Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Joshua Clayton | 1262 | 87.70% | 2 | 20.00% |
Anatolij Gustschin | 132 | 9.17% | 2 | 20.00% |
Phil Reid | 30 | 2.08% | 1 | 10.00% |
Alan Tull | 10 | 0.69% | 2 | 20.00% |
Thomas Gleixner | 2 | 0.14% | 1 | 10.00% |
Russ Weight | 2 | 0.14% | 1 | 10.00% |
Colin Ian King | 1 | 0.07% | 1 | 10.00% |
Total | 1439 | 10 |
// SPDX-License-Identifier: GPL-2.0-only /* * Altera Passive Serial SPI Driver * * Copyright (c) 2017 United Western Technologies, Corporation * * Joshua Clayton <stillcompiling@gmail.com> * * Manage Altera FPGA firmware that is loaded over SPI using the passive * serial configuration method. * Firmware must be in binary "rbf" format. * Works on Arria 10, Cyclone V and Stratix V. Should work on Cyclone series. * May work on other Altera FPGAs. */ #include <linux/bitrev.h> #include <linux/delay.h> #include <linux/fpga/fpga-mgr.h> #include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/of_gpio.h> #include <linux/of_device.h> #include <linux/spi/spi.h> #include <linux/sizes.h> enum altera_ps_devtype { CYCLONE5, ARRIA10, }; struct altera_ps_data { enum altera_ps_devtype devtype; int status_wait_min_us; int status_wait_max_us; int t_cfg_us; int t_st2ck_us; }; struct altera_ps_conf { struct gpio_desc *config; struct gpio_desc *confd; struct gpio_desc *status; struct spi_device *spi; const struct altera_ps_data *data; u32 info_flags; char mgr_name[64]; }; /* | Arria 10 | Cyclone5 | Stratix5 | * t_CF2ST0 | [; 600] | [; 600] | [; 600] |ns * t_CFG | [2;] | [2;] | [2;] |µs * t_STATUS | [268; 3000] | [268; 1506] | [268; 1506] |µs * t_CF2ST1 | [; 3000] | [; 1506] | [; 1506] |µs * t_CF2CK | [3010;] | [1506;] | [1506;] |µs * t_ST2CK | [10;] | [2;] | [2;] |µs * t_CD2UM | [175; 830] | [175; 437] | [175; 437] |µs */ static struct altera_ps_data c5_data = { /* these values for Cyclone5 are compatible with Stratix5 */ .devtype = CYCLONE5, .status_wait_min_us = 268, .status_wait_max_us = 1506, .t_cfg_us = 2, .t_st2ck_us = 2, }; static struct altera_ps_data a10_data = { .devtype = ARRIA10, .status_wait_min_us = 268, /* min(t_STATUS) */ .status_wait_max_us = 3000, /* max(t_CF2ST1) */ .t_cfg_us = 2, /* max { min(t_CFG), max(tCF2ST0) } */ .t_st2ck_us = 10, /* min(t_ST2CK) */ }; /* Array index is enum altera_ps_devtype */ static const struct altera_ps_data *altera_ps_data_map[] = { &c5_data, &a10_data, }; static const struct of_device_id of_ef_match[] = { { .compatible = "altr,fpga-passive-serial", .data = &c5_data }, { .compatible = "altr,fpga-arria10-passive-serial", .data = &a10_data }, {} }; MODULE_DEVICE_TABLE(of, of_ef_match); static enum fpga_mgr_states altera_ps_state(struct fpga_manager *mgr) { struct altera_ps_conf *conf = mgr->priv; if (gpiod_get_value_cansleep(conf->status)) return FPGA_MGR_STATE_RESET; return FPGA_MGR_STATE_UNKNOWN; } static inline void altera_ps_delay(int delay_us) { if (delay_us > 10) usleep_range(delay_us, delay_us + 5); else udelay(delay_us); } static int altera_ps_write_init(struct fpga_manager *mgr, struct fpga_image_info *info, const char *buf, size_t count) { struct altera_ps_conf *conf = mgr->priv; int min, max, waits; int i; conf->info_flags = info->flags; if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) { dev_err(&mgr->dev, "Partial reconfiguration not supported.\n"); return -EINVAL; } gpiod_set_value_cansleep(conf->config, 1); /* wait min reset pulse time */ altera_ps_delay(conf->data->t_cfg_us); if (!gpiod_get_value_cansleep(conf->status)) { dev_err(&mgr->dev, "Status pin failed to show a reset\n"); return -EIO; } gpiod_set_value_cansleep(conf->config, 0); min = conf->data->status_wait_min_us; max = conf->data->status_wait_max_us; waits = max / min; if (max % min) waits++; /* wait for max { max(t_STATUS), max(t_CF2ST1) } */ for (i = 0; i < waits; i++) { usleep_range(min, min + 10); if (!gpiod_get_value_cansleep(conf->status)) { /* wait for min(t_ST2CK)*/ altera_ps_delay(conf->data->t_st2ck_us); return 0; } } dev_err(&mgr->dev, "Status pin not ready.