| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Linus Torvalds (pre-git) | 601 | 54.19% | 2 | 28.57% |
| Doug Ledford | 325 | 29.31% | 1 | 14.29% |
| Alan Cox | 178 | 16.05% | 1 | 14.29% |
| Christoph Hellwig | 4 | 0.36% | 2 | 28.57% |
| John W. Fort | 1 | 0.09% | 1 | 14.29% |
| Total | 1109 | 7 |
/* * Initio A100 device driver for Linux. * * Copyright (c) 1994-1998 Initio Corporation * All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Revision History: * 06/18/98 HL, Initial production Version 1.02 * 12/19/98 bv, Use spinlocks for 2.1.95 and up * 06/25/02 Doug Ledford <dledford@redhat.com> * - This and the i60uscsi.h file are almost identical, * merged them into a single header used by both .c files. * 14/06/07 Alan Cox <alan@redhat.com> * - Grand cleanup and Linuxisation */ #define inia100_REVID "Initio INI-A100U2W SCSI device driver; Revision: 1.02d" #if 1 #define ORC_MAXQUEUE 245 #define ORC_MAXTAGS 64 #else #define ORC_MAXQUEUE 25 #define ORC_MAXTAGS 8 #endif #define TOTAL_SG_ENTRY 32 #define MAX_TARGETS 16 #define IMAX_CDB 15 #define SENSE_SIZE 14 /************************************************************************/ /* Scatter-Gather Element Structure */ /************************************************************************/ struct orc_sgent { u32 base; /* Data Pointer */ u32 length; /* Data Length */ }; /* SCSI related definition */ #define DISC_NOT_ALLOW 0x80 /* Disconnect is not allowed */ #define DISC_ALLOW 0xC0 /* Disconnect is allowed */ #define ORC_OFFSET_SCB 16 #define ORC_MAX_SCBS 250 #define MAX_CHANNELS 2 #define MAX_ESCB_ELE 64 #define TCF_DRV_255_63 0x0400 /********************************************************/ /* Orchid Host Command Set */ /********************************************************/ #define ORC_CMD_NOP 0x00 /* Host command - NOP */ #define ORC_CMD_VERSION 0x01 /* Host command - Get F/W version */ #define ORC_CMD_ECHO 0x02 /* Host command - ECHO */ #define ORC_CMD_SET_NVM 0x03 /* Host command - Set NVRAM */ #define ORC_CMD_GET_NVM 0x04 /* Host command - Get NVRAM */ #define ORC_CMD_GET_BUS_STATUS 0x05 /* Host command - Get SCSI bus status */ #define ORC_CMD_ABORT_SCB 0x06 /* Host command - Abort SCB */ #define ORC_CMD_ISSUE_SCB 0x07 /* Host command - Issue SCB */ /********************************************************/ /* Orchid Register Set */ /********************************************************/ #define ORC_GINTS 0xA0 /* Global Interrupt Status */ #define QINT 0x04 /* Reply Queue Interrupt */ #define ORC_GIMSK 0xA1 /* Global Interrupt MASK */ #define MQINT 0x04 /* Mask Reply Queue Interrupt */ #define ORC_GCFG 0xA2 /* Global Configure */ #define EEPRG 0x01 /* Enable EEPROM programming */ #define ORC_GSTAT 0xA3 /* Global status */ #define WIDEBUS 0x10 /* Wide SCSI Devices connected */ #define ORC_HDATA 0xA4 /* Host Data */ #define ORC_HCTRL 0xA5 /* Host Control */ #define SCSIRST 0x80 /* SCSI bus reset */ #define HDO 0x40 /* Host data out */ #define HOSTSTOP 0x02 /* Host stop RISC engine */ #define DEVRST 0x01 /* Device reset */ #define ORC_HSTUS 0xA6 /* Host Status */ #define HDI 0x02 /* Host data in */ #define RREADY 0x01 /* RISC engine is ready to receive */ #define ORC_NVRAM 0xA7 /* Nvram port address */ #define SE2CS 0x008 #define SE2CLK 0x004 #define SE2DO 0x002 #define SE2DI 0x001 #define ORC_PQUEUE 