| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Arun Murthy | 628 | 62.12% | 1 | 4.35% |
| Linus Walleij | 253 | 25.02% | 12 | 52.17% |
| Lee Jones | 75 | 7.42% | 4 | 17.39% |
| Yang QU | 29 | 2.87% | 1 | 4.35% |
| Johan Bjornstedt | 9 | 0.89% | 1 | 4.35% |
| Michel Jaouen | 8 | 0.79% | 1 | 4.35% |
| Marcus Cooper | 4 | 0.40% | 1 | 4.35% |
| Hakan Berg | 4 | 0.40% | 1 | 4.35% |
| Thomas Gleixner | 1 | 0.10% | 1 | 4.35% |
| Total | 1011 | 23 |
/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef _AB8500_CHARGER_H_ #define _AB8500_CHARGER_H_ #include <linux/kernel.h> /* * System control 2 register offsets. * bank = 0x02 */ #define AB8500_MAIN_WDOG_CTRL_REG 0x01 #define AB8500_LOW_BAT_REG 0x03 #define AB8500_BATT_OK_REG 0x04 /* * USB/ULPI register offsets * Bank : 0x5 */ #define AB8500_USB_LINE_STAT_REG 0x80 #define AB8500_USB_LINE_CTRL2_REG 0x82 #define AB8500_USB_LINK1_STAT_REG 0x94 /* * Charger / status register offfsets * Bank : 0x0B */ #define AB8500_CH_STATUS1_REG 0x00 #define AB8500_CH_STATUS2_REG 0x01 #define AB8500_CH_USBCH_STAT1_REG 0x02 #define AB8500_CH_USBCH_STAT2_REG 0x03 #define AB8540_CH_USBCH_STAT3_REG 0x04 #define AB8500_CH_STAT_REG 0x05 /* * Charger / control register offfsets * Bank : 0x0B */ #define AB8500_CH_VOLT_LVL_REG 0x40 #define AB8500_CH_VOLT_LVL_MAX_REG 0x41 /*Only in Cut2.0*/ #define AB8500_CH_OPT_CRNTLVL_REG 0x42 #define AB8500_CH_OPT_CRNTLVL_MAX_REG 0x43 /*Only in Cut2.0*/ #define AB8500_CH_WD_TIMER_REG 0x50 #define AB8500_CHARG_WD_CTRL 0x51 #define AB8500_BTEMP_HIGH_TH 0x52 #define AB8500_LED_INDICATOR_PWM_CTRL 0x53 #define AB8500_LED_INDICATOR_PWM_DUTY 0x54 #define AB8500_BATT_OVV 0x55 #define AB8500_CHARGER_CTRL 0x56 #define AB8500_BAT_CTRL_CURRENT_SOURCE 0x60 /*Only in Cut2.0*/ /* * Charger / main control register offsets * Bank : 0x0B */ #define AB8500_MCH_CTRL1 0x80 #define AB8500_MCH_CTRL2 0x81 #define AB8500_MCH_IPT_CURLVL_REG 0x82 #define AB8500_CH_WD_REG 0x83 /* * Charger / USB control register offsets * Bank : 0x0B */ #define AB8500_USBCH_CTRL1_REG 0xC0 #define AB8500_USBCH_CTRL2_REG 0xC1 #define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2 #define AB8540_USB_PP_MODE_REG 0xC5 #define AB8540_USB_PP_CHR_REG 0xC6 /* * Gas Gauge register offsets * Bank : 0x0C */ #define AB8500_GASG_CC_CTRL_REG 0x00 #define AB8500_GASG_CC_ACCU1_REG 0x01 #define AB8500_GASG_CC_ACCU2_REG 0x02 #define AB8500_GASG_CC_ACCU3_REG 0x03 #define AB8500_GASG_CC_ACCU4_REG 0x04 #define AB8500_GASG_CC_SMPL_CNTRL_REG 0x05 #define AB8500_GASG_CC_SMPL_CNTRH_REG 0x06 #define AB8500_GASG_CC_SMPL_CNVL_REG 0x07 #define AB8500_GASG_CC_SMPL_CNVH_REG 0x08 #define AB8500_GASG_CC_CNTR_AVGOFF_REG 0x09 #define AB8500_GASG_CC_OFFSET_REG 0x0A #define AB8500_GASG_CC_NCOV_ACCU 0x10 #define AB8500_GASG_CC_NCOV_ACCU_CTRL 0x11 #define AB8500_GASG_CC_NCOV_ACCU_LOW 0x12 #define AB8500_GASG_CC_NCOV_ACCU_MED 0x13 #define AB8500_GASG_CC_NCOV_ACCU_HIGH 0x14 /* * Interrupt register offsets * Bank : 0x0E */ #define AB8500_IT_SOURCE2_REG 0x01 #define AB8500_IT_SOURCE21_REG 0x14 /* * RTC register offsets * Bank: 0x0F */ #define AB8500_RTC_BACKUP_CHG_REG 0x0C #define AB8500_RTC_CC_CONF_REG 0x01 #define AB8500_RTC_CTRL_REG 0x0B #define AB8500_RTC_CTRL1_REG 0x11 /* * OTP register offsets * Bank : 0x15 */ #define AB8500_OTP_CONF_15 0x0E /* GPADC constants from AB8500 spec, UM0836 */ #define ADC_RESOLUTION 1024 #define ADC_CH_MAIN_MIN 0 #define ADC_CH_MAIN_MAX 20030 #define ADC_CH_VBUS_MIN 0 #define ADC_CH_VBUS_MAX 20030 #define ADC_CH_VBAT_MIN 2300 #define ADC_CH_VBAT_MAX 4800 #define ADC_CH_BKBAT_MIN 0 #define ADC_CH_BKBAT_MAX 3200 /* Main charge i/p current */ #define MAIN_CH_IP_CUR_0P9A 0x80 #define MAIN_CH_IP_CUR_1P0A 0x90 #define MAIN_CH_IP_CUR_1P1A 0xA0 #define MAIN_CH_IP_CUR_1P2A 0xB0 #define MAIN_CH_IP_CUR_1P3A 0xC0 #define MAIN_CH_IP_CUR_1P4A 0xD0 #define MAIN_CH_IP_CUR_1P5A 0xE0 /* ChVoltLevel */ #define CH_VOL_LVL_3P5 0x00 #define CH_VOL_LVL_4P0 0x14 #define CH_VOL_LVL_4P05 0x16 #define CH_VOL_LVL_4P1 0x1B #define CH_VOL_LVL_4P15 0x20 #define CH_VOL_LVL_4P2 0x25 #define CH_VOL_LVL_4P6 0x4D /* ChOutputCurrentLevel */ #define CH_OP_CUR_LVL_0P1 0x00 #define CH_OP_CUR_LVL_0P2 0x01 #define CH_OP_CUR_LVL_0P3 0x02 #define CH_OP_CUR_LVL_0P4 0x03 #define CH_OP_CUR_LVL_0P5 0x04 #define CH_OP_CUR_LVL_0P6 0x05 #define CH_OP_CUR_LVL_0P7 0x06 #define CH_OP_CUR_LVL_0P8 0x07 #define CH_OP_CUR_LVL_0P9 0x08 #define CH_OP_CUR_LVL_1P4 0x0D #define CH_OP_CUR_LVL_1P5 0x0E #define CH_OP_CUR_LVL_1P6 0x0F #define CH_OP_CUR_LVL_2P 0x3F /* BTEMP High thermal limits */ #define BTEMP_HIGH_TH_57_0 0x00 #define BTEMP_HIGH_TH_52 0x01 #define BTEMP_HIGH_TH_57_1 0x02 #define BTEMP_HIGH_TH_62 0x03 #define LOW_BAT_3P1V 0x20 #define LOW_BAT_2P3V 0x00 #define LOW_BAT_RESET 0x01 #define LOW_BAT_ENABLE 0x01 /* Backup battery constants */ #define BUP_ICH_SEL_50UA 0x00 #define BUP_ICH_SEL_150UA 0x04 #define BUP_ICH_SEL_300UA 0x08 #define BUP_ICH_SEL_700UA 0x0C enum bup_vch_sel { BUP_VCH_SEL_2P5V, BUP_VCH_SEL_2P6V, BUP_VCH_SEL_2P8V, BUP_VCH_SEL_3P1V, /* * Note that the following 5 values 2.7v, 2.9v, 3.0v, 3.2v, 3.3v * are only available on ab8540. You can't choose these 5 * voltage on ab8500/ab8505/ab9540. */ BUP_VCH_SEL_2P7V, BUP_VCH_SEL_2P9V, BUP_VCH_SEL_3P0V, BUP_VCH_SEL_3P2V, BUP_VCH_SEL_3P3V, }; #define BUP_VCH_RANGE 0x02 #define VBUP33_VRTCN 0x01 /* Battery OVV constants */ #define BATT_OVV_ENA 0x02 #define BATT_OVV_TH_3P7 0x00 #define BATT_OVV_TH_4P75 0x01 /* A value to indicate over voltage (microvolts) */ #define BATT_OVV_VALUE 4750000 /* VBUS OVV constants */ #define VBUS_OVV_SELECT_MASK 0x78 #define VBUS_OVV_SELECT_5P6V 0x00 #define VBUS_OVV_SELECT_5P7V 0x08 #define VBUS_OVV_SELECT_5P8V 0x10 #define VBUS_OVV_SELECT_5P9V 0x18 #define VBUS_OVV_SELECT_6P0V 0x20 #define VBUS_OVV_SELECT_6P1V 0x28 #define VBUS_OVV_SELECT_6P2V 0x30 #define VBUS_OVV_SELECT_6P3V 0x38 #define VBUS_AUTO_IN_CURR_LIM_ENA 0x04 /* Fuel Gauge constants */ #define RESET_ACCU 0x02 #define READ_REQ 0x01 #define CC_DEEP_SLEEP_ENA 0x02 #define CC_PWR_UP_ENA 0x01 #define CC_SAMPLES_40 0x28 #define RD_NCONV_ACCU_REQ 0x01 #define CC_CALIB 0x08 #define CC_INTAVGOFFSET_ENA 0x10 #define CC_MUXOFFSET 0x80 #define CC_INT_CAL_N_AVG_MASK 0x60 #define CC_INT_CAL_SAMPLES_16 0x40 #define CC_INT_CAL_SAMPLES_8 0x20 #define CC_INT_CAL_SAMPLES_4 0x00 /* RTC constants */ #define RTC_BUP_CH_ENA 0x10 /* BatCtrl Current Source Constants */ #define BAT_CTRL_7U_ENA 0x01 #define BAT_CTRL_20U_ENA 0x02 #define BAT_CTRL_18U_ENA 0x01 #define