Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Andreas Klinger | 1231 | 98.56% | 1 | 20.00% |
Alexandru Ardelean | 13 | 1.04% | 1 | 20.00% |
Andy Shevchenko | 3 | 0.24% | 1 | 20.00% |
Julia Lawall | 1 | 0.08% | 1 | 20.00% |
Yue haibing | 1 | 0.08% | 1 | 20.00% |
Total | 1249 | 5 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * PING: ultrasonic sensor for distance measuring by using only one GPIOs * * Copyright (c) 2019 Andreas Klinger <ak@it-klinger.de> * * For details about the devices see: * http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf * http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf * * the measurement cycle as timing diagram looks like: * * GPIO ___ ________________________ * ping: __/ \____________/ \________________ * ^ ^ ^ ^ * |<->| interrupt interrupt * udelay(5) (ts_rising) (ts_falling) * |<---------------------->| * . pulse time measured . * . --> one round trip of ultra sonic waves * ultra . . * sonic _ _ _. . * burst: _________/ \_/ \_/ \_________________________________________ * . * ultra . * sonic _ _ _. * echo: __________________________________/ \_/ \_/ \________________ */ #include <linux/err.h> #include <linux/gpio/consumer.h> #include <linux/kernel.h> #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/property.h> #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> struct ping_cfg { unsigned long trigger_pulse_us; /* length of trigger pulse */ int laserping_error; /* support error code in */ /* pulse width of laser */ /* ping sensors */ s64 timeout_ns; /* timeout in ns */ }; struct ping_data { struct device *dev; struct gpio_desc *gpiod_ping; struct mutex lock; int irqnr; ktime_t ts_rising; ktime_t ts_falling; struct completion rising; struct completion falling; const struct ping_cfg *cfg; }; static const struct ping_cfg pa_ping_cfg = { .trigger_pulse_us = 5, .laserping_error = 0, .timeout_ns = 18500000, /* 3 meters */ }; static const struct ping_cfg pa_laser_ping_cfg = { .trigger_pulse_us = 5, .laserping_error = 1, .timeout_ns = 15500000, /* 2 meters plus error codes */ }; static irqreturn_t ping_handle_irq(int irq, void *dev_id) { struct iio_dev *indio_dev = dev_id; struct ping_data *data = iio_priv(indio_dev); ktime_t now = ktime_get(); if (gpiod_get_value(data->gpiod_ping)) { data->ts_rising = now; complete(&data->rising); } else { data->ts_falling = now; complete(&data->falling); } return IRQ_HANDLED; } static int ping_read(struct iio_dev *indio_dev) { struct ping_data *data = iio_priv(indio_dev); int ret; ktime_t ktime_dt; s64 dt_ns; u32 time_ns, distance_mm; struct platform_device *pdev = to_platform_device(data->dev); /* * just one read-echo-cycle can take place at a time * ==> lock against concurrent reading calls */ mutex_lock(&data->lock); reinit_completion(&data->rising); reinit_completion(&data->falling); gpiod_set_value(data->gpiod_ping, 1); udelay(data->cfg->trigger_pulse_us); gpiod_set_value(data->gpiod_ping, 0); ret = gpiod_direction_input(data->gpiod_ping); if (ret < 0) { mutex_unlock(&data->lock); return ret; } data->irqnr = gpiod_to_irq(data->gpiod_ping); if (data->irqnr < 0) { dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr); mutex_unlock(&data->lock); return data->irqnr; } ret = request_irq(data->irqnr, ping_handle_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, pdev->name, indio_dev); if (ret < 0) { dev_err(data->dev, "request_irq: %d\n", ret); mutex_unlock(&data->lock); return ret; } /* it should not take more than 20 ms until echo is rising */ ret = wait_for_completion_killable_timeout(&data->rising, HZ/50); if (ret < 0) goto err_reset_direction; else if (ret == 0) { ret = -ETIMEDOUT; goto err_reset_direction; } /* it cannot take more than 50 ms until echo is falling */ ret = wait_for_completion_killable_timeout(&data->falling, HZ/20); if (ret < 0) goto err_reset_direction; else if (ret == 0) { ret = -ETIMEDOUT; goto err_reset_direction; } ktime_dt = ktime_sub(data->ts_falling, data->ts_rising); free_irq(data->irqnr, indio_dev); ret = gpiod_direction_output(data->gpiod_ping, GPIOD_OUT_LOW); if (ret < 0) { mutex_unlock(&data->lock); return ret; } mutex_unlock(&data->lock); dt_ns = ktime_to_ns(ktime_dt); if (dt_ns > data->cfg->timeout_ns) { dev_dbg(data->dev, "distance out of range: dt=%lldns\n", dt_ns); return -EIO; } time_ns = dt_ns; /* * read error code of laser ping sensor and give users chance to * figure out error by using dynamic debugging */ if (data->cfg->laserping_error) { if ((time_ns > 12500000) && (time_ns <= 13500000)) { dev_dbg(data->dev, "target too close or to far\n"); return -EIO; } if ((time_ns > 13500000) && (time_ns <= 14500000)) { dev_dbg(data->dev, "internal sensor error\n"); return -EIO; } if ((time_ns > 14500000) && (time_ns <= 15500000)) { dev_dbg(data->dev, "internal sensor timeout\n"); return -EIO; } } /* * the speed as function of the temperature is approximately: * * speed = 331,5 + 0,6 * Temp * with Temp in °C * and speed in m/s * * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the * temperature * * therefore: * time 343,5 time * 232 * distance = ------ * ------- = ------------ * 10^6 2 1350800 * with time in ns * and distance in mm (one way) * * because we limit to 3 meters the multiplication with 232 just * fits into 32 bit */ distance_mm = time_ns * 232 / 1350800; return distance_mm; err_reset_direction: free_irq(data->irqnr, indio_dev); mutex_unlock(&data->lock); if (gpiod_direction_output(data->gpiod_ping, GPIOD_OUT_LOW)) dev_dbg(data->dev, "error in gpiod_direction_output\n"); return ret; } static int ping_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *channel, int *val, int *val2, long info) { int ret; if (channel->type != IIO_DISTANCE) return -EINVAL; switch (info) { case IIO_CHAN_INFO_RAW: ret = ping_read(indio_dev); if (ret < 0) return ret; *val = ret; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: /* * maximum resolution in datasheet is 1 mm * 1 LSB is 1 mm */ *val = 0; *val2 = 1000; return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } } static const struct iio_info ping_iio_info = { .read_raw = ping_read_raw, }; static const struct iio_chan_spec ping_chan_spec[] = { { .type = IIO_DISTANCE, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), }, }; static const struct of_device_id of_ping_match[] = { { .compatible = "parallax,ping", .data = &pa_ping_cfg }, { .compatible = "parallax,laserping", .data = &pa_laser_ping_cfg }, {}, }; MODULE_DEVICE_TABLE(of, of_ping_match); static int ping_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ping_data *data; struct iio_dev *indio_dev; indio_dev = devm_iio_device_alloc(dev, sizeof(struct ping_data)); if (!indio_dev) { dev_err(dev, "failed to allocate IIO device\n"); return -ENOMEM; } data = iio_priv(indio_dev); data->dev = dev; data->cfg = device_get_match_data(dev); mutex_init(&data->lock); init_completion(&data->rising); init_completion(&data->falling); data->gpiod_ping = devm_gpiod_get(dev, "ping", GPIOD_OUT_LOW); if (IS_ERR(data->gpiod_ping)) { dev_err(dev, "failed to get ping-gpios: err=%ld\n", PTR_ERR(data->gpiod_ping)); return PTR_ERR(data->gpiod_ping); } if (gpiod_cansleep(data->gpiod_ping)) { dev_err(data->dev, "cansleep-GPIOs not supported\n"); return -ENODEV; } platform_set_drvdata(pdev, indio_dev); indio_dev->name = "ping"; indio_dev->info = &ping_iio_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = ping_chan_spec; indio_dev->num_channels = ARRAY_SIZE(ping_chan_spec); return devm_iio_device_register(dev, indio_dev); } static struct platform_driver ping_driver = { .probe = ping_probe, .driver = { .name = "ping-gpio", .of_match_table = of_ping_match, }, }; module_platform_driver(ping_driver); MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>"); MODULE_DESCRIPTION("PING sensors for distance measuring using one GPIOs"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:ping");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1