| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Grant C. Likely | 831 | 80.99% | 1 | 6.25% |
| Esben Haabendal | 120 | 11.70% | 10 | 62.50% |
| John Linn | 44 | 4.29% | 1 | 6.25% |
| huangjunxian | 15 | 1.46% | 1 | 6.25% |
| Brian Hill | 13 | 1.27% | 1 | 6.25% |
| Tom Rix | 2 | 0.19% | 1 | 6.25% |
| Greg Kroah-Hartman | 1 | 0.10% | 1 | 6.25% |
| Total | 1026 | 16 |
/* SPDX-License-Identifier: GPL-2.0 */ #ifndef XILINX_LL_TEMAC_H #define XILINX_LL_TEMAC_H #include <linux/netdevice.h> #include <linux/of.h> #include <linux/spinlock.h> #ifdef CONFIG_PPC_DCR #include <asm/dcr.h> #include <asm/dcr-regs.h> #endif /* packet size info */ #define XTE_HDR_SIZE 14 /* size of Ethernet header */ #define XTE_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */ #define XTE_JUMBO_MTU 9000 #define XTE_MAX_JUMBO_FRAME_SIZE (XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE) /* Configuration options */ /* Accept all incoming packets. * This option defaults to disabled (cleared) */ #define XTE_OPTION_PROMISC (1 << 0) /* Jumbo frame support for Tx & Rx. * This option defaults to disabled (cleared) */ #define XTE_OPTION_JUMBO (1 << 1) /* VLAN Rx & Tx frame support. * This option defaults to disabled (cleared) */ #define XTE_OPTION_VLAN (1 << 2) /* Enable recognition of flow control frames on Rx * This option defaults to enabled (set) */ #define XTE_OPTION_FLOW_CONTROL (1 << 4) /* Strip FCS and PAD from incoming frames. * Note: PAD from VLAN frames is not stripped. * This option defaults to disabled (set) */ #define XTE_OPTION_FCS_STRIP (1 << 5) /* Generate FCS field and add PAD automatically for outgoing frames. * This option defaults to enabled (set) */ #define XTE_OPTION_FCS_INSERT (1 << 6) /* Enable Length/Type error checking for incoming frames. When this option is * set, the MAC will filter frames that have a mismatched type/length field * and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these * types of frames are encountered. When this option is cleared, the MAC will * allow these types of frames to be received. * This option defaults to enabled (set) */ #define XTE_OPTION_LENTYPE_ERR (1 << 7) /* Enable the transmitter. * This option defaults to enabled (set) */ #define XTE_OPTION_TXEN (1 << 11) /* Enable the receiver * This option defaults to enabled (set) */ #define XTE_OPTION_RXEN (1 << 12) /* Default options set when device is initialized or reset */ #define XTE_OPTION_DEFAULTS \ (XTE_OPTION_TXEN | \ XTE_OPTION_FLOW_CONTROL | \ XTE_OPTION_RXEN) /* XPS_LL_TEMAC SDMA registers definition */ #define TX_NXTDESC_PTR 0x00 /* r */ #define TX_CURBUF_ADDR 0x01 /* r */ #define TX_CURBUF_LENGTH 0x02 /* r */ #define TX_CURDESC_PTR 0x03 /* rw */ #define TX_TAILDESC_PTR 0x04 /* rw */ #define TX_CHNL_CTRL 0x05 /* rw */ /* * 0:7 24:31 IRQTimeout * 8:15 16:23 IRQCount * 16:20 11:15 Reserved * 21 10 0 * 22 9 UseIntOnEnd * 23 8 LdIRQCnt * 24 7 IRQEn * 25:28 3:6 Reserved * 29 2 IrqErrEn * 30 1 IrqDlyEn * 31 0 IrqCoalEn */ #define CHNL_CTRL_IRQ_IOE (1 << 9) #define CHNL_CTRL_IRQ_EN (1 << 7) #define CHNL_CTRL_IRQ_ERR_EN (1 << 2) #define CHNL_CTRL_IRQ_DLY_EN (1 << 1) #define CHNL_CTRL_IRQ_COAL_EN (1 << 0) #define TX_IRQ_REG 0x06 /* rw */ /* * 0:7 24:31 DltTmrValue * 8:15 16:23 ClscCntrValue * 16:17 14:15 Reserved * 18:21 10:13 ClscCnt * 22:23 8:9 DlyCnt * 24:28 3::7 Reserved * 29 2 ErrIrq * 30 1 DlyIrq * 31 0 CoalIrq */ #define TX_CHNL_STS 0x07 /* r */ /* * 0:9 22:31 Reserved * 10 21 TailPErr * 11 20 CmpErr * 12 19 AddrErr * 13 18 NxtPErr * 14 17 CurPErr * 15 16 BsyWr * 16:23 8:15 Reserved * 24 7 Error * 25 6 IOE * 26 5 SOE * 27 4 Cmplt * 28 3 SOP * 29 2 EOP * 30 1 EngBusy * 31 0 Reserved */ #define RX_NXTDESC_PTR 0x08 /* r */ #define RX_CURBUF_ADDR 0x09 /* r */ #define RX_CURBUF_LENGTH 0x0a /* r */ #define RX_CURDESC_PTR 0x0b /* rw */ #define RX_TAILDESC_PTR 0x0c /* rw */ #define RX_CHNL_CTRL 0x0d /* rw */ /* * 0:7 24:31 IRQTimeout * 8:15 16:23 IRQCount * 16:20 11:15 Reserved * 21 10 0 * 22 9 UseIntOnEnd * 23 8 LdIRQCnt * 24 7 IRQEn * 25:28 3:6 Reserved * 29 2 IrqErrEn * 30 1 IrqDlyEn * 31 0 IrqCoalEn */ #define RX_IRQ_REG 0x0e /* rw */ #define IRQ_COAL (1 << 0) #define IRQ_DLY (1 << 1) #define IRQ_ERR (1 << 2) #define IRQ_DMAERR (1 << 7) /* this is not documented ??? */ /* * 0:7 24:31 DltTmrValue * 8:15 16:23 ClscCntrValue * 16:17 14:15 Reserved * 18:21 10:13 ClscCnt * 22:23 8:9 DlyCnt * 24:28 3::7 Reserved */ #define RX_CHNL_STS 0x0f /* r */ #define CHNL_STS_ENGBUSY (1 << 1) #define CHNL_STS_EOP (1 << 2) #define CHNL_STS_SOP (1 << 3) #define CHNL_STS_CMPLT (1 << 4) #define CHNL_STS_SOE (1 << 5) #define CHNL_STS_IOE (1 << 6) #define CHNL_STS_ERR (1 << 7) #define CHNL_STS_BSYWR (1 << 16) #define CHNL_STS_CURPERR (1 << 17) #define CHNL_STS_NXTPERR (1 << 18) #define CHNL_STS_ADDRERR (1 << 19) #define CHNL_STS_CMPERR (1 << 20) #define CHNL_STS_TAILERR (1 << 21) /* * 0:9 22:31 Reserved * 10 21 TailPErr * 11 20 CmpErr * 12 19 AddrErr * 13 18 NxtPErr * 14 17 CurPErr * 15 16 BsyWr * 16:23 8:15 Reserved * 24 7 Error * 25 6 IOE * 26 5 SOE * 27 4 Cmplt * 28 3 SOP * 29 2 EOP * 30 1 EngBusy * 31 0 Reserved */ #define DMA_CONTROL_REG 0x10 /* rw */ #define DMA_CONTROL_RST (1 << 0) #define DMA_TAIL_ENABLE (1 << 2) /* XPS_LL_TEMAC direct registers definition */ #define XTE_RAF0_OFFSET 0x00 #define RAF0_RST (1 << 0) #define RAF0_MCSTREJ (1 << 1) #define RAF0_BCSTREJ (1 << 2) #define XTE_TPF0_OFFSET 0x04 #define XTE_IFGP0_OFFSET 0x08 #define XTE_ISR0_OFFSET 0x0c #define ISR0_HARDACSCMPLT (1 << 0) #define ISR0_AUTONEG (1 << 1) #define ISR0_RXCMPLT (1 << 2) #define ISR0_RXREJ (1 << 3) #define ISR0_RXFIFOOVR (1 << 4) #define ISR0_TXCMPLT (1 << 5) #define ISR0_RXDCMLCK (1 << 6) #define XTE_IPR0_OFFSET 0x10 #define XTE_IER0_OFFSET 0x14 #define XTE_MSW0_OFFSET 0x20 #define XTE_LSW0_OFFSET 0x24 #define XTE_CTL0_OFFSET 0x28 #define XTE_RDY0_OFFSET 0x2c #define XTE_RSE_MIIM_RR_MASK 0x0002 #define XTE_RSE_MIIM_WR_MASK 0x0004 #define XTE_RSE_CFG_RR_MASK 0x0020 #define XTE_RSE_CFG_WR_MASK 0x0040 #define XTE_RDY0_HARD_ACS_RDY_MASK (0x10000) /* XPS_LL_TEMAC indirect