Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Noralf Trönnes | 1107 | 90.22% | 20 | 55.56% |
Tom 'spot' Callaway | 54 | 4.40% | 1 | 2.78% |
Daniel Vetter | 22 | 1.79% | 4 | 11.11% |
David Lechner | 12 | 0.98% | 1 | 2.78% |
Andy Shevchenko | 10 | 0.81% | 1 | 2.78% |
Ville Syrjälä | 9 | 0.73% | 2 | 5.56% |
Meghana Madhyastha | 4 | 0.33% | 2 | 5.56% |
Thomas Zimmermann | 3 | 0.24% | 2 | 5.56% |
Sam Ravnborg | 3 | 0.24% | 1 | 2.78% |
Thomas Gleixner | 2 | 0.16% | 1 | 2.78% |
Uwe Kleine-König | 1 | 0.08% | 1 | 2.78% |
Total | 1227 | 36 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * DRM driver for Multi-Inno MI0283QT panels * * Copyright 2016 Noralf Trønnes */ #include <linux/backlight.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/spi/spi.h> #include <drm/drm_atomic_helper.h> #include <drm/drm_drv.h> #include <drm/drm_fb_helper.h> #include <drm/drm_gem_atomic_helper.h> #include <drm/drm_gem_cma_helper.h> #include <drm/drm_managed.h> #include <drm/drm_mipi_dbi.h> #include <drm/drm_modeset_helper.h> #include <video/mipi_display.h> #define ILI9341_FRMCTR1 0xb1 #define ILI9341_DISCTRL 0xb6 #define ILI9341_ETMOD 0xb7 #define ILI9341_PWCTRL1 0xc0 #define ILI9341_PWCTRL2 0xc1 #define ILI9341_VMCTRL1 0xc5 #define ILI9341_VMCTRL2 0xc7 #define ILI9341_PWCTRLA 0xcb #define ILI9341_PWCTRLB 0xcf #define ILI9341_PGAMCTRL 0xe0 #define ILI9341_NGAMCTRL 0xe1 #define ILI9341_DTCTRLA 0xe8 #define ILI9341_DTCTRLB 0xea #define ILI9341_PWRSEQ 0xed #define ILI9341_EN3GAM 0xf2 #define ILI9341_PUMPCTRL 0xf7 #define ILI9341_MADCTL_BGR BIT(3) #define ILI9341_MADCTL_MV BIT(5) #define ILI9341_MADCTL_MX BIT(6) #define ILI9341_MADCTL_MY BIT(7) static void mi0283qt_enable(struct drm_simple_display_pipe *pipe, struct drm_crtc_state *crtc_state, struct drm_plane_state *plane_state) { struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); struct mipi_dbi *dbi = &dbidev->dbi; u8 addr_mode; int ret, idx; if (!drm_dev_enter(pipe->crtc.dev, &idx)) return; DRM_DEBUG_KMS("\n"); ret = mipi_dbi_poweron_conditional_reset(dbidev); if (ret < 0) goto out_exit; if (ret == 1) goto out_enable; mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF); mipi_dbi_command(dbi, ILI9341_PWCTRLB, 0x00, 0x83, 0x30); mipi_dbi_command(dbi, ILI9341_PWRSEQ, 0x64, 0x03, 0x12, 0x81); mipi_dbi_command(dbi, ILI9341_DTCTRLA, 0x85, 0x01, 0x79); mipi_dbi_command(dbi, ILI9341_PWCTRLA, 0x39, 0x2c, 0x00, 0x34, 0x02); mipi_dbi_command(dbi, ILI9341_PUMPCTRL, 0x20); mipi_dbi_command(dbi, ILI9341_DTCTRLB, 0x00, 0x00); /* Power Control */ mipi_dbi_command(dbi, ILI9341_PWCTRL1, 0x26); mipi_dbi_command(dbi, ILI9341_PWCTRL2, 0x11); /* VCOM */ mipi_dbi_command(dbi, ILI9341_VMCTRL1, 0x35, 0x3e); mipi_dbi_command(dbi, ILI9341_VMCTRL2, 0xbe); /* Memory Access Control */ mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); /* Frame Rate */ mipi_dbi_command(dbi, ILI9341_FRMCTR1, 0x00, 0x1b); /* Gamma */ mipi_dbi_command(dbi, ILI9341_EN3GAM, 0x08); mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, 0x01); mipi_dbi_command(dbi, ILI9341_PGAMCTRL, 0x1f, 0x1a, 0x18, 0x0a, 0x0f, 0x06, 0x45, 0x87, 0x32, 0x0a, 0x07, 0x02, 0x07, 0x05, 0x00); mipi_dbi_command(dbi, ILI9341_NGAMCTRL, 0x00, 0x25, 0x27, 0x05, 0x10, 0x09, 0x3a, 0x78, 0x4d, 0x05, 0x18, 0x0d, 0x38, 0x3a, 0x1f); /* DDRAM */ mipi_dbi_command(dbi, ILI9341_ETMOD, 0x07); /* Display */ mipi_dbi_command(dbi, ILI9341_DISCTRL, 0x0a, 0x82, 0x27, 0x00); mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); msleep(100); mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); msleep(100); out_enable: /* The PiTFT (ili9340) has a hardware reset circuit that * resets only on power-on and not on each reboot through * a gpio like the rpi-display does. * As a result, we need to always apply