| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Pekka Seppänen | 590 | 41.93% | 1 | 4.17% |
| Hans Verkuil | 399 | 28.36% | 5 | 20.83% |
| Trent Piepho | 186 | 13.22% | 2 | 8.33% |
| Linus Torvalds (pre-git) | 109 | 7.75% | 2 | 8.33% |
| Ondrej Zary | 99 | 7.04% | 1 | 4.17% |
| Mauro Carvalho Chehab | 14 | 1.00% | 7 | 29.17% |
| Linus Torvalds | 3 | 0.21% | 1 | 4.17% |
| Douglas Schilling Landgraf | 2 | 0.14% | 1 | 4.17% |
| Rusty Russell | 2 | 0.14% | 1 | 4.17% |
| Peter Osterlund | 1 | 0.07% | 1 | 4.17% |
| Thomas Gleixner | 1 | 0.07% | 1 | 4.17% |
| Arvind Yadav | 1 | 0.07% | 1 | 4.17% |
| Total | 1407 | 24 |
// SPDX-License-Identifier: GPL-2.0-only /* * GemTek radio card driver * * Copyright 1998 Jonas Munsin <jmunsin@iki.fi> * * GemTek hasn't released any specs on the card, so the protocol had to * be reverse engineered with dosemu. * * Besides the protocol changes, this is mostly a copy of: * * RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff * * Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> * * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org> * * Note: this card seems to swap the left and right audio channels! * * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. */ #include <linux/module.h> /* Modules */ #include <linux/init.h> /* Initdata */ #include <linux/ioport.h> /* request_region */ #include <linux/delay.h> /* udelay */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> #include <linux/io.h> /* outb, outb_p */ #include <linux/pnp.h> #include <linux/slab.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-device.h> #include "radio-isa.h" /* * Module info. */ MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>"); MODULE_DESCRIPTION("A driver for the GemTek Radio card."); MODULE_LICENSE("GPL"); MODULE_VERSION("1.0.0"); /* * Module params. */ #ifndef CONFIG_RADIO_GEMTEK_PORT #define CONFIG_RADIO_GEMTEK_PORT -1 #endif #ifndef CONFIG_RADIO_GEMTEK_PROBE #define CONFIG_RADIO_GEMTEK_PROBE 1 #endif #define GEMTEK_MAX 4 static bool probe = CONFIG_RADIO_GEMTEK_PROBE; static bool hardmute; static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT, [1 ... (GEMTEK_MAX - 1)] = -1 }; static int radio_nr[GEMTEK_MAX] = { [0 ... (GEMTEK_MAX - 1)] = -1 }; module_param(probe, bool, 0444); MODULE_PARM_DESC(probe, "Enable automatic device probing."); module_param(hardmute, bool, 0644); MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may reduce static noise."); module_param_array(io, int, NULL, 0444); MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic probing is disabled or fails. The most common I/O ports are: 0x20c 0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to work for the combined sound/radiocard)."); module_param_array(radio_nr, int, NULL, 0444); MODULE_PARM_DESC(radio_nr, "Radio device numbers"); /* * Frequency calculation constants. Intermediate frequency 10.52 MHz (nominal * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz). */ #define FSCALE 8 #define IF_OFFSET ((unsigned int)(10.52 * 16000 * (1<<FSCALE))) #define REF_FREQ ((unsigned int)(6.39 * 16 * (1<<FSCALE))) #define GEMTEK_CK 0x01 /* Clock signal */ #define GEMTEK_DA 0x02 /* Serial data */ #define GEMTEK_CE 0x04 /* Chip enable */ #define GEMTEK_NS 0x08 /* No signal */ #define GEMTEK_MT 0x10 /* Line mute */ #define GEMTEK_STDF_3_125_KHZ 0x01 /* Standard frequency 3.125 kHz */ #define GEMTEK_PLL_OFF 