| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Liviu Dudau | 533 | 58.19% | 3 | 15.79% |
| Mihail Atanassov | 244 | 26.64% | 9 | 47.37% |
| Ayan Halder | 63 | 6.88% | 1 | 5.26% |
| Jamie Fox | 36 | 3.93% | 1 | 5.26% |
| Alexandru Gheorghe | 32 | 3.49% | 2 | 10.53% |
| Wen He | 5 | 0.55% | 1 | 5.26% |
| Thomas Gleixner | 2 | 0.22% | 1 | 5.26% |
| pengfuyuan | 1 | 0.11% | 1 | 5.26% |
| Total | 916 | 19 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * (C) COPYRIGHT 2016 ARM Limited. All rights reserved. * Author: Liviu Dudau <Liviu.Dudau@arm.com> * * ARM Mali DP500/DP550/DP650 registers definition. */ #ifndef __MALIDP_REGS_H__ #define __MALIDP_REGS_H__ /* * abbreviations used: * - DC - display core (general settings) * - DE - display engine * - SE - scaling engine */ /* interrupt bit masks */ #define MALIDP_DE_IRQ_UNDERRUN (1 << 0) #define MALIDP500_DE_IRQ_AXI_ERR (1 << 4) #define MALIDP500_DE_IRQ_VSYNC (1 << 5) #define MALIDP500_DE_IRQ_PROG_LINE (1 << 6) #define MALIDP500_DE_IRQ_SATURATION (1 << 7) #define MALIDP500_DE_IRQ_CONF_VALID (1 << 8) #define MALIDP500_DE_IRQ_CONF_MODE (1 << 11) #define MALIDP500_DE_IRQ_CONF_ACTIVE (1 << 17) #define MALIDP500_DE_IRQ_PM_ACTIVE (1 << 18) #define MALIDP500_DE_IRQ_TESTMODE_ACTIVE (1 << 19) #define MALIDP500_DE_IRQ_FORCE_BLNK_ACTIVE (1 << 24) #define MALIDP500_DE_IRQ_AXI_BUSY (1 << 28) #define MALIDP500_DE_IRQ_GLOBAL (1 << 31) #define MALIDP500_SE_IRQ_CONF_MODE (1 << 0) #define MALIDP500_SE_IRQ_CONF_VALID (1 << 4) #define MALIDP500_SE_IRQ_INIT_BUSY (1 << 5) #define MALIDP500_SE_IRQ_AXI_ERROR (1 << 8) #define MALIDP500_SE_IRQ_OVERRUN (1 << 9) #define MALIDP500_SE_IRQ_PROG_LINE1 (1 << 12) #define MALIDP500_SE_IRQ_PROG_LINE2 (1 << 13) #define MALIDP500_SE_IRQ_CONF_ACTIVE (1 << 17) #define MALIDP500_SE_IRQ_PM_ACTIVE (1 << 18) #define MALIDP500_SE_IRQ_AXI_BUSY (1 << 28) #define MALIDP500_SE_IRQ_GLOBAL (1 << 31) #define MALIDP550_DE_IRQ_SATURATION (1 << 8) #define MALIDP550_DE_IRQ_VSYNC (1 << 12) #define MALIDP550_DE_IRQ_PROG_LINE (1 << 13) #define MALIDP550_DE_IRQ_AXI_ERR (1 << 16) #define MALIDP550_SE_IRQ_EOW (1 << 0) #define MALIDP550_SE_IRQ_AXI_ERR (1 << 16) #define MALIDP550_SE_IRQ_OVR (1 << 17) #define MALIDP550_SE_IRQ_IBSY (1 << 18) #define MALIDP550_DC_IRQ_CONF_VALID (1 << 0) #define MALIDP550_DC_IRQ_CONF_MODE (1 << 4) #define MALIDP550_DC_IRQ_CONF_ACTIVE (1 << 16) #define MALIDP550_DC_IRQ_DE (1 << 20) #define MALIDP550_DC_IRQ_SE (1 << 24) #define MALIDP650_DE_IRQ_DRIFT (1 << 4) #define MALIDP650_DE_IRQ_ACEV1 (1 << 17) #define MALIDP650_DE_IRQ_ACEV2 (1 << 18) #define MALIDP650_DE_IRQ_ACEG (1 << 19) #define MALIDP650_DE_IRQ_AXIEP (1 << 28) /* bit masks that are common between products */ #define MALIDP_CFG_VALID (1 << 0) #define MALIDP_DISP_FUNC_GAMMA (1 << 0) #define MALIDP_DISP_FUNC_CADJ (1 << 4) #define MALIDP_DISP_FUNC_ILACED (1 << 8) #define MALIDP_SCALE_ENGINE_EN (1 << 16) #define MALIDP_SE_MEMWRITE_EN (2 << 5) /* register offsets for IRQ management */ #define MALIDP_REG_STATUS 0x00000 #define MALIDP_REG_SETIRQ 0x00004 #define MALIDP_REG_MASKIRQ 0x00008 #define MALIDP_REG_CLEARIRQ 0x0000c /* register offsets */ #define MALIDP_DE_CORE_ID 0x00018 #define MALIDP_DE_DISPLAY_FUNC 0x00020 /* these offsets are relative to MALIDP5x0_TIMINGS_BASE */ #define MALIDP_DE_H_TIMINGS 0x0 #define MALIDP_DE_V_TIMINGS 0x4 #define MALIDP_DE_SYNC_WIDTH 0x8 #define MALIDP_DE_HV_ACTIVE 0xc /* Stride register offsets relative to Lx_BASE */ #define MALIDP_DE_LG_STRIDE 0x18 #define MALIDP_DE_LV_STRIDE0 0x18 #define MALIDP550_DE_LS_R1_STRIDE 0x28 /* macros to set values into registers */ #define MALIDP_DE_H_FRONTPORCH(x) (((x) & 0xfff) << 0) #define MALIDP_DE_H_BACKPORCH(x) (((x) & 0x3ff) << 16) #define MALIDP500_DE_V_FRONTPORCH(x) (((x) & 0xff) << 0) #define MALIDP550_DE_V_FRONTPORCH(x) (((x) & 0xfff) << 0) #define MALIDP_DE_V_BACKPORCH(x) (((x) & 0xff) << 16) #define MALIDP_DE_H_SYNCWIDTH(x) (((x) & 0x3ff) << 0) #define MALIDP_DE_V_SYNCWIDTH(x) (((x) & 0xff) << 16) #define MALIDP_DE_H_ACTIVE(x) (((x) & 0x1fff) << 0) #define MALIDP_DE_V_ACTIVE(x) (((x) & 0x1fff) << 16) #define MALIDP_PRODUCT_ID(__core_id) ((u32)(__core_id) >> 16) /* register offsets relative to MALIDP5x0_COEFFS_BASE */ #define MALIDP_COLOR_ADJ_COEF 0x00000 #define MALIDP_COEF_TABLE_ADDR 0x00030 #define MALIDP_COEF_TABLE_DATA 0x00034 /* Scaling engine registers and masks. */ #define MALIDP_SE_SCALING_EN (1 << 0) #define MALIDP_SE_ALPHA_EN (1 << 1) #define MALIDP_SE_ENH_MASK 3 #define MALIDP_SE_ENH(x) (((x) & MALIDP_SE_ENH_MASK) << 2) #define MALIDP_SE_RGBO_IF_EN (1 << 4) #define MALIDP550_SE_CTL_SEL_MASK 7 #define MALIDP550_SE_CTL_VCSEL(x) \ (((x) & MALIDP550_SE_CTL_SEL_MASK) << 20) #define MALIDP550_SE_CTL_HCSEL(x) \ (((x) & MALIDP550_SE_CTL_SEL_MASK) << 16) /* Blocks with offsets from SE_CONTROL register. */ #define MALIDP_SE_LAYER_CONTROL 0x14 #define MALIDP_SE_L0_IN_SIZE 0x00 #define MALIDP_SE_L0_OUT_SIZE 0x04 #define MALIDP_SE_SET_V_SIZE(x) (((x) & 0x1fff) << 16) #define MALIDP_SE_SET_H_SIZE(x) (((x) & 0x1fff) << 0) #define MALIDP_SE_SCALING_CONTROL 0x24 #define MALIDP_SE_H_INIT_PH 0x00 #define MALIDP_SE_H_DELTA_PH 0x04 #define MALIDP_SE_V_INIT_PH 0x08 #define MALIDP_SE_V_DELTA_PH 0x0c #define MALIDP_SE_COEFFTAB_ADDR 0x10 #define MALIDP_SE_COEFFTAB_ADDR_MASK 0x7f #define MALIDP_SE_V_COEFFTAB (1 << 8) #define MALIDP_SE_H_COEFFTAB (1 << 9) #define MALIDP_SE_SET_V_COEFFTAB_ADDR(x) \ (MALIDP_SE_V_COEFFTAB | ((x) & MALIDP_SE_COEFFTAB_ADDR_MASK)) #define MALIDP_SE_SET_H_COEFFTAB_ADDR(x) \ (MALIDP_SE_H_COEFFTAB | ((x) & MALIDP_SE_COEFFTAB_ADDR_MASK)) #define MALIDP_SE_COEFFTAB_DATA 