Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Guennadi Liakhovetski | 1033 | 80.39% | 2 | 16.67% |
Axel Lin | 243 | 18.91% | 6 | 50.00% |
Bhumika Goyal | 3 | 0.23% | 1 | 8.33% |
Matti Vaittinen | 3 | 0.23% | 1 | 8.33% |
Kuninori Morimoto | 2 | 0.16% | 1 | 8.33% |
Sachin Kamat | 1 | 0.08% | 1 | 8.33% |
Total | 1285 | 12 |
// SPDX-License-Identifier: GPL-2.0 /* * AS3711 PMIC regulator driver, using DCDC Step Down and LDO supplies * * Copyright (C) 2012 Renesas Electronics Corporation * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> */ #include <linux/err.h> #include <linux/init.h> #include <linux/mfd/as3711.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/regulator/driver.h> #include <linux/regulator/of_regulator.h> #include <linux/slab.h> /* * The regulator API supports 4 modes of operataion: FAST, NORMAL, IDLE and * STANDBY. We map them in the following way to AS3711 SD1-4 DCDC modes: * FAST: sdX_fast=1 * NORMAL: low_noise=1 * IDLE: low_noise=0 */ static int as3711_set_mode_sd(struct regulator_dev *rdev, unsigned int mode) { unsigned int fast_bit = rdev->desc->enable_mask, low_noise_bit = fast_bit << 4; u8 val; switch (mode) { case REGULATOR_MODE_FAST: val = fast_bit | low_noise_bit; break; case REGULATOR_MODE_NORMAL: val = low_noise_bit; break; case REGULATOR_MODE_IDLE: val = 0; break; default: return -EINVAL; } return regmap_update_bits(rdev->regmap, AS3711_SD_CONTROL_1, low_noise_bit | fast_bit, val); } static unsigned int as3711_get_mode_sd(struct regulator_dev *rdev) { unsigned int fast_bit = rdev->desc->enable_mask, low_noise_bit = fast_bit << 4, mask = fast_bit | low_noise_bit; unsigned int val; int ret = regmap_read(rdev->regmap, AS3711_SD_CONTROL_1, &val); if (ret < 0) return ret; if ((val & mask) == mask) return REGULATOR_MODE_FAST; if ((val & mask) == low_noise_bit) return REGULATOR_MODE_NORMAL; if (!(val & mask)) return REGULATOR_MODE_IDLE; return -EINVAL; } static const struct regulator_ops as3711_sd_ops = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, .get_mode = as3711_get_mode_sd, .set_mode = as3711_set_mode_sd, }; static const struct regulator_ops as3711_aldo_ops = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, }; static const struct regulator_ops as3711_dldo_ops = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, }; static const struct linear_range as3711_sd_ranges[] = { REGULATOR_LINEAR_RANGE(612500, 0x1, 0x40, 12500), REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000), REGULATOR_LINEAR_RANGE(2650000, 0x71, 0x7f, 50000), }; static const struct linear_range as3711_aldo_ranges[] = { REGULATOR_LINEAR_RANGE(1200000, 0, 0xf, 50000), REGULATOR_LINEAR_RANGE(1800000, 0x10, 0x1f, 100000), }; static const struct linear_range as3711_dldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 0x10, 50000), REGULATOR_LINEAR_RANGE(1750000, 0x20, 0x3f, 50000), }; #define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _sfx) \ [AS3711_REGULATOR_ ## _id] = { \ .name = "as3711-regulator-" # _id, \ .id = AS3711_REGULATOR_ ## _id, \ .n_voltages = (_vmask + 1), \ .ops = &as3711_ ## _sfx ## _ops, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ .vsel_reg = AS3711_ ## _id ## _VOLTAGE, \ .vsel_mask = _vmask, \ .enable_reg = AS3711_ ## _en_reg, \ .enable_mask = BIT(_en_bit), \ .linear_ranges = as3711_ ## _sfx ## _ranges, \ .n_linear_ranges = ARRAY_SIZE(as3711_ ## _sfx ## _ranges), \ } static const struct regulator_desc as3711_reg_desc[] = { AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, sd), AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, sd), AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, sd), AS3711_REG(SD_4, SD_CONTROL, 