Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Mika Westerberg | 5628 | 76.08% | 50 | 68.49% |
Andreas Noever | 812 | 10.98% | 8 | 10.96% |
Rajmohan Mani | 594 | 8.03% | 3 | 4.11% |
Gil Fine | 186 | 2.51% | 6 | 8.22% |
Sanjay R Mehta | 135 | 1.83% | 1 | 1.37% |
Kranthi Kuntala | 26 | 0.35% | 1 | 1.37% |
Szuying Chen | 8 | 0.11% | 1 | 1.37% |
Lee Jones | 6 | 0.08% | 1 | 1.37% |
Greg Kroah-Hartman | 1 | 0.01% | 1 | 1.37% |
Lukas Wunner | 1 | 0.01% | 1 | 1.37% |
Total | 7397 | 73 |
// SPDX-License-Identifier: GPL-2.0 /* * Thunderbolt driver - bus logic (NHI independent) * * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com> * Copyright (C) 2019, Intel Corporation */ #include <linux/slab.h> #include <linux/errno.h> #include <linux/delay.h> #include <linux/pm_runtime.h> #include <linux/platform_data/x86/apple.h> #include "tb.h" #include "tb_regs.h" #include "tunnel.h" #define TB_TIMEOUT 100 /* ms */ /** * struct tb_cm - Simple Thunderbolt connection manager * @tunnel_list: List of active tunnels * @dp_resources: List of available DP resources for DP tunneling * @hotplug_active: tb_handle_hotplug will stop progressing plug * events and exit if this is not set (it needs to * acquire the lock one more time). Used to drain wq * after cfg has been paused. * @remove_work: Work used to remove any unplugged routers after * runtime resume */ struct tb_cm { struct list_head tunnel_list; struct list_head dp_resources; bool hotplug_active; struct delayed_work remove_work; }; static inline struct tb *tcm_to_tb(struct tb_cm *tcm) { return ((void *)tcm - sizeof(struct tb)); } struct tb_hotplug_event { struct work_struct work; struct tb *tb; u64 route; u8 port; bool unplug; }; static void tb_handle_hotplug(struct work_struct *work); static void tb_queue_hotplug(struct tb *tb, u64 route, u8 port, bool unplug) { struct tb_hotplug_event *ev; ev = kmalloc(sizeof(*ev), GFP_KERNEL); if (!ev) return; ev->tb = tb; ev->route = route; ev->port = port; ev->unplug = unplug; INIT_WORK(&ev->work, tb_handle_hotplug); queue_work(tb->wq, &ev->work); } /* enumeration & hot plug handling */ static void tb_add_dp_resources(struct tb_switch *sw) { struct tb_cm *tcm = tb_priv(sw->tb); struct tb_port *port; tb_switch_for_each_port(sw, port) { if (!tb_port_is_dpin(port)) continue; if (!tb_switch_query_dp_resource(sw, port)) continue; list_add_tail(&port->list, &tcm->dp_resources); tb_port_dbg(port, "DP IN resource available\n"); } } static void tb_remove_dp_resources(struct tb_switch *sw) { struct tb_cm *tcm = tb_priv(sw->tb); struct tb_port *port, *tmp; /* Clear children resources first */ tb_switch_for_each_port(sw, port) { if (tb_port_has_remote(port)) tb_remove_dp_resources(port->remote->sw); } list_for_each_entry_safe(port, tmp, &tcm->dp_resources, list) { if (port->sw == sw) { tb_port_dbg(port, "DP OUT resource unavailable\n"); list_del_init(&port->list); } } } static void tb_discover_dp_resource(struct tb *tb, struct tb_port *port) { struct tb_cm *tcm = tb_priv(tb); struct tb_port *p; list_for_each_entry(p, &tcm->dp_resources, list) { if (p == port) return; } tb_port_dbg(port, "DP %s resource available discovered\n", tb_port_is_dpin(port) ? "IN" : "OUT"); list_add_tail(&port->list, &tcm->dp_resources); } static void tb_discover_dp_resources(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); struct tb_tunnel *tunnel; list_for_each_entry(tunnel, &tcm->tunnel_list, list) { if (tb_tunnel_is_dp(tunnel)) tb_discover_dp_resource(tb, tunnel->dst_port); } } static