0xA8 /* Posting queue FIFO */ #define ORC_PQCNT 0xA9 /* Posting queue FIFO Cnt */ #define ORC_RQUEUE 0xAA /* Reply queue FIFO */ #define ORC_RQUEUECNT 0xAB /* Reply queue FIFO Cnt */ #define ORC_FWBASEADR 0xAC /* Firmware base address */ #define ORC_EBIOSADR0 0xB0 /* External Bios address */ #define ORC_EBIOSADR1 0xB1 /* External Bios address */ #define ORC_EBIOSADR2 0xB2 /* External Bios address */ #define ORC_EBIOSDATA 0xB3 /* External Bios address */ #define ORC_SCBSIZE 0xB7 /* SCB size register */ #define ORC_SCBBASE0 0xB8 /* SCB base address 0 */ #define ORC_SCBBASE1 0xBC /* SCB base address 1 */ #define ORC_RISCCTL 0xE0 /* RISC Control */ #define PRGMRST 0x002 #define DOWNLOAD 0x001 #define ORC_PRGMCTR0 0xE2 /* RISC program counter */ #define ORC_PRGMCTR1 0xE3 /* RISC program counter */ #define ORC_RISCRAM 0xEC /* RISC RAM data port 4 bytes */ struct orc_extended_scb { /* Extended SCB */ struct orc_sgent sglist[TOTAL_SG_ENTRY]; /*0 Start of SG list */ struct scsi_cmnd *srb; /*50 SRB Pointer */ }; /*********************************************************************** SCSI Control Block 0x40 bytes long, the last 8 are user bytes ************************************************************************/ struct orc_scb { /* Scsi_Ctrl_Blk */ u8 opcode; /*00 SCB command code&residual */ u8 flags; /*01 SCB Flags */ u8 target; /*02 Target Id */ u8 lun; /*03 Lun */ u32 reserved0; /*04 Reserved for ORCHID must 0 */ u32 xferlen; /*08 Data Transfer Length */ u32 reserved1; /*0C Reserved for ORCHID must 0 */ u32 sg_len; /*10 SG list # * 8 */ u32 sg_addr; /*14 SG List Buf physical Addr */ u32 sg_addrhigh; /*18 SG Buffer high physical Addr */ u8 hastat; /*1C Host Status */ u8 tastat; /*1D Target Status */ u8 status; /*1E SCB status */ u8 link; /*1F Link pointer, default 0xFF */ u8 sense_len; /*20 Sense Allocation Length */ u8 cdb_len; /*21 CDB Length */ u8 ident; /*22 Identify */ u8 tag_msg; /*23 Tag Message */ u8 cdb[IMAX_CDB]; /*24 SCSI CDBs */ u8 scbidx; /*3C Index for this ORCSCB */ u32 sense_addr; /*34 Sense Buffer physical Addr */ struct orc_extended_scb *escb; /*38 Extended SCB Pointer */ /* 64bit pointer or 32bit pointer + reserved ? */ #ifndef CONFIG_64BIT u8 reserved2[4]; /*3E Reserved for Driver use */ #endif }; /* Opcodes of ORCSCB_Opcode */ #define ORC_EXECSCSI 0x00 /* SCSI initiator command with residual */ #define ORC_BUSDEVRST 0x01 /* SCSI Bus Device Reset */ /* Status of ORCSCB_Status */ #define ORCSCB_COMPLETE 0x00 /* SCB request completed */ #define ORCSCB_POST 0x01 /* SCB is posted by the HOST */ /* Bit Definition for ORCSCB_Flags */ #define SCF_DISINT 0x01 /* Disable HOST interrupt */ #define SCF_DIR 0x18 /* Direction bits */ #define SCF_NO_DCHK 0x00 /* Direction determined by SCSI */ #define SCF_DIN 0x08 /* From Target to Initiator */ #define SCF_DOUT 0x10 /* From Initiator to Target */ #define SCF_NO_XF 0x18 /* No data transfer */ #define SCF_POLL 0x40 /* Error Codes for ORCSCB_HaStat */ #define HOST_SEL_TOUT 0x11 #define HOST_DO_DU 0x12 #define HOST_BUS_FREE 0x13 #define HOST_BAD_PHAS 0x14 #define HOST_INV_CMD 0x16 #define HOST_SCSI_RST 0x1B #define HOST_DEV_RST 0x1C /* Error Codes for ORCSCB_TaStat */ #define TARGET_CHK_COND 0x02 #define TARGET_BUSY 0x08 #define TARGET_TAG_FULL 0x28 /*********************************************************************** Target