dev, &freq);
if (IS_ERR(opp)) {
dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n",
__func__, new_freq);
return -EINVAL;
}
volt = dev_pm_opp_get_voltage(opp);
dev_pm_opp_put(opp);
tol = volt * OPP_TOLERANCE / 100;
volt_old = regulator_get_voltage(mpu_reg);
}
dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n",
old_freq / 1000, volt_old ? volt_old / 1000 : -1,
new_freq / 1000, volt ? volt / 1000 : -1);
/* scaling up? scale voltage before frequency */
if (mpu_reg && (new_freq > old_freq)) {
r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
if (r < 0) {
dev_warn(mpu_dev, "%s: unable to scale voltage up.\n",
__func__);
return r;
}
}
ret = clk_set_rate(policy->clk, new_freq * 1000);
/* scaling down? scale voltage after frequency */
if (mpu_reg && (new_freq < old_freq)) {
r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
if (r < 0) {
dev_warn(mpu_dev, "%s: unable to scale voltage down.\n",
__func__);
clk_set_rate(policy->clk, old_freq * 1000);
return r;
}
}
return ret;
}
static inline void freq_table_free(void)
{
if (atomic_dec_and_test(&freq_table_users))
dev_pm_opp_free_cpufreq_table(mpu_dev, &freq_table);
}
static int omap_cpu_init(struct cpufreq_policy *policy)
{
int result;
policy->clk = clk_get(NULL, "cpufreq_ck");
if (IS_ERR(policy->clk))
return PTR_ERR(policy->clk);
if (!freq_table) {
result = dev_pm_opp_init_cpufreq_table(mpu_dev, &freq_table);
if (result) {
dev_err(mpu_dev,
"%s: cpu%d: failed creating freq table[%d]\n",
__func__, policy->cpu, result);
clk_put(policy->clk);
return result;
}
}
atomic_inc_return(&freq_table_users);
/* FIXME: what's the actual transition time? */
cpufreq_generic_init(policy, freq_table, 300 * 1000);
return 0;
}
static int omap_cpu_exit(struct cpufreq_policy *policy)
{
freq_table_free();
clk_put(policy->clk);
return 0;
}
static struct cpufreq_driver omap_driver = {
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = omap_target,
.get = cpufreq_generic_get,
.init = omap_cpu_init,
.exit = omap_cpu_exit,
.register_em = cpufreq_register_em_with_opp,
.name = "omap",
.attr = cpufreq_generic_attr,
};
static int omap_cpufreq_probe(struct platform_device *pdev)
{
mpu_dev = get_cpu_device(0);
if (!mpu_dev) {
pr_warn("%s: unable to get the MPU device\n", __func__);
return -EINVAL;
}
mpu_reg = regulator_get(mpu_dev, "vcc");
if (IS_ERR(mpu_reg)) {
pr_warn("%s: unable to get MPU regulator\n", __func__);
mpu_reg = NULL;
} else {
/*
* Ensure physical regulator is present.
* (e.g. could be dummy regulator.)
*/
if (regulator_get_voltage(mpu_reg) < 0) {
pr_warn("%s: physical regulator not present for MPU\n",
__func__);
regulator_put(mpu_reg);
mpu_reg = NULL;
}
}
return cpufreq_register_driver(&omap_driver);
}
static int omap_cpufreq_remove(struct platform_device *pdev)
{
return cpufreq_unregister_driver(&omap_driver);
}
static struct platform_driver omap_cpufreq_platdrv = {
.driver = {
.name = "omap-cpufreq",
},
.probe = omap_cpufreq_probe,
.remove = omap_cpufreq_remove,
};
module_platform_driver(omap_cpufreq_platdrv);
MODULE_DESCRIPTION("cpufreq driver for OMAP SoCs");
MODULE_LICENSE("GPL");