Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Peter Griffin | 5318 | 97.81% | 6 | 23.08% |
Mauro Carvalho Chehab | 15 | 0.28% | 5 | 19.23% |
Nishka Dasgupta | 15 | 0.28% | 1 | 3.85% |
Kees Cook | 14 | 0.26% | 1 | 3.85% |
Allen Pais | 14 | 0.26% | 1 | 3.85% |
Andy Shevchenko | 14 | 0.26% | 1 | 3.85% |
Wei Yongjun | 10 | 0.18% | 1 | 3.85% |
Dan Carpenter | 8 | 0.15% | 1 | 3.85% |
Sudip Mukherjee | 7 | 0.13% | 2 | 7.69% |
Gustavo A. R. Silva | 6 | 0.11% | 1 | 3.85% |
Hans Verkuil | 5 | 0.09% | 1 | 3.85% |
Geliang Tang | 3 | 0.06% | 1 | 3.85% |
Vasyl Gomonovych | 3 | 0.06% | 1 | 3.85% |
Fabio Estevam | 2 | 0.04% | 1 | 3.85% |
Benjamin Gaignard | 2 | 0.04% | 1 | 3.85% |
Xiaofeng Cao | 1 | 0.02% | 1 | 3.85% |
Total | 5437 | 26 |
// SPDX-License-Identifier: GPL-2.0 /* * c8sectpfe-core.c - C8SECTPFE STi DVB driver * * Copyright (c) STMicroelectronics 2015 * * Author:Peter Bennett <peter.bennett@st.com> * Peter Griffin <peter.griffin@linaro.org> * */ #include <linux/atomic.h> #include <linux/clk.h> #include <linux/completion.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/dvb/dmx.h> #include <linux/dvb/frontend.h> #include <linux/errno.h> #include <linux/firmware.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of_gpio.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/usb.h> #include <linux/slab.h> #include <linux/time.h> #include <linux/wait.h> #include <linux/pinctrl/pinctrl.h> #include "c8sectpfe-core.h" #include "c8sectpfe-common.h" #include "c8sectpfe-debugfs.h" #include <media/dmxdev.h> #include <media/dvb_demux.h> #include <media/dvb_frontend.h> #include <media/dvb_net.h> #define FIRMWARE_MEMDMA "pti_memdma_h407.elf" MODULE_FIRMWARE(FIRMWARE_MEMDMA); #define PID_TABLE_SIZE 1024 #define POLL_MSECS 50 static int load_c8sectpfe_fw(struct c8sectpfei *fei); #define TS_PKT_SIZE 188 #define HEADER_SIZE (4) #define PACKET_SIZE (TS_PKT_SIZE+HEADER_SIZE) #define FEI_ALIGNMENT (32) /* hw requires minimum of 8*PACKET_SIZE and padded to 8byte boundary */ #define FEI_BUFFER_SIZE (8*PACKET_SIZE*340) #define FIFO_LEN 1024 static void c8sectpfe_timer_interrupt(struct timer_list *t) { struct c8sectpfei *fei = from_timer(fei, t, timer); struct channel_info *channel; int chan_num; /* iterate through input block channels */ for (chan_num = 0; chan_num < fei->tsin_count; chan_num++) { channel = fei->channel_data[chan_num]; /* is this descriptor initialised and TP enabled */ if (channel->irec && readl(channel->irec + DMA_PRDS_TPENABLE)) tasklet_schedule(&channel->tsklet); } fei->timer.expires = jiffies + msecs_to_jiffies(POLL_MSECS); add_timer(&fei->timer); } static void channel_swdemux_tsklet(struct tasklet_struct *t) { struct channel_info *channel = from_tasklet(channel, t, tsklet); struct c8sectpfei *fei; unsigned long wp, rp; int pos, num_packets, n, size; u8 *buf; if (unlikely(!channel || !channel->irec)) return; fei = channel->fei; wp = readl(channel->irec + DMA_PRDS_BUSWP_TP(0)); rp = readl(channel->irec + DMA_PRDS_BUSRP_TP(0)); pos = rp - channel->back_buffer_busaddr; /* has it wrapped */ if (wp < rp) wp = channel->back_buffer_busaddr + FEI_BUFFER_SIZE; size = wp - rp; num_packets = size / PACKET_SIZE; /* manage cache so data is visible to CPU */ dma_sync_single_for_cpu(fei->dev, rp, size, DMA_FROM_DEVICE); buf = channel->back_buffer_aligned; dev_dbg(fei->dev, "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\trp=0x%lx, wp=0x%lx\n", channel->tsin_id, channel, num_packets, buf, pos, rp, wp); for (n = 0; n < num_packets; n++) { dvb_dmx_swfilter_packets( &fei->c8sectpfe[0]-> demux[channel->demux_mapping].dvb_demux, &buf[pos], 1); pos += PACKET_SIZE; } /* advance the read pointer */ if (wp == (channel->back_buffer_busaddr + FEI_BUFFER_SIZE)) writel(channel->back_buffer_busaddr, channel->irec + DMA_PRDS_BUSRP_TP(0)); else writel(wp, channel->irec + DMA_PRDS_BUSRP_TP(0)); } static int c8sectpfe_start_feed(struct dvb_demux_feed *dvbdmxfeed) { struct dvb_demux *demux = dvbdmxfeed->demux; struct stdemux *stdemux = (struct stdemux *)demux->priv; struct c8sectpfei *fei = stdemux->c8sectpfei; struct channel_info *channel; u32 tmp; unsigned long *bitmap; int ret; switch (dvbdmxfeed->type) { case DMX_TYPE_TS: break; case DMX_TYPE_SEC: break; default: dev_err(fei->dev, "%s:%d Error bailing\n" , __func__, __LINE__); return -EINVAL; } if (dvbdmxfeed->type == DMX_TYPE_TS) { switch (dvbdmxfeed->pes_type) { case DMX_PES_VIDEO: case DMX_PES_AUDIO: case DMX_PES_TELETEXT: case DMX_PES_PCR: case DMX_PES_OTHER: break; default: dev_err(fei->dev, "%s:%d Error bailing\n" , __func__, __LINE__); return -EINVAL; } } if (!atomic_read(&fei->fw_loaded)) { ret = load_c8sectpfe_fw(fei); if (ret) return ret; } mutex_lock(&fei->lock); channel = fei->channel_data[stdemux->tsin_index]; bitmap = channel->pid_buffer_aligned; /* 8192 is a special PID */ if (dvbdmxfeed->pid == 8192) { tmp = readl(fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id)); tmp &= ~C8SECTPFE_PID_ENABLE; writel(tmp, fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id)); } else { bitmap_set(bitmap, dvbdmxfeed->pid, 1); } /* manage cache so PID bitmap is visible to HW */ dma_sync_single_for_device(fei->dev, channel->pid_buffer_busaddr, PID_TABLE_SIZE, DMA_TO_DEVICE); channel->active = 1; if (fei->global_feed_count == 0) { fei->timer.expires = jiffies + msecs_to_jiffies(msecs_to_jiffies(POLL_MSECS)); add_timer(&fei->timer); } if (stdemux->running_feed_count == 0) { dev_dbg(fei->dev, "Starting channel=%p\n", channel); tasklet_setup(&channel->tsklet, channel_swdemux_tsklet); /* Reset the internal inputblock sram pointers */ writel(channel->fifo, fei->io + C8SECTPFE_IB_BUFF_STRT(channel->tsin_id)); writel(channel->fifo + FIFO_LEN - 1, fei->io + C8SECTPFE_IB_BUFF_END(channel->tsin_id)); writel(channel->fifo, fei->io + C8SECTPFE_IB_READ_PNT(channel->tsin_id)); writel(channel->fifo, fei->io + C8SECTPFE_IB_WRT_PNT(channel->tsin_id)); /* reset read / write memdma ptrs for this channel */ writel(channel->back_buffer_busaddr, channel->irec + DMA_PRDS_BUSBASE_TP(0)); tmp = channel->back_buffer_busaddr + FEI_BUFFER_SIZE - 1; writel(tmp, channel->irec + DMA_PRDS_BUSTOP_TP(0)); writel(channel->back_buffer_busaddr, channel->irec + DMA_PRDS_BUSWP_TP(0)); /* Issue a reset and enable InputBlock */ writel(C8SECTPFE_SYS_ENABLE | C8SECTPFE_SYS_RESET , fei->io + C8SECTPFE_IB_SYS(channel->tsin_id)); /* and enable the tp */ writel(0x1, channel->irec + DMA_PRDS_TPENABLE); dev_dbg(fei->dev, "%s:%d Starting DMA feed on stdemux=%p\n" , __func__, __LINE__, stdemux); } stdemux->running_feed_count++; fei->global_feed_count++; mutex_unlock(&fei->lock); return 0; } static int c8sectpfe_stop_feed(struct dvb_demux_feed *dvbdmxfeed) { struct dvb_demux *demux = dvbdmxfeed->demux; struct stdemux *stdemux = (struct stdemux *)demux->priv; struct c8sectpfei *fei = stdemux->c8sectpfei; struct channel_info *channel; int idlereq; u32 tmp; int ret; unsigned long *bitmap; if (!atomic_read(&fei->fw_loaded)) { ret = load_c8sectpfe_fw(fei); if (ret) return ret; } mutex_lock(&fei->lock); channel = fei->channel_data[stdemux->tsin_index]; bitmap = channel->pid_buffer_aligned; if (dvbdmxfeed->pid == 8192) { tmp = readl(fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id)); tmp |= C8SECTPFE_PID_ENABLE; writel(tmp, fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id)); } else { bitmap_clear(bitmap, dvbdmxfeed->pid, 1); } /* manage cache so data is visible to HW */ dma_sync_single_for_device(fei->dev, channel->pid_buffer_busaddr, PID_TABLE_SIZE, DMA_TO_DEVICE); if (--stdemux->running_feed_count == 0) { channel = fei->channel_data[stdemux->tsin_index]; /* TP re-configuration on page 168 of functional spec */ /* disable IB (prevents more TS data going to memdma) */ writel(0, fei->io + C8SECTPFE_IB_SYS(channel->tsin_id)); /* disable this channels descriptor */ writel(0, channel->irec + DMA_PRDS_TPENABLE); tasklet_disable(&channel->tsklet); /* now request memdma channel goes idle */ idlereq = (1 << channel->tsin_id) | IDLEREQ; writel(idlereq, fei->io + DMA_IDLE_REQ); /* wait for idle irq handler to signal completion */ ret = wait_for_completion_timeout(&channel->idle_completion, msecs_to_jiffies(100)); if (ret == 0) dev_warn(fei->dev, "Timeout waiting for idle irq on tsin%d\n", channel->tsin_id); reinit_completion(&channel->idle_completion); /* reset read / write ptrs for this channel */ writel(channel->back_buffer_busaddr, channel->irec + DMA_PRDS_BUSBASE_TP(0)); tmp = channel->back_buffer_busaddr + FEI_BUFFER_SIZE - 1; writel(tmp, channel->irec + DMA_PRDS_BUSTOP_TP(0)); writel(channel->back_buffer_busaddr, channel->irec + DMA_PRDS_BUSWP_TP(0)); dev_dbg(fei->dev, "%s:%d stopping DMA feed on stdemux=%p channel=%d\n", __func__, __LINE__, stdemux, channel->tsin_id); /* turn off all PIDS in the bitmap */ memset(channel->pid_buffer_aligned, 0, PID_TABLE_SIZE); /* manage cache so data is visible to HW */ dma_sync_single_for_device(fei->dev, channel->pid_buffer_busaddr, PID_TABLE_SIZE, DMA_TO_DEVICE); channel->active = 0; } if (--fei->global_feed_count == 0) { dev_dbg(fei->dev, "%s:%d global_feed_count=%d\n" , __func__, __LINE__, fei->global_feed_count); del_timer(&fei->timer); } mutex_unlock(&fei->lock); return 0; } static struct channel_info *find_channel(struct c8sectpfei *fei, int tsin_num) { int i; for (i = 0; i < C8SECTPFE_MAX_TSIN_CHAN; i++) { if (!fei->channel_data[i]) continue; if (fei->channel_data[i]->tsin_id == tsin_num) return fei->channel_data[i]; } return NULL; } static void c8sectpfe_getconfig(struct c8sectpfei *fei) { struct c8sectpfe_hw *hw = &fei->hw_stats; hw->num_ib = readl(fei->io + SYS_CFG_NUM_IB); hw->num_mib = readl(fei->io + SYS_CFG_NUM_MIB); hw->num_swts = readl(fei->io + SYS_CFG_NUM_SWTS); hw->num_tsout = readl(fei->io + SYS_CFG_NUM_TSOUT); hw->num_ccsc = readl(fei->io + SYS_CFG_NUM_CCSC); hw->num_ram = readl(fei->io + SYS_CFG_NUM_RAM); hw->num_tp = readl(fei->io + SYS_CFG_NUM_TP); dev_info(fei->dev, "C8SECTPFE hw supports the following:\n"); dev_info(fei->dev, "Input Blocks: %d\n", hw->num_ib); dev_info(fei->dev, "Merged Input Blocks: %d\n", hw->num_mib); dev_info(fei->dev, "Software Transport Stream Inputs: %d\n" , hw->num_swts); dev_info(fei->dev, "Transport Stream Output: %d\n", hw->num_tsout); dev_info(fei->dev, "Cable Card Converter: %d\n", hw->num_ccsc); dev_info(fei->dev, "RAMs supported by C8SECTPFE: %d\n", hw->num_ram); dev_info(fei->dev, "Tango TPs supported by C8SECTPFE: %d\n" , hw->num_tp); } static irqreturn_t c8sectpfe_idle_irq_handler(int irq, void *priv) { struct c8sectpfei *fei = priv; struct channel_info *chan; int bit; unsigned long tmp = readl(fei->io + DMA_IDLE_REQ); /* page 168 of functional spec: Clear the idle request by writing 0 to the C8SECTPFE_DMA_IDLE_REQ register. */ /* signal idle completion */ for_each_set_bit(bit, &tmp, fei->hw_stats.num_ib) { chan = find_channel(fei, bit); if (chan) complete(&chan->idle_completion); } writel(0, fei->io + DMA_IDLE_REQ); return IRQ_HANDLED; } static void free_input_block(struct c8sectpfei *fei, struct channel_info *tsin) { if (!fei || !tsin) return; if (tsin->back_buffer_busaddr) if (!dma_mapping_error(fei->dev, tsin->back_buffer_busaddr)) dma_unmap_single(fei->dev, tsin->back_buffer_busaddr, FEI_BUFFER_SIZE, DMA_BIDIRECTIONAL); kfree(tsin->back_buffer_start); if (tsin->pid_buffer_busaddr) if (!dma_mapping_error(fei->dev, tsin->pid_buffer_busaddr)) dma_unmap_single(fei->dev, tsin->pid_buffer_busaddr, PID_TABLE_SIZE, DMA_BIDIRECTIONAL); kfree(tsin->pid_buffer_start); } #define MAX_NAME 20 static int configure_memdma_and_inputblock(struct c8sectpfei *fei, struct channel_info *tsin) { int ret; u32 tmp; char tsin_pin_name[MAX_NAME]; if (!fei || !tsin) return -EINVAL; dev_dbg(fei->dev, "%s:%d Configuring channel=%p tsin=%d\n" , __func__, __LINE__, tsin, tsin->tsin_id); init_completion(&tsin->idle_completion); tsin->back_buffer_start = kzalloc(FEI_BUFFER_SIZE + FEI_ALIGNMENT, GFP_KERNEL); if (!tsin->back_buffer_start) { ret = -ENOMEM; goto err_unmap; } /* Ensure backbuffer is 32byte aligned */ tsin->back_buffer_aligned = tsin->back_buffer_start + FEI_ALIGNMENT; tsin->back_buffer_aligned = PTR_ALIGN(tsin->back_buffer_aligned, FEI_ALIGNMENT); tsin->back_buffer_busaddr = dma_map_single(fei->dev, tsin->back_buffer_aligned, FEI_BUFFER_SIZE, DMA_BIDIRECTIONAL); if (dma_mapping_error(fei->dev, tsin->back_buffer_busaddr)) { dev_err(fei->dev, "failed to map back_buffer\n"); ret = -EFAULT; goto err_unmap; } /* * The pid buffer can be configured (in hw) for byte or bit * per pid. By powers of deduction we conclude stih407 family * is configured (at SoC design stage) for bit per pid. */ tsin->pid_buffer_start = kzalloc(PID_TABLE_SIZE + PID_TABLE_SIZE, GFP_KERNEL); if (!tsin->pid_buffer_start) { ret = -ENOMEM; goto err_unmap; } /* * PID buffer needs to be aligned to size of the pid table * which at bit per pid is 1024 bytes (8192 pids / 8). * PIDF_BASE register enforces this alignment when writing * the register. */ tsin->pid_buffer_aligned = tsin->pid_buffer_start + PID_TABLE_SIZE; tsin->pid_buffer_aligned = PTR_ALIGN(tsin->pid_buffer_aligned, PID_TABLE_SIZE); tsin->pid_buffer_busaddr = dma_map_single(fei->dev, tsin->pid_buffer_aligned, PID_TABLE_SIZE, DMA_BIDIRECTIONAL); if (dma_mapping_error(fei->dev, tsin->pid_buffer_busaddr)) { dev_err(fei->dev, "failed to map pid_bitmap\n"); ret = -EFAULT; goto err_unmap; } /* manage cache so pid bitmap is visible to HW */ dma_sync_single_for_device(fei->dev, tsin->pid_buffer_busaddr, PID_TABLE_SIZE, DMA_TO_DEVICE); snprintf(tsin_pin_name, MAX_NAME, "tsin%d-%s", tsin->tsin_id, (tsin->serial_not_parallel ? "serial" : "parallel")); tsin->pstate = pinctrl_lookup_state(fei->pinctrl, tsin_pin_name); if (IS_ERR(tsin->pstate)) { dev_err(fei->dev, "%s: pinctrl_lookup_state couldn't find %s state\n" , __func__, tsin_pin_name); ret = PTR_ERR(tsin->pstate); goto err_unmap; } ret = pinctrl_select_state(fei->pinctrl, tsin->pstate); if (ret) { dev_err(fei->dev, "%s: pinctrl_select_state failed\n" , __func__); goto err_unmap; } /* Enable this input block */ tmp = readl(fei->io + SYS_INPUT_CLKEN); tmp |= BIT(tsin->tsin_id); writel(tmp, fei->io + SYS_INPUT_CLKEN); if (tsin->serial_not_parallel) tmp |= C8SECTPFE_SERIAL_NOT_PARALLEL; if (tsin->invert_ts_clk) tmp |= C8SECTPFE_INVERT_TSCLK; if (tsin->async_not_sync) tmp |= C8SECTPFE_ASYNC_NOT_SYNC; tmp |= C8SECTPFE_ALIGN_BYTE_SOP | C8SECTPFE_BYTE_ENDIANNESS_MSB; writel(tmp, fei->io + C8SECTPFE_IB_IP_FMT_CFG(tsin->tsin_id)); writel(C8SECTPFE_SYNC(0x9) | C8SECTPFE_DROP(0x9) | C8SECTPFE_TOKEN(0x47), fei->io + C8SECTPFE_IB_SYNCLCKDRP_CFG(tsin->tsin_id)); writel(TS_PKT_SIZE, fei->io + C8SECTPFE_IB_PKT_LEN(tsin->tsin_id)); /* Place the