void tb_switch_discover_tunnels(struct tb_switch *sw, struct list_head *list, bool alloc_hopids) { struct tb *tb = sw->tb; struct tb_port *port; tb_switch_for_each_port(sw, port) { struct tb_tunnel *tunnel = NULL; switch (port->config.type) { case TB_TYPE_DP_HDMI_IN: tunnel = tb_tunnel_discover_dp(tb, port, alloc_hopids); /* * In case of DP tunnel exists, change host router's * 1st children TMU mode to HiFi for CL0s to work. */ if (tunnel) tb_switch_enable_tmu_1st_child(tb->root_switch, TB_SWITCH_TMU_RATE_HIFI); break; case TB_TYPE_PCIE_DOWN: tunnel = tb_tunnel_discover_pci(tb, port, alloc_hopids); break; case TB_TYPE_USB3_DOWN: tunnel = tb_tunnel_discover_usb3(tb, port, alloc_hopids); break; default: break; } if (tunnel) list_add_tail(&tunnel->list, list); } tb_switch_for_each_port(sw, port) { if (tb_port_has_remote(port)) { tb_switch_discover_tunnels(port->remote->sw, list, alloc_hopids); } } } static void tb_discover_tunnels(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); struct tb_tunnel *tunnel; tb_switch_discover_tunnels(tb->root_switch, &tcm->tunnel_list, true); list_for_each_entry(tunnel, &tcm->tunnel_list, list) { if (tb_tunnel_is_pci(tunnel)) { struct tb_switch *parent = tunnel->dst_port->sw; while (parent != tunnel->src_port->sw) { parent->boot = true; parent = tb_switch_parent(parent); } } else if (tb_tunnel_is_dp(tunnel)) { /* Keep the domain from powering down */ pm_runtime_get_sync(&tunnel->src_port->sw->dev); pm_runtime_get_sync(&tunnel->dst_port->sw->dev); } } } static int tb_port_configure_xdomain(struct tb_port *port, struct tb_xdomain *xd) { if (tb_switch_is_usb4(port->sw)) return usb4_port_configure_xdomain(port, xd); return tb_lc_configure_xdomain(port); } static void tb_port_unconfigure_xdomain(struct tb_port *port) { if (tb_switch_is_usb4(port->sw)) usb4_port_unconfigure_xdomain(port); else tb_lc_unconfigure_xdomain(port); tb_port_enable(port->dual_link_port); } static void tb_scan_xdomain(struct tb_port *port) { struct tb_switch *sw = port->sw; struct tb *tb = sw->tb; struct tb_xdomain *xd; u64 route; if (!tb_is_xdomain_enabled()) return; route = tb_downstream_route(port); xd = tb_xdomain_find_by_route(tb, route); if (xd) { tb_xdomain_put(xd); return; } xd = tb_xdomain_alloc(tb, &sw->dev, route, tb->root_switch->uuid, NULL); if (xd) { tb_port_at(route, sw)->xdomain = xd; tb_port_configure_xdomain(port, xd); tb_xdomain_add(xd); } } static int tb_enable_tmu(struct tb_switch *sw) { int ret; /* If it is already enabled in correct mode, don't touch it */ if (tb_switch_tmu_is_enabled(sw, sw->tmu.unidirectional_request)) return 0; ret = tb_switch_tmu_disable(sw); if (ret) return ret; ret = tb_switch_tmu_post_time(sw); if (ret) return ret; return tb_switch_tmu_enable(sw); } /** * tb_find_unused_port() - return the first inactive port on @sw * @sw: Switch to find the port on * @type: Port type to look for */ static struct tb_port *tb_find_unused_port(struct tb_switch *sw, enum tb_port_type type) { struct tb_port *port; tb_switch_for_each_port(sw, port) { if (tb_is_upstream_port(port)) continue; if (port->config.type != type) continue; if (!port->cap_adap) continue; if (tb_port_is_enabled(port)) continue; return port; } return NULL; } static struct tb_port *tb_find_usb3_down(struct tb_switch *sw, const struct tb_port *port) { struct tb_port *down; down = usb4_switch_map_usb3_down(sw, port); if (down && !tb_usb3_port_is_enabled(down)) return down; return