Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Vincent Knecht | 1475 | 100.00% | 1 | 100.00% |
Total | 1475 | 1 |
// SPDX-License-Identifier: GPL-2.0-only /* * Driver for MStar msg2638 touchscreens * * Copyright (c) 2021 Vincent Knecht <vincent.knecht@mailoo.org> * * Checksum and IRQ handler based on mstar_drv_common.c and * mstar_drv_mutual_fw_control.c * Copyright (c) 2006-2012 MStar Semiconductor, Inc. * * Driver structure based on zinitix.c by Michael Srba <Michael.Srba@seznam.cz> */ #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/input/mt.h> #include <linux/input/touchscreen.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> #define MODE_DATA_RAW 0x5A #define MAX_SUPPORTED_FINGER_NUM 5 #define CHIP_ON_DELAY_MS 15 #define FIRMWARE_ON_DELAY_MS 50 #define RESET_DELAY_MIN_US 10000 #define RESET_DELAY_MAX_US 11000 struct packet { u8 xy_hi; /* higher bits of x and y coordinates */ u8 x_low; u8 y_low; u8 pressure; }; struct touch_event { u8 mode; struct packet pkt[MAX_SUPPORTED_FINGER_NUM]; u8 proximity; u8 checksum; }; struct msg2638_ts_data { struct i2c_client *client; struct input_dev *input_dev; struct touchscreen_properties prop; struct regulator_bulk_data supplies[2]; struct gpio_desc *reset_gpiod; }; static u8 msg2638_checksum(u8 *data, u32 length) { s32 sum = 0; u32 i; for (i = 0; i < length; i++) sum += data[i]; return (u8)((-sum) & 0xFF); } static irqreturn_t msg2638_ts_irq_handler(int irq, void *msg2638_handler) { struct msg2638_ts_data *msg2638 = msg2638_handler; struct i2c_client *client = msg2638->client; struct input_dev *input = msg2638->input_dev; struct touch_event touch_event; u32 len = sizeof(touch_event); struct i2c_msg msg[] = { { .addr = client->addr, .flags = I2C_M_RD, .len = sizeof(touch_event), .buf = (u8 *)&touch_event, }, }; struct packet *p; u16 x, y; int ret; int i; ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); if (ret != ARRAY_SIZE(msg)) { dev_err(&client->dev, "Failed I2C transfer in irq handler: %d\n", ret < 0 ? ret : -EIO); goto out; } if (touch_event.mode != MODE_DATA_RAW) goto out; if (msg2638_checksum((u8 *)&touch_event, len - 1) != touch_event.checksum) { dev_err(&client->dev, "Failed checksum!\n"); goto out; } for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) { p = &touch_event.pkt[i]; /* Ignore non-pressed finger data */ if (p->xy_hi == 0xFF && p->x_low == 0xFF && p->y_low == 0xFF) continue; x = (((p->xy_hi & 0xF0) << 4) | p->x_low); y = (((p->xy_hi & 0x0F) << 8) | p->y_low); input_mt_slot(input, i); input_mt_report_slot_state(input, MT_TOOL_FINGER, true); touchscreen_report_pos(input, &msg2638->prop, x, y, true); } input_mt_sync_frame(msg2638->input_dev); input_sync(msg2638->input_dev); out: return IRQ_HANDLED; } static void msg2638_reset(struct msg2638_ts_data *msg2638) { gpiod_set_value_cansleep(msg2638->reset_gpiod, 1); usleep_range(RESET_DELAY_MIN_US, RESET_DELAY_MAX_US); gpiod_set_value_cansleep(msg2638->reset_gpiod, 0); msleep(FIRMWARE_ON_DELAY_MS); } static int msg2638_start(struct msg2638_ts_data *msg2638) { int error; error = regulator_bulk_enable(ARRAY_SIZE(msg2638->supplies), msg2638->supplies); if (error) { dev_err(&msg2638->client->dev, "Failed to enable regulators: %d\n", error); return error; } msleep(CHIP_ON_DELAY_MS); msg2638_reset(msg2638); enable_irq(msg2638->client->irq); return 0; } static int msg2638_stop(struct msg2638_ts_data *msg2638) { int error; disable_irq(msg2638->client->irq); error = regulator_bulk_disable(ARRAY_SIZE(msg2638->supplies), msg2638->supplies); if (error) { dev_err(&msg2638->client->dev, "Failed to disable regulators: %d\n", error); return error; } return 0; } static int msg2638_input_open(struct input_dev *dev) { struct msg2638_ts_data *msg2638 = input_get_drvdata(dev); return msg2638_start(msg2638); } static void msg2638_input_close(struct input_dev *dev) { struct msg2638_ts_data *msg2638 = input_get_drvdata(dev); msg2638_stop(msg2638); } static int msg2638_init_input_dev(struct msg2638_ts_data *msg2638) { struct device *dev = &msg2638->client->dev; struct input_dev *input_dev; int error; input_dev = devm_input_allocate_device(dev); if (!input_dev) { dev_err(dev, "Failed to allocate input device.