Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Hao Wu | 1315 | 97.19% | 3 | 50.00% |
Russ Weight | 36 | 2.66% | 1 | 16.67% |
Colin Ian King | 1 | 0.07% | 1 | 16.67% |
Alan Tull | 1 | 0.07% | 1 | 16.67% |
Total | 1353 | 6 |
// SPDX-License-Identifier: GPL-2.0 /* * FPGA Manager Driver for FPGA Management Engine (FME) * * Copyright (C) 2017-2018 Intel Corporation, Inc. * * Authors: * Kang Luwei <luwei.kang@intel.com> * Xiao Guangrong <guangrong.xiao@linux.intel.com> * Wu Hao <hao.wu@intel.com> * Joseph Grecco <joe.grecco@intel.com> * Enno Luebbers <enno.luebbers@intel.com> * Tim Whisonant <tim.whisonant@intel.com> * Ananda Ravuri <ananda.ravuri@intel.com> * Christopher Rauer <christopher.rauer@intel.com> * Henry Mitchel <henry.mitchel@intel.com> */ #include <linux/bitfield.h> #include <linux/module.h> #include <linux/iopoll.h> #include <linux/io-64-nonatomic-lo-hi.h> #include <linux/fpga/fpga-mgr.h> #include "dfl-fme-pr.h" /* FME Partial Reconfiguration Sub Feature Register Set */ #define FME_PR_DFH 0x0 #define FME_PR_CTRL 0x8 #define FME_PR_STS 0x10 #define FME_PR_DATA 0x18 #define FME_PR_ERR 0x20 #define FME_PR_INTFC_ID_L 0xA8 #define FME_PR_INTFC_ID_H 0xB0 /* FME PR Control Register Bitfield */ #define FME_PR_CTRL_PR_RST BIT_ULL(0) /* Reset PR engine */ #define FME_PR_CTRL_PR_RSTACK BIT_ULL(4) /* Ack for PR engine reset */ #define FME_PR_CTRL_PR_RGN_ID GENMASK_ULL(9, 7) /* PR Region ID */ #define FME_PR_CTRL_PR_START BIT_ULL(12) /* Start to request PR service */ #define FME_PR_CTRL_PR_COMPLETE BIT_ULL(13) /* PR data push completion */ /* FME PR Status Register Bitfield */ /* Number of available entries in HW queue inside the PR engine. */ #define FME_PR_STS_PR_CREDIT GENMASK_ULL(8, 0) #define FME_PR_STS_PR_STS BIT_ULL(16) /* PR operation status */ #define FME_PR_STS_PR_STS_IDLE 0 #define FME_PR_STS_PR_CTRLR_STS GENMASK_ULL(22, 20) /* Controller status */ #define FME_PR_STS_PR_HOST_STS GENMASK_ULL(27, 24) /* PR host status */ /* FME PR Data Register Bitfield */ /* PR data from the raw-binary file. */ #define FME_PR_DATA_PR_DATA_RAW GENMASK_ULL(32, 0) /* FME PR Error Register */ /* PR Operation errors detected. */ #define FME_PR_ERR_OPERATION_ERR BIT_ULL(0) /* CRC error detected. */ #define FME_PR_ERR_CRC_ERR BIT_ULL(1) /* Incompatible PR bitstream detected. */ #define FME_PR_ERR_INCOMPATIBLE_BS BIT_ULL(2) /* PR data push protocol violated. */ #define FME_PR_ERR_PROTOCOL_ERR BIT_ULL(3) /* PR data fifo overflow error detected */ #define FME_PR_ERR_FIFO_OVERFLOW BIT_ULL(4) #define PR_WAIT_TIMEOUT 8000000 #define PR_HOST_STATUS_IDLE 0 struct fme_mgr_priv { void __iomem *ioaddr; u64 pr_error; }; static u64 pr_error_to_mgr_status(u64 err) { u64 status = 0; if (err & FME_PR_ERR_OPERATION_ERR) status |= FPGA_MGR_STATUS_OPERATION_ERR; if (err & FME_PR_ERR_CRC_ERR) status |= FPGA_MGR_STATUS_CRC_ERR; if (err & FME_PR_ERR_INCOMPATIBLE_BS) status |= FPGA_MGR_STATUS_INCOMPATIBLE_IMAGE_ERR; if (err & FME_PR_ERR_PROTOCOL_ERR) status |= FPGA_MGR_STATUS_IP_PROTOCOL_ERR; if (err & FME_PR_ERR_FIFO_OVERFLOW) status |= FPGA_MGR_STATUS_FIFO_OVERFLOW_ERR; return status; } static u64 fme_mgr_pr_error_handle(void __iomem *fme_pr) { u64 pr_status, pr_error; pr_status = readq(fme_pr + FME_PR_STS); if (!