FIFO's at the end of the irec descriptors */ tsin->fifo = (tsin->tsin_id * FIFO_LEN); writel(tsin->fifo, fei->io + C8SECTPFE_IB_BUFF_STRT(tsin->tsin_id)); writel(tsin->fifo + FIFO_LEN - 1, fei->io + C8SECTPFE_IB_BUFF_END(tsin->tsin_id)); writel(tsin->fifo, fei->io + C8SECTPFE_IB_READ_PNT(tsin->tsin_id)); writel(tsin->fifo, fei->io + C8SECTPFE_IB_WRT_PNT(tsin->tsin_id)); writel(tsin->pid_buffer_busaddr, fei->io + PIDF_BASE(tsin->tsin_id)); dev_dbg(fei->dev, "chan=%d PIDF_BASE=0x%x pid_bus_addr=%pad\n", tsin->tsin_id, readl(fei->io + PIDF_BASE(tsin->tsin_id)), &tsin->pid_buffer_busaddr); /* Configure and enable HW PID filtering */ /* * The PID value is created by assembling the first 8 bytes of * the TS packet into a 64-bit word in big-endian format. A * slice of that 64-bit word is taken from * (PID_OFFSET+PID_NUM_BITS-1) to PID_OFFSET. */ tmp = (C8SECTPFE_PID_ENABLE | C8SECTPFE_PID_NUMBITS(13) | C8SECTPFE_PID_OFFSET(40)); writel(tmp, fei->io + C8SECTPFE_IB_PID_SET(tsin->tsin_id)); dev_dbg(fei->dev, "chan=%d setting wp: %d, rp: %d, buf: %d-%d\n", tsin->tsin_id, readl(fei->io + C8SECTPFE_IB_WRT_PNT(tsin->tsin_id)), readl(fei->io + C8SECTPFE_IB_READ_PNT(tsin->tsin_id)), readl(fei->io + C8SECTPFE_IB_BUFF_STRT(tsin->tsin_id)), readl(fei->io + C8SECTPFE_IB_BUFF_END(tsin->tsin_id))); /* Get base addpress of pointer record block from DMEM */ tsin->irec = fei->io + DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + readl(fei->io + DMA_PTRREC_BASE); /* fill out pointer record data structure */ /* advance pointer record block to our channel */ tsin->irec += (tsin->tsin_id * DMA_PRDS_SIZE); writel(tsin->fifo, tsin->irec + DMA_PRDS_MEMBASE); writel(tsin->fifo + FIFO_LEN - 1, tsin->irec + DMA_PRDS_MEMTOP); writel((188 + 7)&~7, tsin->irec + DMA_PRDS_PKTSIZE); writel(0x1, tsin->irec + DMA_PRDS_TPENABLE); /* read/write pointers with physical bus address */ writel(tsin->back_buffer_busaddr, tsin->irec + DMA_PRDS_BUSBASE_TP(0)); tmp = tsin->back_buffer_busaddr + FEI_BUFFER_SIZE - 1; writel(tmp, tsin->irec + DMA_PRDS_BUSTOP_TP(0)); writel(tsin->back_buffer_busaddr, tsin->irec + DMA_PRDS_BUSWP_TP(0)); writel(tsin->back_buffer_busaddr, tsin->irec + DMA_PRDS_BUSRP_TP(0)); /* initialize tasklet */ tasklet_setup(&tsin->tsklet, channel_swdemux_tsklet); return 0; err_unmap: free_input_block(fei, tsin); return ret; } static irqreturn_t c8sectpfe_error_irq_handler(int irq, void *priv) { struct c8sectpfei *fei = priv; dev_err(fei->dev, "%s: error handling not yet implemented\n" , __func__); /* * TODO FIXME we should detect some error conditions here * and ideally do something about them! */ return IRQ_HANDLED; } static int c8sectpfe_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *child, *np = dev->of_node; struct c8sectpfei *fei; struct resource *res; int ret, index = 0; struct channel_info *tsin; /* Allocate the c8sectpfei structure */ fei = devm_kzalloc(dev, sizeof(struct c8sectpfei), GFP_KERNEL); if (!fei) return -ENOMEM; fei->dev = dev; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "c8sectpfe"); fei->io = devm_ioremap_resource(dev, res); if (IS_ERR(fei->io)) return PTR_ERR(fei->io); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "c8sectpfe-ram"); fei->sram = devm_ioremap_resource(dev, res); if (IS_ERR(fei->sram)) return PTR_ERR(fei->sram); fei->sram_size = resource_size(res); fei->idle_irq = platform_get_irq_byname(pdev, "c8sectpfe-idle-irq"); if (fei->idle_irq < 0) return fei->idle_irq; fei->error_irq = platform_get_irq_byname(pdev, "c8sectpfe-error-irq"); if (fei->error_irq < 0) return fei->error_irq; platform_set_drvdata(pdev, fei); fei->c8sectpfeclk = devm_clk_get(dev, "c8sectpfe"); if (IS_ERR(fei->c8sectpfeclk)) { dev_err(dev, "c8sectpfe clk not found\n"); return PTR_ERR(fei->c8sectpfeclk); } ret = clk_prepare_enable(fei->c8sectpfeclk); if (ret) { dev_err(dev, "Failed to enable c8sectpfe clock\n"); return ret; } /* to save power disable all IP's (on by default) */ writel(0, fei->io + SYS_INPUT_CLKEN); /* Enable memdma clock */ writel(MEMDMAENABLE, fei->io + SYS_OTHER_CLKEN); /* clear internal sram */ memset_io(fei->sram, 0x0, fei->sram_size); c8sectpfe_getconfig(fei); ret = devm_request_irq(dev, fei->idle_irq, c8sectpfe_idle_irq_handler, 0, "c8sectpfe-idle-irq", fei); if (ret) { dev_err(dev, "Can't register c8sectpfe-idle-irq IRQ.\n"); goto err_clk_disable; } ret = devm_request_irq(dev, fei->error_irq, c8sectpfe_error_irq_handler, 0, "c8sectpfe-error-irq", fei); if (ret) { dev_err(dev, "Can't register c8sectpfe-error-irq IRQ.\n"); goto err_clk_disable; } fei->tsin_count = of_get_child_count(np); if (fei->tsin_count > C8SECTPFE_MAX_TSIN_CHAN || fei->tsin_count > fei->hw_stats.num_ib) { dev_err(dev, "More tsin declared than exist on SoC!\n"); ret = -EINVAL; goto err_clk_disable; } fei->pinctrl = devm_pinctrl_get(dev); if (IS_ERR(fei->pinctrl)) { dev_err(dev, "Error getting tsin pins\n"); ret = PTR_ERR(fei->pinctrl); goto err_clk_disable; } for_each_child_of_node(np, child) { struct device_node *i2c_bus; fei->channel_data[index] = devm_kzalloc(dev, sizeof(struct channel_info), GFP_KERNEL); if (!fei->channel_data[index]) { ret = -ENOMEM; goto err_node_put; } tsin = fei->channel_data[index]; tsin->fei = fei; ret = of_property_read_u32(child, "tsin-num", &tsin->tsin_id); if (ret) { dev_err(&pdev->dev, "No tsin_num found\n"); goto err_node_put; } /* sanity check value */ if (tsin->tsin_id > fei->hw_stats.num_ib) { dev_err(&pdev->dev, "tsin-num %d specified greater than number\n\tof input block hw in SoC! (%d)", tsin->tsin_id, fei->hw_stats.num_ib); ret = -EINVAL; goto err_node_put; } tsin->invert_ts_clk = of_property_read_bool(child, "invert-ts-clk"); tsin->serial_not_parallel = of_property_read_bool(child, "serial-not-parallel"); tsin->async_not_sync = of_property_read_bool(child, "async-not-sync"); ret = of_property_read_u32(child, "dvb-card", &tsin->dvb_card); if (ret) { dev_err(&pdev->dev, "No dvb-card found\n"); goto err_node_put; } i2c_bus = of_parse_phandle(child, "i2c-bus", 0); if (!i2c_bus) { dev_err(&pdev->dev, "No i2c-bus found\n"); ret = -ENODEV; goto err_node_put; } tsin->i2c_adapter = of_find_i2c_adapter_by_node(i2c_bus); if (!tsin->i2c_adapter) { dev_err(&pdev->dev, "No i2c adapter found\n"); of_node_put(i2c_bus); ret = -ENODEV; goto err_node_put; } of_node_put(i2c_bus); tsin->rst_gpio = of_get_named_gpio(child, "reset-gpios", 0); ret = gpio_is_valid(tsin->rst_gpio); if (!ret) { dev_err(dev, "reset gpio for tsin%d not valid (gpio=%d)\n", tsin->tsin_id, tsin->rst_gpio); ret = -EINVAL; goto err_node_put; } ret = devm_gpio_request_one(dev, tsin->rst_gpio, GPIOF_OUT_INIT_LOW, "NIM reset"); if (ret && ret != -EBUSY) { dev_err(dev, "Can't request tsin%d reset gpio\n" , fei->channel_data[index]->tsin_id); goto err_node_put; } if (!ret) { /* toggle reset lines */ gpio_direction_output(tsin->rst_gpio, 0); usleep_range(3500, 5000); gpio_direction_output(tsin->rst_gpio, 1); usleep_range(3000, 5000); } tsin->demux_mapping = index; dev_dbg(fei->dev, "channel=%p n=%d tsin_num=%d, invert-ts-clk=%d\n\tserial-not-parallel=%d pkt-clk-valid=%d dvb-card=%d\n", fei->channel_data[index], index, tsin->tsin_id, tsin->invert_ts_clk, tsin->serial_not_parallel, tsin->async_not_sync, tsin->dvb_card); index++; } /* Setup timer interrupt */ timer_setup(&fei->timer, c8sectpfe_timer_interrupt, 0); mutex_init(&fei->lock); /* Get