Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Alexander Gordeev | 847 | 91.08% | 1 | 20.00% |
Sudip Mukherjee | 40 | 4.30% | 1 | 20.00% |
Arnd Bergmann | 22 | 2.37% | 1 | 20.00% |
Andy Shevchenko | 19 | 2.04% | 1 | 20.00% |
Thomas Gleixner | 2 | 0.22% | 1 | 20.00% |
Total | 930 | 5 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * pps_gen_parport.c -- kernel parallel port PPS signal generator * * Copyright (C) 2009 Alexander Gordeev <lasaine@lvk.cs.msu.su> */ /* * TODO: * fix issues when realtime clock is adjusted in a leap */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> #include <linux/time.h> #include <linux/hrtimer.h> #include <linux/parport.h> #define SIGNAL 0 #define NO_SIGNAL PARPORT_CONTROL_STROBE /* module parameters */ #define SEND_DELAY_MAX 100000 static unsigned int send_delay = 30000; MODULE_PARM_DESC(delay, "Delay between setting and dropping the signal (ns)"); module_param_named(delay, send_delay, uint, 0); #define SAFETY_INTERVAL 3000 /* set the hrtimer earlier for safety (ns) */ /* internal per port structure */ struct pps_generator_pp { struct pardevice *pardev; /* parport device */ struct hrtimer timer; long port_write_time; /* calibrated port write time (ns) */ }; static struct pps_generator_pp device = { .pardev = NULL, }; static int attached; /* calibrated time between a hrtimer event and the reaction */ static long hrtimer_error = SAFETY_INTERVAL; /* the kernel hrtimer event */ static enum hrtimer_restart hrtimer_event(struct hrtimer *timer) { struct timespec64 expire_time, ts1, ts2, ts3, dts; struct pps_generator_pp *dev; struct parport *port; long lim, delta; unsigned long flags; /* We have to disable interrupts here. The idea is to prevent * other interrupts on the same processor to introduce random * lags while polling the clock. ktime_get_real_ts64() takes <1us on * most machines while other interrupt handlers can take much * more potentially. * * NB: approx time with blocked interrupts = * send_delay + 3 * SAFETY_INTERVAL */ local_irq_save(flags); /* first of all we get the time stamp... */ ktime_get_real_ts64(&ts1); expire_time = ktime_to_timespec64(hrtimer_get_softexpires(timer)); dev = container_of(timer, struct pps_generator_pp, timer); lim = NSEC_PER_SEC - send_delay - dev->port_write_time; /* check if we are late */ if (expire_time.tv_sec != ts1.tv_sec || ts1.tv_nsec > lim) { local_irq_restore(flags); pr_err("we are late this time %lld.%09ld\n", (s64)ts1.tv_sec, ts1.tv_nsec); goto done; } /* busy loop until the time is right for an assert edge */ do { ktime_get_real_ts64(&ts2); } while (expire_time.tv_sec == ts2.tv_sec && ts2.tv_nsec < lim); /* set the signal */ port = dev->pardev->port; port->ops->write_control(port, SIGNAL); /* busy loop until the time is right for a clear edge */ lim = NSEC_PER_SEC - dev->port_write_time; do { ktime_get_real_ts64(&ts2); } while (expire_time.tv_sec == ts2.tv_sec && ts2.tv_nsec < lim); /* unset the signal */ port->ops->write_control(port, NO_SIGNAL); ktime_get_real_ts64(&ts3); local_irq_restore(flags); /* update calibrated port write time */ dts = timespec64_sub(ts3, ts2); dev->port_write_time = (dev->port_write_time + timespec64_to_ns(&dts)) >> 1; done: /* update calibrated hrtimer error */ dts = timespec64_sub(ts1, expire_time); delta = timespec64_to_ns(&dts); /* If the new error value is bigger then the old, use the new * value, if not then slowly move towards the new value. This * way it should be safe in bad conditions and efficient in * good conditions. */ if (delta >= hrtimer_error) hrtimer_error = delta; else hrtimer_error = (3 * hrtimer_error + delta) >> 2; /* update the hrtimer expire time */ hrtimer_set_expires(timer, ktime_set(expire_time.tv_sec + 1, NSEC_PER_SEC - (send_delay + dev->port_write_time + SAFETY_INTERVAL + 2 * hrtimer_error))); return HRTIMER_RESTART; } /* calibrate port write time */ #define PORT_NTESTS_SHIFT 5 static void calibrate_port(struct pps_generator_pp *dev) { struct parport *port = dev->pardev->port; int i; long acc = 0; for (i = 0; i < (1 << PORT_NTESTS_SHIFT); i++) { struct timespec64 a, b; unsigned long irq_flags; local_irq_save(irq_flags); ktime_get_real_ts64(&a); port->ops->write_control(port, NO_SIGNAL); ktime_get_real_ts64(&b); local_irq_restore(irq_flags); b = timespec64_sub(b, a); acc += timespec64_to_ns(&b); } dev->port_write_time = acc >> PORT_NTESTS_SHIFT; pr_info("port write takes %ldns\n", dev->port_write_time); } static inline ktime_t next_intr_time(struct pps_generator_pp *dev) { struct timespec64 ts; ktime_get_real_ts64(&ts); return ktime_set(ts.tv_sec + ((ts.tv_nsec > 990 * NSEC_PER_MSEC) ? 1 : 0), NSEC_PER_SEC - (send_delay + dev->port_write_time + 3 * SAFETY_INTERVAL)); } static void parport_attach(struct parport *port) { struct pardev_cb pps_cb; if (send_delay > SEND_DELAY_MAX) { pr_err("delay value should be not greater then %d\n", SEND_DELAY_MAX); return; } if (attached) { /* we already have a port */ return; } memset(&pps_cb, 0, sizeof(pps_cb)); pps_cb.private = &device; pps_cb.flags = PARPORT_FLAG_EXCL; device.pardev = parport_register_dev_model(port, KBUILD_MODNAME, &pps_cb, 0); if (!device.pardev) { pr_err("couldn't register with %s\n", port->name); return; } if (parport_claim_or_block(device.pardev) < 0) { pr_err("couldn't claim %s\n", port->name); goto err_unregister_dev; } pr_info("attached to %s\n", port->name); attached = 1; calibrate_port(&device); hrtimer_init(&device.timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); device.timer.function = hrtimer_event; hrtimer_start(&device.timer, next_intr_time(&device), HRTIMER_MODE_ABS); return; err_unregister_dev: parport_unregister_device(device.pardev); } static void parport_detach(struct parport *port) { if (port->cad != device.pardev) return; /* not our port */ hrtimer_cancel(&device.timer); parport_release(device.pardev); parport_unregister_device(device.pardev); } static struct parport_driver pps_gen_parport_driver = { .name = KBUILD_MODNAME, .match_port = parport_attach, .detach = parport_detach, .devmodel = true, }; module_parport_driver(pps_gen_parport_driver); MODULE_AUTHOR("Alexander Gordeev <lasaine@lvk.cs.msu.su>"); MODULE_DESCRIPTION("parallel port PPS signal generator"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1