NULL; } static struct tb_tunnel *tb_find_tunnel(struct tb *tb, enum tb_tunnel_type type, struct tb_port *src_port, struct tb_port *dst_port) { struct tb_cm *tcm = tb_priv(tb); struct tb_tunnel *tunnel; list_for_each_entry(tunnel, &tcm->tunnel_list, list) { if (tunnel->type == type && ((src_port && src_port == tunnel->src_port) || (dst_port && dst_port == tunnel->dst_port))) { return tunnel; } } return NULL; } static struct tb_tunnel *tb_find_first_usb3_tunnel(struct tb *tb, struct tb_port *src_port, struct tb_port *dst_port) { struct tb_port *port, *usb3_down; struct tb_switch *sw; /* Pick the router that is deepest in the topology */ if (dst_port->sw->config.depth > src_port->sw->config.depth) sw = dst_port->sw; else sw = src_port->sw; /* Can't be the host router */ if (sw == tb->root_switch) return NULL; /* Find the downstream USB4 port that leads to this router */ port = tb_port_at(tb_route(sw), tb->root_switch); /* Find the corresponding host router USB3 downstream port */ usb3_down = usb4_switch_map_usb3_down(tb->root_switch, port); if (!usb3_down) return NULL; return tb_find_tunnel(tb, TB_TUNNEL_USB3, usb3_down, NULL); } static int tb_available_bandwidth(struct tb *tb, struct tb_port *src_port, struct tb_port *dst_port, int *available_up, int *available_down) { int usb3_consumed_up, usb3_consumed_down, ret; struct tb_cm *tcm = tb_priv(tb); struct tb_tunnel *tunnel; struct tb_port *port; tb_port_dbg(dst_port, "calculating available bandwidth\n"); tunnel = tb_find_first_usb3_tunnel(tb, src_port, dst_port); if (tunnel) { ret = tb_tunnel_consumed_bandwidth(tunnel, &usb3_consumed_up, &usb3_consumed_down); if (ret) return ret; } else { usb3_consumed_up = 0; usb3_consumed_down = 0; } *available_up = *available_down = 40000; /* Find the minimum available bandwidth over all links */ tb_for_each_port_on_path(src_port, dst_port, port) { int link_speed, link_width, up_bw, down_bw; if (!tb_port_is_null(port)) continue; if (tb_is_upstream_port(port)) { link_speed = port->sw->link_speed; } else { link_speed = tb_port_get_link_speed(port); if (link_speed < 0) return link_speed; } link_width = port->bonded ? 2 : 1; up_bw = link_speed * link_width * 1000; /* Mb/s */ /* Leave 10% guard band */ up_bw -= up_bw / 10; down_bw = up_bw; tb_port_dbg(port, "link total bandwidth %d Mb/s\n", up_bw); /* * Find all DP tunnels that cross the port and reduce * their consumed bandwidth from the available. */ list_for_each_entry(tunnel, &tcm->tunnel_list, list) { int dp_consumed_up, dp_consumed_down; if (!tb_tunnel_is_dp(tunnel)) continue; if (!tb_tunnel_port_on_path(tunnel, port)) continue; ret = tb_tunnel_consumed_bandwidth(tunnel, &dp_consumed_up, &dp_consumed_down); if (ret) return ret; up_bw -= dp_consumed_up; down_bw -= dp_consumed_down; } /* * If USB3 is tunneled from the host router down to the * branch leading to port we need to take USB3 consumed * bandwidth into account regardless whether it actually * crosses the port. */ up_bw -= usb3_consumed_up; down_bw -= usb3_consumed_down; if (up_bw < *available_up) *available_up = up_bw; if (down_bw < *available_down) *available_down = down_bw; } if (*available_up < 0) *available_up = 0; if (*available_down < 0) *available_down = 0; return 0; } static int tb_release_unused_usb3_bandwidth(struct tb *tb, struct tb_port *src_port, struct tb_port *dst_port) { struct tb_tunnel *tunnel; tunnel = tb_find_first_usb3_tunnel(tb, src_port, dst_port); return tunnel ? tb_tunnel_release_unused_bandwidth(tunnel) : 