Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Daniel Vetter | 1738 | 84.29% | 11 | 37.93% |
Dave Stevenson | 106 | 5.14% | 1 | 3.45% |
Keith Packard | 71 | 3.44% | 3 | 10.34% |
Maarten Lankhorst | 69 | 3.35% | 1 | 3.45% |
Michal Orzel | 30 | 1.45% | 1 | 3.45% |
Sam Ravnborg | 14 | 0.68% | 1 | 3.45% |
Thierry Reding | 12 | 0.58% | 2 | 6.90% |
Chris Wilson | 10 | 0.48% | 2 | 6.90% |
Shayenne da Luz Moura | 4 | 0.19% | 1 | 3.45% |
Peter Zijlstra | 2 | 0.10% | 1 | 3.45% |
Dhinakaran Pandiyan | 2 | 0.10% | 1 | 3.45% |
Mauro Carvalho Chehab | 1 | 0.05% | 1 | 3.45% |
Dave Airlie | 1 | 0.05% | 1 | 3.45% |
Ville Syrjälä | 1 | 0.05% | 1 | 3.45% |
caihuoqing | 1 | 0.05% | 1 | 3.45% |
Total | 2062 | 29 |
/* * Copyright (c) 2016 Intel Corporation * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that copyright * notice and this permission notice appear in supporting documentation, and * that the name of the copyright holders not be used in advertising or * publicity pertaining to distribution of the software without specific, * written prior permission. The copyright holders make no representations * about the suitability of this software for any purpose. It is provided "as * is" without express or implied warranty. * * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE * OF THIS SOFTWARE. */ #include <linux/export.h> #include <linux/uaccess.h> #include <drm/drm_atomic.h> #include <drm/drm_drv.h> #include <drm/drm_device.h> #include <drm/drm_file.h> #include <drm/drm_mode_object.h> #include <drm/drm_print.h> #include "drm_crtc_internal.h" /* * Internal function to assign a slot in the object idr and optionally * register the object into the idr. */ int __drm_mode_object_add(struct drm_device *dev, struct drm_mode_object *obj, uint32_t obj_type, bool register_obj, void (*obj_free_cb)(struct kref *kref)) { int ret; WARN_ON(!dev->driver->load && dev->registered && !obj_free_cb); mutex_lock(&dev->mode_config.idr_mutex); ret = idr_alloc(&dev->mode_config.object_idr, register_obj ? obj : NULL, 1, 0, GFP_KERNEL); if (ret >= 0) { /* * Set up the object linking under the protection of the idr * lock so that other users can't see inconsistent state. */ obj->id = ret; obj->type = obj_type; if (obj_free_cb) { obj->free_cb = obj_free_cb; kref_init(&obj->refcount); } } mutex_unlock(&dev->mode_config.idr_mutex); return ret < 0 ? ret : 0; } /** * drm_mode_object_add - allocate a new modeset identifier * @dev: DRM device * @obj: object pointer, used to generate unique ID * @obj_type: object type * * Create a unique identifier based on @ptr in @dev's identifier space. Used * for tracking modes, CRTCs and connectors. * * Returns: * Zero on success, error code on failure. */ int drm_mode_object_add(struct drm_device *dev, struct drm_mode_object *obj, uint32_t obj_type) { return __drm_mode_object_add(dev, obj, obj_type, true, NULL); } void drm_mode_object_register(struct drm_device *dev, struct drm_mode_object *obj) { mutex_lock(&dev->mode_config.idr_mutex); idr_replace(&dev->mode_config.object_idr, obj, obj->id); mutex_unlock(&dev->mode_config.idr_mutex); } /** * drm_mode_object_unregister - free a modeset identifier * @dev: DRM device * @object: object to free * * Free @id from @dev's unique identifier pool. * This function can be called multiple times, and guards against * multiple removals. * These modeset identifiers are _not_ reference counted. Hence don't use this * for reference counted modeset objects like framebuffers. */ void drm_mode_object_unregister(struct drm_device *dev, struct drm_mode_object *object) { WARN_ON(!dev->driver->load && dev->registered && !object->free_cb); mutex_lock(&dev->mode_config.idr_mutex); if (object->id) { idr_remove(&dev->mode_config.object_idr, object->id); object->id = 0; } mutex_unlock(&dev->mode_config.idr_mutex); } /** * drm_mode_object_lease_required - check types which must be leased to be used * @type: type of object * * Returns whether the provided type of drm_mode_object must * be owned or leased to be used by