Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Bo Shen | 1115 | 95.63% | 2 | 25.00% |
Javier Martinez Canillas | 38 | 3.26% | 1 | 12.50% |
Axel Lin | 8 | 0.69% | 2 | 25.00% |
Lars-Peter Clausen | 2 | 0.17% | 1 | 12.50% |
Thomas Gleixner | 2 | 0.17% | 1 | 12.50% |
Uwe Kleine-König | 1 | 0.09% | 1 | 12.50% |
Total | 1166 | 8 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Atmel AT42QT1070 QTouch Sensor Controller * * Copyright (C) 2011 Atmel * * Authors: Bo Shen <voice.shen@atmel.com> * * Base on AT42QT2160 driver by: * Raphael Derosso Pereira <raphaelpereira@gmail.com> * Copyright (C) 2009 */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/slab.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/jiffies.h> #include <linux/delay.h> /* Address for each register */ #define CHIP_ID 0x00 #define QT1070_CHIP_ID 0x2E #define FW_VERSION 0x01 #define QT1070_FW_VERSION 0x15 #define DET_STATUS 0x02 #define KEY_STATUS 0x03 /* Calibrate */ #define CALIBRATE_CMD 0x38 #define QT1070_CAL_TIME 200 /* Reset */ #define RESET 0x39 #define QT1070_RESET_TIME 255 /* AT42QT1070 support up to 7 keys */ static const unsigned short qt1070_key2code[] = { KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, }; struct qt1070_data { struct i2c_client *client; struct input_dev *input; unsigned int irq; unsigned short keycodes[ARRAY_SIZE(qt1070_key2code)]; u8 last_keys; }; static int qt1070_read(struct i2c_client *client, u8 reg) { int ret; ret = i2c_smbus_read_byte_data(client, reg); if (ret < 0) dev_err(&client->dev, "can not read register, returned %d\n", ret); return ret; } static int qt1070_write(struct i2c_client *client, u8 reg, u8 data) { int ret; ret = i2c_smbus_write_byte_data(client, reg, data); if (ret < 0) dev_err(&client->dev, "can not write register, returned %d\n", ret); return ret; } static bool qt1070_identify(struct i2c_client *client) { int id, ver; /* Read Chip ID */ id = qt1070_read(client, CHIP_ID); if (id != QT1070_CHIP_ID) { dev_err(&client->dev, "ID %d not supported\n", id); return false; } /* Read firmware version */ ver = qt1070_read(client, FW_VERSION); if (ver < 0) { dev_err(&client->dev, "could not read the firmware version\n"); return false; } dev_info(&client->dev, "AT42QT1070 firmware version %x\n", ver); return true; } static irqreturn_t qt1070_interrupt(int irq, void *dev_id) { struct qt1070_data *data = dev_id; struct i2c_client *client = data->client; struct input_dev *input = data->input; int i; u8 new_keys, keyval, mask = 0x01; /* Read the detected status register, thus clearing interrupt */ qt1070_read(client, DET_STATUS); /* Read which key changed */ new_keys = qt1070_read(client, KEY_STATUS); for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) { keyval = new_keys & mask; if ((data->last_keys & mask) != keyval) input_report_key(input, data->keycodes[i], keyval); mask <<= 1; } input_sync(input); data->last_keys = new_keys; return IRQ_HANDLED; } static int qt1070_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct qt1070_data *data; struct input_dev *input; int i; int err; err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE); if (!err) { dev_err(&client->dev, "%s adapter not supported\n", dev_driver_string(&client->adapter->dev)); return -ENODEV; } if (!client->irq) { dev_err(&client->dev, "please assign the irq to this device\n"); return -EINVAL; } /* Identify the qt1070 chip */ if (!qt1070_identify(client)) return -ENODEV; data = kzalloc(sizeof(struct qt1070_data), GFP_KERNEL); input = input_allocate_device(); if (!data || !input) { dev_err(&client->dev, "insufficient memory\n"); err = -ENOMEM; goto err_free_mem; } data->client = client; data->input = input; data->irq = client->irq; input->name = "AT42QT1070 QTouch Sensor"; input->dev.parent = &client->dev; input->id.bustype = BUS_I2C; /* Add the keycode */ input->keycode = data->keycodes; input->keycodesize = sizeof(data->keycodes[0]); input->keycodemax = ARRAY_SIZE(qt1070_key2code); __set_bit(EV_KEY, input->evbit); for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) { data->keycodes[i] = qt1070_key2code[i]; __set_bit(qt1070_key2code[i], input->keybit); } /* Calibrate device */ qt1070_write(client, CALIBRATE_CMD, 1); msleep(QT1070_CAL_TIME); /* Soft reset */ qt1070_write(client, RESET, 1); msleep(QT1070_RESET_TIME); err = request_threaded_irq(client->irq, NULL, qt1070_interrupt, IRQF_TRIGGER_NONE | IRQF_ONESHOT, client->dev.driver->name, data); if (err) { dev_err(&client->dev, "fail to request irq\n"); goto err_free_mem; } /* Register the input device */ err = input_register_device(data->input); if (err) { dev_err(&client->dev, "Failed to register input device\n"); goto err_free_irq; } i2c_set_clientdata(client, data); /* Read to clear the chang line */ qt1070_read(client, DET_STATUS); return 0; err_free_irq: free_irq(client->irq, data); err_free_mem: input_free_device(input); kfree(data); return err; } static void qt1070_remove(struct i2c_client *client) { struct qt1070_data *data = i2c_get_clientdata(client); /* Release IRQ */ free_irq(client->irq, data); input_unregister_device(data->input); kfree(data); } #ifdef CONFIG_PM_SLEEP static int qt1070_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct qt1070_data *data = i2c_get_clientdata(client); if (device_may_wakeup(dev)) enable_irq_wake(data->irq); return 0; } static int qt1070_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct qt1070_data *data = i2c_get_clientdata(client); if (device_may_wakeup(dev)) disable_irq_wake(data->irq); return 0; } #endif static SIMPLE_DEV_PM_OPS(qt1070_pm_ops, qt1070_suspend, qt1070_resume); static const struct i2c_device_id qt1070_id[] = { { "qt1070", 0 }, { }, }; MODULE_DEVICE_TABLE(i2c, qt1070_id); #ifdef CONFIG_OF static const struct of_device_id qt1070_of_match[] = { { .compatible = "qt1070", }, { }, }; MODULE_DEVICE_TABLE(of, qt1070_of_match); #endif static struct i2c_driver qt1070_driver = { .driver = { .name = "qt1070", .of_match_table = of_match_ptr(qt1070_of_match), .pm = &qt1070_pm_ops, }, .id_table = qt1070_id, .probe = qt1070_probe, .remove = qt1070_remove, }; module_i2c_driver(qt1070_driver); MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); MODULE_DESCRIPTION("Driver for AT42QT1070 QTouch sensor"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1