Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Andy Shevchenko | 509 | 26.26% | 18 | 40.91% |
Dirk Brandewie | 482 | 24.87% | 2 | 4.55% |
Sanket Goswami | 191 | 9.86% | 1 | 2.27% |
Mika Westerberg | 190 | 9.80% | 4 | 9.09% |
Hans de Goede | 146 | 7.53% | 4 | 9.09% |
Jarkko Nikula | 125 | 6.45% | 3 | 6.82% |
Chew, Chiau Ee | 117 | 6.04% | 1 | 2.27% |
Alan Cox | 70 | 3.61% | 1 | 2.27% |
Felipe Balbi | 51 | 2.63% | 1 | 2.27% |
Dustin Byford | 18 | 0.93% | 1 | 2.27% |
Luis Oliveira | 15 | 0.77% | 1 | 2.27% |
Octavian Purdila | 6 | 0.31% | 1 | 2.27% |
Jingoo Han | 6 | 0.31% | 1 | 2.27% |
Lakshmi Sowjanya D | 4 | 0.21% | 1 | 2.27% |
Chuhong Yuan | 4 | 0.21% | 1 | 2.27% |
Gustavo A. R. Silva | 2 | 0.10% | 1 | 2.27% |
Axel Lin | 2 | 0.10% | 2 | 4.55% |
Total | 1938 | 44 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Synopsys DesignWare I2C adapter driver (master only). * * Based on the TI DAVINCI I2C adapter driver. * * Copyright (C) 2006 Texas Instruments. * Copyright (C) 2007 MontaVista Software Inc. * Copyright (C) 2009 Provigent Ltd. * Copyright (C) 2011, 2015, 2016 Intel Corporation. */ #include <linux/acpi.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/errno.h> #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/pm_runtime.h> #include <linux/sched.h> #include <linux/slab.h> #include "i2c-designware-core.h" #include "i2c-ccgx-ucsi.h" #define DRIVER_NAME "i2c-designware-pci" #define AMD_CLK_RATE_HZ 100000 enum dw_pci_ctl_id_t { medfield, merrifield, baytrail, cherrytrail, haswell, elkhartlake, navi_amd, }; /* * This is a legacy structure to describe the hardware counters * to configure signal timings on the bus. For Device Tree platforms * one should use the respective properties and for ACPI there is * a set of ACPI methods that provide these counters. No new * platform should use this structure. */ struct dw_scl_sda_cfg { u16 ss_hcnt; u16 fs_hcnt; u16 ss_lcnt; u16 fs_lcnt; u32 sda_hold; }; struct dw_pci_controller { u32 bus_num; u32 flags; struct dw_scl_sda_cfg *scl_sda_cfg; int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c); u32 (*get_clk_rate_khz)(struct dw_i2c_dev *dev); }; /* Merrifield HCNT/LCNT/SDA hold time */ static struct dw_scl_sda_cfg mrfld_config = { .ss_hcnt = 0x2f8, .fs_hcnt = 0x87, .ss_lcnt = 0x37b, .fs_lcnt = 0x10a, }; /* BayTrail HCNT/LCNT/SDA hold time */ static struct dw_scl_sda_cfg byt_config = { .ss_hcnt = 0x200, .fs_hcnt = 0x55, .ss_lcnt = 0x200, .fs_lcnt = 0x99, .sda_hold = 0x6, }; /* Haswell HCNT/LCNT/SDA hold time */ static struct dw_scl_sda_cfg hsw_config = { .ss_hcnt = 0x01b0, .fs_hcnt = 0x48, .ss_lcnt = 0x01fb, .fs_lcnt = 0xa0, .sda_hold = 0x9, }; /* NAVI-AMD HCNT/LCNT/SDA hold time */ static struct dw_scl_sda_cfg navi_amd_config = { .ss_hcnt = 0x1ae, .ss_lcnt = 0x23a, .sda_hold = 0x9, }; static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev) { return 25000; } static u32 navi_amd_get_clk_rate_khz(struct dw_i2c_dev *dev) { return AMD_CLK_RATE_HZ; } static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) { struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); switch (pdev->device) { case 0x0817: dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ; fallthrough; case 0x0818: case 0x0819: c->bus_num = pdev->device - 0x817 + 3; return 0; case 0x082C: case 0x082D: case 0x082E: c->bus_num = pdev->device - 0x82C + 0; return 0; } return -ENODEV; } static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c) { struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); dev->flags |= MODEL_AMD_NAVI_GPU; dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ; return 0; } static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) { /* * On Intel Merrifield the user visible i2c buses are enumerated * [1..7]. So, we add 1 to shift the default range. Besides that the * first PCI slot provides 4 functions, that's why we have to add 0 to * the first slot and 4 to the next one. */ switch (PCI_SLOT(pdev->devfn)) { case 8: c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1; return 0; case 9: c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1; return 0; } return -ENODEV; } static u32 ehl_get_clk_rate_khz(struct dw_i2c_dev *dev) { return 100000; } static struct dw_pci_controller dw_pci_controllers[] = { [medfield] = { .bus_num = -1, .setup = mfld_setup, .get_clk_rate_khz = mfld_get_clk_rate_khz, }, [merrifield] = { .bus_num = -1, .scl_sda_cfg = &mrfld_config, .setup = mrfld_setup, }, [baytrail] = { .bus_num = -1, .scl_sda_cfg = &byt_config, }, [haswell] = { .bus_num = -1, .scl_sda_cfg = &hsw_config, }, [cherrytrail] = { .bus_num = -1, .scl_sda_cfg = &byt_config, }, [elkhartlake] = { .bus_num = -1, .get_clk_rate_khz = ehl_get_clk_rate_khz, }, [navi_amd] = { .bus_num = -1, .scl_sda_cfg = &navi_amd_config, .setup = navi_amd_setup, .get_clk_rate_khz = navi_amd_get_clk_rate_khz, }, }; static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); i_dev->disable(i_dev); return 0; } static int __maybe_unused i2c_dw_pci_suspend(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); i2c_mark_adapter_suspended(&i_dev->adapter); return i2c_dw_pci_runtime_suspend(dev); } static int __maybe_unused i2c_dw_pci_runtime_resume(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); return i_dev->init(i_dev); } static int __maybe_unused i2c_dw_pci_resume(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); int ret; ret = i2c_dw_pci_runtime_resume(dev); i2c_mark_adapter_resumed(&i_dev->adapter); return ret; } static const struct dev_pm_ops i2c_dw_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume) SET_RUNTIME_PM_OPS(i2c_dw_pci_runtime_suspend, i2c_dw_pci_runtime_resume, NULL) }; static int i2c_dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct dw_i2c_dev *dev; struct i2c_adapter *adap; int r; struct dw_pci_controller *controller; struct dw_scl_sda_cfg *cfg; if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) return dev_err_probe(&pdev->dev, -EINVAL, "Invalid driver data %ld\n", id->driver_data); controller = &dw_pci_controllers[id->driver_data]; r = pcim_enable_device(pdev); if (r) return dev_err_probe(&pdev->dev, r, "Failed to enable I2C PCI device\n"); pci_set_master(pdev); r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev)); if (r) return dev_err_probe(&pdev->dev, r, "I/O memory remapping failed\n"); dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL); if (!dev) return -ENOMEM; r = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); if (r < 0) return r; dev->get_clk_rate_khz = controller->get_clk_rate_khz; dev->timings.bus_freq_hz = I2C_MAX_FAST_MODE_FREQ; dev->base = pcim_iomap_table(pdev)[0]; dev->dev = &pdev->dev; dev->irq = pci_irq_vector(pdev, 0); dev->flags |= controller->flags; pci_set_drvdata(pdev, dev); if (controller->setup) { r = controller->setup(pdev, controller); if (r) { pci_free_irq_vectors(pdev); return