a process. */ bool drm_mode_object_lease_required(uint32_t type) { switch(type) { case DRM_MODE_OBJECT_CRTC: case DRM_MODE_OBJECT_CONNECTOR: case DRM_MODE_OBJECT_PLANE: return true; default: return false; } } struct drm_mode_object *__drm_mode_object_find(struct drm_device *dev, struct drm_file *file_priv, uint32_t id, uint32_t type) { struct drm_mode_object *obj = NULL; mutex_lock(&dev->mode_config.idr_mutex); obj = idr_find(&dev->mode_config.object_idr, id); if (obj && type != DRM_MODE_OBJECT_ANY && obj->type != type) obj = NULL; if (obj && obj->id != id) obj = NULL; if (obj && drm_mode_object_lease_required(obj->type) && !_drm_lease_held(file_priv, obj->id)) obj = NULL; if (obj && obj->free_cb) { if (!kref_get_unless_zero(&obj->refcount)) obj = NULL; } mutex_unlock(&dev->mode_config.idr_mutex); return obj; } /** * drm_mode_object_find - look up a drm object with static lifetime * @dev: drm device * @file_priv: drm file * @id: id of the mode object * @type: type of the mode object * * This function is used to look up a modeset object. It will acquire a * reference for reference counted objects. This reference must be dropped again * by callind drm_mode_object_put(). */ struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, struct drm_file *file_priv, uint32_t id, uint32_t type) { struct drm_mode_object *obj = NULL; obj = __drm_mode_object_find(dev, file_priv, id, type); return obj; } EXPORT_SYMBOL(drm_mode_object_find); /** * drm_mode_object_put - release a mode object reference * @obj: DRM mode object * * This function decrements the object's refcount if it is a refcounted modeset * object. It is a no-op on any other object. This is used to drop references * acquired with drm_mode_object_get(). */ void drm_mode_object_put(struct drm_mode_object *obj) { if (obj->free_cb) { DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, kref_read(&obj->refcount)); kref_put(&obj->refcount, obj->free_cb); } } EXPORT_SYMBOL(drm_mode_object_put); /** * drm_mode_object_get - acquire a mode object reference * @obj: DRM mode object * * This function increments the object's refcount if it is a refcounted modeset * object. It is a no-op on any other object. References should be dropped again * by calling drm_mode_object_put(). */ void drm_mode_object_get(struct drm_mode_object *obj) { if (obj->free_cb) { DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, kref_read(&obj->refcount)); kref_get(&obj->refcount); } } EXPORT_SYMBOL(drm_mode_object_get); /** * drm_object_attach_property - attach a property to a modeset object * @obj: drm modeset object * @property: property to attach * @init_val: initial value of the property * * This attaches the given property to the modeset object with the given initial * value. Currently this function cannot fail since the properties are stored in * a statically sized array. * * Note that all properties must be attached before the object itself is * registered and accessible from userspace. */ void drm_object_attach_property(struct drm_mode_object *obj, struct drm_property *property, uint64_t init_val) { int count = obj->properties->count; struct drm_device *dev = property->dev; if (obj->type == DRM_MODE_OBJECT_CONNECTOR) { struct drm_connector *connector = obj_to_connector(obj); WARN_ON(!dev->driver->load && connector->registration_state == DRM_CONNECTOR_REGISTERED); } else { WARN_ON(!dev->driver->load && dev->registered); } if (count == DRM_OBJECT_MAX_PROPERTY) { WARN(1, "Failed to attach object property (type: 0x%x). Please " "increase DRM_OBJECT_MAX_PROPERTY by 1 for each time " "you see this message on the same object type.