Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Florian Fainelli | 801 | 70.45% | 1 | 33.33% |
Russell King | 336 | 29.55% | 2 | 66.67% |
Total | 1137 | 3 |
// SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause /* * Northstar Plus switch SerDes/SGMII PHY main logic * * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com> */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/delay.h> #include <linux/kernel.h> #include <linux/phy.h> #include <linux/phylink.h> #include <net/dsa.h> #include "b53_priv.h" #include "b53_serdes.h" #include "b53_regs.h" static inline struct b53_pcs *pcs_to_b53_pcs(struct phylink_pcs *pcs) { return container_of(pcs, struct b53_pcs, pcs); } static void b53_serdes_write_blk(struct b53_device *dev, u8 offset, u16 block, u16 value) { b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block); b53_write16(dev, B53_SERDES_PAGE, offset, value); } static u16 b53_serdes_read_blk(struct b53_device *dev, u8 offset, u16 block) { u16 value; b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block); b53_read16(dev, B53_SERDES_PAGE, offset, &value); return value; } static void b53_serdes_set_lane(struct b53_device *dev, u8 lane) { if (dev->serdes_lane == lane) return; WARN_ON(lane > 1); b53_serdes_write_blk(dev, B53_SERDES_LANE, SERDES_XGXSBLK0_BLOCKADDRESS, lane); dev->serdes_lane = lane; } static void b53_serdes_write(struct b53_device *dev, u8 lane, u8 offset, u16 block, u16 value) { b53_serdes_set_lane(dev, lane); b53_serdes_write_blk(dev, offset, block, value); } static u16 b53_serdes_read(struct b53_device *dev, u8 lane, u8 offset, u16 block) { b53_serdes_set_lane(dev, lane); return b53_serdes_read_blk(dev, offset, block); } static int b53_serdes_config(struct phylink_pcs *pcs, unsigned int mode, phy_interface_t interface, const unsigned long *advertising, bool permit_pause_to_mac) { struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev; u8 lane = pcs_to_b53_pcs(pcs)->lane; u16 reg; reg = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_CONTROL(1), SERDES_DIGITAL_BLK); if (interface == PHY_INTERFACE_MODE_1000BASEX) reg |= FIBER_MODE_1000X; else reg &= ~FIBER_MODE_1000X; b53_serdes_write(dev, lane, B53_SERDES_DIGITAL_CONTROL(1), SERDES_DIGITAL_BLK, reg); return 0; } static void b53_serdes_an_restart(struct phylink_pcs *pcs) { struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev; u8 lane = pcs_to_b53_pcs(pcs)->lane; u16 reg; reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR), SERDES_MII_BLK); reg |= BMCR_ANRESTART; b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR), SERDES_MII_BLK, reg); } static void b53_serdes_get_state(struct phylink_pcs *pcs, struct phylink_link_state *state) { struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev; u8 lane = pcs_to_b53_pcs(pcs)->lane; u16 dig, bmsr; dig = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_STATUS, SERDES_DIGITAL_BLK); bmsr = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMSR), SERDES_MII_BLK); switch ((dig >> SPEED_STATUS_SHIFT) & SPEED_STATUS_MASK) { case SPEED_STATUS_10: state->speed = SPEED_10; break; case SPEED_STATUS_100: state->speed = SPEED_100; break; case SPEED_STATUS_1000: state->speed = SPEED_1000; break; default: case SPEED_STATUS_2500: state->speed = SPEED_2500; break; } state->duplex = dig & DUPLEX_STATUS ? DUPLEX_FULL : DUPLEX_HALF; state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE); state->link = !!(dig & LINK_STATUS); if (dig & PAUSE_RESOLUTION_RX_SIDE) state->pause |= MLO_PAUSE_RX; if (dig & PAUSE_RESOLUTION_TX_SIDE) state->pause |= MLO_PAUSE_TX; } void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode, phy_interface_t interface, bool link_up) { u8 lane = b53_serdes_map_lane(dev, port); u16 reg; if (lane == B53_INVALID_LANE) return; reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR), SERDES_MII_BLK); if (link_up) reg &= ~BMCR_PDOWN; else reg |= BMCR_PDOWN; b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR), SERDES_MII_BLK, reg); } EXPORT_SYMBOL(b53_serdes_link_set); static const struct phylink_pcs_ops b53_pcs_ops = { .pcs_get_state = b53_serdes_get_state, .pcs_config = b53_serdes_config, .pcs_an_restart = b53_serdes_an_restart, }; void b53_serdes_phylink_get_caps(struct b53_device *dev, int port, struct phylink_config *config) { u8 lane = b53_serdes_map_lane(dev, port); if (lane == B53_INVALID_LANE) return; switch (lane) { case 0: /* It appears lane 0 supports 2500base-X and 1000base-X */ __set_bit(PHY_INTERFACE_MODE_2500BASEX, config->supported_interfaces); config->mac_capabilities |= MAC_2500FD; fallthrough; case 1: /* It appears lane 1 only supports 1000base-X and SGMII */ __set_bit(PHY_INTERFACE_MODE_1000BASEX, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces); config->mac_capabilities |= MAC_1000FD; break; default: break; } } EXPORT_SYMBOL(b53_serdes_phylink_get_caps); struct phylink_pcs *b53_serdes_phylink_mac_select_pcs(struct b53_device *dev, int port, phy_interface_t interface) { u8 lane = b53_serdes_map_lane(dev, port); if (lane == B53_INVALID_LANE || lane >= B53_N_PCS || !dev->pcs[lane].dev) return NULL; if (!phy_interface_mode_is_8023z(interface) && interface != PHY_INTERFACE_MODE_SGMII) return NULL; return &dev->pcs[lane].pcs; } EXPORT_SYMBOL(b53_serdes_phylink_mac_select_pcs); int b53_serdes_init(struct b53_device *dev, int port) { u8 lane = b53_serdes_map_lane(dev, port); struct b53_pcs *pcs; u16 id0, msb, lsb; if (lane == B53_INVALID_LANE) return -EINVAL; id0 = b53_serdes_read(dev, lane, B53_SERDES_ID0, SERDES_ID0); msb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID1), SERDES_MII_BLK); lsb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID2), SERDES_MII_BLK); if (id0 == 0 || id0 == 0xffff) { dev_err(dev->dev, "SerDes not initialized, check settings\n"); return -ENODEV; } dev_info(dev->dev, "SerDes lane %d, model: %d, rev %c%d (OUI: 0x%08x)\n", lane, id0 & SERDES_ID0_MODEL_MASK, (id0 >> SERDES_ID0_REV_LETTER_SHIFT) + 0x41, (id0 >> SERDES_ID0_REV_NUM_SHIFT) & SERDES_ID0_REV_NUM_MASK, (u32)msb << 16 | lsb); pcs = &dev->pcs[lane]; pcs->dev = dev; pcs->lane = lane; pcs->pcs.ops = &b53_pcs_ops; return 0; } EXPORT_SYMBOL(b53_serdes_init); MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>"); MODULE_DESCRIPTION("B53 Switch SerDes driver"); MODULE_LICENSE("Dual BSD/GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1