Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Angelo G. Del Regno | 1365 | 54.08% | 1 | 16.67% |
Amit Kucheria | 1147 | 45.44% | 2 | 33.33% |
Srinivas Kandagatla | 5 | 0.20% | 1 | 16.67% |
Gustavo A. R. Silva | 4 | 0.16% | 1 | 16.67% |
Konrad Dybcio | 3 | 0.12% | 1 | 16.67% |
Total | 2524 | 6 |
// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2019, Linaro Limited */ #include <linux/bitops.h> #include <linux/regmap.h> #include <linux/delay.h> #include <linux/slab.h> #include "tsens.h" /* ----- SROT ------ */ #define SROT_HW_VER_OFF 0x0000 #define SROT_CTRL_OFF 0x0004 /* ----- TM ------ */ #define TM_INT_EN_OFF 0x0000 #define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF 0x0004 #define TM_Sn_STATUS_OFF 0x0044 #define TM_TRDY_OFF 0x0084 #define TM_HIGH_LOW_INT_STATUS_OFF 0x0088 #define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF 0x0090 /* eeprom layout data for msm8956/76 (v1) */ #define MSM8976_BASE0_MASK 0xff #define MSM8976_BASE1_MASK 0xff #define MSM8976_BASE1_SHIFT 8 #define MSM8976_S0_P1_MASK 0x3f00 #define MSM8976_S1_P1_MASK 0x3f00000 #define MSM8976_S2_P1_MASK 0x3f #define MSM8976_S3_P1_MASK 0x3f000 #define MSM8976_S4_P1_MASK 0x3f00 #define MSM8976_S5_P1_MASK 0x3f00000 #define MSM8976_S6_P1_MASK 0x3f #define MSM8976_S7_P1_MASK 0x3f000 #define MSM8976_S8_P1_MASK 0x1f8 #define MSM8976_S9_P1_MASK 0x1f8000 #define MSM8976_S10_P1_MASK 0xf8000000 #define MSM8976_S10_P1_MASK_1 0x1 #define MSM8976_S0_P2_MASK 0xfc000 #define MSM8976_S1_P2_MASK 0xfc000000 #define MSM8976_S2_P2_MASK 0xfc0 #define MSM8976_S3_P2_MASK 0xfc0000 #define MSM8976_S4_P2_MASK 0xfc000 #define MSM8976_S5_P2_MASK 0xfc000000 #define MSM8976_S6_P2_MASK 0xfc0 #define MSM8976_S7_P2_MASK 0xfc0000 #define MSM8976_S8_P2_MASK 0x7e00 #define MSM8976_S9_P2_MASK 0x7e00000 #define MSM8976_S10_P2_MASK 0x7e #define MSM8976_S0_P1_SHIFT 8 #define MSM8976_S1_P1_SHIFT 20 #define MSM8976_S2_P1_SHIFT 0 #define MSM8976_S3_P1_SHIFT 12 #define MSM8976_S4_P1_SHIFT 8 #define MSM8976_S5_P1_SHIFT 20 #define MSM8976_S6_P1_SHIFT 0 #define MSM8976_S7_P1_SHIFT 12 #define MSM8976_S8_P1_SHIFT 3 #define MSM8976_S9_P1_SHIFT 15 #define MSM8976_S10_P1_SHIFT 27 #define MSM8976_S10_P1_SHIFT_1 0 #define MSM8976_S0_P2_SHIFT 14 #define MSM8976_S1_P2_SHIFT 26 #define MSM8976_S2_P2_SHIFT 6 #define MSM8976_S3_P2_SHIFT 18 #define MSM8976_S4_P2_SHIFT 14 #define MSM8976_S5_P2_SHIFT 26 #define MSM8976_S6_P2_SHIFT 6 #define MSM8976_S7_P2_SHIFT 18 #define MSM8976_S8_P2_SHIFT 9 #define MSM8976_S9_P2_SHIFT 21 #define MSM8976_S10_P2_SHIFT 1 #define MSM8976_CAL_SEL_MASK 0x3 #define MSM8976_CAL_DEGC_PT1 30 #define MSM8976_CAL_DEGC_PT2 120 #define MSM8976_SLOPE_FACTOR 1000 #define MSM8976_SLOPE_DEFAULT 3200 /* eeprom layout data for qcs404/405 (v1) */ #define BASE0_MASK 0x000007f8 #define BASE1_MASK 0x0007f800 #define BASE0_SHIFT 3 #define BASE1_SHIFT 11 #define S0_P1_MASK 0x0000003f #define S1_P1_MASK 0x0003f000 #define S2_P1_MASK 0x3f000000 #define S3_P1_MASK 0x000003f0 #define S4_P1_MASK 0x003f0000 #define S5_P1_MASK 0x0000003f #define S6_P1_MASK 0x0003f000 #define S7_P1_MASK 0x3f000000 #define S8_P1_MASK 0x000003f0 #define S9_P1_MASK 0x003f0000 #define S0_P2_MASK 0x00000fc0 #define S1_P2_MASK 0x00fc0000 #define S2_P2_MASK_1_0 0xc0000000 #define S2_P2_MASK_5_2 0x0000000f #define S3_P2_MASK 0x0000fc00 #define S4_P2_MASK 0x0fc00000 #define S5_P2_MASK 0x00000fc0 #define S6_P2_MASK 0x00fc0000 #define S7_P2_MASK_1_0 0xc0000000 #define S7_P2_MASK_5_2 0x0000000f #define S8_P2_MASK 0x0000fc00 #define S9_P2_MASK 0x0fc00000 #define S0_P1_SHIFT 0 #define S0_P2_SHIFT 6 #define S1_P1_SHIFT 12 #define S1_P2_SHIFT 18 #define S2_P1_SHIFT 24 #define S2_P2_SHIFT_1_0 30 #define S2_P2_SHIFT_5_2 0 #define S3_P1_SHIFT 4 #define S3_P2_SHIFT 10 #define S4_P1_SHIFT 16 #define S4_P2_SHIFT 22 #define S5_P1_SHIFT 0 #define S5_P2_SHIFT 6 #define S6_P1_SHIFT 12 #define S6_P2_SHIFT 18 #define S7_P1_SHIFT 24 #define S7_P2_SHIFT_1_0 30 #define S7_P2_SHIFT_5_2 0 #define S8_P1_SHIFT 4 #define S8_P2_SHIFT 10 #define S9_P1_SHIFT 16 #define S9_P2_SHIFT 22 #define CAL_SEL_MASK 7 #define CAL_SEL_SHIFT 0 static void compute_intercept_slope_8976(struct tsens_priv *priv, u32 *p1, u32 *p2, u32 mode) { int i; priv->sensor[0].slope = 3313; priv->sensor[1].slope = 3275; priv->sensor[2].slope = 3320; priv->sensor[3].slope = 3246; priv->sensor[4].slope = 3279; priv->sensor[5].slope = 3257; priv->sensor[6].slope = 3234; priv->sensor[7].slope = 3269; priv->sensor[8].slope = 3255; priv->sensor[9].slope = 3239; priv->sensor[10].slope = 3286; for (i = 0; i < priv->num_sensors; i++) { priv->sensor[i].offset = (p1[i] * MSM8976_SLOPE_FACTOR) - (MSM8976_CAL_DEGC_PT1 * priv->sensor[i].slope); } } static int calibrate_v1(struct tsens_priv *priv) { u32 base0 = 0, base1 = 0; u32 p1[10], p2[10]; u32 mode = 0, lsb = 0, msb = 0; u32 *qfprom_cdata; int i; qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); if (IS_ERR(qfprom_cdata)) return PTR_ERR(qfprom_cdata); mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT; dev_dbg(priv->dev, "calibration mode is %d\n", mode); switch (mode) { case TWO_PT_CALIB: base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT; p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT; p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT; /* This value is split over two registers, 2 bits and 4 bits */ lsb = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0; msb = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2; p2[2] = msb << 2 | lsb; p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT; p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT; p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT; p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT; /* This value is split over two registers, 2 bits and 4 bits */ lsb = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0; msb = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2; p2[7] = msb << 2 | lsb; p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT; p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT; for (i = 0; i < priv->num_sensors; i++) p2[i] = ((base1 + p2[i]) << 2); fallthrough; case ONE_PT_CALIB2: base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT; p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT; p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT; p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT; p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT; p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT; p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT; p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT; p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT; p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT; p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT; for (i = 0; i < priv->num_sensors; i++) p1[i] = (((base0) + p1[i]) << 2); break; default: for (i = 0; i < priv->num_sensors; i++) { p1[i] = 500; p2[i] = 780; } break; } compute_intercept_slope(priv, p1, p2, mode); kfree(qfprom_cdata); return 0; } static int calibrate_8976(struct tsens_priv *priv) { int base0 = 0, base1 = 0, i; u32 p1[11], p2[11]; int mode = 0, tmp = 0; u32 *qfprom_cdata; qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); if (IS_ERR(qfprom_cdata)) return PTR_ERR(qfprom_cdata); mode = (qfprom_cdata[4] & MSM8976_CAL_SEL_MASK); dev_dbg(priv->dev, "calibration mode is %d\n", mode); switch (mode) { case TWO_PT_CALIB: base1 = (qfprom_cdata[2] & MSM8976_BASE1_MASK) >> MSM8976_BASE1_SHIFT; p2[0] = (qfprom_cdata[0] & MSM8976_S0_P2_MASK) >> MSM8976_S0_P2_SHIFT; p2[1] = (qfprom_cdata[0] & MSM8976_S1_P2_MASK) >> MSM8976_S1_P2_SHIFT; p2[2] = (qfprom_cdata[1] & MSM8976_S2_P2_MASK) >> MSM8976_S2_P2_SHIFT; p2[3] = (qfprom_cdata[1] & MSM8976_S3_P2_MASK) >> MSM8976_S3_P2_SHIFT; p2[4] = (qfprom_cdata[2] & MSM8976_S4_P2_MASK) >> MSM8976_S4_P2_SHIFT; p2[5] = (qfprom_cdata[2] & MSM8976_S5_P2_MASK) >> MSM8976_S5_P2_SHIFT; p2[6] = (qfprom_cdata[3] & MSM8976_S6_P2_MASK) >> MSM8976_S6_P2_SHIFT; p2[7] = (qfprom_cdata[3] & MSM8976_S7_P2_MASK) >> MSM8976_S7_P2_SHIFT; p2[8] = (qfprom_cdata[4] & MSM8976_S8_P2_MASK) >> MSM8976_S8_P2_SHIFT; p2[9] = (qfprom_cdata[4] & MSM8976_S9_P2_MASK) >> MSM8976_S9_P2_SHIFT; p2[10] = (qfprom_cdata[5] & MSM8976_S10_P2_MASK) >> MSM8976_S10_P2_SHIFT; for (i = 0; i < priv->num_sensors; i++) p2[i] = ((base1 + p2[i]) << 2); fallthrough; case ONE_PT_CALIB2: base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK; p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT; p1[1] = (qfprom_cdata[0] & MSM8976_S1_P1_MASK) >> MSM8976_S1_P1_SHIFT; p1[2] = (qfprom_cdata[1] & MSM8976_S2_P1_MASK) >> MSM8976_S2_P1_SHIFT; p1[3] = (qfprom_cdata[1] & MSM8976_S3_P1_MASK) >> MSM8976_S3_P1_SHIFT; p1[4] = (qfprom_cdata[2] & MSM8976_S4_P1_MASK) >> MSM8976_S4_P1_SHIFT; p1[5] = (qfprom_cdata[2] & MSM8976_S5_P1_MASK) >> MSM8976_S5_P1_SHIFT; p1[6] = (qfprom_cdata[3] & MSM8976_S6_P1_MASK) >> MSM8976_S6_P1_SHIFT; p1[7] = (qfprom_cdata[3] & MSM8976_S7_P1_MASK) >> MSM8976_S7_P1_SHIFT; p1[8] = (qfprom_cdata[4] & MSM8976_S8_P1_MASK) >> MSM8976_S8_P1_SHIFT; p1[9] = (qfprom_cdata[4] & MSM8976_S9_P1_MASK) >> MSM8976_S9_P1_SHIFT; p1[10] = (qfprom_cdata[4] & MSM8976_S10_P1_MASK) >> MSM8976_S10_P1_SHIFT; tmp = (qfprom_cdata[5] & MSM8976_S10_P1_MASK_1) << MSM8976_S10_P1_SHIFT_1; p1[10] |= tmp; for (i = 0; i < priv->num_sensors; i++) p1[i] = (((base0) + p1[i]) << 2); break; default: for (i = 0; i < priv->num_sensors; i++) { p1[i] = 500; p2[i] = 780; } break; } compute_intercept_slope_8976(priv, p1, p2, mode); kfree(qfprom_cdata); return 0; } /* v1.x: msm8956,8976,qcs404,405 */ static struct tsens_features tsens_v1_feat = { .ver_major = VER_1_X, .crit_int = 0, .adc = 1, .srot_split = 1, .max_sensors = 