\n"); return -ENOMEM; } input_set_drvdata(input_dev, msg2638); msg2638->input_dev = input_dev; input_dev->name = "MStar TouchScreen"; input_dev->phys = "input/ts"; input_dev->id.bustype = BUS_I2C; input_dev->open = msg2638_input_open; input_dev->close = msg2638_input_close; input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); touchscreen_parse_properties(input_dev, true, &msg2638->prop); if (!msg2638->prop.max_x || !msg2638->prop.max_y) { dev_err(dev, "touchscreen-size-x and/or touchscreen-size-y not set in properties\n"); return -EINVAL; } error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); if (error) { dev_err(dev, "Failed to initialize MT slots: %d\n", error); return error; } error = input_register_device(input_dev); if (error) { dev_err(dev, "Failed to register input device: %d\n", error); return error; } return 0; } static int msg2638_ts_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct msg2638_ts_data *msg2638; int error; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { dev_err(dev, "Failed to assert adapter's support for plain I2C.\n"); return -ENXIO; } msg2638 = devm_kzalloc(dev, sizeof(*msg2638), GFP_KERNEL); if (!msg2638) return -ENOMEM; msg2638->client = client; i2c_set_clientdata(client, msg2638); msg2638->supplies[0].supply = "vdd"; msg2638->supplies[1].supply = "vddio"; error = devm_regulator_bulk_get(dev, ARRAY_SIZE(msg2638->supplies), msg2638->supplies); if (error) { dev_err(dev, "Failed to get regulators: %d\n", error); return error; } msg2638->reset_gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(msg2638->reset_gpiod)) { error = PTR_ERR(msg2638->reset_gpiod); dev_err(dev, "Failed to request reset GPIO: %d\n", error); return error; } error = msg2638_init_input_dev(msg2638); if (error) { dev_err(dev, "Failed to initialize input device: %d\n", error); return error; } error = devm_request_threaded_irq(dev, client->irq, NULL, msg2638_ts_irq_handler, IRQF_ONESHOT | IRQF_NO_AUTOEN, client->name, msg2638); if (error) { dev_err(dev, "Failed to request IRQ: %d\n", error); return error; } return 0; } static int __maybe_unused msg2638_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct msg2638_ts_data *msg2638 = i2c_get_clientdata(client); mutex_lock(&msg2638->input_dev->mutex); if (input_device_enabled(msg2638->input_dev)) msg2638_stop(msg2638); mutex_unlock(&msg2638->input_dev->mutex); return 0; } static int __maybe_unused msg2638_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct msg2638_ts_data *msg2638 = i2c_get_clientdata(client); int ret = 0; mutex_lock(&msg2638->input_dev->mutex); if (input_device_enabled(msg2638->input_dev)) ret = msg2638_start(msg2638); mutex_unlock(&msg2638->input_dev->mutex); return ret; } static SIMPLE_DEV_PM_OPS(msg2638_pm_ops, msg2638_suspend, msg2638_resume); static const struct of_device_id msg2638_of_match[] = { { .compatible = "mstar,msg2638" }, { } }; MODULE_DEVICE_TABLE(of, msg2638_of_match); static struct i2c_driver msg2638_ts_driver = { .probe_new = msg2638_ts_probe, .driver = { .name = "MStar-TS", .pm = &msg2638_pm_ops, .of_match_table = msg2638_of_match, }, }; module_i2c_driver(msg2638_ts_driver); MODULE_AUTHOR("Vincent Knecht <vincent.knecht@mailoo.org>"); MODULE_DESCRIPTION("MStar MSG2638 touchscreen driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1