Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Vincent Knecht | 1472 | 51.92% | 5 | 35.71% |
H. Nikolaus Schaller | 1205 | 42.50% | 1 | 7.14% |
Andy Shevchenko | 110 | 3.88% | 4 | 28.57% |
Grant Feng | 42 | 1.48% | 1 | 7.14% |
Thomas Gleixner | 2 | 0.07% | 1 | 7.14% |
Wolfram Sang | 2 | 0.07% | 1 | 7.14% |
Marek Behún | 2 | 0.07% | 1 | 7.14% |
Total | 2835 | 14 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2015-16 Golden Delicious Computers * * Author: Nikolaus Schaller <hns@goldelico.com> * * LED driver for the IS31FL319{0,1,3,6,9} to drive 1, 3, 6 or 9 light * effect LEDs. */ #include <linux/err.h> #include <linux/i2c.h> #include <linux/leds.h> #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/property.h> #include <linux/regmap.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> /* register numbers */ #define IS31FL319X_SHUTDOWN 0x00 /* registers for 3190, 3191 and 3193 */ #define IS31FL3190_BREATHING 0x01 #define IS31FL3190_LEDMODE 0x02 #define IS31FL3190_CURRENT 0x03 #define IS31FL3190_PWM(channel) (0x04 + channel) #define IS31FL3190_DATA_UPDATE 0x07 #define IS31FL3190_T0(channel) (0x0a + channel) #define IS31FL3190_T1T2(channel) (0x10 + channel) #define IS31FL3190_T3T4(channel) (0x16 + channel) #define IS31FL3190_TIME_UPDATE 0x1c #define IS31FL3190_LEDCONTROL 0x1d #define IS31FL3190_RESET 0x2f #define IS31FL3190_CURRENT_uA_MIN 5000 #define IS31FL3190_CURRENT_uA_DEFAULT 42000 #define IS31FL3190_CURRENT_uA_MAX 42000 #define IS31FL3190_CURRENT_MASK GENMASK(4, 2) #define IS31FL3190_CURRENT_5_mA 0x02 #define IS31FL3190_CURRENT_10_mA 0x01 #define IS31FL3190_CURRENT_17dot5_mA 0x04 #define IS31FL3190_CURRENT_30_mA 0x03 #define IS31FL3190_CURRENT_42_mA 0x00 /* registers for 3196 and 3199 */ #define IS31FL3196_CTRL1 0x01 #define IS31FL3196_CTRL2 0x02 #define IS31FL3196_CONFIG1 0x03 #define IS31FL3196_CONFIG2 0x04 #define IS31FL3196_RAMP_MODE 0x05 #define IS31FL3196_BREATH_MARK 0x06 #define IS31FL3196_PWM(channel) (0x07 + channel) #define IS31FL3196_DATA_UPDATE 0x10 #define IS31FL3196_T0(channel) (0x11 + channel) #define IS31FL3196_T123_1 0x1a #define IS31FL3196_T123_2 0x1b #define IS31FL3196_T123_3 0x1c #define IS31FL3196_T4(channel) (0x1d + channel) #define IS31FL3196_TIME_UPDATE 0x26 #define IS31FL3196_RESET 0xff #define IS31FL3196_REG_CNT (IS31FL3196_RESET + 1) #define IS31FL319X_MAX_LEDS 9 /* CS (Current Setting) in CONFIG2 register */ #define IS31FL3196_CONFIG2_CS_SHIFT 4 #define IS31FL3196_CONFIG2_CS_MASK GENMASK(2, 0) #define IS31FL3196_CONFIG2_CS_STEP_REF 12 #define IS31FL3196_CURRENT_uA_MIN 5000 #define IS31FL3196_CURRENT_uA_MAX 40000 #define IS31FL3196_CURRENT_uA_STEP 5000 #define IS31FL3196_CURRENT_uA_DEFAULT 20000 /* Audio gain in CONFIG2 register */ #define IS31FL3196_AUDIO_GAIN_DB_MAX ((u32)21) #define IS31FL3196_AUDIO_GAIN_DB_STEP 3 /* * regmap is used as a cache of chip's register space, * to avoid reading back brightness values from chip, * which is known to hang. */ struct is31fl319x_chip { const struct is31fl319x_chipdef *cdef; struct i2c_client *client; struct gpio_desc *shutdown_gpio; struct regmap *regmap; struct mutex lock; u32 audio_gain_db; struct is31fl319x_led { struct is31fl319x_chip *chip; struct led_classdev cdev; u32 max_microamp; bool configured; } leds[IS31FL319X_MAX_LEDS]; }; struct is31fl319x_chipdef { int num_leds; u8 reset_reg; const struct regmap_config *is31fl319x_regmap_config; int (*brightness_set)(struct led_classdev *cdev, enum led_brightness brightness); u32 current_default; u32 current_min; u32 current_max; bool is_3196or3199; }; static bool is31fl319x_readable_reg(struct device *dev, unsigned int reg) { /* we have no readable registers */ return false; } static bool is31fl3190_volatile_reg(struct device *dev, unsigned int reg) { /* volatile registers are not cached */ switch (reg) { case IS31FL3190_DATA_UPDATE: case IS31FL3190_TIME_UPDATE: case IS31FL3190_RESET: return true; /* always write-through */ default: return false; } } static const struct reg_default is31fl3190_reg_defaults[] = { { IS31FL3190_LEDMODE, 0x00 }, { IS31FL3190_CURRENT, 0x00 }, { IS31FL3190_PWM(0), 0x00 }, { IS31FL3190_PWM(1), 0x00 }, { IS31FL3190_PWM(2), 0x00 }, }; static struct regmap_config is31fl3190_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = IS31FL3190_RESET, .cache_type = REGCACHE_FLAT, .readable_reg = is31fl319x_readable_reg, .volatile_reg = is31fl3190_volatile_reg, .reg_defaults = is31fl3190_reg_defaults, .num_reg_defaults = ARRAY_SIZE(is31fl3190_reg_defaults), }; static bool is31fl3196_volatile_reg(struct device *dev, unsigned int reg) { /* volatile registers are not cached */ switch (reg) { case IS31FL3196_DATA_UPDATE: case IS31FL3196_TIME_UPDATE: case IS31FL3196_RESET: return true; /* always write-through */ default: return false; } } static const struct reg_default is31fl3196_reg_defaults[] = { { IS31FL3196_CONFIG1, 0x00 }, { IS31FL3196_CONFIG2, 0x00 }, { IS31FL3196_PWM(0), 0x00 }, { IS31FL3196_PWM(1), 0x00 }, { IS31FL3196_PWM(2), 0x00 }, { IS31FL3196_PWM(3), 0x00 }, { IS31FL3196_PWM(4), 0x00 }, { IS31FL3196_PWM(5), 0x00 }, { IS31FL3196_PWM(6), 0x00 }, { IS31FL3196_PWM(7), 0x00 }, { IS31FL3196_PWM(8), 0x00 }, }; static struct regmap_config is31fl3196_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = IS31FL3196_REG_CNT, .cache_type = REGCACHE_FLAT, .readable_reg = is31fl319x_readable_reg, .volatile_reg = is31fl3196_volatile_reg, .reg_defaults = is31fl3196_reg_defaults, .num_reg_defaults = ARRAY_SIZE(is31fl3196_reg_defaults), }; static int is31fl3190_brightness_set(struct led_classdev *cdev, enum led_brightness brightness) { struct is31fl319x_led *led = container_of(cdev, struct is31fl319x_led, cdev); struct is31fl319x_chip *is31 = led->chip; int chan = led - is31->leds; int ret; int i; u8 ctrl = 0; dev_dbg(&is31->client->dev, "channel %d: %d\n", chan, brightness); mutex_lock(&is31->lock); /* update PWM register */ ret = regmap_write(is31->regmap, IS31FL3190_PWM(chan), brightness); if (ret < 0) goto out; /* read current brightness of all PWM channels */ for (i = 0; i < is31->cdef->num_leds; i++) { unsigned int pwm_value; bool on; /* * since neither cdev nor the chip can provide * the current setting, we read from the regmap cache */ ret = regmap_read(is31->regmap, IS31FL3190_PWM(i), &pwm_value); on = ret >= 0 && pwm_value > LED_OFF; ctrl |= on << i; } if (ctrl > 0) { dev_dbg(&is31->client->dev, "power up %02x\n", ctrl); regmap_write(is31->regmap, IS31FL3190_LEDCONTROL, ctrl); /* update PWMs */ regmap_write(is31->regmap, IS31FL3190_DATA_UPDATE, 0x00); /* enable chip from shut down and enable all channels */ ret = regmap_write(is31->regmap, IS31FL319X_SHUTDOWN, 0x20); } else { dev_dbg(&is31->client->dev, "power down\n"); /* shut down (no need to clear LEDCONTROL) */ ret = regmap_write(is31->regmap, IS31FL319X_SHUTDOWN, 0x01); } out: