| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Hans Verkuil | 616 | 99.68% | 8 | 88.89% |
| Deborah Brouwer | 2 | 0.32% | 1 | 11.11% |
| Total | 618 | 9 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * cec-pin-priv.h - internal cec-pin header * * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved. */ #ifndef LINUX_CEC_PIN_PRIV_H #define LINUX_CEC_PIN_PRIV_H #include <linux/types.h> #include <linux/atomic.h> #include <media/cec-pin.h> #define call_pin_op(pin, op, arg...) \ ((pin && pin->ops->op && !pin->adap->devnode.unregistered) ? \ pin->ops->op(pin->adap, ## arg) : 0) #define call_void_pin_op(pin, op, arg...) \ do { \ if (pin && pin->ops->op && \ !pin->adap->devnode.unregistered) \ pin->ops->op(pin->adap, ## arg); \ } while (0) enum cec_pin_state { /* CEC is off */ CEC_ST_OFF, /* CEC is idle, waiting for Rx or Tx */ CEC_ST_IDLE, /* Tx states */ /* Pending Tx, waiting for Signal Free Time to expire */ CEC_ST_TX_WAIT, /* Low-drive was detected, wait for bus to go high */ CEC_ST_TX_WAIT_FOR_HIGH, /* Drive CEC low for the start bit */ CEC_ST_TX_START_BIT_LOW, /* Drive CEC high for the start bit */ CEC_ST_TX_START_BIT_HIGH, /* Generate a start bit period that is too short */ CEC_ST_TX_START_BIT_HIGH_SHORT, /* Generate a start bit period that is too long */ CEC_ST_TX_START_BIT_HIGH_LONG, /* Drive CEC low for the start bit using the custom timing */ CEC_ST_TX_START_BIT_LOW_CUSTOM, /* Drive CEC high for the start bit using the custom timing */ CEC_ST_TX_START_BIT_HIGH_CUSTOM, /* Drive CEC low for the 0 bit */ CEC_ST_TX_DATA_BIT_0_LOW, /* Drive CEC high for the 0 bit */ CEC_ST_TX_DATA_BIT_0_HIGH, /* Generate a bit period that is too short */ CEC_ST_TX_DATA_BIT_0_HIGH_SHORT, /* Generate a bit period that is too long */ CEC_ST_TX_DATA_BIT_0_HIGH_LONG, /* Drive CEC low for the 1 bit */ CEC_ST_TX_DATA_BIT_1_LOW, /* Drive CEC high for the 1 bit */ CEC_ST_TX_DATA_BIT_1_HIGH, /* Generate a bit period that is too short */ CEC_ST_TX_DATA_BIT_1_HIGH_SHORT, /* Generate a bit period that is too long */ CEC_ST_TX_DATA_BIT_1_HIGH_LONG, /* * Wait for start of sample time to check for Ack bit or first * four initiator bits to check for Arbitration Lost. */ CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE, /* Wait for end of bit period after sampling */ CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE, /* Generate a bit period that is too short */ CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_SHORT, /* Generate a bit period that is too long */ CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE_LONG, /* Drive CEC low for a data bit using the custom timing */ CEC_ST_TX_DATA_BIT_LOW_CUSTOM, /* Drive CEC high for a data bit using the custom timing */ CEC_ST_TX_DATA_BIT_HIGH_CUSTOM, /* Drive CEC low for a standalone pulse using the custom timing */ CEC_ST_TX_PULSE_LOW_CUSTOM, /* Drive CEC high for a standalone pulse using the custom timing */ CEC_ST_TX_PULSE_HIGH_CUSTOM, /* Start low drive */ CEC_ST_TX_LOW_DRIVE, /* Rx states */ /* Start bit low detected */ CEC_ST_RX_START_BIT_LOW, /* Start bit high detected */ CEC_ST_RX_START_BIT_HIGH, /* Wait for bit sample time */ CEC_ST_RX_DATA_SAMPLE, /* Wait for earliest end of bit period after sampling */ CEC_ST_RX_DATA_POST_SAMPLE, /* Wait for CEC to go low (i.e. end of bit period) */ CEC_ST_RX_DATA_WAIT_FOR_LOW, /* Drive CEC low to send 0 Ack bit */ CEC_ST_RX_ACK_LOW, /* End of 0 Ack time, wait for earliest end of bit period */ CEC_ST_RX_ACK_LOW_POST, /* Wait for CEC to go high (i.e. end of bit period */ CEC_ST_RX_ACK_HIGH_POST, /* Wait for earliest end of bit period and end of message */ CEC_ST_RX_ACK_FINISH, /* Start low drive */ CEC_ST_RX_LOW_DRIVE, /* Monitor pin using interrupts */ CEC_ST_RX_IRQ, /* Total number of pin states */ CEC_PIN_STATES }; /* Error Injection */ /* Error injection modes */ #define CEC_ERROR_INJ_MODE_OFF 0 #define