r; } } i2c_dw_adjust_bus_speed(dev); if (has_acpi_companion(&pdev->dev)) i2c_dw_acpi_configure(&pdev->dev); r = i2c_dw_validate_speed(dev); if (r) { pci_free_irq_vectors(pdev); return r; } i2c_dw_configure(dev); if (controller->scl_sda_cfg) { cfg = controller->scl_sda_cfg; dev->ss_hcnt = cfg->ss_hcnt; dev->fs_hcnt = cfg->fs_hcnt; dev->ss_lcnt = cfg->ss_lcnt; dev->fs_lcnt = cfg->fs_lcnt; dev->sda_hold_time = cfg->sda_hold; } adap = &dev->adapter; adap->owner = THIS_MODULE; adap->class = 0; ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev)); adap->nr = controller->bus_num; r = i2c_dw_probe(dev); if (r) { pci_free_irq_vectors(pdev); return r; } if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) { dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, NULL); if (IS_ERR(dev->slave)) return dev_err_probe(dev->dev, PTR_ERR(dev->slave), "register UCSI failed\n"); } pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev); pm_runtime_allow(&pdev->dev); return 0; } static void i2c_dw_pci_remove(struct pci_dev *pdev) { struct dw_i2c_dev *dev = pci_get_drvdata(pdev); dev->disable(dev); pm_runtime_forbid(&pdev->dev); pm_runtime_get_noresume(&pdev->dev); i2c_del_adapter(&dev->adapter); devm_free_irq(&pdev->dev, dev->irq, dev); pci_free_irq_vectors(pdev); } static const struct pci_device_id i2_designware_pci_ids[] = { /* Medfield */ { PCI_VDEVICE(INTEL, 0x0817), medfield }, { PCI_VDEVICE(INTEL, 0x0818), medfield }, { PCI_VDEVICE(INTEL, 0x0819), medfield }, { PCI_VDEVICE(INTEL, 0x082C), medfield }, { PCI_VDEVICE(INTEL, 0x082D), medfield }, { PCI_VDEVICE(INTEL, 0x082E), medfield }, /* Merrifield */ { PCI_VDEVICE(INTEL, 0x1195), merrifield }, { PCI_VDEVICE(INTEL, 0x1196), merrifield }, /* Baytrail */ { PCI_VDEVICE(INTEL, 0x0F41), baytrail }, { PCI_VDEVICE(INTEL, 0x0F42), baytrail }, { PCI_VDEVICE(INTEL, 0x0F43), baytrail }, { PCI_VDEVICE(INTEL, 0x0F44), baytrail }, { PCI_VDEVICE(INTEL, 0x0F45), baytrail }, { PCI_VDEVICE(INTEL, 0x0F46), baytrail }, { PCI_VDEVICE(INTEL, 0x0F47), baytrail }, /* Haswell */ { PCI_VDEVICE(INTEL, 0x9c61), haswell }, { PCI_VDEVICE(INTEL, 0x9c62), haswell }, /* Braswell / Cherrytrail */ { PCI_VDEVICE(INTEL, 0x22C1), cherrytrail }, { PCI_VDEVICE(INTEL, 0x22C2), cherrytrail }, { PCI_VDEVICE(INTEL, 0x22C3), cherrytrail }, { PCI_VDEVICE(INTEL, 0x22C4), cherrytrail }, { PCI_VDEVICE(INTEL, 0x22C5), cherrytrail }, { PCI_VDEVICE(INTEL, 0x22C6), cherrytrail }, { PCI_VDEVICE(INTEL, 0x22C7), cherrytrail }, /* Elkhart Lake (PSE I2C) */ { PCI_VDEVICE(INTEL, 0x4bb9), elkhartlake }, { PCI_VDEVICE(INTEL, 0x4bba), elkhartlake }, { PCI_VDEVICE(INTEL, 0x4bbb), elkhartlake }, { PCI_VDEVICE(INTEL, 0x4bbc), elkhartlake }, { PCI_VDEVICE(INTEL, 0x4bbd), elkhartlake }, { PCI_VDEVICE(INTEL, 0x4bbe), elkhartlake }, { PCI_VDEVICE(INTEL, 0x4bbf), elkhartlake }, { PCI_VDEVICE(INTEL, 0x4bc0), elkhartlake }, { PCI_VDEVICE(ATI, 0x7314), navi_amd }, { PCI_VDEVICE(ATI, 0x73a4), navi_amd }, { PCI_VDEVICE(ATI, 0x73e4), navi_amd }, { PCI_VDEVICE(ATI, 0x73c4), navi_amd }, { 0,} }; MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); static struct pci_driver dw_i2c_driver = { .name = DRIVER_NAME, .id_table = i2_designware_pci_ids, .probe = i2c_dw_pci_probe, .remove = i2c_dw_pci_remove, .driver = { .pm = &i2c_dw_pm_ops, }, }; module_pci_driver(dw_i2c_driver); /* Work with hotplug and coldplug */ MODULE_ALIAS("i2c_designware-pci"); MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1