Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Linus Walleij | 2407 | 98.81% | 3 | 30.00% |
Jingoo Han | 19 | 0.78% | 1 | 10.00% |
Lv Ruyi | 2 | 0.08% | 1 | 10.00% |
Lee Jones | 2 | 0.08% | 1 | 10.00% |
Thomas Gleixner | 2 | 0.08% | 1 | 10.00% |
SF Markus Elfring | 2 | 0.08% | 1 | 10.00% |
Krzysztof Kozlowski | 1 | 0.04% | 1 | 10.00% |
Arnd Bergmann | 1 | 0.04% | 1 | 10.00% |
Total | 2436 | 10 |
// SPDX-License-Identifier: GPL-2.0-only /* * Compaq iPAQ h3xxx Atmel microcontroller companion support * * This is an Atmel AT90LS8535 with a special flashed-in firmware that * implements the special protocol used by this driver. * * based on previous kernel 2.4 version by Andrew Christian * Author : Alessandro Gardich <gremlin@gremlin.it> * Author : Dmitry Artamonow <mad_soft@inbox.ru> * Author : Linus Walleij <linus.walleij@linaro.org> */ #include <linux/module.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/pm.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mfd/core.h> #include <linux/mfd/ipaq-micro.h> #include <linux/string.h> #include <linux/random.h> #include <linux/slab.h> #include <linux/list.h> #include <mach/hardware.h> static void ipaq_micro_trigger_tx(struct ipaq_micro *micro) { struct ipaq_micro_txdev *tx = µ->tx; struct ipaq_micro_msg *msg = micro->msg; int i, bp; u8 checksum; u32 val; bp = 0; tx->buf[bp++] = CHAR_SOF; checksum = ((msg->id & 0x0f) << 4) | (msg->tx_len & 0x0f); tx->buf[bp++] = checksum; for (i = 0; i < msg->tx_len; i++) { tx->buf[bp++] = msg->tx_data[i]; checksum += msg->tx_data[i]; } tx->buf[bp++] = checksum; tx->len = bp; tx->index = 0; /* Enable interrupt */ val = readl(micro->base + UTCR3); val |= UTCR3_TIE; writel(val, micro->base + UTCR3); } int ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg) { unsigned long flags; dev_dbg(micro->dev, "TX msg: %02x, %d bytes\n", msg->id, msg->tx_len); spin_lock_irqsave(µ->lock, flags); if (micro->msg) { list_add_tail(&msg->node, µ->queue); spin_unlock_irqrestore(µ->lock, flags); return 0; } micro->msg = msg; ipaq_micro_trigger_tx(micro); spin_unlock_irqrestore(µ->lock, flags); return 0; } EXPORT_SYMBOL(ipaq_micro_tx_msg); static void micro_rx_msg(struct ipaq_micro *micro, u8 id, int len, u8 *data) { int i; dev_dbg(micro->dev, "RX msg: %02x, %d bytes\n", id, len); spin_lock(µ->lock); switch (id) { case MSG_VERSION: case MSG_EEPROM_READ: case MSG_EEPROM_WRITE: case MSG_BACKLIGHT: case MSG_NOTIFY_LED: case MSG_THERMAL_SENSOR: case MSG_BATTERY: /* Handle synchronous messages */ if (micro->msg && micro->msg->id == id) { struct ipaq_micro_msg *msg = micro->msg; memcpy(msg->rx_data, data, len); msg->rx_len = len; complete(µ->msg->ack); if (!list_empty(µ->queue)) { micro->msg = list_entry(micro->queue.next, struct ipaq_micro_msg, node); list_del_init(µ->msg->node); ipaq_micro_trigger_tx(micro); } else micro->msg = NULL; dev_dbg(micro->dev, "OK RX message 0x%02x\n", id); } else { dev_err(micro->dev, "out of band RX message 0x%02x\n", id); if (!micro->msg) dev_info(micro->dev, "no message queued\n"); else dev_info(micro->dev, "expected message %02x\n", micro->msg->id); } break; case MSG_KEYBOARD: if (micro->key) micro->key(micro->key_data, len, data); else dev_dbg(micro->dev, "key message ignored, no handle\n"); break; case MSG_TOUCHSCREEN: if (micro->ts) micro->ts(micro->ts_data, len, data); else dev_dbg(micro->dev, "touchscreen message ignored, no handle\n"); break; default: dev_err(micro->dev, "unknown msg %d [%d] ", id, len); for (i = 0; i < len; ++i) pr_cont("0x%02x ", data[i]); pr_cont("\n"); } spin_unlock(µ->lock); } static void micro_process_char(struct ipaq_micro *micro, u8 ch) { struct ipaq_micro_rxdev *rx = µ->rx; switch (rx->state) { case STATE_SOF: /* Looking for SOF */ if (ch == CHAR_SOF) rx->state = STATE_ID; /* Next byte is the id and len */ break; case STATE_ID: /* Looking for id and len byte */ rx->id = (ch & 0xf0) >> 4; rx->len = (ch & 0x0f); rx->index = 0; rx->chksum = ch; rx->state = (rx->len > 0) ? STATE_DATA : STATE_CHKSUM; break; case STATE_DATA: /* Looking for 'len' data bytes */ rx->chksum += ch; rx->buf[rx->index] = ch; if (++rx->index == rx->len) rx->state = STATE_CHKSUM; break; case STATE_CHKSUM: /* Looking for the checksum */ if (ch == rx->chksum) micro_rx_msg(micro, rx->id, rx->len, rx->buf); rx->state = STATE_SOF; break; } } static void micro_rx_chars(struct ipaq_micro *micro) { u32 status, ch; while ((status = readl(micro->base + UTSR1)) & UTSR1_RNE) { ch = readl(micro->base + UTDR); if (status & UTSR1_PRE) dev_err(micro->dev, "rx: parity error\n"); else if (status & UTSR1_FRE) dev_err(micro->dev, "rx: framing error\n"); else if (status & UTSR1_ROR) dev_err(micro->dev, "rx: overrun error\n"); micro_process_char(micro, ch); } } static void ipaq_micro_get_version(struct ipaq_micro *micro) { struct ipaq_micro_msg msg = { .id = MSG_VERSION, }; ipaq_micro_tx_msg_sync(micro, &msg); if (msg.rx_len == 4) { memcpy(micro->version, msg.rx_data, 4); micro->version[4] = '\0'; } else if (msg.rx_len == 9) { memcpy(micro->version, msg.rx_data, 4); micro->version[4] = '\0'; /* Bytes 4-7 are "pack", byte 8 is "boot type" */ } else { dev_err(micro->dev, "illegal version message %d bytes\n", msg.rx_len); } } static void ipaq_micro_eeprom_read(struct ipaq_micro *micro, u8 address, u8 len, u8 *data) { struct ipaq_micro_msg msg = { .id = MSG_EEPROM_READ, }; u8 i; for (i = 0; i < len; i++) { msg.tx_data[0] = address + i; msg.tx_data[1] = 1; msg.tx_len = 2; ipaq_micro_tx_msg_sync(micro, &msg); memcpy(data + (i * 2), msg.rx_data, 2); } } static char *ipaq_micro_str(u8 *wchar, u8 len) { char retstr[256]; u8 i; for (i = 0; i < len / 2; i++) retstr[i] = wchar[i * 2]; return kstrdup(retstr, GFP_KERNEL); } static u16 ipaq_micro_to_u16(u8 *data) { return data[1] << 8 | data[0]; } static void __init ipaq_micro_eeprom_dump(struct ipaq_micro *micro) { u8 dump[256]; char *str; ipaq_micro_eeprom_read(micro, 0, 128, dump); str = ipaq_micro_str(dump, 10); if (str) { dev_info(micro->dev, "HW version %s\n", str); kfree(str); } str = ipaq_micro_str(dump+10, 40); if (str) { dev_info(micro->dev, "serial number: %s\n", str); /* Feed the random pool with this */ add_device_randomness(str, strlen(str)); kfree(str); } str = ipaq_micro_str(dump+50, 20); if (str) { dev_info(micro->dev, "module ID: %s\n", str); kfree(str); } str = ipaq_micro_str(dump+70, 10); if (str) { dev_info(micro->dev, "product revision: %s\n", str); kfree(str); } dev_info(micro->dev, "product ID: %u\n", ipaq_micro_to_u16(dump+80)); dev_info(micro->dev, "frame rate: %u fps\n", ipaq_micro_to_u16(dump+82)); dev_info(micro->dev, "page mode: %u\n", ipaq_micro_to_u16(dump+84)); dev_info(micro->dev, "country ID: %u\n", ipaq_micro_to_u16(dump+86)); dev_info(micro->dev, "color display: %s\n", ipaq_micro_to_u16(dump+88) ? "yes" : "no"); dev_info(micro->dev, "ROM size: %u MiB\n", ipaq_micro_to_u16(dump+90)); dev_info(micro->dev, "RAM size: %u KiB\n", ipaq_micro_to_u16(dump+92)); dev_info(micro->dev, "screen: %u x %u\n", ipaq_micro_to_u16(dump+94), ipaq_micro_to_u16(dump+96)); } static void micro_tx_chars(struct ipaq_micro *micro) { struct ipaq_micro_txdev *tx = µ->tx; u32 val; while ((tx->index < tx->len) && (readl(micro->base + UTSR1) & UTSR1_TNF)) { writel(tx->buf[tx->index], micro->base + UTDR); tx->index++; } /* Stop interrupts */ val = readl(micro->base + UTCR3); val &= ~UTCR3_TIE; writel(val, micro->base + UTCR3); } static void micro_reset_comm(struct ipaq_micro *micro) { struct ipaq_micro_rxdev *rx = µ->rx; u32 val; if (micro->msg) complete(µ->msg->ack); /* Initialize Serial channel protocol frame */ rx->state = STATE_SOF; /* Reset the state machine */ /* Set up interrupts */ writel(0x01, micro->sdlc + 0x0); /* Select UART mode */ /* Clean up CR3 */ writel(0x0, micro->base + UTCR3); /* Format: 8N1 */ writel(UTCR0_8BitData | UTCR0_1StpBit, micro->base + UTCR0); /* Baud rate: 115200 */ writel(0x0, micro->base + UTCR1); writel(0x1, micro->base + UTCR2); /* Clear SR0 */ writel(0xff, micro->base + UTSR0); /* Enable RX int, disable TX int */ writel(UTCR3_TXE | UTCR3_RXE | UTCR3_RIE, micro->base + UTCR3); val = readl(micro->base + UTCR3); val &= ~UTCR3_TIE; writel(val, micro->base + UTCR3); } static irqreturn_t micro_serial_isr(int irq, void *dev_id) { struct ipaq_micro *micro = dev_id; struct ipaq_micro_txdev *tx = µ->tx; u32 status; status = readl(micro->base + UTSR0); do { if (status & (UTSR0_RID | UTSR0_RFS)) { if (status & UTSR0_RID) /* Clear the Receiver IDLE bit */ writel(UTSR0_RID, micro->base + UTSR0); micro_rx_chars(micro); } /* Clear break bits */ if (status & (UTSR0_RBB | UTSR0_REB)) writel(status & (UTSR0_RBB | UTSR0_REB), micro->base + UTSR0); if (status & UTSR0_TFS) micro_tx_chars(micro); status = readl(micro->base + UTSR0); } while (((tx->index < tx->len) && (status & UTSR0_TFS)) || (status & (UTSR0_RFS | UTSR0_RID))); return IRQ_HANDLED; } static const struct mfd_cell micro_cells[] = { { .name = "ipaq-micro-backlight", }, { .name = "ipaq-micro-battery", }, { .name = "ipaq-micro-keys", }, { .name = "ipaq-micro-ts", }, { .name = "ipaq-micro-leds", }, }; static int __maybe_unused micro_resume(struct device *dev) { struct ipaq_micro *micro = dev_get_drvdata(dev); micro_reset_comm(micro); mdelay(10); return 0; } static int __init micro_probe(struct platform_device *pdev) { struct ipaq_micro *micro; struct resource *res; int ret; int irq; micro = devm_kzalloc(&pdev->dev, sizeof(*micro), GFP_KERNEL); if (!micro) return -ENOMEM; micro->dev = &pdev->dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); micro->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(micro->base)) return PTR_ERR(micro->base); micro->sdlc = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(micro->sdlc)) return PTR_ERR(micro->sdlc); micro_reset_comm(micro); irq = platform_get_irq(pdev, 0); if (irq < 0) return -EINVAL; ret = devm_request_irq(&pdev->dev, irq, micro_serial_isr, IRQF_SHARED, "ipaq-micro", micro); if (ret) { dev_err(&pdev->dev, "unable to grab serial port IRQ\n"); return ret; } else dev_info(&pdev->dev, "grabbed serial port IRQ\n"); spin_lock_init(µ->lock); INIT_LIST_HEAD(µ->queue); platform_set_drvdata(pdev, micro); ret = mfd_add_devices(&pdev->dev, pdev->id, micro_cells, ARRAY_SIZE(micro_cells), NULL, 0, NULL); if (ret) { dev_err(&pdev->dev, "error adding MFD cells"); return ret; } /* Check version */ ipaq_micro_get_version(micro); dev_info(&pdev->dev, "Atmel micro ASIC version %s\n", micro->version); ipaq_micro_eeprom_dump(micro); return 0; } static const struct dev_pm_ops micro_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(NULL, micro_resume) }; static struct platform_driver micro_device_driver = { .driver = { .name = "ipaq-h3xxx-micro", .pm = µ_dev_pm_ops, .suppress_bind_attrs = true, }, }; builtin_platform_driver_probe(micro_device_driver, micro_probe);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1