CEC_ERROR_INJ_MODE_ONCE 1 #define CEC_ERROR_INJ_MODE_ALWAYS 2 #define CEC_ERROR_INJ_MODE_TOGGLE 3 #define CEC_ERROR_INJ_MODE_MASK 3ULL /* Receive error injection options */ #define CEC_ERROR_INJ_RX_NACK_OFFSET 0 #define CEC_ERROR_INJ_RX_LOW_DRIVE_OFFSET 2 #define CEC_ERROR_INJ_RX_ADD_BYTE_OFFSET 4 #define CEC_ERROR_INJ_RX_REMOVE_BYTE_OFFSET 6 #define CEC_ERROR_INJ_RX_ARB_LOST_OFFSET 8 #define CEC_ERROR_INJ_RX_MASK 0xffffULL /* Transmit error injection options */ #define CEC_ERROR_INJ_TX_NO_EOM_OFFSET 16 #define CEC_ERROR_INJ_TX_EARLY_EOM_OFFSET 18 #define CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET 20 #define CEC_ERROR_INJ_TX_LONG_BIT_OFFSET 22 #define CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET 24 #define CEC_ERROR_INJ_TX_SHORT_START_OFFSET 26 #define CEC_ERROR_INJ_TX_LONG_START_OFFSET 28 #define CEC_ERROR_INJ_TX_CUSTOM_START_OFFSET 30 #define CEC_ERROR_INJ_TX_LAST_BIT_OFFSET 32 #define CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET 34 #define CEC_ERROR_INJ_TX_REMOVE_BYTE_OFFSET 36 #define CEC_ERROR_INJ_TX_LOW_DRIVE_OFFSET 38 #define CEC_ERROR_INJ_TX_MASK 0xffffffffffff0000ULL #define CEC_ERROR_INJ_RX_LOW_DRIVE_ARG_IDX 0 #define CEC_ERROR_INJ_RX_ARB_LOST_ARG_IDX 1 #define CEC_ERROR_INJ_TX_ADD_BYTES_ARG_IDX 2 #define CEC_ERROR_INJ_TX_SHORT_BIT_ARG_IDX 3 #define CEC_ERROR_INJ_TX_LONG_BIT_ARG_IDX 4 #define CEC_ERROR_INJ_TX_CUSTOM_BIT_ARG_IDX 5 #define CEC_ERROR_INJ_TX_LAST_BIT_ARG_IDX 6 #define CEC_ERROR_INJ_TX_LOW_DRIVE_ARG_IDX 7 #define CEC_ERROR_INJ_NUM_ARGS 8 /* Special CEC op values */ #define CEC_ERROR_INJ_OP_ANY 0x00000100 /* The default for the low/high time of the custom pulse */ #define CEC_TIM_CUSTOM_DEFAULT 1000 #define CEC_NUM_PIN_EVENTS 128 #define CEC_PIN_EVENT_FL_IS_HIGH (1 << 0) #define CEC_PIN_EVENT_FL_DROPPED (1 << 1) #define CEC_PIN_IRQ_UNCHANGED 0 #define CEC_PIN_IRQ_DISABLE 1 #define CEC_PIN_IRQ_ENABLE 2 struct cec_pin { struct cec_adapter *adap; const struct cec_pin_ops *ops; struct task_struct *kthread; wait_queue_head_t kthread_waitq; struct hrtimer timer; ktime_t ts; unsigned int wait_usecs; u16 la_mask; bool monitor_all; bool rx_eom; bool enable_irq_failed; enum cec_pin_state state; struct cec_msg tx_msg; u32 tx_bit; bool tx_nacked; u32 tx_signal_free_time; bool tx_toggle; struct cec_msg rx_msg; u32 rx_bit; bool rx_toggle; u32 rx_start_bit_low_too_short_cnt; u64 rx_start_bit_low_too_short_ts; u32 rx_start_bit_low_too_short_delta; u32 rx_start_bit_too_short_cnt; u64 rx_start_bit_too_short_ts; u32 rx_start_bit_too_short_delta; u32 rx_start_bit_too_long_cnt; u32 rx_data_bit_too_short_cnt; u64 rx_data_bit_too_short_ts; u32 rx_data_bit_too_short_delta; u32 rx_data_bit_too_long_cnt; u32 rx_low_drive_cnt; struct cec_msg work_rx_msg; u8 work_tx_status; ktime_t work_tx_ts; atomic_t work_irq_change; atomic_t work_pin_num_events; unsigned int work_pin_events_wr; unsigned int work_pin_events_rd; ktime_t work_pin_ts[CEC_NUM_PIN_EVENTS]; u8 work_pin_events[CEC_NUM_PIN_EVENTS]; bool work_pin_events_dropped; u32 work_pin_events_dropped_cnt; ktime_t timer_ts; u32 timer_cnt; u32 timer_100us_overruns; u32 timer_300us_overruns; u32 timer_max_overrun; u32 timer_sum_overrun; u32 tx_custom_low_usecs; u32 tx_custom_high_usecs; bool tx_ignore_nack_until_eom; bool tx_custom_pulse; bool tx_generated_poll; bool tx_post_eom; u8 tx_extra_bytes; u32 tx_low_drive_cnt; #ifdef CONFIG_CEC_PIN_ERROR_INJ u64 error_inj[CEC_ERROR_INJ_OP_ANY + 1]; u8 error_inj_args[CEC_ERROR_INJ_OP_ANY + 1][CEC_ERROR_INJ_NUM_ARGS]; #endif }; void cec_pin_start_timer(struct cec_pin *pin); #ifdef CONFIG_CEC_PIN_ERROR_INJ bool cec_pin_error_inj_parse_line(struct cec_adapter *adap, char *line); int cec_pin_error_inj_show(struct cec_adapter *adap, struct seq_file *sf); u16 cec_pin_rx_error_inj(struct cec_pin *pin); u16 cec_pin_tx_error_inj(struct cec_pin *pin); #endif #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1