the rotation value * regardless of the display "on/off" state. */ switch (dbidev->rotation) { default: addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | ILI9341_MADCTL_MX; break; case 90: addr_mode = ILI9341_MADCTL_MY; break; case 180: addr_mode = ILI9341_MADCTL_MV; break; case 270: addr_mode = ILI9341_MADCTL_MX; break; } addr_mode |= ILI9341_MADCTL_BGR; mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); mipi_dbi_enable_flush(dbidev, crtc_state, plane_state); out_exit: drm_dev_exit(idx); } static const struct drm_simple_display_pipe_funcs mi0283qt_pipe_funcs = { .enable = mi0283qt_enable, .disable = mipi_dbi_pipe_disable, .update = mipi_dbi_pipe_update, }; static const struct drm_display_mode mi0283qt_mode = { DRM_SIMPLE_MODE(320, 240, 58, 43), }; DEFINE_DRM_GEM_CMA_FOPS(mi0283qt_fops); static const struct drm_driver mi0283qt_driver = { .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, .fops = &mi0283qt_fops, DRM_GEM_CMA_DRIVER_OPS_VMAP, .debugfs_init = mipi_dbi_debugfs_init, .name = "mi0283qt", .desc = "Multi-Inno MI0283QT", .date = "20160614", .major = 1, .minor = 0, }; static const struct of_device_id mi0283qt_of_match[] = { { .compatible = "multi-inno,mi0283qt" }, {}, }; MODULE_DEVICE_TABLE(of, mi0283qt_of_match); static const struct spi_device_id mi0283qt_id[] = { { "mi0283qt", 0 }, { }, }; MODULE_DEVICE_TABLE(spi, mi0283qt_id); static int mi0283qt_probe(struct spi_device *spi) { struct device *dev = &spi->dev; struct mipi_dbi_dev *dbidev; struct drm_device *drm; struct mipi_dbi *dbi; struct gpio_desc *dc; u32 rotation = 0; int ret; dbidev = devm_drm_dev_alloc(dev, &mi0283qt_driver, struct mipi_dbi_dev, drm); if (IS_ERR(dbidev)) return PTR_ERR(dbidev); dbi = &dbidev->dbi; drm = &dbidev->drm; dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(dbi->reset)) return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n"); dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW); if (IS_ERR(dc)) return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n"); dbidev->regulator = devm_regulator_get(dev, "power"); if (IS_ERR(dbidev->regulator)) return PTR_ERR(dbidev->regulator); dbidev->backlight = devm_of_find_backlight(dev); if (IS_ERR(dbidev->backlight)) return PTR_ERR(dbidev->backlight); device_property_read_u32(dev, "rotation", &rotation); ret = mipi_dbi_spi_init(spi, dbi, dc); if (ret) return ret; ret = mipi_dbi_dev_init(dbidev, &mi0283qt_pipe_funcs, &mi0283qt_mode, rotation); if (ret) return ret; drm_mode_config_reset(drm); ret = drm_dev_register(drm, 0); if (ret) return ret; spi_set_drvdata(spi, drm); drm_fbdev_generic_setup(drm, 0); return 0; } static void mi0283qt_remove(struct spi_device *spi) { struct drm_device *drm = spi_get_drvdata(spi); drm_dev_unplug(drm); drm_atomic_helper_shutdown(drm); } static void mi0283qt_shutdown(struct spi_device *spi) { drm_atomic_helper_shutdown(spi_get_drvdata(spi)); } static int __maybe_unused mi0283qt_pm_suspend(struct device *dev) { return drm_mode_config_helper_suspend(dev_get_drvdata(dev)); } static int __maybe_unused mi0283qt_pm_resume(struct device *dev) { drm_mode_config_helper_resume(dev_get_drvdata(dev)); return 0; } static const struct dev_pm_ops mi0283qt_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(mi0283qt_pm_suspend, mi0283qt_pm_resume) }; static struct spi_driver mi0283qt_spi_driver = { .driver = { .name = "mi0283qt", .owner = THIS_MODULE, .of_match_table = mi0283qt_of_match, .pm = &mi0283qt_pm_ops, }, .id_table = mi0283qt_id, .probe = mi0283qt_probe, .remove = mi0283qt_remove, .shutdown = mi0283qt_shutdown, }; module_spi_driver(mi0283qt_spi_driver); MODULE_DESCRIPTION("Multi-Inno MI0283QT DRM driver"); MODULE_AUTHOR("Noralf Trønnes"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1