Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Thierry Reding | 1421 | 36.16% | 19 | 42.22% |
Andrzej Hajda | 1027 | 26.13% | 2 | 4.44% |
Archit Taneja | 367 | 9.34% | 5 | 11.11% |
YoungJun Cho | 351 | 8.93% | 2 | 4.44% |
Maxime Ripard | 188 | 4.78% | 3 | 6.67% |
Jani Nikula | 177 | 4.50% | 3 | 6.67% |
Vinay Simha BN | 171 | 4.35% | 2 | 4.44% |
Werner Johansson | 124 | 3.16% | 1 | 2.22% |
Philippe Cornu | 42 | 1.07% | 1 | 2.22% |
Emil Velikov | 37 | 0.94% | 2 | 4.44% |
Suraj Upadhyay | 15 | 0.38% | 1 | 2.22% |
Thomas Zimmermann | 4 | 0.10% | 1 | 2.22% |
Uwe Kleine-König | 3 | 0.08% | 1 | 2.22% |
Rob Herring | 2 | 0.05% | 1 | 2.22% |
Suzuki K. Poulose | 1 | 0.03% | 1 | 2.22% |
Total | 3930 | 45 |
/* * MIPI DSI Bus * * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. * Andrzej Hajda <a.hajda@samsung.com> * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE * USE OR OTHER DEALINGS IN THE SOFTWARE. */ #include <linux/device.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/pm_runtime.h> #include <linux/slab.h> #include <drm/display/drm_dsc.h> #include <drm/drm_mipi_dsi.h> #include <drm/drm_print.h> #include <video/mipi_display.h> /** * DOC: dsi helpers * * These functions contain some common logic and helpers to deal with MIPI DSI * peripherals. * * Helpers are provided for a number of standard MIPI DSI command as well as a * subset of the MIPI DCS command set. */ static int mipi_dsi_device_match(struct device *dev, struct device_driver *drv) { struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev); /* attempt OF style match */ if (of_driver_match_device(dev, drv)) return 1; /* compare DSI device and driver names */ if (!strcmp(dsi->name, drv->name)) return 1; return 0; } static int mipi_dsi_uevent(struct device *dev, struct kobj_uevent_env *env) { struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev); int err; err = of_device_uevent_modalias(dev, env); if (err != -ENODEV) return err; add_uevent_var(env, "MODALIAS=%s%s", MIPI_DSI_MODULE_PREFIX, dsi->name); return 0; } static const struct dev_pm_ops mipi_dsi_device_pm_ops = { .runtime_suspend = pm_generic_runtime_suspend, .runtime_resume = pm_generic_runtime_resume, .suspend = pm_generic_suspend, .resume = pm_generic_resume, .freeze = pm_generic_freeze, .thaw = pm_generic_thaw, .poweroff = pm_generic_poweroff, .restore = pm_generic_restore, }; static struct bus_type mipi_dsi_bus_type = { .name = "mipi-dsi", .match = mipi_dsi_device_match, .uevent = mipi_dsi_uevent, .pm = &mipi_dsi_device_pm_ops, }; /** * of_find_mipi_dsi_device_by_node() - find the MIPI DSI device matching a * device tree node * @np: device tree node * * Return: A pointer to the MIPI DSI device corresponding to @np or NULL if no * such device exists (or has not been registered yet). */ struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np) { struct device *dev; dev = bus_find_device_by_of_node(&mipi_dsi_bus_type, np); return dev ? to_mipi_dsi_device(dev) : NULL; } EXPORT_SYMBOL(of_find_mipi_dsi_device_by_node); static void mipi_dsi_dev_release(struct device *dev) { struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev); of_node_put(dev->of_node); kfree(dsi); } static const struct device_type mipi_dsi_device_type = { .release = mipi_dsi_dev_release, }; static struct mipi_dsi_device *mipi_dsi_device_alloc(struct mipi_dsi_host *host) { struct mipi_dsi_device *dsi; dsi = kzalloc(sizeof(*dsi), GFP_KERNEL); if (!dsi) return ERR_PTR(-ENOMEM); dsi->host = host; dsi->dev.bus = &mipi_dsi_bus_type; dsi->dev.parent = host->dev; dsi->dev.type = &mipi_dsi_device_type; device_initialize(&dsi->dev); return dsi; } static int mipi_dsi_device_add(struct mipi_dsi_device *dsi) { struct mipi_dsi_host *host = dsi->host; dev_set_name(&dsi->dev, "%s.