| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Ivo van Doorn | 1353 | 95.75% | 11 | 52.38% |
| Gertjan van Wingerde | 54 | 3.82% | 5 | 23.81% |
| Thomas Gleixner | 2 | 0.14% | 1 | 4.76% |
| Luis Correia | 1 | 0.07% | 1 | 4.76% |
| André Goddard Rosa | 1 | 0.07% | 1 | 4.76% |
| Adrien Schildknecht | 1 | 0.07% | 1 | 4.76% |
| Jason A. Donenfeld | 1 | 0.07% | 1 | 4.76% |
| Total | 1413 | 21 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ /* Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> */ /* Module: rt2500usb Abstract: Data structures and registers for the rt2500usb module. Supported chipsets: RT2570. */ #ifndef RT2500USB_H #define RT2500USB_H /* * RF chip defines. */ #define RF2522 0x0000 #define RF2523 0x0001 #define RF2524 0x0002 #define RF2525 0x0003 #define RF2525E 0x0005 #define RF5222 0x0010 /* * RT2570 version */ #define RT2570_VERSION_B 2 #define RT2570_VERSION_C 3 #define RT2570_VERSION_D 4 /* * Signal information. * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 120 /* * Register layout information. */ #define CSR_REG_BASE 0x0400 #define CSR_REG_SIZE 0x0100 #define EEPROM_BASE 0x0000 #define EEPROM_SIZE 0x006e #define BBP_BASE 0x0000 #define BBP_SIZE 0x0060 #define RF_BASE 0x0004 #define RF_SIZE 0x0010 /* * Number of TX queues. */ #define NUM_TX_QUEUES 2 /* * Control/Status Registers(CSR). * Some values are set in TU, whereas 1 TU == 1024 us. */ /* * MAC_CSR0: ASIC revision number. */ #define MAC_CSR0 0x0400 /* * MAC_CSR1: System control. * SOFT_RESET: Software reset, 1: reset, 0: normal. * BBP_RESET: Hardware reset, 1: reset, 0, release. * HOST_READY: Host ready after initialization. */ #define MAC_CSR1 0x0402 #define MAC_CSR1_SOFT_RESET FIELD16(0x00000001) #define MAC_CSR1_BBP_RESET FIELD16(0x00000002) #define MAC_CSR1_HOST_READY FIELD16(0x00000004) /* * MAC_CSR2: STA MAC register 0. */ #define MAC_CSR2 0x0404 #define MAC_CSR2_BYTE0 FIELD16(0x00ff) #define MAC_CSR2_BYTE1 FIELD16(0xff00) /* * MAC_CSR3: STA MAC register 1. */ #define MAC_CSR3 0x0406 #define MAC_CSR3_BYTE2 FIELD16(0x00ff) #define MAC_CSR3_BYTE3 FIELD16(0xff00) /* * MAC_CSR4: STA MAC register 2. */ #define MAC_CSR4 0X0408 #define MAC_CSR4_BYTE4 FIELD16(0x00ff) #define MAC_CSR4_BYTE5 FIELD16(0xff00) /* * MAC_CSR5: BSSID register 0. */ #define MAC_CSR5 0x040a #define MAC_CSR5_BYTE0 FIELD16(0x00ff) #define MAC_CSR5_BYTE1 FIELD16(0xff00) /* * MAC_CSR6: BSSID register 1. */ #define MAC_CSR6 0x040c #define MAC_CSR6_BYTE2 FIELD16(0x00ff) #define MAC_CSR6_BYTE3 FIELD16(0xff00) /* * MAC_CSR7: BSSID register 2. */ #define MAC_CSR7 0x040e #define MAC_CSR7_BYTE4 FIELD16(0x00ff) #define MAC_CSR7_BYTE5 FIELD16(0xff00) /* * MAC_CSR8: Max frame length. */ #define MAC_CSR8 0x0410 #define MAC_CSR8_MAX_FRAME_UNIT FIELD16(0x0fff) /* * Misc MAC_CSR registers. * MAC_CSR9: Timer control. * MAC_CSR10: Slot time. * MAC_CSR11: SIFS. * MAC_CSR12: EIFS. * MAC_CSR13: Power