Device Control Structure **********************************************************************/ struct orc_target { u8 TCS_DrvDASD; /* 6 */ u8 TCS_DrvSCSI; /* 7 */ u8 TCS_DrvHead; /* 8 */ u16 TCS_DrvFlags; /* 4 */ u8 TCS_DrvSector; /* 7 */ }; /* Bit Definition for TCF_DrvFlags */ #define TCS_DF_NODASD_SUPT 0x20 /* Suppress OS/2 DASD Mgr support */ #define TCS_DF_NOSCSI_SUPT 0x40 /* Suppress OS/2 SCSI Mgr support */ /*********************************************************************** Host Adapter Control Structure ************************************************************************/ struct orc_host { unsigned long base; /* Base address */ u8 index; /* Index (Channel)*/ u8 scsi_id; /* H/A SCSI ID */ u8 BIOScfg; /*BIOS configuration */ u8 flags; u8 max_targets; /* SCSI0MAXTags */ struct orc_scb *scb_virt; /* Virtual Pointer to SCB array */ dma_addr_t scb_phys; /* Scb Physical address */ struct orc_extended_scb *escb_virt; /* Virtual pointer to ESCB Scatter list */ dma_addr_t escb_phys; /* scatter list Physical address */ u8 target_flag[16]; /* target configuration, TCF_EN_TAG */ u8 max_tags[16]; /* ORC_MAX_SCBS */ u32 allocation_map[MAX_CHANNELS][8]; /* Max STB is 256, So 256/32 */ spinlock_t allocation_lock; struct pci_dev *pdev; }; /* Bit Definition for HCS_Flags */ #define HCF_SCSI_RESET 0x01 /* SCSI BUS RESET */ #define HCF_PARITY 0x02 /* parity card */ #define HCF_LVDS 0x10 /* parity card */ /* Bit Definition for TargetFlag */ #define TCF_EN_255 0x08 #define TCF_EN_TAG 0x10 #define TCF_BUSY 0x20 #define TCF_DISCONNECT 0x40 #define TCF_SPIN_UP 0x80 /* Bit Definition for HCS_AFlags */ #define HCS_AF_IGNORE 0x01 /* Adapter ignore */ #define HCS_AF_DISABLE_RESET 0x10 /* Adapter disable reset */ #define HCS_AF_DISABLE_ADPT 0x80 /* Adapter disable */ struct orc_nvram { /*----------header ---------------*/ u8 SubVendorID0; /* 00 - Sub Vendor ID */ u8 SubVendorID1; /* 00 - Sub Vendor ID */ u8 SubSysID0; /* 02 - Sub System ID */ u8 SubSysID1; /* 02 - Sub System ID */ u8 SubClass; /* 04 - Sub Class */ u8 VendorID0; /* 05 - Vendor ID */ u8 VendorID1; /* 05 - Vendor ID */ u8 DeviceID0; /* 07 - Device ID */ u8 DeviceID1; /* 07 - Device ID */ u8 Reserved0[2]; /* 09 - Reserved */ u8 revision; /* 0B - revision of data structure */ /* ----Host Adapter Structure ---- */ u8 NumOfCh; /* 0C - Number of SCSI channel */ u8 BIOSConfig1; /* 0D - BIOS configuration 1 */ u8 BIOSConfig2; /* 0E - BIOS boot channel&target ID */ u8 BIOSConfig3; /* 0F - BIOS configuration 3 */ /* ----SCSI channel Structure ---- */ /* from "CTRL-I SCSI Host Adapter SetUp menu " */ u8 scsi_id; /* 10 - Channel 0 SCSI ID */ u8 SCSI0Config; /* 11 - Channel 0 SCSI configuration */ u8 SCSI0MaxTags; /* 12 - Channel 0 Maximum tags */ u8 SCSI0ResetTime; /* 13 - Channel 0 Reset recovering time */ u8 ReservedforChannel0[2]; /* 14 - Reserved */ /* ----SCSI target Structure ---- */ /* from "CTRL-I SCSI device SetUp menu " */ u8 Target00Config; /* 16 - Channel 0 Target 0 config */ u8 Target01Config; /* 17 - Channel 0 Target 1 config */ u8 Target02Config; /* 18 - Channel 0 Target 2 config */ u8 Target03Config; /* 19 - Channel 0 Target 3 config */ u8 Target04Config; /* 1A - Channel 0 Target 4 config */ u8 Target05Config; /* 1B - Channel 0 Target 5 config */ u8 Target06Config; /* 1C - Channel 0 Target 6 