| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| M Chetan Kumar | 816 | 100.00% | 3 | 100.00% |
| Total | 816 | 3 |
/* SPDX-License-Identifier: GPL-2.0-only * * Copyright (C) 2020-21 Intel Corporation. */ #ifndef IOSM_IPC_MUX_H #define IOSM_IPC_MUX_H #include "iosm_ipc_protocol.h" #define IPC_MEM_MAX_UL_DG_ENTRIES 100 #define IPC_MEM_MAX_TDS_MUX_AGGR_UL 60 #define IPC_MEM_MAX_TDS_MUX_AGGR_DL 60 #define IPC_MEM_MAX_ADB_BUF_SIZE (16 * 1024) #define IPC_MEM_MAX_UL_ADB_BUF_SIZE IPC_MEM_MAX_ADB_BUF_SIZE #define IPC_MEM_MAX_DL_ADB_BUF_SIZE IPC_MEM_MAX_ADB_BUF_SIZE /* Size of the buffer for the IP MUX Lite data buffer. */ #define IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE (2 * 1024) /* TD counts for IP MUX Lite */ #define IPC_MEM_MAX_TDS_MUX_LITE_UL 800 #define IPC_MEM_MAX_TDS_MUX_LITE_DL 1200 /* open session request (AP->CP) */ #define MUX_CMD_OPEN_SESSION 1 /* response to open session request (CP->AP) */ #define MUX_CMD_OPEN_SESSION_RESP 2 /* close session request (AP->CP) */ #define MUX_CMD_CLOSE_SESSION 3 /* response to close session request (CP->AP) */ #define MUX_CMD_CLOSE_SESSION_RESP 4 /* Flow control command with mask of the flow per queue/flow. */ #define MUX_LITE_CMD_FLOW_CTL 5 /* ACK the flow control command. Shall have the same Transaction ID as the * matching FLOW_CTL command. */ #define MUX_LITE_CMD_FLOW_CTL_ACK 6 /* Command for report packet indicating link quality metrics. */ #define MUX_LITE_CMD_LINK_STATUS_REPORT 7 /* Response to a report packet */ #define MUX_LITE_CMD_LINK_STATUS_REPORT_RESP 8 /* Used to reset a command/response state. */ #define MUX_CMD_INVALID 255 /* command response : command processed successfully */ #define MUX_CMD_RESP_SUCCESS 0 /* MUX for route link devices */ #define IPC_MEM_WWAN_MUX BIT(0) /* Initiated actions to change the state of the MUX object. */ enum mux_event { MUX_E_INACTIVE, /* No initiated actions. */ MUX_E_MUX_SESSION_OPEN, /* Create the MUX channel and a session. */ MUX_E_MUX_SESSION_CLOSE, /* Release a session. */ MUX_E_MUX_CHANNEL_CLOSE, /* Release the MUX channel. */ MUX_E_NO_ORDERS, /* No MUX order. */ MUX_E_NOT_APPLICABLE, /* Defect IP MUX. */ }; /* MUX session open command. */ struct mux_session_open { enum mux_event event; __le32 if_id; }; /* MUX session close command. */ struct mux_session_close { enum mux_event event; __le32 if_id; }; /* MUX channel close command. */ struct mux_channel_close { enum mux_event event; }; /* Default message type to find out the right message type. */ struct mux_common { enum mux_event event; }; /* List of ops in MUX mode. */ union mux_msg { struct mux_session_open session_open; struct mux_session_close session_close; struct mux_channel_close channel_close; struct mux_common common; }; /* Parameter definition of the open session command. */ struct mux_cmd_open_session { u8 flow_ctrl; /* 0: Flow control disabled (flow allowed). */ /* 1: Flow control enabled (flow not allowed)*/ u8 ipv4v6_hints; /* 0: IPv4/IPv6 hints not supported.*/ /* 1: IPv4/IPv6 hints supported*/ __le16 reserved2; /* Reserved. Set to zero. */ __le32 dl_head_pad_len; /* Maximum length supported */ /* for DL head padding on a datagram. */ }; /* Parameter definition of the open session response. */ struct mux_cmd_open_session_resp { __le32 response; /* Response code */ u8 flow_ctrl; /* 0: Flow control disabled (flow allowed). */ /* 1: Flow control enabled (flow not allowed) */ u8 ipv4v6_hints; /* 0: IPv4/IPv6 hints not supported */ /* 1: IPv4/IPv6 hints supported */ __le16 reserved2; /* Reserved. Set to zero. */ __le32 ul_head_pad_len; /* Actual length supported for */ /* UL head padding on adatagram.