0x14 #define MALIDP_SE_COEFFTAB_DATA_MASK 0x3fff #define MALIDP_SE_SET_COEFFTAB_DATA(x) \ ((x) & MALIDP_SE_COEFFTAB_DATA_MASK) /* Enhance coefficients register offset */ #define MALIDP_SE_IMAGE_ENH 0x3C /* ENH_LIMITS offset 0x0 */ #define MALIDP_SE_ENH_LOW_LEVEL 24 #define MALIDP_SE_ENH_HIGH_LEVEL 63 #define MALIDP_SE_ENH_LIMIT_MASK 0xfff #define MALIDP_SE_SET_ENH_LIMIT_LOW(x) \ ((x) & MALIDP_SE_ENH_LIMIT_MASK) #define MALIDP_SE_SET_ENH_LIMIT_HIGH(x) \ (((x) & MALIDP_SE_ENH_LIMIT_MASK) << 16) #define MALIDP_SE_ENH_COEFF0 0x04 /* register offsets relative to MALIDP5x0_SE_MEMWRITE_BASE */ #define MALIDP_MW_FORMAT 0x00000 #define MALIDP_MW_P1_STRIDE 0x00004 #define MALIDP_MW_P2_STRIDE 0x00008 #define MALIDP_MW_P1_PTR_LOW 0x0000c #define MALIDP_MW_P1_PTR_HIGH 0x00010 #define MALIDP_MW_P2_PTR_LOW 0x0002c #define MALIDP_MW_P2_PTR_HIGH 0x00030 /* register offsets and bits specific to DP500 */ #define MALIDP500_ADDR_SPACE_SIZE 0x01000 #define MALIDP500_DC_BASE 0x00000 #define MALIDP500_DC_CONTROL 0x0000c #define MALIDP500_DC_CONFIG_REQ (1 << 17) #define MALIDP500_HSYNCPOL (1 << 20) #define MALIDP500_VSYNCPOL (1 << 21) #define MALIDP500_DC_CLEAR_MASK 0x300fff #define MALIDP500_DE_LINE_COUNTER 0x00010 #define MALIDP500_DE_AXI_CONTROL 0x00014 #define MALIDP500_DE_SECURE_CTRL 0x0001c #define MALIDP500_DE_CHROMA_KEY 0x00024 #define MALIDP500_TIMINGS_BASE 0x00028 #define MALIDP500_CONFIG_3D 0x00038 #define MALIDP500_BGND_COLOR 0x0003c #define MALIDP500_OUTPUT_DEPTH 0x00044 #define MALIDP500_COEFFS_BASE 0x00078 /* * The YUV2RGB coefficients on the DP500 are not in the video layer's register * block. They belong in a separate block above the layer's registers, hence * the negative offset. */ #define MALIDP500_LV_YUV2RGB ((s16)(-0xB8)) #define MALIDP500_DE_LV_BASE 0x00100 #define MALIDP500_DE_LV_PTR_BASE 0x00124 #define MALIDP500_DE_LV_AD_CTRL 0x00400 #define MALIDP500_DE_LG1_BASE 0x00200 #define MALIDP500_DE_LG1_PTR_BASE 0x0021c #define MALIDP500_DE_LG1_AD_CTRL 0x0040c #define MALIDP500_DE_LG2_BASE 0x00300 #define MALIDP500_DE_LG2_PTR_BASE 0x0031c #define MALIDP500_DE_LG2_AD_CTRL 0x00418 #define MALIDP500_SE_BASE 0x00c00 #define MALIDP500_SE_CONTROL 0x00c0c #define MALIDP500_SE_MEMWRITE_OUT_SIZE 0x00c2c #define MALIDP500_SE_RGB_YUV_COEFFS 0x00C74 #define MALIDP500_SE_MEMWRITE_BASE 0x00e00 #define MALIDP500_DC_IRQ_BASE 0x00f00 #define MALIDP500_CONFIG_VALID 0x00f00 #define MALIDP500_CONFIG_ID 0x00fd4 /* * The quality of service (QoS) register on the DP500. RQOS register values * are driven by the ARQOS signal, using AXI transacations, dependent on the * FIFO input level. * The RQOS register can also set QoS levels for: * - RED_ARQOS @ A 4-bit signal value for close to underflow conditions * - GREEN_ARQOS @ A 4-bit signal value for normal conditions */ #define MALIDP500_RQOS_QUALITY 0x00500 /* register offsets and bits specific to DP550/DP650 */ #define MALIDP550_ADDR_SPACE_SIZE 0x10000 #define MALIDP550_DE_CONTROL 0x00010 #define MALIDP550_DE_LINE_COUNTER 0x00014 #define MALIDP550_DE_AXI_CONTROL 0x00018 #define MALIDP550_DE_QOS 0x0001c #define MALIDP550_TIMINGS_BASE 0x00030 #define MALIDP550_HSYNCPOL (1 << 12) #define MALIDP550_VSYNCPOL (1 << 28) #define MALIDP550_DE_DISP_SIDEBAND 0x00040 #define MALIDP550_DE_BGND_COLOR 0x00044 #define MALIDP550_DE_OUTPUT_DEPTH 0x0004c #define MALIDP550_COEFFS_BASE 0x00050 #define MALIDP550_LV_YUV2RGB 0x00084 #define MALIDP550_DE_LV1_BASE 0x00100 #define MALIDP550_DE_LV1_PTR_BASE 0x00124 #define MALIDP550_DE_LV1_AD_CTRL 0x001B8 #define MALIDP550_DE_LV2_BASE 0x00200 #define MALIDP550_DE_LV2_PTR_BASE 0x00224 #define MALIDP550_DE_LV2_AD_CTRL 0x002B8 #define MALIDP550_DE_LG_BASE 0x00300 #define MALIDP550_DE_LG_PTR_BASE 0x0031c #define MALIDP550_DE_LG_AD_CTRL 0x00330 #define MALIDP550_DE_LS_BASE 0x00400 #define MALIDP550_DE_LS_PTR_BASE 0x0042c #define MALIDP550_DE_PERF_BASE 0x00500 #define MALIDP550_SE_BASE 0x08000 #define MALIDP550_SE_CONTROL 0x08010 #define MALIDP550_SE_MEMWRITE_ONESHOT (1 << 7) #define MALIDP550_SE_MEMWRITE_OUT_SIZE 0x08030 #define MALIDP550_SE_RGB_YUV_COEFFS 0x08078 #define MALIDP550_SE_MEMWRITE_BASE 0x08100 #define MALIDP550_DC_BASE 0x0c000 #define MALIDP550_DC_CONTROL 0x0c010 #define MALIDP550_DC_CONFIG_REQ (1 << 16) #define MALIDP550_CONFIG_VALID 0x0c014 #define MALIDP550_CONFIG_ID 0x0ffd4 /* register offsets specific to DP650 */ #define MALIDP650_DE_LV_MMU_CTRL 0x000D0 #define MALIDP650_DE_LG_MMU_CTRL 0x00048 #define MALIDP650_DE_LS_MMU_CTRL 0x00078 /* bit masks to set the MMU control register */ #define MALIDP_MMU_CTRL_EN (1 << 0) #define MALIDP_MMU_CTRL_MODE (1 << 4) #define MALIDP_MMU_CTRL_PX_PS(x) (1 << (8 + (x))) #define MALIDP_MMU_CTRL_PP_NUM_REQ(x) (((x) & 0x7f) << 12) /* AFBC register offsets relative to MALIDPXXX_DE_LX_AD_CTRL */ /* The following register offsets are common for DP500, DP550 and DP650 */ #define MALIDP_AD_CROP_H 0x4 #define MALIDP_AD_CROP_V 0x8 #define MALIDP_AD_END_PTR_LOW 0xc #define MALIDP_AD_END_PTR_HIGH 0x10 /* AFBC decoder Registers */ #define MALIDP_AD_EN BIT(0) #define MALIDP_AD_YTR BIT(4) #define MALIDP_AD_BS BIT(8) #define MALIDP_AD_CROP_RIGHT_OFFSET 16 #define MALIDP_AD_CROP_BOTTOM_OFFSET 16 /* * Starting with DP550 the register map blocks has been standardised to the * following layout: * * Offset Block registers * 0x00000 Display Engine * 0x08000 Scaling Engine * 0x0c000 Display Core * 0x10000 Secure control * * The old DP500 IP mixes some DC with the DE registers, hence the need * for a mapping structure. */ #endif /* __MALIDP_REGS_H__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1