registers offset definition */ #define XTE_RXC0_OFFSET 0x00000200 /* Rx configuration word 0 */ #define XTE_RXC1_OFFSET 0x00000240 /* Rx configuration word 1 */ #define XTE_RXC1_RXRST_MASK (1 << 31) /* Receiver reset */ #define XTE_RXC1_RXJMBO_MASK (1 << 30) /* Jumbo frame enable */ #define XTE_RXC1_RXFCS_MASK (1 << 29) /* FCS not stripped */ #define XTE_RXC1_RXEN_MASK (1 << 28) /* Receiver enable */ #define XTE_RXC1_RXVLAN_MASK (1 << 27) /* VLAN enable */ #define XTE_RXC1_RXHD_MASK (1 << 26) /* Half duplex */ #define XTE_RXC1_RXLT_MASK (1 << 25) /* Length/type check disable */ #define XTE_TXC_OFFSET 0x00000280 /* Tx configuration */ #define XTE_TXC_TXRST_MASK (1 << 31) /* Transmitter reset */ #define XTE_TXC_TXJMBO_MASK (1 << 30) /* Jumbo frame enable */ #define XTE_TXC_TXFCS_MASK (1 << 29) /* Generate FCS */ #define XTE_TXC_TXEN_MASK (1 << 28) /* Transmitter enable */ #define XTE_TXC_TXVLAN_MASK (1 << 27) /* VLAN enable */ #define XTE_TXC_TXHD_MASK (1 << 26) /* Half duplex */ #define XTE_FCC_OFFSET 0x000002C0 /* Flow control config */ #define XTE_FCC_RXFLO_MASK (1 << 29) /* Rx flow control enable */ #define XTE_FCC_TXFLO_MASK (1 << 30) /* Tx flow control enable */ #define XTE_EMCFG_OFFSET 0x00000300 /* EMAC configuration */ #define XTE_EMCFG_LINKSPD_MASK 0xC0000000 /* Link speed */ #define XTE_EMCFG_HOSTEN_MASK (1 << 26) /* Host interface enable */ #define XTE_EMCFG_LINKSPD_10 0x00000000 /* 10 Mbit LINKSPD_MASK */ #define XTE_EMCFG_LINKSPD_100 (1 << 30) /* 100 Mbit LINKSPD_MASK */ #define XTE_EMCFG_LINKSPD_1000 (1 << 31) /* 1000 Mbit LINKSPD_MASK */ #define XTE_GMIC_OFFSET 0x00000320 /* RGMII/SGMII config */ #define XTE_MC_OFFSET 0x00000340 /* MDIO configuration */ #define XTE_UAW0_OFFSET 0x00000380 /* Unicast address word 0 */ #define XTE_UAW1_OFFSET 0x00000384 /* Unicast address word 1 */ #define XTE_MAW0_OFFSET 0x00000388 /* Multicast addr word 0 */ #define XTE_MAW1_OFFSET 0x0000038C /* Multicast addr word 1 */ #define XTE_AFM_OFFSET 0x00000390 /* Promiscuous mode */ #define XTE_AFM_EPPRM_MASK (1 << 31) /* Promiscuous mode enable */ /* Interrupt Request status */ #define XTE_TIS_OFFSET 0x000003A0 #define TIS_FRIS (1 << 0) #define TIS_MRIS (1 << 1) #define TIS_MWIS (1 << 2) #define TIS_ARIS (1 << 3) #define TIS_AWIS (1 << 4) #define TIS_CRIS (1 << 5) #define TIS_CWIS (1 << 6) #define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */ /* MII Management Control register (MGTCR) */ #define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */ #define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */ #define CNTLREG_WRITE_ENABLE_MASK 0x8000 #define CNTLREG_EMAC1SEL_MASK 0x0400 #define CNTLREG_ADDRESSCODE_MASK 0x03ff /* CDMAC descriptor status bit definitions */ #define STS_CTRL_APP0_ERR (1 << 31) #define STS_CTRL_APP0_IRQONEND (1 << 30) /* undocumented */ #define STS_CTRL_APP0_STOPONEND (1 << 29) #define STS_CTRL_APP0_CMPLT (1 << 28) #define STS_CTRL_APP0_SOP (1 << 27) #define STS_CTRL_APP0_EOP (1 << 26) #define STS_CTRL_APP0_ENGBUSY (1 << 25) /* undocumented */ #define STS_CTRL_APP0_ENGRST (1 << 24) #define TX_CONTROL_CALC_CSUM_MASK 1 #define MULTICAST_CAM_TABLE_NUM 4 /* TEMAC Synthesis features */ #define TEMAC_FEATURE_RX_CSUM (1 << 0) #define TEMAC_FEATURE_TX_CSUM (1 << 1) /* TX/RX CURDESC_PTR points to first descriptor */ /* TX/RX TAILDESC_PTR points to last descriptor in linked list */ /** * struct cdmac_bd - LocalLink buffer descriptor format * * app0 bits: * 0 Error * 1 IrqOnEnd generate an interrupt at completion of DMA op * 2 reserved * 3 completed Current descriptor completed * 4 SOP TX - marks first desc/ RX marks first desct * 5 EOP TX marks last desc/RX marks last desc * 6 EngBusy DMA is processing * 7 reserved * 8:31 application specific */ struct cdmac_bd { u32 next; /* Physical address of next buffer descriptor */ u32 phys; u32 len; u32 app0; u32 app1; /* TX start << 16 | insert */ u32 app2; /* TX csum */ u32 app3; u32 app4; /* skb for TX length for RX */ }; struct temac_local { struct net_device *ndev; struct device *dev; /* Connection to PHY device */ struct device_node *phy_node; /* For non-device-tree devices */ char phy_name[MII_BUS_ID_SIZE + 3]; phy_interface_t phy_interface; /* MDIO bus data */ struct mii_bus *mii_bus; /* MII bus reference */ /* IO registers, dma functions and IRQs */ void __iomem *regs; void __iomem *sdma_regs; #ifdef CONFIG_PPC_DCR dcr_host_t sdma_dcrs; #endif u32 (*temac_ior)(struct temac_local *lp, int offset); void (*temac_iow)(struct temac_local *lp, int offset, u32 value); u32 (*dma_in)(struct temac_local *lp, int reg); void (*dma_out)(struct temac_local *lp, int reg, u32 value); int tx_irq; int rx_irq; int emac_num; struct sk_buff **rx_skb; spinlock_t rx_lock; /* For synchronization of indirect register access. Must be * shared mutex between interfaces in same TEMAC block. */ spinlock_t *indirect_lock; u32 options; /* Current options word */ int last_link; unsigned int temac_features; /* Buffer descriptors */ struct cdmac_bd *tx_bd_v; dma_addr_t tx_bd_p; u32 tx_bd_num; struct cdmac_bd *rx_bd_v; dma_addr_t rx_bd_p; u32 rx_bd_num; int tx_bd_ci; int tx_bd_tail; int rx_bd_ci; int rx_bd_tail; /* DMA channel control setup */ u8 coalesce_count_tx; u8 coalesce_delay_tx; u8 coalesce_count_rx; u8 coalesce_delay_rx; struct delayed_work restart_work; }; /* Wrappers for temac_ior()/temac_iow() function pointers above */ #define temac_ior(lp, o) ((lp)->temac_ior(lp, o)) #define temac_iow(lp, o, v) ((lp)->temac_iow(lp, o, v)) /* xilinx_temac.c */ int temac_indirect_busywait(struct temac_local *lp); u32 temac_indirect_in32(struct temac_local *lp, int reg); u32 temac_indirect_in32_locked(struct temac_local *lp, int reg); void temac_indirect_out32(struct temac_local *lp, int reg, u32 value); void temac_indirect_out32_locked(struct temac_local *lp, int reg, u32 value); /* xilinx_temac_mdio.c */ int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev); void temac_mdio_teardown(struct temac_local *lp); #endif /* XILINX_LL_TEMAC_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1