%d", dev_name(host->dev), dsi->channel); return device_add(&dsi->dev); } #if IS_ENABLED(CONFIG_OF) static struct mipi_dsi_device * of_mipi_dsi_device_add(struct mipi_dsi_host *host, struct device_node *node) { struct mipi_dsi_device_info info = { }; int ret; u32 reg; if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) { drm_err(host, "modalias failure on %pOF\n", node); return ERR_PTR(-EINVAL); } ret = of_property_read_u32(node, "reg", ®); if (ret) { drm_err(host, "device node %pOF has no valid reg property: %d\n", node, ret); return ERR_PTR(-EINVAL); } info.channel = reg; info.node = of_node_get(node); return mipi_dsi_device_register_full(host, &info); } #else static struct mipi_dsi_device * of_mipi_dsi_device_add(struct mipi_dsi_host *host, struct device_node *node) { return ERR_PTR(-ENODEV); } #endif /** * mipi_dsi_device_register_full - create a MIPI DSI device * @host: DSI host to which this device is connected * @info: pointer to template containing DSI device information * * Create a MIPI DSI device by using the device information provided by * mipi_dsi_device_info template * * Returns: * A pointer to the newly created MIPI DSI device, or, a pointer encoded * with an error */ struct mipi_dsi_device * mipi_dsi_device_register_full(struct mipi_dsi_host *host, const struct mipi_dsi_device_info *info) { struct mipi_dsi_device *dsi; int ret; if (!info) { drm_err(host, "invalid mipi_dsi_device_info pointer\n"); return ERR_PTR(-EINVAL); } if (info->channel > 3) { drm_err(host, "invalid virtual channel: %u\n", info->channel); return ERR_PTR(-EINVAL); } dsi = mipi_dsi_device_alloc(host); if (IS_ERR(dsi)) { drm_err(host, "failed to allocate DSI device %ld\n", PTR_ERR(dsi)); return dsi; } dsi->dev.of_node = info->node; dsi->channel = info->channel; strlcpy(dsi->name, info->type, sizeof(dsi->name)); ret = mipi_dsi_device_add(dsi); if (ret) { drm_err(host, "failed to add DSI device %d\n", ret); kfree(dsi); return ERR_PTR(ret); } return dsi; } EXPORT_SYMBOL(mipi_dsi_device_register_full); /** * mipi_dsi_device_unregister - unregister MIPI DSI device * @dsi: DSI peripheral device */ void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi) { device_unregister(&dsi->dev); } EXPORT_SYMBOL(mipi_dsi_device_unregister); static void devm_mipi_dsi_device_unregister(void *arg) { struct mipi_dsi_device *dsi = arg; mipi_dsi_device_unregister(dsi); } /** * devm_mipi_dsi_device_register_full - create a managed MIPI DSI device * @dev: device to tie the MIPI-DSI device lifetime to * @host: DSI host to which this device is connected * @info: pointer to template containing DSI device information * * Create a MIPI DSI device by using the device information provided by * mipi_dsi_device_info template * * This is the managed version of mipi_dsi_device_register_full() which * automatically calls mipi_dsi_device_unregister() when @dev is * unbound. * * Returns: * A pointer to the newly created MIPI DSI device, or, a pointer encoded * with an error */ struct mipi_dsi_device * devm_mipi_dsi_device_register_full(struct device *dev, struct mipi_dsi_host *host, const struct mipi_dsi_device_info *info) { struct mipi_dsi_device *dsi; int ret; dsi = mipi_dsi_device_register_full(host, info); if (IS_ERR(dsi)) return dsi; ret = devm_add_action_or_reset(dev, devm_mipi_dsi_device_unregister, dsi); if (ret) return ERR_PTR(ret); return dsi; } EXPORT_SYMBOL_GPL(devm_mipi_dsi_device_register_full); static DEFINE_MUTEX(host_lock); static LIST_HEAD(host_list); /** * of_find_mipi_dsi_host_by_node() - find the MIPI DSI host matching a * device tree node * @node: device tree node * * Returns: * A pointer to the MIPI DSI host corresponding to @node or NULL if no * such device exists (or has not been registered yet). */ struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node) { struct mipi_dsi_host *host; mutex_lock(&host_lock); list_for_each_entry(host, &host_list, list) { if (host->dev->of_node == node) { mutex_unlock(&host_lock); return host; } } mutex_unlock(&host_lock); return NULL; } EXPORT_SYMBOL(of_find_mipi_dsi_host_by_node); int mipi_dsi_host_register(struct mipi_dsi_host *host) { struct device_node *node; for_each_available_child_of_node(host->dev->of_node, node) { /* skip nodes without reg property */ if (!of_find_property(node, "reg", NULL)) continue; of_mipi_dsi_device_add(host, node); } mutex_lock(&host_lock); list_add_tail(&host->list, &host_list); mutex_unlock(&host_lock); return 0; } EXPORT_SYMBOL(mipi_dsi_host_register); static int mipi_dsi_remove_device_fn(struct device *dev, void *priv) { struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev); mipi_dsi_detach(dsi); mipi_dsi_device_unregister(dsi); return 