0; } static void tb_reclaim_usb3_bandwidth(struct tb *tb, struct tb_port *src_port, struct tb_port *dst_port) { int ret, available_up, available_down; struct tb_tunnel *tunnel; tunnel = tb_find_first_usb3_tunnel(tb, src_port, dst_port); if (!tunnel) return; tb_dbg(tb, "reclaiming unused bandwidth for USB3\n"); /* * Calculate available bandwidth for the first hop USB3 tunnel. * That determines the whole USB3 bandwidth for this branch. */ ret = tb_available_bandwidth(tb, tunnel->src_port, tunnel->dst_port, &available_up, &available_down); if (ret) { tb_warn(tb, "failed to calculate available bandwidth\n"); return; } tb_dbg(tb, "available bandwidth for USB3 %d/%d Mb/s\n", available_up, available_down); tb_tunnel_reclaim_available_bandwidth(tunnel, &available_up, &available_down); } static int tb_tunnel_usb3(struct tb *tb, struct tb_switch *sw) { struct tb_switch *parent = tb_switch_parent(sw); int ret, available_up, available_down; struct tb_port *up, *down, *port; struct tb_cm *tcm = tb_priv(tb); struct tb_tunnel *tunnel; if (!tb_acpi_may_tunnel_usb3()) { tb_dbg(tb, "USB3 tunneling disabled, not creating tunnel\n"); return 0; } up = tb_switch_find_port(sw, TB_TYPE_USB3_UP); if (!up) return 0; if (!sw->link_usb4) return 0; /* * Look up available down port. Since we are chaining it should * be found right above this switch. */ port = tb_port_at(tb_route(sw), parent); down = tb_find_usb3_down(parent, port); if (!down) return 0; if (tb_route(parent)) { struct tb_port *parent_up; /* * Check first that the parent switch has its upstream USB3 * port enabled. Otherwise the chain is not complete and * there is no point setting up a new tunnel. */ parent_up = tb_switch_find_port(parent, TB_TYPE_USB3_UP); if (!parent_up || !tb_port_is_enabled(parent_up)) return 0; /* Make all unused bandwidth available for the new tunnel */ ret = tb_release_unused_usb3_bandwidth(tb, down, up); if (ret) return ret; } ret = tb_available_bandwidth(tb, down, up, &available_up, &available_down); if (ret) goto err_reclaim; tb_port_dbg(up, "available bandwidth for new USB3 tunnel %d/%d Mb/s\n", available_up, available_down); tunnel = tb_tunnel_alloc_usb3(tb, up, down, available_up, available_down); if (!tunnel) { ret = -ENOMEM; goto err_reclaim; } if (tb_tunnel_activate(tunnel)) { tb_port_info(up, "USB3 tunnel activation failed, aborting\n"); ret = -EIO; goto err_free; } list_add_tail(&tunnel->list, &tcm->tunnel_list); if (tb_route(parent)) tb_reclaim_usb3_bandwidth(tb, down, up); return 0; err_free: tb_tunnel_free(tunnel); err_reclaim: if (tb_route(parent)) tb_reclaim_usb3_bandwidth(tb, down, up); return ret; } static int tb_create_usb3_tunnels(struct tb_switch *sw) { struct tb_port *port; int ret; if (!tb_acpi_may_tunnel_usb3()) return 0; if (tb_route(sw)) { ret = tb_tunnel_usb3(sw->tb, sw); if (ret) return ret; } tb_switch_for_each_port(sw, port) { if (!tb_port_has_remote(port)) continue; ret = tb_create_usb3_tunnels(port->remote->sw); if (ret) return ret; } return 0; } static void tb_scan_port(struct tb_port *port); /* * tb_scan_switch() - scan for and initialize downstream switches */ static void tb_scan_switch(struct tb_switch *sw) { struct tb_port *port; pm_runtime_get_sync(&sw->dev); tb_switch_for_each_port(sw, port) tb_scan_port(port); pm_runtime_mark_last_busy(&sw->dev); pm_runtime_put_autosuspend(&sw->dev); } /* * tb_scan_port() - check for and initialize switches below port */ static void tb_scan_port(struct tb_port *port) { struct