0x07 /* PLL off */ #define BU2614_BUS_SIZE 32 /* BU2614 / BU2614FS bus size */ #define SHORT_DELAY 5 /* usec */ #define LONG_DELAY 75 /* usec */ struct gemtek { struct radio_isa_card isa; bool muted; u32 bu2614data; }; #define BU2614_FREQ_BITS 16 /* D0..D15, Frequency data */ #define BU2614_PORT_BITS 3 /* P0..P2, Output port control data */ #define BU2614_VOID_BITS 4 /* unused */ #define BU2614_FMES_BITS 1 /* CT, Frequency measurement beginning data */ #define BU2614_STDF_BITS 3 /* R0..R2, Standard frequency data */ #define BU2614_SWIN_BITS 1 /* S, Switch between FMIN / AMIN */ #define BU2614_SWAL_BITS 1 /* PS, Swallow counter division (AMIN only)*/ #define BU2614_VOID2_BITS 1 /* unused */ #define BU2614_FMUN_BITS 1 /* GT, Frequency measurement time & unlock */ #define BU2614_TEST_BITS 1 /* TS, Test data is input */ #define BU2614_FREQ_SHIFT 0 #define BU2614_PORT_SHIFT (BU2614_FREQ_BITS + BU2614_FREQ_SHIFT) #define BU2614_VOID_SHIFT (BU2614_PORT_BITS + BU2614_PORT_SHIFT) #define BU2614_FMES_SHIFT (BU2614_VOID_BITS + BU2614_VOID_SHIFT) #define BU2614_STDF_SHIFT (BU2614_FMES_BITS + BU2614_FMES_SHIFT) #define BU2614_SWIN_SHIFT (BU2614_STDF_BITS + BU2614_STDF_SHIFT) #define BU2614_SWAL_SHIFT (BU2614_SWIN_BITS + BU2614_SWIN_SHIFT) #define BU2614_VOID2_SHIFT (BU2614_SWAL_BITS + BU2614_SWAL_SHIFT) #define BU2614_FMUN_SHIFT (BU2614_VOID2_BITS + BU2614_VOID2_SHIFT) #define BU2614_TEST_SHIFT (BU2614_FMUN_BITS + BU2614_FMUN_SHIFT) #define MKMASK(field) (((1UL<<BU2614_##field##_BITS) - 1) << \ BU2614_##field##_SHIFT) #define BU2614_PORT_MASK MKMASK(PORT) #define BU2614_FREQ_MASK MKMASK(FREQ) #define BU2614_VOID_MASK MKMASK(VOID) #define BU2614_FMES_MASK MKMASK(FMES) #define BU2614_STDF_MASK MKMASK(STDF) #define BU2614_SWIN_MASK MKMASK(SWIN) #define BU2614_SWAL_MASK MKMASK(SWAL) #define BU2614_VOID2_MASK MKMASK(VOID2) #define BU2614_FMUN_MASK MKMASK(FMUN) #define BU2614_TEST_MASK MKMASK(TEST) /* * Set data which will be sent to BU2614FS. */ #define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \ ((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT)) /* * Transmit settings to BU2614FS over GemTek IC. */ static void gemtek_bu2614_transmit(struct gemtek *gt) { struct radio_isa_card *isa = >->isa; int i, bit, q, mute; mute = gt->muted ? GEMTEK_MT : 0x00; outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io); udelay(LONG_DELAY); for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) { bit = (q & 1) ? GEMTEK_DA : 0; outb_p(mute | GEMTEK_CE | bit, isa->io); udelay(SHORT_DELAY); outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io); udelay(SHORT_DELAY); } outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io); udelay(SHORT_DELAY); } /* * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected). */ static unsigned long gemtek_convfreq(unsigned long freq) { return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ; } static struct radio_isa_card *gemtek_alloc(void) { struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL); if (gt) gt->muted = true; return gt ? >->isa : NULL; } /* * Set FM-frequency. */ static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq) { struct gemtek *gt = container_of(isa, struct gemtek, isa); if (hardmute && gt->muted) return 0; gemtek_bu2614_set(gt, BU2614_PORT, 0); gemtek_bu2614_set(gt, BU2614_FMES, 0); gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */ gemtek_bu2614_set(gt, BU2614_SWAL, 