3, 0x7f, sd), AS3711_REG(LDO_1, LDO_1_VOLTAGE, 7, 0x1f, aldo), AS3711_REG(LDO_2, LDO_2_VOLTAGE, 7, 0x1f, aldo), AS3711_REG(LDO_3, LDO_3_VOLTAGE, 7, 0x3f, dldo), AS3711_REG(LDO_4, LDO_4_VOLTAGE, 7, 0x3f, dldo), AS3711_REG(LDO_5, LDO_5_VOLTAGE, 7, 0x3f, dldo), AS3711_REG(LDO_6, LDO_6_VOLTAGE, 7, 0x3f, dldo), AS3711_REG(LDO_7, LDO_7_VOLTAGE, 7, 0x3f, dldo), AS3711_REG(LDO_8, LDO_8_VOLTAGE, 7, 0x3f, dldo), /* StepUp output voltage depends on supplying regulator */ }; #define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_desc) static struct of_regulator_match as3711_regulator_matches[AS3711_REGULATOR_NUM] = { [AS3711_REGULATOR_SD_1] = { .name = "sd1" }, [AS3711_REGULATOR_SD_2] = { .name = "sd2" }, [AS3711_REGULATOR_SD_3] = { .name = "sd3" }, [AS3711_REGULATOR_SD_4] = { .name = "sd4" }, [AS3711_REGULATOR_LDO_1] = { .name = "ldo1" }, [AS3711_REGULATOR_LDO_2] = { .name = "ldo2" }, [AS3711_REGULATOR_LDO_3] = { .name = "ldo3" }, [AS3711_REGULATOR_LDO_4] = { .name = "ldo4" }, [AS3711_REGULATOR_LDO_5] = { .name = "ldo5" }, [AS3711_REGULATOR_LDO_6] = { .name = "ldo6" }, [AS3711_REGULATOR_LDO_7] = { .name = "ldo7" }, [AS3711_REGULATOR_LDO_8] = { .name = "ldo8" }, }; static int as3711_regulator_parse_dt(struct device *dev, struct device_node **of_node, const int count) { struct as3711_regulator_pdata *pdata = dev_get_platdata(dev); struct device_node *regulators = of_get_child_by_name(dev->parent->of_node, "regulators"); struct of_regulator_match *match; int ret, i; if (!regulators) { dev_err(dev, "regulator node not found\n"); return -ENODEV; } ret = of_regulator_match(dev->parent, regulators, as3711_regulator_matches, count); of_node_put(regulators); if (ret < 0) { dev_err(dev, "Error parsing regulator init data: %d\n", ret); return ret; } for (i = 0, match = as3711_regulator_matches; i < count; i++, match++) if (match->of_node) { pdata->init_data[i] = match->init_data; of_node[i] = match->of_node; } return 0; } static int as3711_regulator_probe(struct platform_device *pdev) { struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev); struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent); struct regulator_config config = {.dev = &pdev->dev,}; struct device_node *of_node[AS3711_REGULATOR_NUM] = {}; struct regulator_dev *rdev; int ret; int id; if (!pdata) { dev_err(&pdev->dev, "No platform data...\n"); return -ENODEV; } if (pdev->dev.parent->of_node) { ret = as3711_regulator_parse_dt(&pdev->dev, of_node, AS3711_REGULATOR_NUM); if (ret < 0) { dev_err(&pdev->dev, "DT parsing failed: %d\n", ret); return ret; } } for (id = 0; id < AS3711_REGULATOR_NUM; id++) { config.init_data = pdata->init_data[id]; config.regmap = as3711->regmap; config.of_node = of_node[id]; rdev = devm_regulator_register(&pdev->dev, &as3711_reg_desc[id], &config); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "Failed to register regulator %s\n", as3711_reg_desc[id].name); return PTR_ERR(rdev); } } return 0; } static struct platform_driver as3711_regulator_driver = { .driver = { .name = "as3711-regulator", }, .probe = as3711_regulator_probe, }; static int __init as3711_regulator_init(void) { return platform_driver_register(&as3711_regulator_driver); } subsys_initcall(as3711_regulator_init); static void __exit as3711_regulator_exit(void) { platform_driver_unregister(&as3711_regulator_driver); } module_exit(as3711_regulator_exit); MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); MODULE_DESCRIPTION("AS3711 regulator driver"); MODULE_ALIAS("platform:as3711-regulator"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1