\n"); return -EIO; } static void rev_buf(char *buf, size_t len) { u32 *fw32 = (u32 *)buf; size_t extra_bytes = (len & 0x03); const u32 *fw_end = (u32 *)(buf + len - extra_bytes); /* set buffer to lsb first */ while (fw32 < fw_end) { *fw32 = bitrev8x4(*fw32); fw32++; } if (extra_bytes) { buf = (char *)fw_end; while (extra_bytes) { *buf = bitrev8(*buf); buf++; extra_bytes--; } } } static int altera_ps_write(struct fpga_manager *mgr, const char *buf, size_t count) { struct altera_ps_conf *conf = mgr->priv; const char *fw_data = buf; const char *fw_data_end = fw_data + count; while (fw_data < fw_data_end) { int ret; size_t stride = min_t(size_t, fw_data_end - fw_data, SZ_4K); if (!(conf->info_flags & FPGA_MGR_BITSTREAM_LSB_FIRST)) rev_buf((char *)fw_data, stride); ret = spi_write(conf->spi, fw_data, stride); if (ret) { dev_err(&mgr->dev, "spi error in firmware write: %d\n", ret); return ret; } fw_data += stride; } return 0; } static int altera_ps_write_complete(struct fpga_manager *mgr, struct fpga_image_info *info) { struct altera_ps_conf *conf = mgr->priv; static const char dummy[] = {0}; int ret; if (gpiod_get_value_cansleep(conf->status)) { dev_err(&mgr->dev, "Error during configuration.\n"); return -EIO; } if (conf->confd) { if (!gpiod_get_raw_value_cansleep(conf->confd)) { dev_err(&mgr->dev, "CONF_DONE is inactive!\n"); return -EIO; } } /* * After CONF_DONE goes high, send two additional falling edges on DCLK * to begin initialization and enter user mode */ ret = spi_write(conf->spi, dummy, 1); if (ret) { dev_err(&mgr->dev, "spi error during end sequence: %d\n", ret); return ret; } return 0; } static const struct fpga_manager_ops altera_ps_ops = { .state = altera_ps_state, .write_init = altera_ps_write_init, .write = altera_ps_write, .write_complete = altera_ps_write_complete, }; static const struct altera_ps_data *id_to_data(const struct spi_device_id *id) { kernel_ulong_t devtype = id->driver_data; const struct altera_ps_data *data; /* someone added a altera_ps_devtype without adding to the map array */ if (devtype >= ARRAY_SIZE(altera_ps_data_map)) return NULL; data = altera_ps_data_map[devtype]; if (!data || data->devtype != devtype) return NULL; return data; } static int altera_ps_probe(struct spi_device *spi) { struct altera_ps_conf *conf; const struct of_device_id *of_id; struct fpga_manager *mgr; conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL); if (!conf) return -ENOMEM; if (spi->dev.of_node) { of_id = of_match_device(of_ef_match, &spi->dev); if (!of_id) return -ENODEV; conf->data = of_id->data; } else { conf->data = id_to_data(spi_get_device_id(spi)); if (!conf->data) return -ENODEV; } conf->spi = spi; conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_LOW); if (IS_ERR(conf->config)) { dev_err(&spi->dev, "Failed to get config gpio: %ld\n", PTR_ERR(conf->config)); return PTR_ERR(conf->config); } conf->status = devm_gpiod_get(&spi->dev, "nstat", GPIOD_IN); if (IS_ERR(conf->status)) { dev_err(&spi->dev, "Failed to get status gpio: %ld\n", PTR_ERR(conf->status)); return PTR_ERR(conf->status); } conf->confd = devm_gpiod_get_optional(&spi->dev, "confd", GPIOD_IN); if (IS_ERR(conf->confd)) { dev_err(&spi->dev, "Failed to get confd gpio: %ld\n", PTR_ERR(conf->confd)); return PTR_ERR(conf->confd); } else if (!conf->confd) { dev_warn(&spi->dev, "Not using confd gpio"); } /* Register manager with unique name */ snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s %s", dev_driver_string(&spi->dev), dev_name(&spi->dev)); mgr = devm_fpga_mgr_register(&spi->dev, conf->mgr_name, &altera_ps_ops, conf); return PTR_ERR_OR_ZERO(mgr); } static const struct spi_device_id altera_ps_spi_ids[] = { { "cyclone-ps-spi", CYCLONE5 }, { "fpga-passive-serial", CYCLONE5 }, { "fpga-arria10-passive-serial", ARRIA10 }, {} }; MODULE_DEVICE_TABLE(spi, altera_ps_spi_ids); static struct spi_driver altera_ps_driver = { .driver = { .name = "altera-ps-spi", .owner = THIS_MODULE, .of_match_table = of_match_ptr(of_ef_match), }, .id_table = altera_ps_spi_ids, .probe = altera_ps_probe, }; module_spi_driver(altera_ps_driver) MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Joshua Clayton <stillcompiling@gmail.com>"); MODULE_DESCRIPTION("Module to load Altera FPGA firmware over SPI");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1