0); gemtek_bu2614_set(gt, BU2614_FMUN, 1); /* GT bit set */ gemtek_bu2614_set(gt, BU2614_TEST, 0); gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ); gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq)); gemtek_bu2614_transmit(gt); return 0; } /* * Set mute flag. */ static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { struct gemtek *gt = container_of(isa, struct gemtek, isa); int i; gt->muted = mute; if (hardmute) { if (!mute) return gemtek_s_frequency(isa, isa->freq); /* Turn off PLL, disable data output */ gemtek_bu2614_set(gt, BU2614_PORT, 0); gemtek_bu2614_set(gt, BU2614_FMES, 0); /* CT bit off */ gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */ gemtek_bu2614_set(gt, BU2614_SWAL, 0); gemtek_bu2614_set(gt, BU2614_FMUN, 0); /* GT bit off */ gemtek_bu2614_set(gt, BU2614_TEST, 0); gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF); gemtek_bu2614_set(gt, BU2614_FREQ, 0); gemtek_bu2614_transmit(gt); return 0; } /* Read bus contents (CE, CK and DA). */ i = inb_p(isa->io); /* Write it back with mute flag set. */ outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io); udelay(SHORT_DELAY); return 0; } static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa) { if (inb_p(isa->io) & GEMTEK_NS) return V4L2_TUNER_SUB_MONO; return V4L2_TUNER_SUB_STEREO; } /* * Check if requested card acts like GemTek Radio card. */ static bool gemtek_probe(struct radio_isa_card *isa, int io) { int i, q; q = inb_p(io); /* Read bus contents before probing. */ /* Try to turn on CE, CK and DA respectively and check if card responds properly. */ for (i = 0; i < 3; ++i) { outb_p(1 << i, io); udelay(SHORT_DELAY); if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5)))) return false; } outb_p(q >> 5, io); /* Write bus contents back. */ udelay(SHORT_DELAY); return true; } static const struct radio_isa_ops gemtek_ops = { .alloc = gemtek_alloc, .probe = gemtek_probe, .s_mute_volume = gemtek_s_mute_volume, .s_frequency = gemtek_s_frequency, .g_rxsubchans = gemtek_g_rxsubchans, }; static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c }; #ifdef CONFIG_PNP static const struct pnp_device_id gemtek_pnp_devices[] = { /* AOpen FX-3D/Pro Radio */ {.id = "ADS7183", .driver_data = 0}, {.id = ""} }; MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices); #endif static struct radio_isa_driver gemtek_driver = { .driver = { .match = radio_isa_match, .probe = radio_isa_probe, .remove = radio_isa_remove, .driver = { .name = "radio-gemtek", }, }, #ifdef CONFIG_PNP .pnp_driver = { .name = "radio-gemtek", .id_table = gemtek_pnp_devices, .probe = radio_isa_pnp_probe, .remove = radio_isa_pnp_remove, }, #endif .io_params = io, .radio_nr_params = radio_nr, .io_ports = gemtek_ioports, .num_of_io_ports = ARRAY_SIZE(gemtek_ioports), .region_size = 1, .card = "GemTek Radio", .ops = &gemtek_ops, .has_stereo = true, }; static int __init gemtek_init(void) { gemtek_driver.probe = probe; #ifdef CONFIG_PNP pnp_register_driver(&gemtek_driver.pnp_driver); #endif return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX); } static void __exit gemtek_exit(void) { hardmute = true; /* Turn off PLL */ #ifdef CONFIG_PNP pnp_unregister_driver(&gemtek_driver.pnp_driver); #endif isa_unregister_driver(&gemtek_driver.driver); } module_init(gemtek_init); module_exit(gemtek_exit);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1