| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Rasesh Mody | 1625 | 98.66% | 2 | 50.00% |
| Jing Huang | 20 | 1.21% | 1 | 25.00% |
| Thomas Gleixner | 2 | 0.12% | 1 | 25.00% |
| Total | 1647 | 4 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Linux network driver for QLogic BR-series Converged Network Adapter. */ /* * Copyright (c) 2005-2014 Brocade Communications Systems, Inc. * Copyright (c) 2014-2015 QLogic Corporation * All rights reserved * www.qlogic.com */ /* * bfi_reg.h ASIC register defines for all QLogic BR-series adapter ASICs */ #ifndef __BFI_REG_H__ #define __BFI_REG_H__ #define HOSTFN0_INT_STATUS 0x00014000 /* cb/ct */ #define HOSTFN1_INT_STATUS 0x00014100 /* cb/ct */ #define HOSTFN2_INT_STATUS 0x00014300 /* ct */ #define HOSTFN3_INT_STATUS 0x00014400 /* ct */ #define HOSTFN0_INT_MSK 0x00014004 /* cb/ct */ #define HOSTFN1_INT_MSK 0x00014104 /* cb/ct */ #define HOSTFN2_INT_MSK 0x00014304 /* ct */ #define HOSTFN3_INT_MSK 0x00014404 /* ct */ #define HOST_PAGE_NUM_FN0 0x00014008 /* cb/ct */ #define HOST_PAGE_NUM_FN1 0x00014108 /* cb/ct */ #define HOST_PAGE_NUM_FN2 0x00014308 /* ct */ #define HOST_PAGE_NUM_FN3 0x00014408 /* ct */ #define APP_PLL_LCLK_CTL_REG 0x00014204 /* cb/ct */ #define __P_LCLK_PLL_LOCK 0x80000000 #define __APP_PLL_LCLK_SRAM_USE_100MHZ 0x00100000 #define __APP_PLL_LCLK_RESET_TIMER_MK 0x000e0000 #define __APP_PLL_LCLK_RESET_TIMER_SH 17 #define __APP_PLL_LCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_LCLK_RESET_TIMER_SH) #define __APP_PLL_LCLK_LOGIC_SOFT_RESET 0x00010000 #define __APP_PLL_LCLK_CNTLMT0_1_MK 0x0000c000 #define __APP_PLL_LCLK_CNTLMT0_1_SH 14 #define __APP_PLL_LCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_LCLK_CNTLMT0_1_SH) #define __APP_PLL_LCLK_JITLMT0_1_MK 0x00003000 #define __APP_PLL_LCLK_JITLMT0_1_SH 12 #define __APP_PLL_LCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_LCLK_JITLMT0_1_SH) #define __APP_PLL_LCLK_HREF 0x00000800 #define __APP_PLL_LCLK_HDIV 0x00000400 #define __APP_PLL_LCLK_P0_1_MK 0x00000300 #define __APP_PLL_LCLK_P0_1_SH 8 #define __APP_PLL_LCLK_P0_1(_v) ((_v) << __APP_PLL_LCLK_P0_1_SH) #define __APP_PLL_LCLK_Z0_2_MK 0x000000e0 #define __APP_PLL_LCLK_Z0_2_SH 5 #define __APP_PLL_LCLK_Z0_2(_v) ((_v) << __APP_PLL_LCLK_Z0_2_SH) #define __APP_PLL_LCLK_RSEL200500 0x00000010 #define __APP_PLL_LCLK_ENARST 0x00000008 #define __APP_PLL_LCLK_BYPASS 0x00000004 #define __APP_PLL_LCLK_LRESETN 0x00000002 #define __APP_PLL_LCLK_ENABLE 0x00000001 #define APP_PLL_SCLK_CTL_REG 0x00014208 /* cb/ct */ #define __P_SCLK_PLL_LOCK 0x80000000 #define __APP_PLL_SCLK_RESET_TIMER_MK 0x000e0000 #define __APP_PLL_SCLK_RESET_TIMER_SH 17 #define __APP_PLL_SCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_SCLK_RESET_TIMER_SH) #define __APP_PLL_SCLK_LOGIC_SOFT_RESET 0x00010000 #define __APP_PLL_SCLK_CNTLMT0_1_MK 0x0000c000 #define __APP_PLL_SCLK_CNTLMT0_1_SH 14 #define __APP_PLL_SCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_SCLK_CNTLMT0_1_SH) #define __APP_PLL_SCLK_JITLMT0_1_MK 0x00003000 #define __APP_PLL_SCLK_JITLMT0_1_SH 12 #define __APP_PLL_SCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_SCLK_JITLMT0_1_SH) #define __APP_PLL_SCLK_HREF 0x00000800 #define __APP_PLL_SCLK_HDIV 0x00000400 #define __APP_PLL_SCLK_P0_1_MK 0x00000300 #define __APP_PLL_SCLK_P0_1_SH 8 #define __APP_PLL_SCLK_P0_1(_v) ((_v) << __APP_PLL_SCLK_P0_1_SH) #define __APP_PLL_SCLK_Z0_2_MK 0x000000e0 #define __APP_PLL_SCLK_Z0_2_SH 5 #define __APP_PLL_SCLK_Z0_2(_v) ((_v) << __APP_PLL_SCLK_Z0_2_SH) #define __APP_PLL_SCLK_RSEL200500 0x00000010 #define __APP_PLL_SCLK_ENARST 0x00000008 #define __APP_PLL_SCLK_BYPASS 0x00000004 #define __APP_PLL_SCLK_LRESETN 0x00000002 #define __APP_PLL_SCLK_ENABLE 0x00000001 #define __ENABLE_MAC_AHB_1 0x00800000 /* ct */ #define __ENABLE_MAC_AHB_0 0x00400000 /* ct */ #define __ENABLE_MAC_1 0x00200000 /* ct */ #define __ENABLE_MAC_0 0x00100000 /* ct */ #define HOST_SEM0_REG 0x00014230 /* cb/ct */ #define HOST_SEM1_REG 0x00014234 /* cb/ct */ #define HOST_SEM2_REG 0x00014238 /* cb/ct */ #define HOST_SEM3_REG 0x0001423c /* cb/ct */ #define HOST_SEM4_REG 0x00014610 /* cb/ct */ #define HOST_SEM5_REG 0x00014614 /* cb/ct */ #define HOST_SEM6_REG 0x00014618 /* cb/ct */ #define HOST_SEM7_REG 0x0001461c /* cb/ct */ #define HOST_SEM0_INFO_REG 0x00014240 /* cb/ct */ #define HOST_SEM1_INFO_REG 0x00014244 /* cb/ct */ #define HOST_SEM2_INFO_REG 0x00014248 /* cb/ct */ #define HOST_SEM3_INFO_REG 0x0001424c /* cb/ct */ #define HOST_SEM4_INFO_REG 0x00014620 /* cb/ct */ #define HOST_SEM5_INFO_REG 0x00014624 /* cb/ct */ #define HOST_SEM6_INFO_REG 0x00014628 /* cb/ct */ #define HOST_SEM7_INFO_REG 0x0001462c /* cb/ct */ #define HOSTFN0_LPU0_CMD_STAT 0x00019000 /* cb/ct */ #define HOSTFN0_LPU1_CMD_STAT 0x00019004 /* cb/ct */ #define HOSTFN1_LPU0_CMD_STAT 0x00019010 /* cb/ct */ #define HOSTFN1_LPU1_CMD_STAT 0x00019014 /* cb/ct */ #define HOSTFN2_LPU0_CMD_STAT 0x00019150 /* ct */ #define HOSTFN2_LPU1_CMD_STAT 0x00019154 /* ct */ #define HOSTFN3_LPU0_CMD_STAT 0x00019160 /* ct */ #define HOSTFN3_LPU1_CMD_STAT 0x00019164 /* ct */ #define LPU0_HOSTFN0_CMD_STAT 0x00019008 /* cb/ct */ #define LPU1_HOSTFN0_CMD_STAT 0x0001900c /* cb/ct */ #define LPU0_HOSTFN1_CMD_STAT 0x00019018 /* cb/ct */ #define LPU1_HOSTFN1_CMD_STAT 0x0001901c /* cb/ct */ #define LPU0_HOSTFN2_CMD_STAT 0x00019158 /* ct */ #define LPU1_HOSTFN2_CMD_STAT 0x0001915c /* ct */ #define LPU0_HOSTFN3_CMD_STAT 0x00019168 /* ct */ #define LPU1_HOSTFN3_CMD_STAT 0x0001916c /* ct */ #define PSS_CTL_REG 0x00018800 /* cb/ct */ #define __PSS_I2C_CLK_DIV_MK 0x007f0000 #define __PSS_I2C_CLK_DIV_SH 16 #define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH) #define __PSS_LMEM_INIT_DONE 0x00001000 #define __PSS_LMEM_RESET 0x00000200 #define __PSS_LMEM_INIT_EN 0x00000100 #define __PSS_LPU1_RESET 0x00000002 #define __PSS_LPU0_RESET 0x00000001 #define PSS_ERR_STATUS_REG 0x00018810 /* cb/ct */ #define ERR_SET_REG 0x00018818 /* cb/ct */ #define PSS_GPIO_OUT_REG 0x000188c0 /* cb/ct */ #define __PSS_GPIO_OUT_REG 0x00000fff #define PSS_GPIO_OE_REG 0x000188c8 /* cb/ct */ #define __PSS_GPIO_OE_REG 0x000000ff #define HOSTFN0_LPU_MBOX0_0 0x00019200 /* cb/ct */ #define HOSTFN1_LPU_MBOX0_8 0x00019260 /* cb/ct */ #define LPU_HOSTFN0_MBOX0_0 0x00019280 /* cb/ct */ #define LPU_HOSTFN1_MBOX0_8 0x000192e0 /* cb/ct */ #define HOSTFN2_LPU_MBOX0_0 0x00019400 /* ct */ #define HOSTFN3_LPU_MBOX0_8 0x00019460 /* ct */ #define LPU_HOSTFN2_MBOX0_0 0x00019480 /* ct */ #define LPU_HOSTFN3_MBOX0_8 0x000194e0 /* ct */ #define HOST_MSIX_ERR_INDEX_FN0 0x0001400c /* ct */ #define HOST_MSIX_ERR_INDEX_FN1 0x0001410c /* ct */ #define HOST_MSIX_ERR_INDEX_FN2 0x0001430c /* ct */ #define HOST_MSIX_ERR_INDEX_FN3 0x0001440c /* ct */ #define MBIST_CTL_REG 0x00014220 /* ct */ #define __EDRAM_BISTR_START 0x00000004 #define MBIST_STAT_REG 0x00014224 /* ct */ #define ETH_MAC_SER_REG 0x00014288 /* ct */ #define __APP_EMS_CKBUFAMPIN 0x00000020 #define __APP_EMS_REFCLKSEL 0x00000010 #define __APP_EMS_CMLCKSEL 0x00000008 #define __APP_EMS_REFCKBUFEN2 0x00000004 #define __APP_EMS_REFCKBUFEN1 0x00000002 #define __APP_EMS_CHANNEL_SEL 0x00000001 #define FNC_PERS_REG 0x00014604 /* ct */ #define __F3_FUNCTION_ACTIVE 0x80000000 #define __F3_FUNCTION_MODE 0x40000000 #define __F3_PORT_MAP_MK 0x30000000 #define __F3_PORT_MAP_SH 28 #define __F3_PORT_MAP(_v) ((_v) << __F3_PORT_MAP_SH) #define __F3_VM_MODE 0x08000000 #define __F3_INTX_STATUS_MK 0x07000000 #define __F3_INTX_STATUS_SH 24 #define __F3_INTX_STATUS(_v) ((_v) << __F3_INTX_STATUS_SH) #define __F2_FUNCTION_ACTIVE 0x00800000 #define __F2_FUNCTION_MODE 0x00400000 #define __F2_PORT_MAP_MK 0x00300000 #define __F2_PORT_MAP_SH 20 #define __F2_PORT_MAP(_v) ((_v) << __F2_PORT_MAP_SH) #define __F2_VM_MODE 0x00080000 #define __F2_INTX_STATUS_MK 0x00070000 #define __F2_INTX_STATUS_SH 16 #define __F2_INTX_STATUS(_v) ((_v) << __F2_INTX_STATUS_SH) #define __F1_FUNCTION_ACTIVE 0x00008000 #define __F1_FUNCTION_MODE 0x00004000 #define __F1_PORT_MAP_MK 0x00003000 #define __F1_PORT_MAP_SH 12 #define __F1_PORT_MAP(_v) ((_v) << __F1_PORT_MAP_SH) #define __F1_VM_MODE 0x00000800 #define __F1_INTX_STATUS_MK 0x00000700 #define __F1_INTX_STATUS_SH 8 #define __F1_INTX_STATUS(_v) ((_v) << __F1_INTX_STATUS_SH) #define __F0_FUNCTION_ACTIVE 0x00000080 #define __F0_FUNCTION_MODE 0x00000040 #define __F0_PORT_MAP_MK 0x00000030 #define __F0_PORT_MAP_SH 4 #define __F0_PORT_MAP(_v) ((_v) << __F0_PORT_MAP_SH) #define __F0_VM_MODE 0x00000008 #define __F0_INTX_STATUS 0x00000007 enum { __F0_INTX_STATUS_MSIX = 0x0, __F0_INTX_STATUS_INTA = 0x1, __F0_INTX_STATUS_INTB = 0x2, __F0_INTX_STATUS_INTC = 0x3, __F0_INTX_STATUS_INTD = 0x4, }; #define OP_MODE 0x0001460c #define __APP_ETH_CLK_LOWSPEED 0x00000004 #define __GLOBAL_CORECLK_HALFSPEED 0x00000002 #define __GLOBAL_FCOE_MODE 0x00000001 #define FW_INIT_HALT_P0 0x000191ac #define __FW_INIT_HALT_P 0x00000001 #define FW_INIT_HALT_P1 0x000191bc #define PMM_1T_RESET_REG_P0 0x0002381c #define __PMM_1T_RESET_P 0x00000001 #define PMM_1T_RESET_REG_P1 0x00023c1c /* QLogic BR-series 1860 Adapter specific defines */ #define CT2_PCI_CPQ_BASE 0x00030000 #define CT2_PCI_APP_BASE 0x00030100 #define CT2_PCI_ETH_BASE 0x00030400 /* * APP block registers */ #define CT2_HOSTFN_INT_STATUS (CT2_PCI_APP_BASE + 0x00) #define CT2_HOSTFN_INTR_MASK (CT2_PCI_APP_BASE + 0x04) #define CT2_HOSTFN_PERSONALITY0 (CT2_PCI_APP_BASE + 0x08) #define __PME_STATUS_ 0x00200000 #define __PF_VF_BAR_SIZE_MODE__MK 0x00180000 #define __PF_VF_BAR_SIZE_MODE__SH 19 #define __PF_VF_BAR_SIZE_MODE_(_v) ((_v) << __PF_VF_BAR_SIZE_MODE__SH) #define __FC_LL_PORT_MAP__MK 0x00060000 #define __FC_LL_PORT_MAP__SH 17 #define __FC_LL_PORT_MAP_(_v) ((_v) << __FC_LL_PORT_MAP__SH) #define __PF_VF_ACTIVE_ 0x00010000 #define __PF_VF_CFG_RDY_ 0x00008000 #define __PF_VF_ENABLE_ 0x00004000 #define __PF_DRIVER_ACTIVE_ 0x00002000 #define __PF_PME_SEND_ENABLE_ 0x00001000 #define __PF_EXROM_OFFSET__MK 0x00000ff0 #define __PF_EXROM_OFFSET__SH 4 #define __PF_EXROM_OFFSET_(_v) ((_v) << __PF_EXROM_OFFSET__SH) #define __FC_LL_MODE_ 0x00000008 #define __PF_INTX_PIN_ 0x00000007 #define CT2_HOSTFN_PERSONALITY1 (CT2_PCI_APP_BASE + 0x0C) #define __PF_NUM_QUEUES1__MK 0xff000000 #define __PF_NUM_QUEUES1__SH 24 #define __PF_NUM_QUEUES1_(_v) ((_v) << __PF_NUM_QUEUES1__SH) #define __PF_VF_QUE_OFFSET1__MK 0x00ff0000 #define __PF_VF_QUE_OFFSET1__SH 16 #define __PF_VF_QUE_OFFSET1_(_v) ((_v) << __PF_VF_QUE_OFFSET1__SH) #define __PF_VF_NUM_QUEUES__MK 0x0000ff00 #define __PF_VF_NUM_QUEUES__SH 8 #define __PF_VF_NUM_QUEUES_(_v) ((_v) << __PF_VF_NUM_QUEUES__SH) #define __PF_VF_QUE_OFFSET_ 0x000000ff #define CT2_HOSTFN_PAGE_NUM (CT2_PCI_APP_BASE + 0x18) #define CT2_HOSTFN_MSIX_VT_INDEX_MBOX_ERR (CT2_PCI_APP_BASE + 0x38) /* * QLogic BR-series 1860 adapter CPQ block registers */ #define CT2_HOSTFN_LPU0_MBOX0 (CT2_PCI_CPQ_BASE + 0x00) #define CT2_HOSTFN_LPU1_MBOX0 (CT2_PCI_CPQ_BASE + 0x20) #define CT2_LPU0_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x40) #define CT2_LPU1_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x60) #define CT2_HOSTFN_LPU0_CMD_STAT (CT2_PCI_CPQ_BASE + 0x80) #define CT2_HOSTFN_LPU1_CMD_STAT (CT2_PCI_CPQ_BASE + 0x84) #define CT2_LPU0_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x88) #define CT2_LPU1_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x8c) #define CT2_HOSTFN_LPU0_READ_STAT (CT2_PCI_CPQ_BASE + 0x90) #define CT2_HOSTFN_LPU1_READ_STAT (CT2_PCI_CPQ_BASE + 0x94) #define CT2_LPU0_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x98) #define CT2_LPU1_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x9C) #define CT2_HOST_SEM0_REG 0x000148f0 #define CT2_HOST_SEM1_REG 0x000148f4 #define CT2_HOST_SEM2_REG 0x000148f8 #define CT2_HOST_SEM3_REG 0x000148fc #define CT2_HOST_SEM4_REG 0x00014900 #define CT2_HOST_SEM5_REG 0x00014904 #define CT2_HOST_SEM6_REG 0x00014908 #define CT2_HOST_SEM7_REG 0x0001490c #define CT2_HOST_SEM0_INFO_REG 0x000148b0 #define CT2_HOST_SEM1_INFO_REG 0x000148b4 #define CT2_HOST_SEM2_INFO_REG 0x000148b8 #define CT2_HOST_SEM3_INFO_REG 0x000148bc #define CT2_HOST_SEM4_INFO_REG 0x000148c0 #define CT2_HOST_SEM5_INFO_REG 0x000148c4 #define CT2_HOST_SEM6_INFO_REG 0x000148c8 #define CT2_HOST_SEM7_INFO_REG 0x000148cc #define CT2_APP_PLL_LCLK_CTL_REG 0x00014808 #define __APP_LPUCLK_HALFSPEED 0x40000000 #define __APP_PLL_LCLK_LOAD 0x20000000 #define __APP_PLL_LCLK_FBCNT_MK 0x1fe00000 #define __APP_PLL_LCLK_FBCNT_SH 21 #define __APP_PLL_LCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH) enum { __APP_PLL_LCLK_FBCNT_425_MHZ = 6, __APP_PLL_LCLK_FBCNT_468_MHZ = 4, }; #define __APP_PLL_LCLK_EXTFB 0x00000800 #define __APP_PLL_LCLK_ENOUTS 0x00000400 #define __APP_PLL_LCLK_RATE 0x00000010 #define CT2_APP_PLL_SCLK_CTL_REG 0x0001480c #define __P_SCLK_PLL_LOCK 0x80000000 #define __APP_PLL_SCLK_REFCLK_SEL 0x40000000 #define __APP_PLL_SCLK_CLK_DIV2 0x20000000 #define __APP_PLL_SCLK_LOAD 0x10000000 #define __APP_PLL_SCLK_FBCNT_MK 0x0ff00000 #define __APP_PLL_SCLK_FBCNT_SH 20 #define __APP_PLL_SCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH) enum { __APP_PLL_SCLK_FBCNT_NORM = 6, __APP_PLL_SCLK_FBCNT_10G_FC = 10, }; #define __APP_PLL_SCLK_EXTFB 0x00000800 #define __APP_PLL_SCLK_ENOUTS 0x00000400 #define __APP_PLL_SCLK_RATE 0x00000010 #define CT2_PCIE_MISC_REG 0x00014804 #define __ETH_CLK_ENABLE_PORT1 0x00000010 #define CT2_CHIP_MISC_PRG 0x000148a4 #define __ETH_CLK_ENABLE_PORT0 0x00004000 #define __APP_LPU_SPEED 0x00000002 #define CT2_MBIST_STAT_REG 0x00014818 #define CT2_MBIST_CTL_REG 0x0001481c #define CT2_PMM_1T_CONTROL_REG_P0 0x0002381c #define __PMM_1T_PNDB_P 0x00000002 #define CT2_PMM_1T_CONTROL_REG_P1 0x00023c1c #define CT2_WGN_STATUS 0x00014990 #define __A2T_AHB_LOAD 0x00000800 #define __WGN_READY 0x00000400 #define __GLBL_PF_VF_CFG_RDY 0x00000200 #define CT2_NFC_CSR_CLR_REG 0x00027420 #define CT2_NFC_CSR_SET_REG 0x00027424 #define __HALT_NFC_CONTROLLER 0x00000002 #define __NFC_CONTROLLER_HALTED 0x00001000 #define CT2_RSC_GPR15_REG 0x0002765c #define CT2_CSI_FW_CTL_REG 0x00027080 #define __RESET_AND_START_SCLK_LCLK_PLLS 0x00010000 #define CT2_CSI_FW_CTL_SET_REG 0x00027088 #define CT2_CSI_MAC0_CONTROL_REG 0x000270d0 #define __CSI_MAC_RESET 0x00000010 #define __CSI_MAC_AHB_RESET 0x00000008 #define CT2_CSI_MAC1_CONTROL_REG 0x000270d4 #define CT2_CSI_MAC_CONTROL_REG(__n) \ (CT2_CSI_MAC0_CONTROL_REG + \ (__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG)) /* * Name semaphore registers based on usage */ #define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG #define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG #define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG #define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG #define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG #define BFA_IOC_FAIL_SYNC HOST_SEM5_INFO_REG /* * CT2 semaphore register locations changed */ #define CT2_BFA_IOC0_HBEAT_REG CT2_HOST_SEM0_INFO_REG #define CT2_BFA_IOC0_STATE_REG CT2_HOST_SEM1_INFO_REG #define CT2_BFA_IOC1_HBEAT_REG CT2_HOST_SEM2_INFO_REG #define CT2_BFA_IOC1_STATE_REG CT2_HOST_SEM3_INFO_REG #define CT2_BFA_FW_USE_COUNT CT2_HOST_SEM4_INFO_REG #define CT2_BFA_IOC_FAIL_SYNC CT2_HOST_SEM5_INFO_REG #define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q)) #define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q)) /* * And corresponding host interrupt status bit field defines */ #define __HFN_INT_CPE_Q0 0x00000001U #define __HFN_INT_CPE_Q1 0x00000002U #define __HFN_INT_CPE_Q2 0x00000004U #define __HFN_INT_CPE_Q3 0x00000008U #define __HFN_INT_CPE_Q4 0x00000010U #define __HFN_INT_CPE_Q5 0x00000020U #define __HFN_INT_CPE_Q6 0x00000040U #define __HFN_INT_CPE_Q7 0x00000080U #define __HFN_INT_RME_Q0 0x00000100U #define __HFN_INT_RME_Q1 0x00000200U #define __HFN_INT_RME_Q2 0x00000400U #define __HFN_INT_RME_Q3 0x00000800U #define __HFN_INT_RME_Q4 0x00001000U #define __HFN_INT_RME_Q5 0x00002000U #define __HFN_INT_RME_Q6 0x00004000U #define __HFN_INT_RME_Q7 0x00008000U #define __HFN_INT_ERR_EMC 0x00010000U #define __HFN_INT_ERR_LPU0 0x00020000U #define __HFN_INT_ERR_LPU1 0x00040000U #define __HFN_INT_ERR_PSS 0x00080000U #define __HFN_INT_MBOX_LPU0 0x00100000U #define __HFN_INT_MBOX_LPU1 0x00200000U #define __HFN_INT_MBOX1_LPU0 0x00400000U #define __HFN_INT_MBOX1_LPU1 0x00800000U #define __HFN_INT_LL_HALT 0x01000000U #define __HFN_INT_CPE_MASK 0x000000ffU #define __HFN_INT_RME_MASK 0x0000ff00U #define __HFN_INT_ERR_MASK \ (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 | \ __HFN_INT_ERR_PSS | __HFN_INT_LL_HALT) #define __HFN_INT_FN0_MASK \ (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \ __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \ __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0) #define __HFN_INT_FN1_MASK \ (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \ __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \ __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1) /* * Host interrupt status defines for 1860 */ #define __HFN_INT_MBOX_LPU0_CT2 0x00010000U #define __HFN_INT_MBOX_LPU1_CT2 0x00020000U #define __HFN_INT_ERR_PSS_CT2 0x00040000U #define __HFN_INT_ERR_LPU0_CT2 0x00080000U #define __HFN_INT_ERR_LPU1_CT2 0x00100000U #define __HFN_INT_CPQ_HALT_CT2 0x00200000U #define __HFN_INT_ERR_WGN_CT2 0x00400000U #define __HFN_INT_ERR_LEHRX_CT2 0x00800000U #define __HFN_INT_ERR_LEHTX_CT2 0x01000000U #define __HFN_INT_ERR_MASK_CT2 \ (__HFN_INT_ERR_PSS_CT2 | __HFN_INT_ERR_LPU0_CT2 | \ __HFN_INT_ERR_LPU1_CT2 | __HFN_INT_CPQ_HALT_CT2 | \ __HFN_INT_ERR_WGN_CT2 | __HFN_INT_ERR_LEHRX_CT2 | \ __HFN_INT_ERR_LEHTX_CT2) #define __HFN_INT_FN0_MASK_CT2 \ (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \ __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \ __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0_CT2) #define __HFN_INT_FN1_MASK_CT2 \ (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \ __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \ __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1_CT2) /* * asic memory map. */ #define PSS_SMEM_PAGE_START 0x8000 #define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15)) #define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff) #endif /* __BFI_REG_H__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1