mode0. * MAC_CSR14: Power mode1. * MAC_CSR15: Power saving transition0 * MAC_CSR16: Power saving transition1 */ #define MAC_CSR9 0x0412 #define MAC_CSR10 0x0414 #define MAC_CSR11 0x0416 #define MAC_CSR12 0x0418 #define MAC_CSR13 0x041a #define MAC_CSR14 0x041c #define MAC_CSR15 0x041e #define MAC_CSR16 0x0420 /* * MAC_CSR17: Manual power control / status register. * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. * SET_STATE: Set state. Write 1 to trigger, self cleared. * BBP_DESIRE_STATE: BBP desired state. * RF_DESIRE_STATE: RF desired state. * BBP_CURRENT_STATE: BBP current state. * RF_CURRENT_STATE: RF current state. * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. */ #define MAC_CSR17 0x0422 #define MAC_CSR17_SET_STATE FIELD16(0x0001) #define MAC_CSR17_BBP_DESIRE_STATE FIELD16(0x0006) #define MAC_CSR17_RF_DESIRE_STATE FIELD16(0x0018) #define MAC_CSR17_BBP_CURR_STATE FIELD16(0x0060) #define MAC_CSR17_RF_CURR_STATE FIELD16(0x0180) #define MAC_CSR17_PUT_TO_SLEEP FIELD16(0x0200) /* * MAC_CSR18: Wakeup timer register. * DELAY_AFTER_BEACON: Delay after Tbcn expired in units of 1/16 TU. * BEACONS_BEFORE_WAKEUP: Number of beacon before wakeup. * AUTO_WAKE: Enable auto wakeup / sleep mechanism. */ #define MAC_CSR18 0x0424 #define MAC_CSR18_DELAY_AFTER_BEACON FIELD16(0x00ff) #define MAC_CSR18_BEACONS_BEFORE_WAKEUP FIELD16(0x7f00) #define MAC_CSR18_AUTO_WAKE FIELD16(0x8000) /* * MAC_CSR19: GPIO control register. * MAC_CSR19_VALx: GPIO value * MAC_CSR19_DIRx: GPIO direction: 0 = input; 1 = output */ #define MAC_CSR19 0x0426 #define MAC_CSR19_VAL0 FIELD16(0x0001) #define MAC_CSR19_VAL1 FIELD16(0x0002) #define MAC_CSR19_VAL2 FIELD16(0x0004) #define MAC_CSR19_VAL3 FIELD16(0x0008) #define MAC_CSR19_VAL4 FIELD16(0x0010) #define MAC_CSR19_VAL5 FIELD16(0x0020) #define MAC_CSR19_VAL6 FIELD16(0x0040) #define MAC_CSR19_VAL7 FIELD16(0x0080) #define MAC_CSR19_DIR0 FIELD16(0x0100) #define MAC_CSR19_DIR1 FIELD16(0x0200) #define MAC_CSR19_DIR2 FIELD16(0x0400) #define MAC_CSR19_DIR3 FIELD16(0x0800) #define MAC_CSR19_DIR4 FIELD16(0x1000) #define MAC_CSR19_DIR5 FIELD16(0x2000) #define MAC_CSR19_DIR6 FIELD16(0x4000) #define MAC_CSR19_DIR7 FIELD16(0x8000) /* * MAC_CSR20: LED control register. * ACTIVITY: 0: idle, 1: active. * LINK: 0: linkoff, 1: linkup. * ACTIVITY_POLARITY: 0: active low, 1: active high. */ #define MAC_CSR20 0x0428 #define MAC_CSR20_ACTIVITY FIELD16(0x0001) #define MAC_CSR20_LINK FIELD16(0x0002) #define MAC_CSR20_ACTIVITY_POLARITY FIELD16(0x0004) /* * MAC_CSR21: LED control register. * ON_PERIOD: On period, default 70ms. * OFF_PERIOD: Off period, default 30ms. */ #define MAC_CSR21 0x042a #define MAC_CSR21_ON_PERIOD FIELD16(0x00ff) #define MAC_CSR21_OFF_PERIOD FIELD16(0xff00) /* * MAC_CSR22: Collision window control register. */ #define MAC_CSR22 0x042c /* * Transmit related CSRs. * Some values are set in TU, whereas 1 TU == 1024 us. */ /* * TXRX_CSR0: Security control register. */ #define TXRX_CSR0 0x0440 #define TXRX_CSR0_ALGORITHM FIELD16(0x0007) #define TXRX_CSR0_IV_OFFSET FIELD16(0x01f8) #define TXRX_CSR0_KEY_ID FIELD16(0x1e00) /* * TXRX_CSR1: TX configuration. * ACK_TIMEOUT: ACK Timeout in unit of 1-us. * TSF_OFFSET: TSF offset in MAC header. * AUTO_SEQUENCE: Let ASIC control frame sequence number. */ #define TXRX_CSR1 0x0442 #define TXRX_CSR1_ACK_TIMEOUT FIELD16(0x00ff) #define TXRX_CSR1_TSF_OFFSET FIELD16(0x7f00) #define TXRX_CSR1_AUTO_SEQUENCE FIELD16(0x8000) /* * TXRX_CSR2: RX control. * DISABLE_RX: Disable rx engine. * DROP_CRC: Drop crc error. * DROP_PHYSICAL: Drop physical error. * DROP_CONTROL: Drop control frame. * DROP_NOT_TO_ME: Drop not to me unicast frame. * DROP_TODS: Drop frame tods bit is true. * DROP_VERSION_ERROR: Drop version error frame. * DROP_MCAST: Drop multicast frames. * DROP_BCAST: Drop broadcast frames. */ #define TXRX_CSR2 0x0444 #define TXRX_CSR2_DISABLE_RX FIELD16(0x0001) #define TXRX_CSR2_DROP_CRC FIELD16(0x0002) #define TXRX_CSR2_DROP_PHYSICAL FIELD16(0x0004) #define TXRX_CSR2_DROP_CONTROL FIELD16(0x0008) #define TXRX_CSR2_DROP_NOT_TO_ME FIELD16(0x0010) #define TXRX_CSR2_DROP_TODS FIELD16(0x0020) #define TXRX_CSR2_DROP_VERSION_ERROR FIELD16(0x0040) #define TXRX_CSR2_DROP_MULTICAST FIELD16(0x0200) #define TXRX_CSR2_DROP_BROADCAST FIELD16(0x0400) /* * RX BBP ID registers * TXRX_CSR3: CCK RX BBP ID. * TXRX_CSR4: OFDM RX BBP ID. */ #define TXRX_CSR3 0x0446 #define TXRX_CSR4 0x0448 /* * TXRX_CSR5: CCK TX BBP ID0. */ #define TXRX_CSR5 0x044a #define TXRX_CSR5_BBP_ID0 FIELD16(0x007f) #define TXRX_CSR5_BBP_ID0_VALID FIELD16(0x0080) #define TXRX_CSR5_BBP_ID1 FIELD16(0x7f00) #define TXRX_CSR5_BBP_ID1_VALID FIELD16(0x8000) /* * TXRX_CSR6: CCK TX BBP ID1. */ #define TXRX_CSR6 0x044c #define TXRX_CSR6_BBP_ID0 FIELD16(0x007f) #define TXRX_CSR6_BBP_ID0_VALID FIELD16(0x0080) #define TXRX_CSR6_BBP_ID1 FIELD16(0x7f00) #define TXRX_CSR6_BBP_ID1_VALID FIELD16(0x8000) /* * TXRX_CSR7: OFDM TX BBP ID0. */ #define TXRX_CSR7 0x044e #define TXRX_CSR7_BBP_ID0 FIELD16(0x007f) #define TXRX_CSR7_BBP_ID0_VALID FIELD16(0x0080) #define TXRX_CSR7_BBP_ID1 FIELD16(0x7f00) #define TXRX_CSR7_BBP_ID1_VALID FIELD16(0x8000) /* * TXRX_CSR8: OFDM TX BBP ID1. */ #define TXRX_CSR8 0x0450 #define TXRX_CSR8_BBP_ID0 FIELD16(0x007f) #define TXRX_CSR8_BBP_ID0_VALID FIELD16(0x0080) #define TXRX_CSR8_BBP_ID1 FIELD16(0x7f00) #define TXRX_CSR8_BBP_ID1_VALID FIELD16(0x8000) /* * TXRX_CSR9: TX ACK time-out. */ #define TXRX_CSR9 0x0452 /* * TXRX_CSR10: Auto responder control. */ #define TXRX_CSR10 0x0454 #define TXRX_CSR10_AUTORESPOND_PREAMBLE FIELD16(0x0004) /* * TXRX_CSR11: Auto responder basic rate. */ #define TXRX_CSR11 0x0456 /* * ACK/CTS time registers. */ #define TXRX_CSR12 0x0458 #define TXRX_CSR13 0x045a #define TXRX_CSR14 0x045c #define TXRX_CSR15 0x045e #define TXRX_CSR16 0x0460 #define TXRX_CSR17 0x0462 /* * TXRX_CSR18: Synchronization control register. */ #define TXRX_CSR18 0x0464 #define TXRX_CSR18_OFFSET FIELD16(0x000f) #define TXRX_CSR18_INTERVAL FIELD16(0xfff0) /* * TXRX_CSR19: Synchronization control register. * TSF_COUNT: Enable TSF auto counting. * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. * TBCN: Enable Tbcn with reload value. * BEACON_GEN: Enable beacon generator. */ #define TXRX_CSR19 0x0466 #define TXRX_CSR19_TSF_COUNT FIELD16(0x0001) #define TXRX_CSR19_TSF_SYNC FIELD16(0x0006) #define TXRX_CSR19_TBCN FIELD16(0x0008) #define TXRX_CSR19_BEACON_GEN FIELD16(0x0010) /* * TXRX_CSR20: Tx BEACON offset time control register. * OFFSET: In units of usec. * BCN_EXPECT_WINDOW: Default: 2^CWmin */ #define TXRX_CSR20 0x0468 #define TXRX_CSR20_OFFSET FIELD16(0x1fff) #define TXRX_CSR20_BCN_EXPECT_WINDOW FIELD16(0xe000) /* * TXRX_CSR21 */ #define TXRX_CSR21 0x046a /* * Encryption related CSRs. * */ /* * SEC_CSR0: Shared key 0, word 0 * SEC_CSR1: Shared key 0, word 1 * SEC_CSR2: Shared key 0, word 2 * SEC_CSR3: Shared key 0, word 3 * SEC_CSR4: Shared key 0, word 4 * SEC_CSR5: Shared key 0, word 5 * SEC_CSR6: Shared key 0, word 6 * SEC_CSR7: Shared key 0, word 7 */ #define SEC_CSR0 0x0480 #define SEC_CSR1 0x0482 #define SEC_CSR2 0x0484 #define SEC_CSR3 0x0486 #define SEC_CSR4 0x0488 #define SEC_CSR5 0x048a #define SEC_CSR6 0x048c #define SEC_CSR7 0x048e /* * SEC_CSR8: Shared key 1, word 0 * SEC_CSR9: Shared key 1, word 1 * SEC_CSR10: Shared key 1, word 2 * SEC_CSR11: Shared key 1, word 3 * SEC_CSR12: Shared key 1, word 4 * SEC_CSR13: Shared key 1, word 5 * SEC_CSR14: Shared key 1, word 6 * SEC_CSR15: Shared key 1, word 7 */ #define SEC_CSR8 0x0490 #define SEC_CSR9 0x0492 #define SEC_CSR10 0x0494 #define SEC_CSR11 0x0496 #define SEC_CSR12 0x0498 #define SEC_CSR13 0x049a #define SEC_CSR14 0x049c #define SEC_CSR15 0x049e /* * SEC_CSR16: Shared key 2, word 0 * SEC_CSR17: Shared key 2, word 1 * SEC_CSR18: Shared key 2, word 2 * SEC_CSR19: Shared key 2, word 3 * SEC_CSR20: Shared key 2, word 4 * SEC_CSR21: Shared key 2, word 5 * SEC_CSR22: Shared key 2, word 6 * SEC_CSR23: Shared key 2, word 7 */ #define SEC_CSR16 0x04a0 #define SEC_CSR17 0x04a2 #define SEC_CSR18 0X04A4 #define SEC_CSR19 0x04a6 #define SEC_CSR20 0x04a8 #define SEC_CSR21 0x04aa #define SEC_CSR22 0x04ac #define SEC_CSR23 0x04ae /* * SEC_CSR24: Shared key 3, word 0 * SEC_CSR25: Shared key 3, word 1 * SEC_CSR26: Shared key 3, word 2 * SEC_CSR27: Shared key 3, word 3 * SEC_CSR28: Shared key 3, word 4 * SEC_CSR29: Shared key 3, word 5 * SEC_CSR30: Shared key 3, word 6 * SEC_CSR31: Shared key 3, word 7 */ #define SEC_CSR24 0x04b0 #define SEC_CSR25 0x04b2 #define SEC_CSR26 0x04b4 #define SEC_CSR27 0x04b6 #define SEC_CSR28 0x04b8 #define SEC_CSR29 0x04ba #define SEC_CSR30 0x04bc #define SEC_CSR31 0x04be #define KEY_ENTRY(__idx) \ ( SEC_CSR0 + ((__idx) * 16) ) /* * PHY control registers. */ /* * PHY_CSR0: RF switching timing control. */ #define PHY_CSR0 0x04c0 /* * PHY_CSR1: TX PA configuration. */ #define PHY_CSR1 0x04c2 /* * MAC configuration registers. */ /* * PHY_CSR2: TX MAC configuration. * NOTE: Both register fields are complete dummy, * documentation and legacy drivers are unclear un * what this register means or what fields exists. */ #define PHY_CSR2 0x04c4 #define PHY_CSR2_LNA FIELD16(0x0002) #define PHY_CSR2_LNA_MODE FIELD16(0x3000) /* * PHY_CSR3: RX MAC configuration. */ #define PHY_CSR3 0x04c6 /* * PHY_CSR4: Interface configuration. */ #define PHY_CSR4 0x04c8 #define PHY_CSR4_LOW_RF_LE FIELD16(0x0001) /* * BBP pre-TX registers. * PHY_CSR5: BBP pre-TX CCK. */ #define PHY_CSR5 0x04ca #define PHY_CSR5_CCK FIELD16(0x0003) #define PHY_CSR5_CCK_FLIP FIELD16(0x0004) /* * BBP pre-TX registers. * PHY_CSR6: BBP pre-TX OFDM. */ #define PHY_CSR6 0x04cc #define PHY_CSR6_OFDM FIELD16(0x0003) #define PHY_CSR6_OFDM_FLIP FIELD16(0x0004) /* * PHY_CSR7: BBP access register 0. * BBP_DATA: BBP data. * BBP_REG_ID: BBP register ID. * BBP_READ_CONTROL: 0: write, 1: read. */ #define PHY_CSR7 0x04ce #define PHY_CSR7_DATA FIELD16(0x00ff) #define PHY_CSR7_REG_ID FIELD16(0x7f00) #define PHY_CSR7_READ_CONTROL FIELD16(0x8000) /* * PHY_CSR8: BBP access register 1. * BBP_BUSY: ASIC is busy execute BBP programming. */ #define PHY_CSR8 0x04d0 #define PHY_CSR8_BUSY FIELD16(0x0001) /* * PHY_CSR9: RF access register. * RF_VALUE: Register value + id to program into rf/if. */ #define PHY_CSR9 0x04d2 #define PHY_CSR9_RF_VALUE FIELD16(0xffff) /* * PHY_CSR10: RF access register. * RF_VALUE: Register value + id to program into rf/if. * RF_NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). * RF_IF_SELECT: Chip to program: 0: rf, 1: if. * RF_PLL_LD: Rf pll_ld status. * RF_BUSY: 1: asic is busy execute rf programming. */ #define PHY_CSR10 0x04d4 #define PHY_CSR10_RF_VALUE FIELD16(0x00ff) #define PHY_CSR10_RF_NUMBER_OF_BITS FIELD16(0x1f00) #define PHY_CSR10_RF_IF_SELECT FIELD16(0x2000) #define PHY_CSR10_RF_PLL_LD FIELD16(0x4000) #define PHY_CSR10_RF_BUSY FIELD16(0x8000) /* * STA_CSR0: FCS error count. * FCS_ERROR: FCS error count, cleared when read. */ #define STA_CSR0 0x04e0 #define STA_CSR0_FCS_ERROR FIELD16(0xffff) /* * STA_CSR1: PLCP error count. */ #define STA_CSR1 0x04e2 /* * STA_CSR2: LONG error count. */ #define STA_CSR2 0x04e4 /* * STA_CSR3: CCA false alarm. * FALSE_CCA_ERROR: False CCA error count, cleared when read. */ #define STA_CSR3 0x04e6 #define STA_CSR3_FALSE_CCA_ERROR FIELD16(0xffff) /* * STA_CSR4: RX FIFO overflow. */ #define STA_CSR4 0x04e8 /* * STA_CSR5: Beacon sent counter. */ #define STA_CSR5 0x04ea /* * Statistics registers */ #define STA_CSR6 0x04ec #define STA_CSR7 0x04ee #define STA_CSR8 0x04f0 #define STA_CSR9 0x04f2 #define STA_CSR10 0x04f4 /* * BBP registers. * The wordsize of the BBP is 8 bits. */ /* * R2: TX antenna control */ #define BBP_R2_TX_ANTENNA FIELD8(0x03) #define BBP_R2_TX_IQ_FLIP FIELD8(0x04) /* * R14: RX antenna control */ #define BBP_R14_RX_ANTENNA FIELD8(0x03) #define BBP_R14_RX_IQ_FLIP FIELD8(0x04) /* * RF registers. */ /* * RF 1 */ #define RF1_TUNER FIELD32(0x00020000) /* * RF 3 */ #define RF3_TUNER FIELD32(0x00000100) #define RF3_TXPOWER FIELD32(0x00003e00) /* * EEPROM contents. */ /* * HW MAC address. */ #define EEPROM_MAC_ADDR_0 0x0002 #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) #define EEPROM_MAC_ADDR1 0x0003 #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) #define EEPROM_MAC_ADDR_2 0x0004 #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) /* * EEPROM antenna. * ANTENNA_NUM: Number of antenna's. * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. * LED_MODE: 0: default, 1: TX/RX activity, 2: Single (ignore link), 3: rsvd. * DYN_TXAGC: Dynamic TX AGC control. * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. * RF_TYPE: Rf_type of this adapter. */ #define EEPROM_ANTENNA 0x000b #define EEPROM_ANTENNA_NUM FIELD16(0x0003) #define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) #define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) #define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0) #define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) #define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) #define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) /* * EEPROM NIC config. * CARDBUS_ACCEL: 0: enable, 1: disable. * DYN_BBP_TUNE: 0: enable, 1: disable. * CCK_TX_POWER: CCK TX power compensation. */ #define EEPROM_NIC 0x000c #define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001) #define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002) #define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c) /* * EEPROM geography. * GEO: Default geography setting for device. */ #define EEPROM_GEOGRAPHY 0x000d #define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00) /* * EEPROM BBP. */ #define EEPROM_BBP_START 0x000e #define EEPROM_BBP_SIZE 16 #define EEPROM_BBP_VALUE FIELD16(0x00ff) #define EEPROM_BBP_REG_ID FIELD16(0xff00) /* * EEPROM TXPOWER */ #define EEPROM_TXPOWER_START 0x001e #define EEPROM_TXPOWER_SIZE 7 #define EEPROM_TXPOWER_1 FIELD16(0x00ff) #define EEPROM_TXPOWER_2 FIELD16(0xff00) /* * EEPROM Tuning threshold */ #define EEPROM_BBPTUNE 0x0030 #define EEPROM_BBPTUNE_THRESHOLD FIELD16(0x00ff) /* * EEPROM BBP R24 Tuning. */ #define EEPROM_BBPTUNE_R24 0x0031 #define EEPROM_BBPTUNE_R24_LOW FIELD16(0x00ff) #define EEPROM_BBPTUNE_R24_HIGH FIELD16(0xff00) /* * EEPROM BBP R25 Tuning. */ #define EEPROM_BBPTUNE_R25 0x0032 #define EEPROM_BBPTUNE_R25_LOW FIELD16(0x00ff) #define EEPROM_BBPTUNE_R25_HIGH FIELD16(0xff00) /* * EEPROM BBP R24 Tuning. */ #define EEPROM_BBPTUNE_R61 0x0033 #define EEPROM_BBPTUNE_R61_LOW FIELD16(0x00ff) #define EEPROM_BBPTUNE_R61_HIGH FIELD16(0xff00) /* * EEPROM