*/ }; /* Parameter definition of the close session response code */ struct mux_cmd_close_session_resp { __le32 response; }; /* Parameter definition of the flow control command. */ struct mux_cmd_flow_ctl { __le32 mask; /* indicating the desired flow control */ /* state for various flows/queues */ }; /* Parameter definition of the link status report code*/ struct mux_cmd_link_status_report { u8 payload; }; /* Parameter definition of the link status report response code. */ struct mux_cmd_link_status_report_resp { __le32 response; }; /** * union mux_cmd_param - Union-definition of the command parameters. * @open_session: Inband command for open session * @open_session_resp: Inband command for open session response * @close_session_resp: Inband command for close session response * @flow_ctl: In-band flow control on the opened interfaces * @link_status: In-band Link Status Report * @link_status_resp: In-band command for link status report response */ union mux_cmd_param { struct mux_cmd_open_session open_session; struct mux_cmd_open_session_resp open_session_resp; struct mux_cmd_close_session_resp close_session_resp; struct mux_cmd_flow_ctl flow_ctl; struct mux_cmd_link_status_report link_status; struct mux_cmd_link_status_report_resp link_status_resp; }; /* States of the MUX object.. */ enum mux_state { MUX_S_INACTIVE, /* IP MUX is unused. */ MUX_S_ACTIVE, /* IP MUX channel is available. */ MUX_S_ERROR, /* Defect IP MUX. */ }; /* Supported MUX protocols. */ enum ipc_mux_protocol { MUX_UNKNOWN, MUX_LITE, MUX_AGGREGATION, }; /* Supported UL data transfer methods. */ enum ipc_mux_ul_flow { MUX_UL_UNKNOWN, MUX_UL, /* Normal UL data transfer */ MUX_UL_ON_CREDITS, /* UL data transfer will be based on credits */ }; /* List of the MUX session. */ struct mux_session { struct iosm_wwan *wwan; /*Network i/f used for communication*/ int if_id; /* i/f id for session open message.*/ u32 flags; u32 ul_head_pad_len; /* Nr of bytes for UL head padding. */ u32 dl_head_pad_len; /* Nr of bytes for DL head padding. */ struct sk_buff_head ul_list; /* skb entries for an ADT. */ u32 flow_ctl_mask; /* UL flow control */ u32 flow_ctl_en_cnt; /* Flow control Enable cmd count */ u32 flow_ctl_dis_cnt; /* Flow Control Disable cmd count */ int ul_flow_credits; /* UL flow credits */ u8 net_tx_stop:1, flush:1; /* flush net interface ? */ }; /** * struct mux_adth_dg - Structure of the datagram in the Aggregated Datagram * Table Header. * @datagram_index : Index (in bytes) to the k-th datagram in the table. * Index shall count from the start of the block including * the 16-byte header. This value shall be non-zero. * @datagram_length: Length of the k-th datagram including the head padding. * This value shall be non-zero. * @service_class: Service class identifier for the datagram. * @reserved: Reserved bytes. Set to zero */ struct mux_adth_dg { __le32 datagram_index; __le16 datagram_length; u8 service_class; u8 reserved; }; /** * struct mux_qlth_ql - Structure of the queue level in the Aggregated * Datagram Queue Level Table Header. * @nr_of_bytes: Number of bytes available to transmit in the queue. */ struct mux_qlth_ql { __le32 nr_of_bytes; }; /** * struct mux_qlth - Structure of Aggregated Datagram Queue Level Table * Header. * @signature: Signature of the Queue Level Table Header * Value: 0x48544C51 (ASCII characters: 'Q' 'L' 'T' 'H') * @table_length: Length (in bytes) of the datagram table. This length * shall include the queue level table header size. * Minimum value:0x10 * @if_id: ID of the interface the queue levels in the table * belong to. * @reserved: Reserved byte. Set to zero. * @next_table_index: Index (in bytes) to the next table in the buffer. Index * shall count from the start of the block including the * 16-byte header. Value of zero indicates end of the list. * @reserved2: Reserved bytes. Set to zero * @ql: Queue level table with variable length */ struct mux_qlth { __le32 signature; __le16 table_length; u8 if_id; u8 reserved; __le32 next_table_index; __le32 reserved2; struct mux_qlth_ql ql; }; /** * struct mux_adb - Structure of State of a single UL data block. * @dest_skb: Current UL skb for the data block. * @buf: ADB memory * @adgh: ADGH pointer * @qlth_skb: QLTH pointer * @next_table_index: Pointer to next table index. * @free_list: List of alloc. ADB for the UL sess. * @size: Size of the ADB memory. * @if_cnt: Statistic counter * @dg_cnt_total: Datagram count total * @payload_size: Payload Size * @dg: Datagram table. * @pp_qlt: Pointers to hold Queue Level Tables of session * @adbh: ADBH pointer * @qlt_updated: Queue level table updated * @dg_count: Datagram count */ struct mux_adb { struct sk_buff *dest_skb; u8 *buf; struct mux_adgh *adgh; struct sk_buff *qlth_skb; u32 *next_table_index; struct sk_buff_head free_list; int size; u32 if_cnt; u32 dg_cnt_total; u32 payload_size; struct mux_adth_dg dg[IPC_MEM_MUX_IP_SESSION_ENTRIES][IPC_MEM_MAX_UL_DG_ENTRIES]; struct mux_qlth *pp_qlt[IPC_MEM_MUX_IP_SESSION_ENTRIES]; struct mux_adbh *adbh; u32 qlt_updated[IPC_MEM_MUX_IP_SESSION_ENTRIES]; u32 dg_count[IPC_MEM_MUX_IP_SESSION_ENTRIES]; }; /** * struct mux_acb - Structure of Temporary ACB state. * @skb: Used UL skb. * @if_id: Session id. * @buf_p: Command buffer. * @wanted_response: Wanted Response * @got_response: Got response * @cmd: command * @got_param: Received command/response parameter */ struct mux_acb { struct sk_buff *skb; /* Used UL skb. */ int if_id; /* Session id. */ u8 *buf_p; u32 wanted_response; u32 got_response; u32 cmd; union mux_cmd_param got_param; /* Received command/response parameter */ }; /** * struct iosm_mux - Structure of the data multiplexing over an IP channel. * @dev: Pointer to device structure * @session: Array of the MUX sessions. * @channel: Reference to the IP MUX channel * @pcie: Pointer to iosm_pcie struct * @imem: Pointer to iosm_imem * @wwan: Poinetr to iosm_wwan * @ipc_protocol: Pointer to iosm_protocol * @channel_id: Channel ID for MUX * @protocol: Type of the MUX protocol * @ul_flow: UL Flow type * @nr_sessions: Number of sessions * @instance_id: Instance ID * @state: States of the MUX object * @event: Initiated actions to change the state of the MUX object * @tx_transaction_id: Transaction id for the ACB command. * @rr_next_session: Next session number for round robin. * @ul_adb: State of the UL ADB/ADGH. * @size_needed: Variable to store the size needed during ADB preparation * @ul_data_pend_bytes: Pending UL data to be processed in bytes * @acb: Temporary ACB state * @wwan_q_offset: This will hold the offset of the given instance * Useful while passing or receiving packets from * wwan/imem layer. * @adb_finish_timer: Timer for forcefully finishing the ADB * @acb_tx_sequence_nr: Sequence number for the ACB header. * @params: user configurable parameters * @adb_tx_sequence_nr: Sequence number for ADB header * @acc_adb_size: Statistic data for logging * @acc_payload_size: Statistic data for logging * @initialized: MUX object is initialized * @ev_mux_net_transmit_pending: * 0 means inform the IPC tasklet to pass the * accumulated uplink ADB to CP. * @adb_prep_ongoing: Flag for ADB preparation status */ struct iosm_mux { struct device *dev; struct mux_session session[IPC_MEM_MUX_IP_SESSION_ENTRIES]; struct ipc_mem_channel *channel; struct iosm_pcie *pcie; struct iosm_imem *imem; struct iosm_wwan *wwan; struct iosm_protocol *ipc_protocol; int channel_id; enum ipc_mux_protocol protocol; enum ipc_mux_ul_flow ul_flow; int nr_sessions; int instance_id; enum mux_state state; enum mux_event event; u32 tx_transaction_id; int rr_next_session; struct mux_adb ul_adb; int size_needed; long long ul_data_pend_bytes; struct mux_acb acb; int wwan_q_offset; struct hrtimer adb_finish_timer; u16 acb_tx_sequence_nr; struct ipc_params *params; u16 adb_tx_sequence_nr; unsigned long long acc_adb_size; unsigned long long acc_payload_size; u8 initialized:1, ev_mux_net_transmit_pending:1, adb_prep_ongoing; } __packed; /* MUX configuration structure */ struct ipc_mux_config { enum ipc_mux_protocol protocol; enum ipc_mux_ul_flow ul_flow; int instance_id; }; /** * ipc_mux_init - Allocates and Init MUX instance * @mux_cfg: Pointer to MUX configuration structure * @ipc_imem: Pointer to imem data-struct * * Returns: Initialized mux pointer on success else NULL */ struct iosm_mux *ipc_mux_init(struct ipc_mux_config *mux_cfg, struct iosm_imem *ipc_imem); /** * ipc_mux_deinit - Deallocates MUX instance * @ipc_mux: Pointer to the MUX instance. */ void ipc_mux_deinit(struct iosm_mux *ipc_mux); /** * ipc_mux_check_n_restart_tx - Checks for pending UL date bytes and then * it restarts the net interface tx queue if * device has set flow control as off. * @ipc_mux: Pointer to MUX data-struct */ void ipc_mux_check_n_restart_tx(struct iosm_mux *ipc_mux); /** * ipc_mux_get_active_protocol - Returns the active MUX protocol type. * @ipc_mux: Pointer to MUX data-struct * * Returns: enum of type ipc_mux_protocol */ enum ipc_mux_protocol ipc_mux_get_active_protocol(struct iosm_mux *ipc_mux); /** * ipc_mux_open_session - Opens a MUX session for IP traffic. * @ipc_mux: Pointer to MUX data-struct * @session_nr: Interface ID or session number * * Returns: channel id on success, failure value on error */ int ipc_mux_open_session(struct iosm_mux *ipc_mux, int session_nr); /** * ipc_mux_close_session - Closes a MUX session. * @ipc_mux: Pointer to MUX data-struct * @session_nr: Interface ID or session number * * Returns: channel id on success, failure value on error */ int ipc_mux_close_session(struct iosm_mux *ipc_mux, int session_nr); /** * ipc_mux_get_max_sessions - Retuns the maximum sessions supported on the * provided MUX instance.. * @ipc_mux: Pointer to MUX data-struct * * Returns: Number of sessions supported on Success and failure value on error */ int ipc_mux_get_max_sessions(struct iosm_mux *ipc_mux); #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1