Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Harry Ciao | 289 | 98.97% | 1 | 33.33% |
Thomas Gleixner | 2 | 0.68% | 1 | 33.33% |
Uwe Kleine-König | 1 | 0.34% | 1 | 33.33% |
Total | 292 | 3 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * amd8131_edac.h, EDAC defs for AMD8131 hypertransport chip * * Copyright (c) 2008 Wind River Systems, Inc. * * Authors: Cao Qingtao <qingtao.cao@windriver.com> * Benjamin Walsh <benjamin.walsh@windriver.com> * Hu Yongqi <yongqi.hu@windriver.com> */ #ifndef _AMD8131_EDAC_H_ #define _AMD8131_EDAC_H_ #define DEVFN_PCIX_BRIDGE_NORTH_A 8 #define DEVFN_PCIX_BRIDGE_NORTH_B 16 #define DEVFN_PCIX_BRIDGE_SOUTH_A 24 #define DEVFN_PCIX_BRIDGE_SOUTH_B 32 /************************************************************ * PCI-X Bridge Status and Command Register, DevA:0x04 ************************************************************/ #define REG_STS_CMD 0x04 enum sts_cmd_bits { STS_CMD_SSE = BIT(30), STS_CMD_SERREN = BIT(8) }; /************************************************************ * PCI-X Bridge Interrupt and Bridge Control Register, ************************************************************/ #define REG_INT_CTLR 0x3c enum int_ctlr_bits { INT_CTLR_DTSE = BIT(27), INT_CTLR_DTS = BIT(26), INT_CTLR_SERR = BIT(17), INT_CTLR_PERR = BIT(16) }; /************************************************************ * PCI-X Bridge Memory Base-Limit Register, DevA:0x1C ************************************************************/ #define REG_MEM_LIM 0x1c enum mem_limit_bits { MEM_LIMIT_DPE = BIT(31), MEM_LIMIT_RSE = BIT(30), MEM_LIMIT_RMA = BIT(29), MEM_LIMIT_RTA = BIT(28), MEM_LIMIT_STA = BIT(27), MEM_LIMIT_MDPE = BIT(24), MEM_LIMIT_MASK = MEM_LIMIT_DPE|MEM_LIMIT_RSE|MEM_LIMIT_RMA| MEM_LIMIT_RTA|MEM_LIMIT_STA|MEM_LIMIT_MDPE }; /************************************************************ * Link Configuration And Control Register, side A ************************************************************/ #define REG_LNK_CTRL_A 0xc4 /************************************************************ * Link Configuration And Control Register, side B ************************************************************/ #define REG_LNK_CTRL_B 0xc8 enum lnk_ctrl_bits { LNK_CTRL_CRCERR_A = BIT(9), LNK_CTRL_CRCERR_B = BIT(8), LNK_CTRL_CRCFEN = BIT(1) }; enum pcix_bridge_inst { NORTH_A = 0, NORTH_B = 1, SOUTH_A = 2, SOUTH_B = 3, NO_BRIDGE = 4 }; struct amd8131_dev_info { int devfn; enum pcix_bridge_inst inst; struct pci_dev *dev; int edac_idx; /* pci device index */ char *ctl_name; struct edac_pci_ctl_info *edac_dev; }; /* * AMD8131 chipset has two pairs of PCIX Bridge and related IOAPIC * Controller, and ATCA-6101 has two AMD8131 chipsets, so there are * four PCIX Bridges on ATCA-6101 altogether. * * These PCIX Bridges share the same PCI Device ID and are all of * Function Zero, they could be discrimated by their pci_dev->devfn. * They share the same set of init/check/exit methods, and their * private structures are collected in the devices[] array. */ struct amd8131_info { u16 err_dev; /* PCI Device ID for AMD8131 APIC*/ struct amd8131_dev_info *devices; void (*init)(struct amd8131_dev_info *dev_info); void (*exit)(struct amd8131_dev_info *dev_info); void (*check)(struct edac_pci_ctl_info *edac_dev); }; #endif /* _AMD8131_EDAC_H_ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1