Contributors: 5
Author Tokens Token Proportion Commits Commit Proportion
Phillip Potter 177 69.14% 1 14.29%
Pavel Skripkin 70 27.34% 2 28.57%
Martin Kaiser 3 1.17% 1 14.29%
Greg Kroah-Hartman 3 1.17% 1 14.29%
Larry Finger 3 1.17% 2 28.57%
Total 256 7 


// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 2007 - 2011 Realtek Corporation. */

#define _RTW_EFUSE_C_

#include "../include/osdep_service.h"
#include "../include/drv_types.h"
#include "../include/rtw_efuse.h"
#include "../include/rtl8188e_hal.h"

/*  */
/* 	Description: */
/* 		Execute E-Fuse read byte operation. */
/* 		Referred from SD1 Richard. */
/*  */
/* 	Assumption: */
/* 		1. Boot from E-Fuse and successfully auto-load. */
/* 		2. PASSIVE_LEVEL (USB interface) */
/*  */
/* 	Created by Roger, 2008.10.21. */
/*  */
void
ReadEFuseByte(
		struct adapter *Adapter,
		u16 _offset,
		u8 *pbuf)
{
	u32 value32;
	u8 readbyte;
	u16 retry;
	int res;

	/* Write Address */
	rtw_write8(Adapter, EFUSE_CTRL + 1, (_offset & 0xff));
	res = rtw_read8(Adapter, EFUSE_CTRL + 2, &readbyte);
	if (res)
		return;

	rtw_write8(Adapter, EFUSE_CTRL + 2, ((_offset >> 8) & 0x03) | (readbyte & 0xfc));

	/* Write bit 32 0 */
	res = rtw_read8(Adapter, EFUSE_CTRL + 3, &readbyte);
	if (res)
		return;

	rtw_write8(Adapter, EFUSE_CTRL + 3, (readbyte & 0x7f));

	/* Check bit 32 read-ready */
	res = rtw_read32(Adapter, EFUSE_CTRL, &value32);
	if (res)
		return;

	for (retry = 0; retry < 10000; retry++) {
		res = rtw_read32(Adapter, EFUSE_CTRL, &value32);
		if (res)
			continue;

		if (((value32 >> 24) & 0xff) & 0x80)
			break;
	}

	/*  20100205 Joseph: Add delay suggested by SD1 Victor. */
	/*  This fix the problem that Efuse read error in high temperature condition. */
	/*  Designer says that there shall be some delay after ready bit is set, or the */
	/*  result will always stay on last data we read. */
	udelay(50);
	res = rtw_read32(Adapter, EFUSE_CTRL, &value32);
	if (res)
		return;

	*pbuf = (u8)(value32 & 0xff);

	/* FIXME: return an error to caller */
}