0; } void mipi_dsi_host_unregister(struct mipi_dsi_host *host) { device_for_each_child(host->dev, NULL, mipi_dsi_remove_device_fn); mutex_lock(&host_lock); list_del_init(&host->list); mutex_unlock(&host_lock); } EXPORT_SYMBOL(mipi_dsi_host_unregister); /** * mipi_dsi_attach - attach a DSI device to its DSI host * @dsi: DSI peripheral */ int mipi_dsi_attach(struct mipi_dsi_device *dsi) { const struct mipi_dsi_host_ops *ops = dsi->host->ops; if (!ops || !ops->attach) return -ENOSYS; return ops->attach(dsi->host, dsi); } EXPORT_SYMBOL(mipi_dsi_attach); /** * mipi_dsi_detach - detach a DSI device from its DSI host * @dsi: DSI peripheral */ int mipi_dsi_detach(struct mipi_dsi_device *dsi) { const struct mipi_dsi_host_ops *ops = dsi->host->ops; if (!ops || !ops->detach) return -ENOSYS; return ops->detach(dsi->host, dsi); } EXPORT_SYMBOL(mipi_dsi_detach); static void devm_mipi_dsi_detach(void *arg) { struct mipi_dsi_device *dsi = arg; mipi_dsi_detach(dsi); } /** * devm_mipi_dsi_attach - Attach a MIPI-DSI device to its DSI Host * @dev: device to tie the MIPI-DSI device attachment lifetime to * @dsi: DSI peripheral * * This is the managed version of mipi_dsi_attach() which automatically * calls mipi_dsi_detach() when @dev is unbound. * * Returns: * 0 on success, a negative error code on failure. */ int devm_mipi_dsi_attach(struct device *dev, struct mipi_dsi_device *dsi) { int ret; ret = mipi_dsi_attach(dsi); if (ret) return ret; ret = devm_add_action_or_reset(dev, devm_mipi_dsi_detach, dsi); if (ret) return ret; return 0; } EXPORT_SYMBOL_GPL(devm_mipi_dsi_attach); static ssize_t mipi_dsi_device_transfer(struct mipi_dsi_device *dsi, struct mipi_dsi_msg *msg) { const struct mipi_dsi_host_ops *ops = dsi->host->ops; if (!ops || !ops->transfer) return -ENOSYS; if (dsi->mode_flags & MIPI_DSI_MODE_LPM) msg->flags |= MIPI_DSI_MSG_USE_LPM; return ops->transfer(dsi->host, msg); } /** * mipi_dsi_packet_format_is_short - check if a packet is of the short format * @type: MIPI DSI data type of the packet * * Return: true if the packet for the given data type is a short packet, false * otherwise. */ bool mipi_dsi_packet_format_is_short(u8 type) { switch (type) { case MIPI_DSI_V_SYNC_START: case MIPI_DSI_V_SYNC_END: case MIPI_DSI_H_SYNC_START: case MIPI_DSI_H_SYNC_END: case MIPI_DSI_COMPRESSION_MODE: case MIPI_DSI_END_OF_TRANSMISSION: case MIPI_DSI_COLOR_MODE_OFF: case MIPI_DSI_COLOR_MODE_ON: case MIPI_DSI_SHUTDOWN_PERIPHERAL: case MIPI_DSI_TURN_ON_PERIPHERAL: case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM: case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM: case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM: case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM: case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM: case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: case MIPI_DSI_DCS_SHORT_WRITE: case MIPI_DSI_DCS_SHORT_WRITE_PARAM: case MIPI_DSI_DCS_READ: case MIPI_DSI_EXECUTE_QUEUE: case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: return true; } return false; } EXPORT_SYMBOL(mipi_dsi_packet_format_is_short); /** * mipi_dsi_packet_format_is_long - check if a packet is of the long format * @type: MIPI DSI data type of the packet * * Return: true if the packet for the given data type is a long packet, false * otherwise. */ bool mipi_dsi_packet_format_is_long(u8 type) { switch (type) { case MIPI_DSI_NULL_PACKET: case MIPI_DSI_BLANKING_PACKET: case MIPI_DSI_GENERIC_LONG_WRITE: case MIPI_DSI_DCS_LONG_WRITE: case MIPI_DSI_PICTURE_PARAMETER_SET: case MIPI_DSI_COMPRESSED_PIXEL_STREAM: case MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20: case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24: case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16: case MIPI_DSI_PACKED_PIXEL_STREAM_30: case MIPI_DSI_PACKED_PIXEL_STREAM_36: case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12: case MIPI_DSI_PACKED_PIXEL_STREAM_16: case MIPI_DSI_PACKED_PIXEL_STREAM_18: case MIPI_DSI_PIXEL_STREAM_3BYTE_18: case MIPI_DSI_PACKED_PIXEL_STREAM_24: return true; } return false; } EXPORT_SYMBOL(mipi_dsi_packet_format_is_long); /** * mipi_dsi_create_packet - create a packet from a message according to the * DSI protocol * @packet: pointer to a DSI packet structure * @msg: message to translate into a packet * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, const struct mipi_dsi_msg *msg) { if (!packet || !msg) return -EINVAL; /* do some minimum sanity checking */ if (!mipi_dsi_packet_format_is_short(msg->type) && !mipi_dsi_packet_format_is_long(msg->type)) return -EINVAL; if (msg->channel > 3) return -EINVAL; memset(packet, 0, sizeof(*packet)); packet->header[0] = ((msg->channel & 0x3) << 6) | (msg->type & 0x3f); /* TODO: compute ECC if hardware support is not available */ /* * Long write packets contain the word count in header bytes 1 and 2. * The payload follows the header and is word count bytes long. * * Short write packets encode up to two parameters in header bytes 1 * and 2. */ if (mipi_dsi_packet_format_is_long(msg->type)) { packet->header[1] = (msg->tx_len >> 0) & 0xff; packet->header[2] = (msg->tx_len >> 8) & 0xff; packet->payload_length = msg->tx_len; packet->payload = msg->tx_buf; } else { const u8 *tx = msg->tx_buf; packet->header[1] = (msg->tx_len > 0) ? tx[0] : 0; packet->header[2] = (msg->tx_len > 1) ? tx[1] : 0; } packet->size = sizeof(packet->header) + packet->payload_length; return 0; } EXPORT_SYMBOL(mipi_dsi_create_packet); /** * mipi_dsi_shutdown_peripheral() - sends a Shutdown Peripheral command * @dsi: DSI peripheral device * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi) { struct mipi_dsi_msg msg = { .channel = dsi->channel, .type = MIPI_DSI_SHUTDOWN_PERIPHERAL, .tx_buf = (u8 [2]) { 0, 0 }, .tx_len = 2, }; int ret = mipi_dsi_device_transfer(dsi, &msg); return (ret < 0) ? ret : 0; } EXPORT_SYMBOL(mipi_dsi_shutdown_peripheral); /** * mipi_dsi_turn_on_peripheral() - sends a Turn On Peripheral command * @dsi: DSI peripheral device * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi) { struct mipi_dsi_msg msg = { .channel = dsi->channel, .type = MIPI_DSI_TURN_ON_PERIPHERAL, .tx_buf = (u8 [2]) { 0, 0 }, .tx_len = 2, }; int ret = mipi_dsi_device_transfer(dsi, &msg); return (ret < 0) ? ret : 0; } EXPORT_SYMBOL(mipi_dsi_turn_on_peripheral); /* * mipi_dsi_set_maximum_return_packet_size() - specify the maximum size of the * the payload in a long packet transmitted from the peripheral back to the * host processor * @dsi: DSI peripheral device * @value: the maximum size of the payload * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, u16 value) { u8 tx[2] = { value & 0xff, value >> 8 }; struct mipi_dsi_msg msg = { .channel = dsi->channel, .type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, .tx_len = sizeof(tx), .tx_buf = tx, }; int ret = mipi_dsi_device_transfer(dsi, &msg); return (ret < 0) ? ret : 0; } EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size); /** * mipi_dsi_compression_mode() - enable/disable DSC on the peripheral * @dsi: DSI peripheral device * @enable: Whether to enable or disable the DSC * * Enable or disable Display Stream Compression on the peripheral using the * default Picture Parameter Set and VESA DSC 1.1 algorithm. * * Return: 0 on success or a negative error code on failure. */ ssize_t mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable) { /* Note: Needs updating for non-default PPS or algorithm */ u8 tx[2] = { enable << 0, 0 }; struct mipi_dsi_msg msg = { .channel = dsi->channel, .type = MIPI_DSI_COMPRESSION_MODE, .tx_len = sizeof(tx), .tx_buf = tx, }; int ret = mipi_dsi_device_transfer(dsi, &msg); return (ret < 0) ? ret : 0; } EXPORT_SYMBOL(mipi_dsi_compression_mode); /** * mipi_dsi_picture_parameter_set() - transmit the DSC PPS to the peripheral * @dsi: DSI peripheral device * @pps: VESA DSC 1.1 Picture Parameter Set * * Transmit the VESA DSC 1.1 Picture Parameter Set to the peripheral. * * Return: 0 on success or a negative error code on failure. */ ssize_t mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi, const struct drm_dsc_picture_parameter_set *pps) { struct mipi_dsi_msg msg = { .channel = dsi->channel, .type = MIPI_DSI_PICTURE_PARAMETER_SET, .tx_len = sizeof(*pps), .tx_buf = pps, }; int ret = mipi_dsi_device_transfer(dsi, &msg); return (ret < 0) ? ret : 0; } EXPORT_SYMBOL(mipi_dsi_picture_parameter_set); /** * mipi_dsi_generic_write() - transmit data using a generic write packet * @dsi: DSI peripheral device * @payload: buffer containing the payload * @size: size of payload buffer * * This function will automatically choose the right data type depending on * the payload length. * * Return: The number of bytes transmitted on success or a negative error code * on failure. */ ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, size_t size) { struct mipi_dsi_msg msg = { .channel = dsi->channel, .tx_buf = payload, .tx_len = size }; switch (size) { case 0: msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM; break; case 1: msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM; break; case 2: msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM; break; default: msg.type = MIPI_DSI_GENERIC_LONG_WRITE; break; } return mipi_dsi_device_transfer(dsi, &msg); } EXPORT_SYMBOL(mipi_dsi_generic_write); /** * mipi_dsi_generic_read() - receive data using a generic read packet * @dsi: DSI peripheral device * @params: buffer containing the request parameters * @num_params: number of request parameters * @data: buffer in which to return the received data * @size: size of receive buffer * * This function will automatically choose the right data type depending on * the number of parameters passed in. * * Return: The number of bytes successfully read or a negative error code on * failure. */ ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, size_t num_params, void *data, size_t size) { struct mipi_dsi_msg msg = { .channel = dsi->channel, .tx_len = num_params, .tx_buf = params, .rx_len = size, .rx_buf = data }; switch (num_params) { case 0: msg.type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM; break; case 1: msg.type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM; break; case 2: msg.type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM; break; default: return -EINVAL; } return mipi_dsi_device_transfer(dsi, &msg); } EXPORT_SYMBOL(mipi_dsi_generic_read); /** * mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload * @dsi: DSI peripheral device * @data: buffer containing data to be transmitted * @len: size of transmission buffer * * This function will automatically choose the right data type depending on * the command payload length. * * Return: The number of bytes successfully transmitted or a negative error * code on failure. */ ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, const void *data, size_t len) { struct mipi_dsi_msg msg = { .channel = dsi->channel, .tx_buf = data, .tx_len = len }; switch (len) { case 0: return -EINVAL; case 1: msg.type = MIPI_DSI_DCS_SHORT_WRITE; break; case 2: msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM; break; default: msg.type = MIPI_DSI_DCS_LONG_WRITE; break; } return mipi_dsi_device_transfer(dsi, &msg); } EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer); /** * mipi_dsi_dcs_write() - send DCS write command * @dsi: DSI peripheral device * @cmd: DCS command * @data: buffer containing the command payload * @len: command payload length * * This function will automatically choose the right data type depending on * the command payload length. * * Return: The number of bytes successfully transmitted or a negative error * code on failure. */ ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, const void *data, size_t len) { ssize_t err; size_t size; u8 stack_tx[8]; u8 *tx; size = 1 + len; if (len > ARRAY_SIZE(stack_tx) - 1) { tx = kmalloc(size, GFP_KERNEL); if (!tx) return -ENOMEM; } else { tx = stack_tx; } /* concatenate the DCS command byte and the payload */ tx[0] = cmd; if (data) memcpy(&tx[1], data, len); err = mipi_dsi_dcs_write_buffer(dsi, tx, size); if (tx != stack_tx) kfree(tx); return err; } EXPORT_SYMBOL(mipi_dsi_dcs_write); /** * mipi_dsi_dcs_read() - send DCS read request command * @dsi: DSI peripheral device * @cmd: DCS command * @data: buffer in which to receive data * @len: size of receive buffer * * Return: The number of bytes read or a negative error code on failure. */ ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, size_t len) { struct