Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Alistair Francis | 606 | 99.18% | 6 | 75.00% |
Axel Lin | 5 | 0.82% | 2 | 25.00% |
Total | 611 | 8 |
// SPDX-License-Identifier: GPL-2.0+ // // Functions to access SY3686A power management chip voltages // // Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/ // // Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com> // Alistair Francis <alistair@alistair23.me> #include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/mfd/sy7636a.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> #include <linux/regmap.h> struct sy7636a_data { struct regmap *regmap; struct gpio_desc *pgood_gpio; }; static int sy7636a_get_vcom_voltage_op(struct regulator_dev *rdev) { int ret; unsigned int val, val_h; ret = regmap_read(rdev->regmap, SY7636A_REG_VCOM_ADJUST_CTRL_L, &val); if (ret) return ret; ret = regmap_read(rdev->regmap, SY7636A_REG_VCOM_ADJUST_CTRL_H, &val_h); if (ret) return ret; val |= (val_h << VCOM_ADJUST_CTRL_SHIFT); return (val & VCOM_ADJUST_CTRL_MASK) * VCOM_ADJUST_CTRL_SCAL; } static int sy7636a_get_status(struct regulator_dev *rdev) { struct sy7636a_data *data = dev_get_drvdata(rdev->dev.parent); int ret = 0; ret = gpiod_get_value_cansleep(data->pgood_gpio); if (ret < 0) dev_err(&rdev->dev, "Failed to read pgood gpio: %d\n", ret); return ret; } static const struct regulator_ops sy7636a_vcom_volt_ops = { .get_voltage = sy7636a_get_vcom_voltage_op, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .get_status = sy7636a_get_status, }; static const struct regulator_desc desc = { .name = "vcom", .id = 0, .ops = &sy7636a_vcom_volt_ops, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = SY7636A_REG_OPERATION_MODE_CRL, .enable_mask = SY7636A_OPERATION_MODE_CRL_ONOFF, .regulators_node = of_match_ptr("regulators"), .of_match = of_match_ptr("vcom"), }; static int sy7636a_regulator_probe(struct platform_device *pdev) { struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL); struct regulator_config config = { }; struct regulator_dev *rdev; struct gpio_desc *gdp; struct sy7636a_data *data; int ret; if (!regmap) return -EPROBE_DEFER; gdp = devm_gpiod_get(pdev->dev.parent, "epd-pwr-good", GPIOD_IN); if (IS_ERR(gdp)) { dev_err(pdev->dev.parent, "Power good GPIO fault %ld\n", PTR_ERR(gdp)); return PTR_ERR(gdp); } data = devm_kzalloc(&pdev->dev, sizeof(struct sy7636a_data), GFP_KERNEL); if (!data) return -ENOMEM; data->regmap = regmap; data->pgood_gpio = gdp; platform_set_drvdata(pdev, data); ret = regmap_write(regmap, SY7636A_REG_POWER_ON_DELAY_TIME, 0x0); if (ret) { dev_err(pdev->dev.parent, "Failed to initialize regulator: %d\n", ret); return ret; } config.dev = &pdev->dev; config.dev->of_node = pdev->dev.parent->of_node; config.regmap = regmap; rdev = devm_regulator_register(&pdev->dev, &desc, &config); if (IS_ERR(rdev)) { dev_err(pdev->dev.parent, "Failed to register %s regulator\n", pdev->name); return PTR_ERR(rdev); } return 0; } static const struct platform_device_id sy7636a_regulator_id_table[] = { { "sy7636a-regulator", }, { } }; MODULE_DEVICE_TABLE(platform, sy7636a_regulator_id_table); static struct platform_driver sy7636a_regulator_driver = { .driver = { .name = "sy7636a-regulator", }, .probe = sy7636a_regulator_probe, .id_table = sy7636a_regulator_id_table, }; module_platform_driver(sy7636a_regulator_driver); MODULE_AUTHOR("Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>"); MODULE_DESCRIPTION("SY7636A voltage regulator driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1