mutex_unlock(&is31->lock); return ret; } static int is31fl3196_brightness_set(struct led_classdev *cdev, enum led_brightness brightness) { struct is31fl319x_led *led = container_of(cdev, struct is31fl319x_led, cdev); struct is31fl319x_chip *is31 = led->chip; int chan = led - is31->leds; int ret; int i; u8 ctrl1 = 0, ctrl2 = 0; dev_dbg(&is31->client->dev, "channel %d: %d\n", chan, brightness); mutex_lock(&is31->lock); /* update PWM register */ ret = regmap_write(is31->regmap, IS31FL3196_PWM(chan), brightness); if (ret < 0) goto out; /* read current brightness of all PWM channels */ for (i = 0; i < is31->cdef->num_leds; i++) { unsigned int pwm_value; bool on; /* * since neither cdev nor the chip can provide * the current setting, we read from the regmap cache */ ret = regmap_read(is31->regmap, IS31FL3196_PWM(i), &pwm_value); on = ret >= 0 && pwm_value > LED_OFF; if (i < 3) ctrl1 |= on << i; /* 0..2 => bit 0..2 */ else if (i < 6) ctrl1 |= on << (i + 1); /* 3..5 => bit 4..6 */ else ctrl2 |= on << (i - 6); /* 6..8 => bit 0..2 */ } if (ctrl1 > 0 || ctrl2 > 0) { dev_dbg(&is31->client->dev, "power up %02x %02x\n", ctrl1, ctrl2); regmap_write(is31->regmap, IS31FL3196_CTRL1, ctrl1); regmap_write(is31->regmap, IS31FL3196_CTRL2, ctrl2); /* update PWMs */ regmap_write(is31->regmap, IS31FL3196_DATA_UPDATE, 0x00); /* enable chip from shut down */ ret = regmap_write(is31->regmap, IS31FL319X_SHUTDOWN, 0x01); } else { dev_dbg(&is31->client->dev, "power down\n"); /* shut down (no need to clear CTRL1/2) */ ret = regmap_write(is31->regmap, IS31FL319X_SHUTDOWN, 0x00); } out: mutex_unlock(&is31->lock); return ret; } static const struct is31fl319x_chipdef is31fl3190_cdef = { .num_leds = 1, .reset_reg = IS31FL3190_RESET, .is31fl319x_regmap_config = &is31fl3190_regmap_config, .brightness_set = is31fl3190_brightness_set, .current_default = IS31FL3190_CURRENT_uA_DEFAULT, .current_min = IS31FL3190_CURRENT_uA_MIN, .current_max = IS31FL3190_CURRENT_uA_MAX, .is_3196or3199 = false, }; static const struct is31fl319x_chipdef is31fl3193_cdef = { .num_leds = 3, .reset_reg = IS31FL3190_RESET, .is31fl319x_regmap_config = &is31fl3190_regmap_config, .brightness_set = is31fl3190_brightness_set, .current_default = IS31FL3190_CURRENT_uA_DEFAULT, .current_min = IS31FL3190_CURRENT_uA_MIN, .current_max = IS31FL3190_CURRENT_uA_MAX, .is_3196or3199 = false, }; static const struct is31fl319x_chipdef is31fl3196_cdef = { .num_leds = 6, .reset_reg = IS31FL3196_RESET, .is31fl319x_regmap_config = &is31fl3196_regmap_config, .brightness_set = is31fl3196_brightness_set, .current_default = IS31FL3196_CURRENT_uA_DEFAULT, .current_min = IS31FL3196_CURRENT_uA_MIN, .current_max = IS31FL3196_CURRENT_uA_MAX, .is_3196or3199 = true, }; static const struct is31fl319x_chipdef is31fl3199_cdef = { .num_leds = 9, .reset_reg = IS31FL3196_RESET, .is31fl319x_regmap_config = &is31fl3196_regmap_config, .brightness_set = is31fl3196_brightness_set, .current_default = IS31FL3196_CURRENT_uA_DEFAULT, .current_min = IS31FL3196_CURRENT_uA_MIN, .current_max = IS31FL3196_CURRENT_uA_MAX, .is_3196or3199 = true, }; static const struct of_device_id of_is31fl319x_match[] = { { .compatible = "issi,is31fl3190", .data = &is31fl3190_cdef, }, { .compatible = "issi,is31fl3191", .data = &is31fl3190_cdef, }, { .compatible = "issi,is31fl3193", .data = &is31fl3193_cdef, }, { .compatible = "issi,is31fl3196", .data = &is31fl3196_cdef, }, { .compatible = "issi,is31fl3199", .data = &is31fl3199_cdef, }, { .compatible = "si-en,sn3190", .data = &is31fl3190_cdef, }, { .compatible = "si-en,sn3191", .data = &is31fl3190_cdef, }, { .compatible = "si-en,sn3193", .data = &is31fl3193_cdef, }, { .compatible = "si-en,sn3196", .data = &is31fl3196_cdef, }, { .compatible = "si-en,sn3199", .data = &is31fl3199_cdef, }, { } }; MODULE_DEVICE_TABLE(of, of_is31fl319x_match); static int is31fl319x_parse_child_fw(const struct device *dev, const struct fwnode_handle *child, struct is31fl319x_led *led, struct is31fl319x_chip *is31) { struct led_classdev *cdev = &led->cdev; int ret; if (fwnode_property_read_string(child, "label", &cdev->name)) cdev->name = fwnode_get_name(child); ret = fwnode_property_read_string(child, "linux,default-trigger", &cdev->default_trigger); if (ret < 0 && ret != -EINVAL) /* is optional */ return ret; led->max_microamp = is31->cdef->current_default; ret = fwnode_property_read_u32(child, "led-max-microamp", &led->max_microamp); if (!ret) { if (led->max_microamp < is31->cdef->current_min) return -EINVAL; /* not supported */ led->max_microamp = min(led->max_microamp, is31->cdef->current_max); } return 0; } static int is31fl319x_parse_fw(struct device *dev, struct is31fl319x_chip *is31) { struct fwnode_handle *fwnode = dev_fwnode(dev), *child; int count; int ret; is31->shutdown_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH); if (IS_ERR(is31->shutdown_gpio)) return dev_err_probe(dev, PTR_ERR(is31->shutdown_gpio), "Failed to get shutdown gpio\n"); is31->cdef = device_get_match_data(dev); count = 0; fwnode_for_each_available_child_node(fwnode, child) count++; dev_dbg(dev, "probing with %d leds defined in DT\n", count); if (!count || count > is31->cdef->num_leds) return dev_err_probe(dev, -ENODEV, "Number of leds defined must be between 1 and %u\n", is31->cdef->num_leds); fwnode_for_each_available_child_node(fwnode, child) { struct is31fl319x_led *led; u32 reg; ret = fwnode_property_read_u32(child, "reg", ®); if (ret) { ret = dev_err_probe(dev, ret, "Failed to read led 'reg' property\n"); goto put_child_node; } if (reg < 1 || reg > is31->cdef->num_leds) { ret = dev_err_probe(dev, -EINVAL, "invalid led reg %u\n", reg); goto put_child_node; } led = &is31->leds[reg - 1]; if (led->configured) { ret = dev_err_probe(dev, -EINVAL, "led %u is already configured\n", reg); goto put_child_node; } ret = is31fl319x_parse_child_fw(dev, child, led, is31); if (ret) { ret = dev_err_probe(dev, ret, "led %u DT parsing failed\n", reg); goto put_child_node; } led->configured = true; } is31->audio_gain_db = 0; if (is31->cdef->is_3196or3199) { ret = fwnode_property_read_u32(fwnode, "audio-gain-db", &is31->audio_gain_db); if (!ret) is31->audio_gain_db = min(is31->audio_gain_db, IS31FL3196_AUDIO_GAIN_DB_MAX); } return 0; put_child_node: fwnode_handle_put(child); return ret; } static inline int is31fl3190_microamp_to_cs(struct device *dev, u32 microamp) { switch (microamp) { case 5000: return IS31FL3190_CURRENT_5_mA; case 10000: return IS31FL3190_CURRENT_10_mA; case 17500: return IS31FL3190_CURRENT_17dot5_mA; case 30000: return IS31FL3190_CURRENT_30_mA; case 42000: return IS31FL3190_CURRENT_42_mA; default: dev_warn(dev, "Unsupported current value: %d, using 5000 µA!