\n", obj->type); return; } obj->properties->properties[count] = property; obj->properties->values[count] = init_val; obj->properties->count++; } EXPORT_SYMBOL(drm_object_attach_property); /** * drm_object_property_set_value - set the value of a property * @obj: drm mode object to set property value for * @property: property to set * @val: value the property should be set to * * This function sets a given property on a given object. This function only * changes the software state of the property, it does not call into the * driver's ->set_property callback. * * Note that atomic drivers should not have any need to call this, the core will * ensure consistency of values reported back to userspace through the * appropriate ->atomic_get_property callback. Only legacy drivers should call * this function to update the tracked value (after clamping and other * restrictions have been applied). * * Returns: * Zero on success, error code on failure. */ int drm_object_property_set_value(struct drm_mode_object *obj, struct drm_property *property, uint64_t val) { int i; WARN_ON(drm_drv_uses_atomic_modeset(property->dev) && !(property->flags & DRM_MODE_PROP_IMMUTABLE)); for (i = 0; i < obj->properties->count; i++) { if (obj->properties->properties[i] == property) { obj->properties->values[i] = val; return 0; } } return -EINVAL; } EXPORT_SYMBOL(drm_object_property_set_value); static int __drm_object_property_get_prop_value(struct drm_mode_object *obj, struct drm_property *property, uint64_t *val) { int i; for (i = 0; i < obj->properties->count; i++) { if (obj->properties->properties[i] == property) { *val = obj->properties->values[i]; return 0; } } return -EINVAL; } static int __drm_object_property_get_value(struct drm_mode_object *obj, struct drm_property *property, uint64_t *val) { /* read-only properties bypass atomic mechanism and still store * their value in obj->properties->values[].. mostly to avoid * having to deal w/ EDID and similar props in atomic paths: */ if (drm_drv_uses_atomic_modeset(property->dev) && !(property->flags & DRM_MODE_PROP_IMMUTABLE)) return drm_atomic_get_property(obj, property, val); return __drm_object_property_get_prop_value(obj, property, val); } /** * drm_object_property_get_value - retrieve the value of a property * @obj: drm mode object to get property value from * @property: property to retrieve * @val: storage for the property value * * This function retrieves the softare state of the given property for the given * property. Since there is no driver callback to retrieve the current property * value this might be out of sync with the hardware, depending upon the driver * and property. * * Atomic drivers should never call this function directly, the core will read * out property values through the various ->atomic_get_property callbacks. * * Returns: * Zero on success, error code on failure. */ int drm_object_property_get_value(struct drm_mode_object *obj, struct drm_property *property, uint64_t *val) { WARN_ON(drm_drv_uses_atomic_modeset(property->dev)); return __drm_object_property_get_value(obj, property, val); } EXPORT_SYMBOL(drm_object_property_get_value); /** * drm_object_property_get_default_value - retrieve the default value of a * property when in atomic mode. * @obj: drm mode object to get property value from * @property: property to retrieve * @val: storage for the property value * * This function retrieves the default state of the given property as passed in * to drm_object_attach_property * * Only atomic drivers should call this function directly, as for non-atomic * drivers it will return the current value. * * Returns: * Zero on success, error code on failure. */ int drm_object_property_get_default_value(struct drm_mode_object *obj, struct drm_property *property, uint64_t *val) { WARN_ON(!drm_drv_uses_atomic_modeset(property->dev)); return __drm_object_property_get_prop_value(obj, property, val); } EXPORT_SYMBOL(drm_object_property_get_default_value); /* helper for getconnector and getproperties ioctls */ int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic, uint32_t __user *prop_ptr, uint64_t __user *prop_values, uint32_t *arg_count_props) { int i, ret, count; for (i = 0, count = 0; i < obj->properties->count; i++) { struct drm_property *prop = obj->properties->properties[i]; uint64_t val; if ((prop->flags & DRM_MODE_PROP_ATOMIC) && !atomic) continue; if (*arg_count_props > count) { ret = __drm_object_property_get_value(obj, prop, &val); if (ret) return ret; if (put_user(prop->base.id, prop_ptr + count)) return -EFAULT; if (put_user(val, prop_values + count)) return -EFAULT; } count++; } *arg_count_props = count; return 0; } /** * drm_mode_obj_get_properties_ioctl - get the current value of a object's property * @dev: DRM device * @data: ioctl data * @file_priv: DRM file info * * This function retrieves the current value for an object's property. Compared * to the connector specific ioctl this one is extended to also work on crtc and * plane objects. * * Called by the user via ioctl. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_obj_get_properties *arg = data; struct drm_mode_object *obj; struct drm_modeset_acquire_ctx ctx; int ret = 0; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, ret); obj = drm_mode_object_find(dev, file_priv, arg->obj_id, arg->obj_type); if (!obj) { ret = -ENOENT; goto out; } if (!obj->properties) { ret = -EINVAL; goto out_unref; } ret = drm_mode_object_get_properties(obj, file_priv->atomic, (uint32_t __user *)(unsigned long)(arg->props_ptr), (uint64_t __user *)(unsigned long)(arg->prop_values_ptr), &arg->count_props); out_unref: drm_mode_object_put(obj); out: DRM_MODESET_LOCK_ALL_END(dev, ctx, ret); return ret; } struct drm_property *drm_mode_obj_find_prop_id(struct drm_mode_object *obj, uint32_t prop_id) { int i; for (i = 0; i < obj->properties->count; i++) if (obj->properties->properties[i]->base.id == prop_id) return obj->properties->properties[i]; return NULL; } static int set_property_legacy(struct drm_mode_object *obj, struct drm_property *prop, uint64_t prop_value) { struct drm_device *dev = prop->dev; struct drm_mode_object *ref; struct drm_modeset_acquire_ctx ctx; int ret = -EINVAL; if (!drm_property_change_valid_get(prop, prop_value, &ref)) return -EINVAL; DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, ret); switch (obj->type) { case DRM_MODE_OBJECT_CONNECTOR: ret = drm_connector_set_obj_prop(obj, prop, prop_value); break; case DRM_MODE_OBJECT_CRTC: ret = drm_mode_crtc_set_obj_prop(obj, prop, prop_value); break; case DRM_MODE_OBJECT_PLANE: ret = drm_mode_plane_set_obj_prop(obj_to_plane(obj), prop, prop_value); break; } drm_property_change_valid_put(prop, ref); DRM_MODESET_LOCK_ALL_END(dev, ctx, ret); return ret; } static int set_property_atomic(struct drm_mode_object *obj, struct drm_file *file_priv, struct drm_property *prop, uint64_t prop_value) { struct drm_device *dev = prop->dev; struct drm_atomic_state *state; struct drm_modeset_acquire_ctx ctx; int ret; state = drm_atomic_state_alloc(dev); if (!state) return -ENOMEM; drm_modeset_acquire_init(&ctx, 0); state->acquire_ctx = &ctx; retry: if (prop == state->dev->mode_config.dpms_property) { if (obj->type != DRM_MODE_OBJECT_CONNECTOR) { ret = -EINVAL; goto out; } ret = drm_atomic_connector_commit_dpms(state, obj_to_connector(obj), prop_value); } else { ret = drm_atomic_set_property(state, file_priv, obj, prop, prop_value); if (ret) goto out; ret = drm_atomic_commit(state); } out: if (ret == -EDEADLK) { drm_atomic_state_clear(state); drm_modeset_backoff(&ctx); goto retry; } drm_atomic_state_put(state); drm_modeset_drop_locks(&ctx); drm_modeset_acquire_fini(&ctx); return ret; } int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_obj_set_property *arg = data; struct drm_mode_object *arg_obj; struct drm_property *property; int ret = -EINVAL; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; arg_obj = drm_mode_object_find(dev, file_priv, arg->obj_id, arg->obj_type); if (!arg_obj) return -ENOENT; if (!arg_obj->properties) goto out_unref; property = drm_mode_obj_find_prop_id(arg_obj, arg->prop_id); if (!property) goto out_unref; if (drm_drv_uses_atomic_modeset(property->dev)) ret = set_property_atomic(arg_obj, file_priv, property, arg->value); else ret = set_property_legacy(arg_obj, property, arg->value); out_unref: drm_mode_object_put(arg_obj); return ret; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1