Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Nikita Travkin | 1928 | 99.33% | 1 | 20.00% |
Marek Behún | 12 | 0.62% | 3 | 60.00% |
Uwe Kleine-König | 1 | 0.05% | 1 | 20.00% |
Total | 1941 | 5 |
// SPDX-License-Identifier: GPL-2.0+ // Driver for Awinic AW2013 3-channel LED driver #include <linux/i2c.h> #include <linux/leds.h> #include <linux/module.h> #include <linux/regulator/consumer.h> #include <linux/mutex.h> #include <linux/of.h> #include <linux/regmap.h> #define AW2013_MAX_LEDS 3 /* Reset and ID register */ #define AW2013_RSTR 0x00 #define AW2013_RSTR_RESET 0x55 #define AW2013_RSTR_CHIP_ID 0x33 /* Global control register */ #define AW2013_GCR 0x01 #define AW2013_GCR_ENABLE BIT(0) /* LED channel enable register */ #define AW2013_LCTR 0x30 #define AW2013_LCTR_LE(x) BIT((x)) /* LED channel control registers */ #define AW2013_LCFG(x) (0x31 + (x)) #define AW2013_LCFG_IMAX_MASK (BIT(0) | BIT(1)) // Should be 0-3 #define AW2013_LCFG_MD BIT(4) #define AW2013_LCFG_FI BIT(5) #define AW2013_LCFG_FO BIT(6) /* LED channel PWM registers */ #define AW2013_REG_PWM(x) (0x34 + (x)) /* LED channel timing registers */ #define AW2013_LEDT0(x) (0x37 + (x) * 3) #define AW2013_LEDT0_T1(x) ((x) << 4) // Should be 0-7 #define AW2013_LEDT0_T2(x) (x) // Should be 0-5 #define AW2013_LEDT1(x) (0x38 + (x) * 3) #define AW2013_LEDT1_T3(x) ((x) << 4) // Should be 0-7 #define AW2013_LEDT1_T4(x) (x) // Should be 0-7 #define AW2013_LEDT2(x) (0x39 + (x) * 3) #define AW2013_LEDT2_T0(x) ((x) << 4) // Should be 0-8 #define AW2013_LEDT2_REPEAT(x) (x) // Should be 0-15 #define AW2013_REG_MAX 0x77 #define AW2013_TIME_STEP 130 /* ms */ struct aw2013; struct aw2013_led { struct aw2013 *chip; struct led_classdev cdev; u32 num; unsigned int imax; }; struct aw2013 { struct mutex mutex; /* held when writing to registers */ struct regulator *vcc_regulator; struct i2c_client *client; struct aw2013_led leds[AW2013_MAX_LEDS]; struct regmap *regmap; int num_leds; bool enabled; }; static int aw2013_chip_init(struct aw2013 *chip) { int i, ret; ret = regmap_write(chip->regmap, AW2013_GCR, AW2013_GCR_ENABLE); if (ret) { dev_err(&chip->client->dev, "Failed to enable the chip: %d\n", ret); return ret; } for (i = 0; i < chip->num_leds; i++) { ret = regmap_update_bits(chip->regmap, AW2013_LCFG(chip->leds[i].num), AW2013_LCFG_IMAX_MASK, chip->leds[i].imax); if (ret) { dev_err(&chip->client->dev, "Failed to set maximum current for led %d: %d\n", chip->leds[i].num, ret); return ret; } } return ret; } static void aw2013_chip_disable(struct aw2013 *chip) { int ret; if (!chip->enabled) return; regmap_write(chip->regmap, AW2013_GCR, 0); ret = regulator_disable(chip->vcc_regulator); if (ret) { dev_err(&chip->client->dev, "Failed to disable regulator: %d\n", ret); return; } chip->enabled = false; } static int aw2013_chip_enable(struct aw2013 *chip) { int ret; if (chip->enabled) return 0; ret = regulator_enable(chip->vcc_regulator); if (ret) { dev_err(&chip->client->dev, "Failed to enable regulator: %d\n", ret); return ret; } chip->enabled = true; ret = aw2013_chip_init(chip); if (ret) aw2013_chip_disable(chip); return ret; } static bool aw2013_chip_in_use(struct aw2013 *chip) { int i; for (i = 0; i < chip->num_leds; i++) if (chip->leds[i].cdev.brightness) return true; return false; } static int aw2013_brightness_set(struct led_classdev *cdev, enum led_brightness brightness) { struct aw2013_led *led = container_of(cdev, struct aw2013_led, cdev); int ret, num; mutex_lock(&led->chip->mutex); if (aw2013_chip_in_use(led->chip)) { ret = aw2013_chip_enable(led->chip); if (ret) goto error; } num = led->num; ret = regmap_write(led->chip->regmap, AW2013_REG_PWM(num), brightness); if (ret) goto error; if (brightness) { ret = regmap_update_bits(led->chip->regmap, AW2013_LCTR, AW2013_LCTR_LE(num), 0xFF); } else { ret = regmap_update_bits(led->chip->regmap, AW2013_LCTR, AW2013_LCTR_LE(num), 0); if (ret) goto error; ret = regmap_update_bits(led->chip->regmap, AW2013_LCFG(num), AW2013_LCFG_MD, 0); } if (ret) goto error; if (!aw2013_chip_in_use(led->chip)) aw2013_chip_disable(led->chip); error: mutex_unlock(&led->chip->mutex); return ret; } static int aw2013_blink_set(struct led_classdev *cdev, unsigned long *delay_on, unsigned long *delay_off) { struct aw2013_led *led = container_of(cdev, struct aw2013_led, cdev); int ret, num = led->num; unsigned long off = 0, on = 0; /* If no blink specified, default to 1 Hz. */ if (!*delay_off && !*delay_on) { *delay_off = 500; *delay_on = 500; } if (!led->cdev.brightness) { led->cdev.brightness = LED_FULL; ret = aw2013_brightness_set(&led->cdev, led->cdev.brightness); if (ret) return ret; } /* Never on - just set to off */ if (!