mipi_dsi_msg msg = { .channel = dsi->channel, .type = MIPI_DSI_DCS_READ, .tx_buf = &cmd, .tx_len = 1, .rx_buf = data, .rx_len = len }; return mipi_dsi_device_transfer(dsi, &msg); } EXPORT_SYMBOL(mipi_dsi_dcs_read); /** * mipi_dsi_dcs_nop() - send DCS nop packet * @dsi: DSI peripheral device * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi) { ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_NOP, NULL, 0); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_nop); /** * mipi_dsi_dcs_soft_reset() - perform a software reset of the display module * @dsi: DSI peripheral device * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi) { ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SOFT_RESET, NULL, 0); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_soft_reset); /** * mipi_dsi_dcs_get_power_mode() - query the display module's current power * mode * @dsi: DSI peripheral device * @mode: return location for the current power mode * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode) { ssize_t err; err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_POWER_MODE, mode, sizeof(*mode)); if (err <= 0) { if (err == 0) err = -ENODATA; return err; } return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_get_power_mode); /** * mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image * data used by the interface * @dsi: DSI peripheral device * @format: return location for the pixel format * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format) { ssize_t err; err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_PIXEL_FORMAT, format, sizeof(*format)); if (err <= 0) { if (err == 0) err = -ENODATA; return err; } return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_get_pixel_format); /** * mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the * display module except interface communication * @dsi: DSI peripheral device * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi) { ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_enter_sleep_mode); /** * mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display * module * @dsi: DSI peripheral device * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi) { ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_exit_sleep_mode); /** * mipi_dsi_dcs_set_display_off() - stop displaying the image data on the * display device * @dsi: DSI peripheral device * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi) { ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_set_display_off); /** * mipi_dsi_dcs_set_display_on() - start displaying the image data on the * display device * @dsi: DSI peripheral device * * Return: 0 on success or a negative error code on failure */ int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi) { ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_set_display_on); /** * mipi_dsi_dcs_set_column_address() - define the column extent of the frame * memory accessed by the host processor * @dsi: DSI peripheral device * @start: first column of frame memory * @end: last column of frame memory * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, u16 end) { u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff }; ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, payload, sizeof(payload)); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_set_column_address); /** * mipi_dsi_dcs_set_page_address() - define the page extent of the frame * memory accessed by the host processor * @dsi: DSI peripheral device * @start: first page of frame memory * @end: last page of frame memory * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, u16 end) { u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff }; ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PAGE_ADDRESS, payload, sizeof(payload)); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_set_page_address); /** * mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect * output signal on the TE signal line * @dsi: DSI peripheral device * * Return: 0 on success or a negative error code on failure */ int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi) { ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_OFF, NULL, 0); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_off); /** * mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect * output signal on the TE signal line. * @dsi: DSI peripheral device * @mode: the Tearing Effect Output Line mode * * Return: 0 on success or a negative error code on failure */ int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, enum mipi_dsi_dcs_tear_mode mode) { u8 value = mode; ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_ON, &value, sizeof(value)); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on); /** * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image * data used by the interface * @dsi: DSI peripheral device * @format: pixel format * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format) { ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format, sizeof(format)); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format); /** * mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for * the Tearing Effect output signal of the display module * @dsi: DSI peripheral device * @scanline: scanline to use as trigger * * Return: 0 on success or a negative error code on failure */ int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline) { u8 payload[2] = { scanline >> 8, scanline & 0xff }; ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_SCANLINE, payload, sizeof(payload)); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline); /** * mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the * display * @dsi: DSI peripheral device * @brightness: brightness value * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi, u16 brightness) { u8 payload[2] = { brightness & 0xff, brightness >> 8 }; ssize_t err; err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, payload, sizeof(payload)); if (err < 0) return err; return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness); /** * mipi_dsi_dcs_get_display_brightness() - gets the current brightness value * of the display * @dsi: DSI peripheral device * @brightness: brightness value * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi, u16 *brightness) { ssize_t err; err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS, brightness, sizeof(*brightness)); if (err <= 0) { if (err == 0) err = -ENODATA; return err; } return 0; } EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness); static int mipi_dsi_drv_probe(struct device *dev) { struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver); struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev); return drv->probe(dsi); } static int mipi_dsi_drv_remove(struct device *dev) { struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver); struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev); drv->remove(dsi); return 0; } static void mipi_dsi_drv_shutdown(struct device *dev) { struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver); struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev); drv->shutdown(dsi); } /** * mipi_dsi_driver_register_full() - register a driver for DSI devices * @drv: DSI driver structure * @owner: owner module * * Return: 0 on success or a negative error code on failure. */ int mipi_dsi_driver_register_full(struct mipi_dsi_driver *drv, struct module *owner) { drv->driver.bus = &mipi_dsi_bus_type; drv->driver.owner = owner; if (drv->probe) drv->driver.probe = mipi_dsi_drv_probe; if (drv->remove) drv->driver.remove = mipi_dsi_drv_remove; if (drv->shutdown) drv->driver.shutdown = mipi_dsi_drv_shutdown; return driver_register(&drv->driver); } EXPORT_SYMBOL(mipi_dsi_driver_register_full); /** * mipi_dsi_driver_unregister() - unregister a driver for DSI devices * @drv: DSI driver structure * * Return: 0 on success or a negative error code on failure. */ void mipi_dsi_driver_unregister(struct mipi_dsi_driver *drv) { driver_unregister(&drv->driver); } EXPORT_SYMBOL(mipi_dsi_driver_unregister); static int __init mipi_dsi_bus_init(void) { return bus_register(&mipi_dsi_bus_type); } postcore_initcall(mipi_dsi_bus_init); MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>"); MODULE_DESCRIPTION("MIPI DSI Bus"); MODULE_LICENSE("GPL and additional rights");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1