11, }; static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { /* ----- SROT ------ */ /* VERSION */ [VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31), [VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27), [VER_STEP] = REG_FIELD(SROT_HW_VER_OFF, 0, 15), /* CTRL_OFFSET */ [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0), [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1), [SENSOR_EN] = REG_FIELD(SROT_CTRL_OFF, 3, 13), /* ----- TM ------ */ /* INTERRUPT ENABLE */ [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0), /* UPPER/LOWER TEMPERATURE THRESHOLDS */ REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 0, 9), REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19), /* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */ REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20), REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21), [LOW_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 0, 0), [LOW_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 1, 1), [LOW_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 2, 2), [LOW_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 3, 3), [LOW_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 4, 4), [LOW_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 5, 5), [LOW_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 6, 6), [LOW_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 7, 7), [UP_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 8, 8), [UP_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 9, 9), [UP_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 10, 10), [UP_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 11, 11), [UP_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 12, 12), [UP_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 13, 13), [UP_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 14, 14), [UP_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 15, 15), /* NO CRITICAL INTERRUPT SUPPORT on v1 */ /* Sn_STATUS */ REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9), REG_FIELD_FOR_EACH_SENSOR11(VALID, TM_Sn_STATUS_OFF, 14, 14), /* xxx_STATUS bits: 1 == threshold violated */ REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10), REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11), REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12), /* No CRITICAL field on v1.x */ REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS, TM_Sn_STATUS_OFF, 13, 13), /* TRDY: 1=ready, 0=in progress */ [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), }; static const struct tsens_ops ops_generic_v1 = { .init = init_common, .calibrate = calibrate_v1, .get_temp = get_temp_tsens_valid, }; struct tsens_plat_data data_tsens_v1 = { .ops = &ops_generic_v1, .feat = &tsens_v1_feat, .fields = tsens_v1_regfields, }; static const struct tsens_ops ops_8976 = { .init = init_common, .calibrate = calibrate_8976, .get_temp = get_temp_tsens_valid, }; /* Valid for both MSM8956 and MSM8976. */ struct tsens_plat_data data_8976 = { .num_sensors = 11, .ops = &ops_8976, .hw_ids = (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10}, .feat = &tsens_v1_feat, .fields = tsens_v1_regfields, };
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1