BBP VGC Tuning. */ #define EEPROM_BBPTUNE_VGC 0x0034 #define EEPROM_BBPTUNE_VGCUPPER FIELD16(0x00ff) #define EEPROM_BBPTUNE_VGCLOWER FIELD16(0xff00) /* * EEPROM BBP R17 Tuning. */ #define EEPROM_BBPTUNE_R17 0x0035 #define EEPROM_BBPTUNE_R17_LOW FIELD16(0x00ff) #define EEPROM_BBPTUNE_R17_HIGH FIELD16(0xff00) /* * RSSI <-> dBm offset calibration */ #define EEPROM_CALIBRATE_OFFSET 0x0036 #define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff) /* * DMA descriptor defines. */ #define TXD_DESC_SIZE ( 5 * sizeof(__le32) ) #define RXD_DESC_SIZE ( 4 * sizeof(__le32) ) /* * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. */ /* * Word0 */ #define TXD_W0_PACKET_ID FIELD32(0x0000000f) #define TXD_W0_RETRY_LIMIT FIELD32(0x000000f0) #define TXD_W0_MORE_FRAG FIELD32(0x00000100) #define TXD_W0_ACK FIELD32(0x00000200) #define TXD_W0_TIMESTAMP FIELD32(0x00000400) #define TXD_W0_OFDM FIELD32(0x00000800) #define TXD_W0_NEW_SEQ FIELD32(0x00001000) #define TXD_W0_IFS FIELD32(0x00006000) #define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) #define TXD_W0_CIPHER FIELD32(0x20000000) #define TXD_W0_KEY_ID FIELD32(0xc0000000) /* * Word1 */ #define TXD_W1_IV_OFFSET FIELD32(0x0000003f) #define TXD_W1_AIFS FIELD32(0x000000c0) #define TXD_W1_CWMIN FIELD32(0x00000f00) #define TXD_W1_CWMAX FIELD32(0x0000f000) /* * Word2: PLCP information */ #define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) #define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) #define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) #define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) /* * Word3 */ #define TXD_W3_IV FIELD32(0xffffffff) /* * Word4 */ #define TXD_W4_EIV FIELD32(0xffffffff) /* * RX descriptor format for RX Ring. */ /* * Word0 */ #define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) #define RXD_W0_MULTICAST FIELD32(0x00000004) #define RXD_W0_BROADCAST FIELD32(0x00000008) #define RXD_W0_MY_BSS FIELD32(0x00000010) #define RXD_W0_CRC_ERROR FIELD32(0x00000020) #define RXD_W0_OFDM FIELD32(0x00000040) #define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) #define RXD_W0_CIPHER FIELD32(0x00000100) #define RXD_W0_CIPHER_ERROR FIELD32(0x00000200) #define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) /* * Word1 */ #define RXD_W1_RSSI FIELD32(0x000000ff) #define RXD_W1_SIGNAL FIELD32(0x0000ff00) /* * Word2 */ #define RXD_W2_IV FIELD32(0xffffffff) /* * Word3 */ #define RXD_W3_EIV FIELD32(0xffffffff) /* * Macros for converting txpower from EEPROM to mac80211 value * and from mac80211 value to register value. */ #define MIN_TXPOWER 0 #define MAX_TXPOWER 31 #define DEFAULT_TXPOWER 24 #define TXPOWER_FROM_DEV(__txpower) \ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) #define TXPOWER_TO_DEV(__txpower) \ clamp_t(u8, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT2500USB_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1