config */ u8 Target07Config; /* 1D - Channel 0 Target 7 config */ u8 Target08Config; /* 1E - Channel 0 Target 8 config */ u8 Target09Config; /* 1F - Channel 0 Target 9 config */ u8 Target0AConfig; /* 20 - Channel 0 Target A config */ u8 Target0BConfig; /* 21 - Channel 0 Target B config */ u8 Target0CConfig; /* 22 - Channel 0 Target C config */ u8 Target0DConfig; /* 23 - Channel 0 Target D config */ u8 Target0EConfig; /* 24 - Channel 0 Target E config */ u8 Target0FConfig; /* 25 - Channel 0 Target F config */ u8 SCSI1Id; /* 26 - Channel 1 SCSI ID */ u8 SCSI1Config; /* 27 - Channel 1 SCSI configuration */ u8 SCSI1MaxTags; /* 28 - Channel 1 Maximum tags */ u8 SCSI1ResetTime; /* 29 - Channel 1 Reset recovering time */ u8 ReservedforChannel1[2]; /* 2A - Reserved */ /* ----SCSI target Structure ---- */ /* from "CTRL-I SCSI device SetUp menu " */ u8 Target10Config; /* 2C - Channel 1 Target 0 config */ u8 Target11Config; /* 2D - Channel 1 Target 1 config */ u8 Target12Config; /* 2E - Channel 1 Target 2 config */ u8 Target13Config; /* 2F - Channel 1 Target 3 config */ u8 Target14Config; /* 30 - Channel 1 Target 4 config */ u8 Target15Config; /* 31 - Channel 1 Target 5 config */ u8 Target16Config; /* 32 - Channel 1 Target 6 config */ u8 Target17Config; /* 33 - Channel 1 Target 7 config */ u8 Target18Config; /* 34 - Channel 1 Target 8 config */ u8 Target19Config; /* 35 - Channel 1 Target 9 config */ u8 Target1AConfig; /* 36 - Channel 1 Target A config */ u8 Target1BConfig; /* 37 - Channel 1 Target B config */ u8 Target1CConfig; /* 38 - Channel 1 Target C config */ u8 Target1DConfig; /* 39 - Channel 1 Target D config */ u8 Target1EConfig; /* 3A - Channel 1 Target E config */ u8 Target1FConfig; /* 3B - Channel 1 Target F config */ u8 reserved[3]; /* 3C - Reserved */ /* ---------- CheckSum ---------- */ u8 CheckSum; /* 3F - Checksum of NVRam */ }; /* Bios Configuration for nvram->BIOSConfig1 */ #define NBC_BIOSENABLE 0x01 /* BIOS enable */ #define NBC_CDROM 0x02 /* Support bootable CDROM */ #define NBC_REMOVABLE 0x04 /* Support removable drive */ /* Bios Configuration for nvram->BIOSConfig2 */ #define NBB_TARGET_MASK 0x0F /* Boot SCSI target ID number */ #define NBB_CHANL_MASK 0xF0 /* Boot SCSI channel number */ /* Bit definition for nvram->SCSIConfig */ #define NCC_BUSRESET 0x01 /* Reset SCSI bus at power up */ #define NCC_PARITYCHK 0x02 /* SCSI parity enable */ #define NCC_LVDS 0x10 /* Enable LVDS */ #define NCC_ACTTERM1 0x20 /* Enable active terminator 1 */ #define NCC_ACTTERM2 0x40 /* Enable active terminator 2 */ #define NCC_AUTOTERM 0x80 /* Enable auto termination */ /* Bit definition for nvram->TargetxConfig */ #define NTC_PERIOD 0x07 /* Maximum Sync. Speed */ #define NTC_1GIGA 0x08 /* 255 head / 63 sectors (64/32) */ #define NTC_NO_SYNC 0x10 /* NO SYNC. NEGO */ #define NTC_NO_WIDESYNC 0x20 /* NO WIDE SYNC. NEGO */ #define NTC_DISC_ENABLE 0x40 /* Enable SCSI disconnect */ #define NTC_SPINUP 0x80 /* Start disk drive */ /* Default NVRam values */ #define NBC_DEFAULT (NBC_ENABLE) #define NCC_DEFAULT (NCC_BUSRESET | NCC_AUTOTERM | NCC_PARITYCHK) #define NCC_MAX_TAGS 0x20 /* Maximum tags per target */ #define NCC_RESET_TIME 0x0A /* SCSI RESET recovering time */ #define NTC_DEFAULT (NTC_1GIGA | NTC_NO_WIDESYNC | NTC_DISC_ENABLE)
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1