BAT_CTRL_16U_ENA 0x02 #define BAT_CTRL_CMP_ENA 0x04 #define FORCE_BAT_CTRL_CMP_HIGH 0x08 #define BAT_CTRL_PULL_UP_ENA 0x10 /* Battery type */ #define BATTERY_UNKNOWN 00 /* Registers for pcut feature in ab8505 and ab9540 */ #define AB8505_RTC_PCUT_CTL_STATUS_REG 0x12 #define AB8505_RTC_PCUT_TIME_REG 0x13 #define AB8505_RTC_PCUT_MAX_TIME_REG 0x14 #define AB8505_RTC_PCUT_FLAG_TIME_REG 0x15 #define AB8505_RTC_PCUT_RESTART_REG 0x16 #define AB8505_RTC_PCUT_DEBOUNCE_REG 0x17 /* USB Power Path constants for ab8540 */ #define BUS_VSYS_VOL_SELECT_MASK 0x06 #define BUS_VSYS_VOL_SELECT_3P6V 0x00 #define BUS_VSYS_VOL_SELECT_3P325V 0x02 #define BUS_VSYS_VOL_SELECT_3P9V 0x04 #define BUS_VSYS_VOL_SELECT_4P3V 0x06 #define BUS_POWER_PATH_MODE_ENA 0x01 #define BUS_PP_PRECHG_CURRENT_MASK 0x0E #define BUS_POWER_PATH_PRECHG_ENA 0x01 /* Forward declaration */ struct ab8500_fg; /** * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds * if not specified * @recovery_sleep_timer: Time between measurements while recovering * @recovery_total_time: Total recovery time * @init_timer: Measurement interval during startup * @init_discard_time: Time we discard voltage measurement at startup * @init_total_time: Total init time during startup * @high_curr_time: Time current has to be high to go to recovery * @accu_charging: FG accumulation time while charging * @accu_high_curr_ua: FG accumulation time in high current mode * @high_curr_threshold_ua: High current threshold, in uA * @lowbat_threshold_uv: Low battery threshold, in uV * @battok_falling_th_sel0 Threshold in mV for battOk signal sel0 * Resolution in 50 mV step. * @battok_raising_th_sel1 Threshold in mV for battOk signal sel1 * Resolution in 50 mV step. * @user_cap_limit Capacity reported from user must be within this * limit to be considered as sane, in percentage * points. * @maint_thres This is the threshold where we stop reporting * battery full while in maintenance, in per cent * @pcut_enable: Enable power cut feature in ab8505 * @pcut_max_time: Max time threshold * @pcut_flag_time: Flagtime threshold * @pcut_max_restart: Max number of restarts * @pcut_debounce_time: Sets battery debounce time */ struct ab8500_fg_parameters { int recovery_sleep_timer; int recovery_total_time; int init_timer; int init_discard_time; int init_total_time; int high_curr_time; int accu_charging; int accu_high_curr; int high_curr_threshold_ua; int lowbat_threshold_uv; int battok_falling_th_sel0; int battok_raising_th_sel1; int user_cap_limit; int maint_thres; bool pcut_enable; u8 pcut_max_time; u8 pcut_flag_time; u8 pcut_max_restart; u8 pcut_debounce_time; }; /** * struct ab8500_charger_maximization - struct used by the board config. * @use_maxi: Enable maximization for this battery type * @maxi_chg_curr_ua: Maximum charger current allowed in microampere * @maxi_wait_cycles: cycles to wait before setting charger current * @charger_curr_step_ua: delta between two charger current settings (uA) */ struct ab8500_maxim_parameters { bool ena_maxi; int chg_curr_ua; int wait_cycles; int charger_curr_step_ua; }; /** * struct ab8500_bm_capacity_levels - ab8500 capacity level data * @critical: critical capacity level in percent * @low: low capacity level in percent * @normal: normal