the configuration information about the tuners */ ret = c8sectpfe_tuner_register_frontend(&fei->c8sectpfe[0], (void *)fei, c8sectpfe_start_feed, c8sectpfe_stop_feed); if (ret) { dev_err(dev, "c8sectpfe_tuner_register_frontend failed (%d)\n", ret); goto err_clk_disable; } c8sectpfe_debugfs_init(fei); return 0; err_node_put: of_node_put(child); err_clk_disable: clk_disable_unprepare(fei->c8sectpfeclk); return ret; } static int c8sectpfe_remove(struct platform_device *pdev) { struct c8sectpfei *fei = platform_get_drvdata(pdev); struct channel_info *channel; int i; wait_for_completion(&fei->fw_ack); c8sectpfe_tuner_unregister_frontend(fei->c8sectpfe[0], fei); /* * Now loop through and un-configure each of the InputBlock resources */ for (i = 0; i < fei->tsin_count; i++) { channel = fei->channel_data[i]; free_input_block(fei, channel); } c8sectpfe_debugfs_exit(fei); dev_info(fei->dev, "Stopping memdma SLIM core\n"); if (readl(fei->io + DMA_CPU_RUN)) writel(0x0, fei->io + DMA_CPU_RUN); /* unclock all internal IP's */ if (readl(fei->io + SYS_INPUT_CLKEN)) writel(0, fei->io + SYS_INPUT_CLKEN); if (readl(fei->io + SYS_OTHER_CLKEN)) writel(0, fei->io + SYS_OTHER_CLKEN); clk_disable_unprepare(fei->c8sectpfeclk); return 0; } static int configure_channels(struct c8sectpfei *fei) { int index = 0, ret; struct device_node *child, *np = fei->dev->of_node; /* iterate round each tsin and configure memdma descriptor and IB hw */ for_each_child_of_node(np, child) { ret = configure_memdma_and_inputblock(fei, fei->channel_data[index]); if (ret) { dev_err(fei->dev, "configure_memdma_and_inputblock failed\n"); goto err_unmap; } index++; } return 0; err_unmap: while (--index >= 0) free_input_block(fei, fei->channel_data[index]); return ret; } static int c8sectpfe_elf_sanity_check(struct c8sectpfei *fei, const struct firmware *fw) { struct elf32_hdr *ehdr; char class; if (!fw) { dev_err(fei->dev, "failed to load %s\n", FIRMWARE_MEMDMA); return -EINVAL; } if (fw->size < sizeof(struct elf32_hdr)) { dev_err(fei->dev, "Image is too small\n"); return -EINVAL; } ehdr = (struct elf32_hdr *)fw->data; /* We only support ELF32 at this point */ class = ehdr->e_ident[EI_CLASS]; if (class != ELFCLASS32) { dev_err(fei->dev, "Unsupported class: %d\n", class); return -EINVAL; } if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) { dev_err(fei->dev, "Unsupported firmware endianness\n"); return -EINVAL; } if (fw->size < ehdr->e_shoff + sizeof(struct elf32_shdr)) { dev_err(fei->dev, "Image is too small\n"); return -EINVAL; } if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG)) { dev_err(fei->dev, "Image is corrupted (bad magic)\n"); return -EINVAL; } /* Check ELF magic */ ehdr = (Elf32_Ehdr *)fw->data; if (ehdr->e_ident[EI_MAG0] != ELFMAG0 || ehdr->e_ident[EI_MAG1] != ELFMAG1 || ehdr->e_ident[EI_MAG2] != ELFMAG2 || ehdr->e_ident[EI_MAG3] != ELFMAG3) { dev_err(fei->dev, "Invalid ELF magic\n"); return -EINVAL; } if (ehdr->e_type != ET_EXEC) { dev_err(fei->dev, "Unsupported ELF header type\n"); return -EINVAL; } if (ehdr->e_phoff > fw->size) { dev_err(fei->dev, "Firmware size is too small\n"); return -EINVAL; } return 0; } static void load_imem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr, const struct firmware *fw, u8 __iomem *dest, int seg_num) { const u8 *imem_src = fw->data + phdr->p_offset; int i; /* * For IMEM segments, the segment contains 24-bit * instructions which must be padded to 32-bit * instructions before being written. The written * segment is padded with NOP instructions. */ dev_dbg(fei->dev, "Loading IMEM segment %d 0x%08x\n\t (0x%x bytes) -> 0x%p (0x%x bytes)\n", seg_num, phdr->p_paddr, phdr->p_filesz, dest, phdr->p_memsz + phdr->p_memsz / 3); for (i = 0; i < phdr->p_filesz; i++) { writeb(readb((void __iomem *)imem_src), (void __iomem *)dest); /* Every 3 bytes, add an additional * padding zero in destination */ if (i % 3 == 2) { dest++; writeb(0x00, (void __iomem *)dest); } dest++; imem_src++; } } static void load_dmem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr, const struct firmware *fw, u8 __iomem *dst, int seg_num) { /* * For DMEM segments copy the segment data from the ELF * file and pad segment with zeroes */ dev_dbg(fei->dev, "Loading DMEM segment %d 0x%08x\n\t(0x%x bytes) -> 0x%p (0x%x bytes)\n", seg_num, phdr->p_paddr, phdr->p_filesz, dst, phdr->p_memsz); memcpy((void __force *)dst, (void *)fw->data + phdr->p_offset, phdr->p_filesz); memset((void __force *)dst + phdr->p_filesz, 0, phdr->p_memsz - phdr->p_filesz); } static int load_slim_core_fw(const struct firmware *fw, struct c8sectpfei *fei) { Elf32_Ehdr *ehdr; Elf32_Phdr *phdr; u8 __iomem *dst; int err = 0, i; if (!fw || !fei) return -EINVAL; ehdr = (Elf32_Ehdr *)fw->data; phdr = (Elf32_Phdr *)(fw->data + ehdr->e_phoff); /* go through the available ELF segments */ for (i = 0; i < ehdr->e_phnum; i++, phdr++) { /* Only consider LOAD segments */ if (phdr->p_type != PT_LOAD) continue; /* * Check segment is contained within the fw->data buffer */ if (phdr->p_offset + phdr->p_filesz > fw->size) { dev_err(fei->dev, "Segment %d is outside of firmware file\n", i); err = -EINVAL; break; } /* * MEMDMA IMEM has executable flag set, otherwise load * this segment into DMEM. * */ if (phdr->p_flags & PF_X) { dst = (u8 __iomem *) fei->io + DMA_MEMDMA_IMEM; /* * The Slim ELF file uses 32-bit word addressing for * load offsets. */ dst += (phdr->p_paddr & 0xFFFFF) * sizeof(unsigned int); load_imem_segment(fei, phdr, fw, dst, i); } else { dst = (u8 __iomem *) fei->io + DMA_MEMDMA_DMEM; /* * The Slim ELF file uses 32-bit word addressing for * load offsets. */ dst += (phdr->p_paddr & 0xFFFFF) * sizeof(unsigned int); load_dmem_segment(fei, phdr, fw, dst, i); } } release_firmware(fw); return err; } static int load_c8sectpfe_fw(struct c8sectpfei *fei) { const struct firmware *fw; int err; dev_info(fei->dev, "Loading firmware: %s\n", FIRMWARE_MEMDMA); err = request_firmware(&fw, FIRMWARE_MEMDMA, fei->dev); if (err) return err; err = c8sectpfe_elf_sanity_check(fei, fw); if (err) { dev_err(fei->dev, "c8sectpfe_elf_sanity_check failed err=(%d)\n" , err); release_firmware(fw); return err; } err = load_slim_core_fw(fw, fei); if (err) { dev_err(fei->dev, "load_slim_core_fw failed err=(%d)\n", err); return err; } /* now the firmware is loaded configure the input blocks */ err = configure_channels(fei); if (err) { dev_err(fei->dev, "configure_channels failed err=(%d)\n", err); return err; } /* * STBus target port can access IMEM and DMEM ports * without waiting for CPU */ writel(0x1, fei->io + DMA_PER_STBUS_SYNC); dev_info(fei->dev, "Boot the memdma SLIM core\n"); writel(0x1, fei->io + DMA_CPU_RUN); atomic_set(&fei->fw_loaded, 1); return 0; } static const struct of_device_id c8sectpfe_match[] = { { .compatible = "st,stih407-c8sectpfe" }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, c8sectpfe_match); static struct platform_driver c8sectpfe_driver = { .driver = { .name = "c8sectpfe", .of_match_table = of_match_ptr(c8sectpfe_match), }, .probe = c8sectpfe_probe, .remove = c8sectpfe_remove, }; module_platform_driver(c8sectpfe_driver); MODULE_AUTHOR("Peter Bennett <peter.bennett@st.com>"); MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>"); MODULE_DESCRIPTION("C8SECTPFE STi DVB Driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1