Contributors: 12
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Linus Torvalds (pre-git) |
891 |
87.87% |
1 |
5.00% |
| Joe Perches |
39 |
3.85% |
9 |
45.00% |
| Christoph Hellwig |
23 |
2.27% |
1 |
5.00% |
| Esben Nielsen |
16 |
1.58% |
1 |
5.00% |
| Hideaki Yoshifuji / 吉藤英明 |
15 |
1.48% |
1 |
5.00% |
| Andrew Morton |
10 |
0.99% |
1 |
5.00% |
| Wang Chen |
6 |
0.59% |
1 |
5.00% |
| Stephen Hemminger |
5 |
0.49% |
1 |
5.00% |
| Arnaldo Carvalho de Melo |
3 |
0.30% |
1 |
5.00% |
| Tejun Heo |
3 |
0.30% |
1 |
5.00% |
| Al Viro |
2 |
0.20% |
1 |
5.00% |
| Adrian Bunk |
1 |
0.10% |
1 |
5.00% |
| Total |
1014 |
|
20 |
|
/*
* Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
*
* Written 1994-1999 by Avery Pennarun.
* Derived from skeleton.c by Donald Becker.
*
* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
* for sponsoring the further development of this driver.
*
* **********************
*
* The original copyright of skeleton.c was as follows:
*
* skeleton.c Written 1993 by Donald Becker.
* Copyright 1993 United States Government as represented by the
* Director, National Security Agency. This software may only be used
* and distributed according to the terms of the GNU General Public License as
* modified by SRC, incorporated herein by reference.
*
* **********************
*
* For more details, see drivers/net/arcnet.c
*
* **********************
*/
#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/if_arp.h>
#include <net/arp.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include "arcdevice.h"
static __be16 type_trans(struct sk_buff *skb, struct net_device *dev);
static void rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length);
static int build_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, uint8_t daddr);
static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
int bufnum);
static struct ArcProto rfc1051_proto = {
.suffix = 's',
.mtu = XMTU - RFC1051_HDR_SIZE,
.is_ip = 1,
.rx = rx,
.build_header = build_header,
.prepare_tx = prepare_tx,
.continue_tx = NULL,
.ack_tx = NULL
};
static int __init arcnet_rfc1051_init(void)
{
pr_info("%s\n", "RFC1051 \"simple standard\" (`s') encapsulation support loaded");
arc_proto_map[ARC_P_IP_RFC1051]
= arc_proto_map[ARC_P_ARP_RFC1051]
= &rfc1051_proto;
/* if someone else already owns the broadcast, we won't take it */
if (arc_bcast_proto == arc_proto_default)
arc_bcast_proto = &rfc1051_proto;
return 0;
}
static void __exit arcnet_rfc1051_exit(void)
{
arcnet_unregister_proto(&rfc1051_proto);
}
module_init(arcnet_rfc1051_init);
module_exit(arcnet_rfc1051_exit);
MODULE_LICENSE("GPL");
/* Determine a packet's protocol ID.
*
* With ARCnet we have to convert everything to Ethernet-style stuff.
*/
static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
{
struct archdr *pkt = (struct archdr *)skb->data;
struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
/* Pull off the arcnet header. */
skb_reset_mac_header(skb);
skb_pull(skb, hdr_size);
if (pkt->hard.dest == 0) {
skb->pkt_type = PACKET_BROADCAST;
} else if (dev->flags & IFF_PROMISC) {
/* if we're not sending to ourselves :) */
if (pkt->hard.dest != dev->dev_addr[0])
skb->pkt_type = PACKET_OTHERHOST;
}
/* now return the protocol number */
switch (soft->proto) {
case ARC_P_IP_RFC1051:
return htons(ETH_P_IP);
case ARC_P_ARP_RFC1051:
return htons(ETH_P_ARP);
default:
dev->stats.rx_errors++;
dev->stats.rx_crc_errors++;
return 0;
}
return htons(ETH_P_IP);
}
/* packet receiver */
static void rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length)
{
struct arcnet_local *lp = netdev_priv(dev);
struct sk_buff *skb;
struct archdr *pkt = pkthdr;
int ofs;
arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length);
if (length >= MinTU)
ofs = 512 - length;
else
ofs = 256 - length;
skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
if (!skb) {
dev->stats.rx_dropped++;
return;
}
skb_put(skb, length + ARC_HDR_SIZE);
skb->dev = dev;
pkt = (struct archdr *)skb->data;
/* up to sizeof(pkt->soft) has already been copied from the card */
memcpy(pkt, pkthdr, sizeof(struct archdr));
if (length > sizeof(pkt->soft))
lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
pkt->soft.raw + sizeof(pkt->soft),
length - sizeof(pkt->soft));
if (BUGLVL(D_SKB))
arcnet_dump_skb(dev, skb, "rx");
skb->protocol = type_trans(skb, dev);
netif_rx(skb);
}
/* Create the ARCnet hard/soft headers for RFC1051 */
static int build_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, uint8_t daddr)
{
int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
struct archdr *pkt = skb_push(skb, hdr_size);
struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
/* set the protocol ID according to RFC1051 */
switch (type) {
case ETH_P_IP:
soft->proto = ARC_P_IP_RFC1051;
break;
case ETH_P_ARP:
soft->proto = ARC_P_ARP_RFC1051;
break;
default:
arc_printk(D_NORMAL, dev, "RFC1051: I don't understand protocol %d (%Xh)\n",
type, type);
dev->stats.tx_errors++;
dev->stats.tx_aborted_errors++;
return 0;
}
/* Set the source hardware address.
*
* This is pretty pointless for most purposes, but it can help in
* debugging. ARCnet does not allow us to change the source address
* in the actual packet sent.
*/
pkt->hard.source = *dev->dev_addr;
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
/* FIXME: fill in the last byte of the dest ipaddr here to
* better comply with RFC1051 in "noarp" mode.
*/
pkt->hard.dest = 0;
return hdr_size;
}
/* otherwise, just fill it in and go! */
pkt->hard.dest = daddr;
return hdr_size; /* success */
}
static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
int bufnum)
{
struct arcnet_local *lp = netdev_priv(dev);
struct arc_hardware *hard = &pkt->hard;
int ofs;
arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
lp->next_tx, lp->cur_tx, bufnum);
/* hard header is not included in packet length */
length -= ARC_HDR_SIZE;
if (length > XMTU) {
/* should never happen! other people already check for this. */
arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n",
length, XMTU);
length = XMTU;
}
if (length > MinTU) {
hard->offset[0] = 0;
hard->offset[1] = ofs = 512 - length;
} else if (length > MTU) {
hard->offset[0] = 0;
hard->offset[1] = ofs = 512 - length - 3;
} else {
hard->offset[0] = ofs = 256 - length;
}
lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
lp->lastload_dest = hard->dest;
return 1; /* done */
}