(pr_status & FME_PR_STS_PR_STS)) return 0; pr_error = readq(fme_pr + FME_PR_ERR); writeq(pr_error, fme_pr + FME_PR_ERR); return pr_error; } static int fme_mgr_write_init(struct fpga_manager *mgr, struct fpga_image_info *info, const char *buf, size_t count) { struct device *dev = &mgr->dev; struct fme_mgr_priv *priv = mgr->priv; void __iomem *fme_pr = priv->ioaddr; u64 pr_ctrl, pr_status; if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) { dev_err(dev, "only supports partial reconfiguration.\n"); return -EINVAL; } dev_dbg(dev, "resetting PR before initiated PR\n"); pr_ctrl = readq(fme_pr + FME_PR_CTRL); pr_ctrl |= FME_PR_CTRL_PR_RST; writeq(pr_ctrl, fme_pr + FME_PR_CTRL); if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl, pr_ctrl & FME_PR_CTRL_PR_RSTACK, 1, PR_WAIT_TIMEOUT)) { dev_err(dev, "PR Reset ACK timeout\n"); return -ETIMEDOUT; } pr_ctrl = readq(fme_pr + FME_PR_CTRL); pr_ctrl &= ~FME_PR_CTRL_PR_RST; writeq(pr_ctrl, fme_pr + FME_PR_CTRL); dev_dbg(dev, "waiting for PR resource in HW to be initialized and ready\n"); if (readq_poll_timeout(fme_pr + FME_PR_STS, pr_status, (pr_status & FME_PR_STS_PR_STS) == FME_PR_STS_PR_STS_IDLE, 1, PR_WAIT_TIMEOUT)) { dev_err(dev, "PR Status timeout\n"); priv->pr_error = fme_mgr_pr_error_handle(fme_pr); return -ETIMEDOUT; } dev_dbg(dev, "check and clear previous PR error\n"); priv->pr_error = fme_mgr_pr_error_handle(fme_pr); if (priv->pr_error) dev_dbg(dev, "previous PR error detected %llx\n", (unsigned long long)priv->pr_error); dev_dbg(dev, "set PR port ID\n"); pr_ctrl = readq(fme_pr + FME_PR_CTRL); pr_ctrl &= ~FME_PR_CTRL_PR_RGN_ID; pr_ctrl |= FIELD_PREP(FME_PR_CTRL_PR_RGN_ID, info->region_id); writeq(pr_ctrl, fme_pr + FME_PR_CTRL); return 0; } static int fme_mgr_write(struct fpga_manager *mgr, const char *buf, size_t count) { struct device *dev = &mgr->dev; struct fme_mgr_priv *priv = mgr->priv; void __iomem *fme_pr = priv->ioaddr; u64 pr_ctrl, pr_status, pr_data; int delay = 0, pr_credit, i = 0; dev_dbg(dev, "start request\n"); pr_ctrl = readq(fme_pr + FME_PR_CTRL); pr_ctrl |= FME_PR_CTRL_PR_START; writeq(pr_ctrl, fme_pr + FME_PR_CTRL); dev_dbg(dev, "pushing data from bitstream to HW\n"); /* * driver can push data to PR hardware using PR_DATA register once HW * has enough pr_credit (> 1), pr_credit reduces one for every 32bit * pr data write to PR_DATA register. If pr_credit <= 1, driver needs * to wait for enough pr_credit from hardware by polling. */ pr_status = readq(fme_pr + FME_PR_STS); pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status); while (count > 0) { while (pr_credit <= 1) { if (delay++ > PR_WAIT_TIMEOUT) { dev_err(dev, "PR_CREDIT timeout\n"); return -ETIMEDOUT; } udelay(1); pr_status = readq(fme_pr + FME_PR_STS); pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status); } if (count < 4) { dev_err(dev, "Invalid PR bitstream size\n"); return -EINVAL; } pr_data = 0; pr_data |= FIELD_PREP(FME_PR_DATA_PR_DATA_RAW, *(((u32 *)buf) + i)); writeq(pr_data, fme_pr + FME_PR_DATA); count -= 4; pr_credit--; i++; } return 0; } static int fme_mgr_write_complete(struct fpga_manager *mgr, struct fpga_image_info *info) { struct device *dev = &mgr->dev; struct fme_mgr_priv *priv = mgr->priv; void __iomem *fme_pr = priv->ioaddr; u64 pr_ctrl; pr_ctrl = readq(fme_pr + FME_PR_CTRL); pr_ctrl |= FME_PR_CTRL_PR_COMPLETE; writeq(pr_ctrl, fme_pr + FME_PR_CTRL); dev_dbg(dev, "green bitstream push complete\n"); dev_dbg(dev, "waiting for HW to release PR resource\n"); if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl, !(pr_ctrl & FME_PR_CTRL_PR_START), 1, PR_WAIT_TIMEOUT)) { dev_err(dev, "PR Completion ACK timeout.\n"); return -ETIMEDOUT; } dev_dbg(dev, "PR operation complete, checking status\n"); priv->pr_error = fme_mgr_pr_error_handle(fme_pr); if (priv->pr_error) { dev_dbg(dev, "PR error detected %llx\n", (unsigned long long)priv->pr_error); return -EIO; } dev_dbg(dev, "PR done successfully\n"); return 0; } static u64 fme_mgr_status(struct fpga_manager *mgr) { struct fme_mgr_priv *priv = mgr->priv; return pr_error_to_mgr_status(priv->pr_error); } static const struct fpga_manager_ops fme_mgr_ops = { .write_init = fme_mgr_write_init, .write = fme_mgr_write, .write_complete = fme_mgr_write_complete, .status = fme_mgr_status, }; static void fme_mgr_get_compat_id(void __iomem *fme_pr, struct fpga_compat_id *id) { id->id_l = readq(fme_pr + FME_PR_INTFC_ID_L); id->id_h = readq(fme_pr + FME_PR_INTFC_ID_H); } static int fme_mgr_probe(struct platform_device *pdev) { struct dfl_fme_mgr_pdata *pdata = dev_get_platdata(&pdev->dev); struct fpga_manager_info info = { 0 }; struct device *dev = &pdev->dev; struct fme_mgr_priv *priv; struct fpga_manager *mgr; struct resource *res; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; if (pdata->ioaddr) priv->ioaddr = pdata->ioaddr; if (!priv->ioaddr) { res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->ioaddr = devm_ioremap_resource(dev, res); if (IS_ERR(priv->ioaddr)) return PTR_ERR(priv->ioaddr); } info.name = "DFL FME FPGA Manager"; info.mops = &fme_mgr_ops; info.priv = priv; info.compat_id = devm_kzalloc(dev, sizeof(*info.compat_id), GFP_KERNEL); if (!info.compat_id) return -ENOMEM; fme_mgr_get_compat_id(priv->ioaddr, info.compat_id); mgr = devm_fpga_mgr_register_full(dev, &info); return PTR_ERR_OR_ZERO(mgr); } static struct platform_driver fme_mgr_driver = { .driver = { .name = DFL_FPGA_FME_MGR, }, .probe = fme_mgr_probe, }; module_platform_driver(fme_mgr_driver); MODULE_DESCRIPTION("FPGA Manager for DFL FPGA Management Engine"); MODULE_AUTHOR("Intel Corporation"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:dfl-fme-mgr");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1