*delay_on) { led->cdev.brightness = LED_OFF; return aw2013_brightness_set(&led->cdev, LED_OFF); } mutex_lock(&led->chip->mutex); /* Never off - brightness is already set, disable blinking */ if (!*delay_off) { ret = regmap_update_bits(led->chip->regmap, AW2013_LCFG(num), AW2013_LCFG_MD, 0); goto out; } /* Convert into values the HW will understand. */ off = min(5, ilog2((*delay_off - 1) / AW2013_TIME_STEP) + 1); on = min(7, ilog2((*delay_on - 1) / AW2013_TIME_STEP) + 1); *delay_off = BIT(off) * AW2013_TIME_STEP; *delay_on = BIT(on) * AW2013_TIME_STEP; /* Set timings */ ret = regmap_write(led->chip->regmap, AW2013_LEDT0(num), AW2013_LEDT0_T2(on)); if (ret) goto out; ret = regmap_write(led->chip->regmap, AW2013_LEDT1(num), AW2013_LEDT1_T4(off)); if (ret) goto out; /* Finally, enable the LED */ ret = regmap_update_bits(led->chip->regmap, AW2013_LCFG(num), AW2013_LCFG_MD, 0xFF); if (ret) goto out; ret = regmap_update_bits(led->chip->regmap, AW2013_LCTR, AW2013_LCTR_LE(num), 0xFF); out: mutex_unlock(&led->chip->mutex); return ret; } static int aw2013_probe_dt(struct aw2013 *chip) { struct device_node *np = dev_of_node(&chip->client->dev), *child; int count, ret = 0, i = 0; struct aw2013_led *led; count = of_get_available_child_count(np); if (!count || count > AW2013_MAX_LEDS) return -EINVAL; regmap_write(chip->regmap, AW2013_RSTR, AW2013_RSTR_RESET); for_each_available_child_of_node(np, child) { struct led_init_data init_data = {}; u32 source; u32 imax; ret = of_property_read_u32(child, "reg", &source); if (ret != 0 || source >= AW2013_MAX_LEDS) { dev_err(&chip->client->dev, "Couldn't read LED address: %d\n", ret); count--; continue; } led = &chip->leds[i]; led->num = source; led->chip = chip; init_data.fwnode = of_fwnode_handle(child); if (!of_property_read_u32(child, "led-max-microamp", &imax)) { led->imax = min_t(u32, imax / 5000, 3); } else { led->imax = 1; // 5mA dev_info(&chip->client->dev, "DT property led-max-microamp is missing\n"); } led->cdev.brightness_set_blocking = aw2013_brightness_set; led->cdev.blink_set = aw2013_blink_set; ret = devm_led_classdev_register_ext(&chip->client->dev, &led->cdev, &init_data); if (ret < 0) { of_node_put(child); return ret; } i++; } if (!count) return -EINVAL; chip->num_leds = i; return 0; } static const struct regmap_config aw2013_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = AW2013_REG_MAX, }; static int aw2013_probe(struct i2c_client *client) { struct aw2013 *chip; int ret; unsigned int chipid; chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); if (!chip) return -ENOMEM; mutex_init(&chip->mutex); mutex_lock(&chip->mutex); chip->client = client; i2c_set_clientdata(client, chip); chip->regmap = devm_regmap_init_i2c(client, &aw2013_regmap_config); if (IS_ERR(chip->regmap)) { ret = PTR_ERR(chip->regmap); dev_err(&client->dev, "Failed to allocate register map: %d\n", ret); goto error; } chip->vcc_regulator = devm_regulator_get(&client->dev, "vcc"); ret = PTR_ERR_OR_ZERO(chip->vcc_regulator); if (ret) { if (ret != -EPROBE_DEFER) dev_err(&client->dev, "Failed to request regulator: %d\n", ret); goto error; } ret = regulator_enable(chip->vcc_regulator); if (ret) { dev_err(&client->dev, "Failed to enable regulator: %d\n", ret); goto error; } ret = regmap_read(chip->regmap, AW2013_RSTR, &chipid); if (ret) { dev_err(&client->dev, "Failed to read chip ID: %d\n", ret); goto error_reg; } if (chipid != AW2013_RSTR_CHIP_ID) { dev_err(&client->dev, "Chip reported wrong ID: %x\n", chipid); ret = -ENODEV; goto error_reg; } ret = aw2013_probe_dt(chip); if (ret < 0) goto error_reg; ret = regulator_disable(chip->vcc_regulator); if (ret) { dev_err(&client->dev, "Failed to disable regulator: %d\n", ret); goto error; } mutex_unlock(&chip->mutex); return 0; error_reg: regulator_disable(chip->vcc_regulator); error: mutex_destroy(&chip->mutex); return ret; } static void aw2013_remove(struct i2c_client *client) { struct aw2013 *chip = i2c_get_clientdata(client); aw2013_chip_disable(chip); mutex_destroy(&chip->mutex); } static const struct of_device_id aw2013_match_table[] = { { .compatible = "awinic,aw2013", }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, aw2013_match_table); static struct i2c_driver aw2013_driver = { .driver = { .name = "leds-aw2013", .of_match_table = of_match_ptr(aw2013_match_table), }, .probe_new = aw2013_probe, .remove = aw2013_remove, }; module_i2c_driver(aw2013_driver); MODULE_AUTHOR("Nikita Travkin <nikitos.tr@gmail.com>"); MODULE_DESCRIPTION("AW2013 LED driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1