capacity level in percent * @high: high capacity level in percent * @full: full capacity level in percent */ struct ab8500_bm_capacity_levels { int critical; int low; int normal; int high; int full; }; /** * struct ab8500_bm_charger_parameters - Charger specific parameters * @usb_volt_max_uv: maximum allowed USB charger voltage in uV * @usb_curr_max_ua: maximum allowed USB charger current in uA * @ac_volt_max_uv: maximum allowed AC charger voltage in uV * @ac_curr_max_ua: maximum allowed AC charger current in uA */ struct ab8500_bm_charger_parameters { int usb_volt_max_uv; int usb_curr_max_ua; int ac_volt_max_uv; int ac_curr_max_ua; }; /** * struct ab8500_bm_data - ab8500 battery management data * @bi battery info from device tree * @temp_now present battery temperature * @temp_interval_chg temperature measurement interval in s when charging * @temp_interval_nochg temperature measurement interval in s when not charging * @main_safety_tmr_h safety timer for main charger * @usb_safety_tmr_h safety timer for usb charger * @bkup_bat_v voltage which we charge the backup battery with * @bkup_bat_i current which we charge the backup battery with * @capacity_scaling indicates whether capacity scaling is to be used * @chg_unknown_bat flag to enable charging of unknown batteries * @enable_overshoot flag to enable VBAT overshoot control * @auto_trig flag to enable auto adc trigger * @fg_res resistance of FG resistor in 0.1mOhm * @interval_charging charge alg cycle period time when charging (sec) * @interval_not_charging charge alg cycle period time when not charging (sec) * @temp_hysteresis temperature hysteresis * @maxi maximization parameters * @cap_levels capacity in percent for the different capacity levels * @chg_params charger parameters * @fg_params fuel gauge parameters */ struct ab8500_bm_data { struct power_supply_battery_info *bi; int temp_now; int temp_interval_chg; int temp_interval_nochg; int main_safety_tmr_h; int usb_safety_tmr_h; int bkup_bat_v; int bkup_bat_i; bool capacity_scaling; bool chg_unknown_bat; bool enable_overshoot; bool auto_trig; int fg_res; int interval_charging; int interval_not_charging; int temp_hysteresis; const struct ab8500_maxim_parameters *maxi; const struct ab8500_bm_capacity_levels *cap_levels; const struct ab8500_bm_charger_parameters *chg_params; const struct ab8500_fg_parameters *fg_params; }; /* Forward declaration */ struct ab8500_fg; extern struct ab8500_bm_data ab8500_bm_data; void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA); struct ab8500_fg *ab8500_fg_get(void); int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev); int ab8500_fg_inst_curr_start(struct ab8500_fg *di); int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res); int ab8500_fg_inst_curr_started(struct ab8500_fg *di); int ab8500_fg_inst_curr_done(struct ab8500_fg *di); int ab8500_bm_of_probe(struct power_supply *psy, struct ab8500_bm_data *bm); void ab8500_bm_of_remove(struct power_supply *psy, struct ab8500_bm_data *bm); extern struct platform_driver ab8500_fg_driver; extern struct platform_driver ab8500_btemp_driver; extern struct platform_driver ab8500_chargalg_driver; #endif /* _AB8500_CHARGER_H_ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1