\n", microamp); return IS31FL3190_CURRENT_5_mA; } } static inline int is31fl3196_microamp_to_cs(struct device *dev, u32 microamp) { /* round down to nearest supported value (range check done by caller) */ u32 step = microamp / IS31FL3196_CURRENT_uA_STEP; return ((IS31FL3196_CONFIG2_CS_STEP_REF - step) & IS31FL3196_CONFIG2_CS_MASK) << IS31FL3196_CONFIG2_CS_SHIFT; /* CS encoding */ } static inline int is31fl3196_db_to_gain(u32 dezibel) { /* round down to nearest supported value (range check done by caller) */ return dezibel / IS31FL3196_AUDIO_GAIN_DB_STEP; } static int is31fl319x_probe(struct i2c_client *client) { struct is31fl319x_chip *is31; struct device *dev = &client->dev; int err; int i = 0; u32 aggregated_led_microamp; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) return -EIO; is31 = devm_kzalloc(&client->dev, sizeof(*is31), GFP_KERNEL); if (!is31) return -ENOMEM; mutex_init(&is31->lock); err = devm_add_action(dev, (void (*)(void *))mutex_destroy, &is31->lock); if (err) return err; err = is31fl319x_parse_fw(&client->dev, is31); if (err) return err; if (is31->shutdown_gpio) { gpiod_direction_output(is31->shutdown_gpio, 0); mdelay(5); gpiod_direction_output(is31->shutdown_gpio, 1); } is31->client = client; is31->regmap = devm_regmap_init_i2c(client, is31->cdef->is31fl319x_regmap_config); if (IS_ERR(is31->regmap)) return dev_err_probe(dev, PTR_ERR(is31->regmap), "failed to allocate register map\n"); i2c_set_clientdata(client, is31); /* check for write-reply from chip (we can't read any registers) */ err = regmap_write(is31->regmap, is31->cdef->reset_reg, 0x00); if (err < 0) return dev_err_probe(dev, err, "no response from chip write\n"); /* * Kernel conventions require per-LED led-max-microamp property. * But the chip does not allow to limit individual LEDs. * So we take minimum from all subnodes for safety of hardware. */ aggregated_led_microamp = is31->cdef->current_max; for (i = 0; i < is31->cdef->num_leds; i++) if (is31->leds[i].configured && is31->leds[i].max_microamp < aggregated_led_microamp) aggregated_led_microamp = is31->leds[i].max_microamp; if (is31->cdef->is_3196or3199) regmap_write(is31->regmap, IS31FL3196_CONFIG2, is31fl3196_microamp_to_cs(dev, aggregated_led_microamp) | is31fl3196_db_to_gain(is31->audio_gain_db)); else regmap_update_bits(is31->regmap, IS31FL3190_CURRENT, IS31FL3190_CURRENT_MASK, is31fl3190_microamp_to_cs(dev, aggregated_led_microamp)); for (i = 0; i < is31->cdef->num_leds; i++) { struct is31fl319x_led *led = &is31->leds[i]; if (!led->configured) continue; led->chip = is31; led->cdev.brightness_set_blocking = is31->cdef->brightness_set; err = devm_led_classdev_register(&client->dev, &led->cdev); if (err < 0) return err; } return 0; } /* * i2c-core (and modalias) requires that id_table be properly filled, * even though it is not used for DeviceTree based instantiation. */ static const struct i2c_device_id is31fl319x_id[] = { { "is31fl3190" }, { "is31fl3191" }, { "is31fl3193" }, { "is31fl3196" }, { "is31fl3199" }, { "sn3190" }, { "sn3191" }, { "sn3193" }, { "sn3196" }, { "sn3199" }, {}, }; MODULE_DEVICE_TABLE(i2c, is31fl319x_id); static struct i2c_driver is31fl319x_driver = { .driver = { .name = "leds-is31fl319x", .of_match_table = of_is31fl319x_match, }, .probe_new = is31fl319x_probe, .id_table = is31fl319x_id, }; module_i2c_driver(is31fl319x_driver); MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>"); MODULE_AUTHOR("Andrey Utkin <andrey_utkin@fastmail.com>"); MODULE_DESCRIPTION("IS31FL319X LED driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1