tb_cm *tcm = tb_priv(port->sw->tb); struct tb_port *upstream_port; struct tb_switch *sw; int ret; if (tb_is_upstream_port(port)) return; if (tb_port_is_dpout(port) && tb_dp_port_hpd_is_active(port) == 1 && !tb_dp_port_is_enabled(port)) { tb_port_dbg(port, "DP adapter HPD set, queuing hotplug\n"); tb_queue_hotplug(port->sw->tb, tb_route(port->sw), port->port, false); return; } if (port->config.type != TB_TYPE_PORT) return; if (port->dual_link_port && port->link_nr) return; /* * Downstream switch is reachable through two ports. * Only scan on the primary port (link_nr == 0). */ if (tb_wait_for_port(port, false) <= 0) return; if (port->remote) { tb_port_dbg(port, "port already has a remote\n"); return; } tb_retimer_scan(port, true); sw = tb_switch_alloc(port->sw->tb, &port->sw->dev, tb_downstream_route(port)); if (IS_ERR(sw)) { /* * If there is an error accessing the connected switch * it may be connected to another domain. Also we allow * the other domain to be connected to a max depth switch. */ if (PTR_ERR(sw) == -EIO || PTR_ERR(sw) == -EADDRNOTAVAIL) tb_scan_xdomain(port); return; } if (tb_switch_configure(sw)) { tb_switch_put(sw); return; } /* * If there was previously another domain connected remove it * first. */ if (port->xdomain) { tb_xdomain_remove(port->xdomain); tb_port_unconfigure_xdomain(port); port->xdomain = NULL; } /* * Do not send uevents until we have discovered all existing * tunnels and know which switches were authorized already by * the boot firmware. */ if (!tcm->hotplug_active) dev_set_uevent_suppress(&sw->dev, true); /* * At the moment Thunderbolt 2 and beyond (devices with LC) we * can support runtime PM. */ sw->rpm = sw->generation > 1; if (tb_switch_add(sw)) { tb_switch_put(sw); return; } /* Link the switches using both links if available */ upstream_port = tb_upstream_port(sw); port->remote = upstream_port; upstream_port->remote = port; if (port->dual_link_port && upstream_port->dual_link_port) { port->dual_link_port->remote = upstream_port->dual_link_port; upstream_port->dual_link_port->remote = port->dual_link_port; } /* Enable lane bonding if supported */ tb_switch_lane_bonding_enable(sw); /* Set the link configured */ tb_switch_configure_link(sw); /* * CL0s and CL1 are enabled and supported together. * Silently ignore CLx enabling in case CLx is not supported. */ ret = tb_switch_enable_clx(sw, TB_CL1); if (ret && ret != -EOPNOTSUPP) tb_sw_warn(sw, "failed to enable %s on upstream port\n", tb_switch_clx_name(TB_CL1)); if (tb_switch_is_clx_enabled(sw, TB_CL1)) /* * To support highest CLx state, we set router's TMU to * Normal-Uni mode. */ tb_switch_tmu_configure(sw, TB_SWITCH_TMU_RATE_NORMAL, true); else /* If CLx disabled, configure router's TMU to HiFi-Bidir mode*/ tb_switch_tmu_configure(sw, TB_SWITCH_TMU_RATE_HIFI, false); if (tb_enable_tmu(sw)) tb_sw_warn(sw, "failed to enable TMU\n"); /* Scan upstream retimers */ tb_retimer_scan(upstream_port, true); /* * Create USB 3.x tunnels only when the switch is plugged to the * domain. This is because we scan the domain also during discovery * and want to discover existing USB 3.x tunnels before we create * any new. */ if (tcm->hotplug_active && tb_tunnel_usb3(sw->tb, sw)) tb_sw_warn(sw, "USB3 tunnel creation failed\n"); tb_add_dp_resources(sw); tb_scan_switch(sw); } static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel) { struct tb_port *src_port, *dst_port; struct tb *tb; if (!tunnel) return; tb_tunnel_deactivate(tunnel); list_del(&tunnel->list); tb = tunnel->tb; src_port = tunnel->src_port; dst_port = tunnel->dst_port; switch (tunnel->type) { case TB_TUNNEL_DP: /* * In case of DP tunnel make sure the DP IN resource is * deallocated properly. */ tb_switch_dealloc_dp_resource(src_port->sw, src_port); /* Now we can allow the domain to runtime suspend again */ pm_runtime_mark_last_busy(&dst_port->sw->dev); pm_runtime_put_autosuspend(&dst_port->sw->dev); pm_runtime_mark_last_busy(&src_port->sw->dev); pm_runtime_put_autosuspend(&src_port->sw->dev); fallthrough; case TB_TUNNEL_USB3: tb_reclaim_usb3_bandwidth(tb, src_port, dst_port); break; default: /* * PCIe and DMA tunnels do not consume guaranteed * bandwidth. */ break; } tb_tunnel_free(tunnel); } /* * tb_free_invalid_tunnels() - destroy tunnels of devices that have gone away */ static void tb_free_invalid_tunnels(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); struct tb_tunnel *tunnel; struct tb_tunnel *n; list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) { if (tb_tunnel_is_invalid(tunnel)) tb_deactivate_and_free_tunnel(tunnel); } } /* * tb_free_unplugged_children() - traverse hierarchy and free unplugged switches */ static void tb_free_unplugged_children(struct tb_switch *sw) { struct tb_port *port; tb_switch_for_each_port(sw, port) { if (!tb_port_has_remote(port)) continue; if (port->remote->sw->is_unplugged) { tb_retimer_remove_all(port); tb_remove_dp_resources(port->remote->sw); tb_switch_unconfigure_link(port->remote->sw); tb_switch_lane_bonding_disable(port->remote->sw); tb_switch_remove(port->remote->sw); port->remote = NULL; if (port->dual_link_port) port->dual_link_port->remote = NULL; } else { tb_free_unplugged_children(port->remote->sw); } } } static struct tb_port *tb_find_pcie_down(struct tb_switch *sw, const struct tb_port *port) { struct tb_port *down = NULL; /* * To keep plugging devices consistently in the same PCIe * hierarchy, do mapping here for switch downstream PCIe ports. */ if (tb_switch_is_usb4(sw)) { down = usb4_switch_map_pcie_down(sw, port); } else if (!tb_route(sw)) { int phy_port = tb_phy_port_from_link(port->port); int index; /* * Hard-coded Thunderbolt port to PCIe down port mapping * per controller. */ if (tb_switch_is_cactus_ridge(sw) || tb_switch_is_alpine_ridge(sw)) index = !phy_port ? 6 : 7; else if (tb_switch_is_falcon_ridge(sw)) index = !phy_port ? 6 : 8; else if (tb_switch_is_titan_ridge(sw)) index = !phy_port ? 8 : 9; else goto out; /* Validate the hard-coding */ if (WARN_ON(index > sw->config.max_port_number)) goto out; down = &sw->ports[index]; } if (down) { if (WARN_ON(!tb_port_is_pcie_down(down))) goto out; if (tb_pci_port_is_enabled(down)) goto out; return down; } out: return tb_find_unused_port(sw, TB_TYPE_PCIE_DOWN); } static struct tb_port *tb_find_dp_out(struct tb *tb, struct tb_port *in) { struct tb_port *host_port, *port; struct tb_cm *tcm = tb_priv(tb); host_port = tb_route(in->sw) ? tb_port_at(tb_route(in->sw), tb->root_switch) : NULL; list_for_each_entry(port, &tcm->dp_resources, list) { if (!tb_port_is_dpout(port)) continue; if (tb_port_is_enabled(port)) { tb_port_dbg(port, "in use\n"); continue; } tb_port_dbg(port, "DP OUT available\n"); /* * Keep the DP tunnel under the topology starting from * the same host router downstream port. */ if (host_port && tb_route(port->sw)) { struct tb_port *p; p = tb_port_at(tb_route(port->sw), tb->root_switch); if (p != host_port) continue; } return port; } return NULL; } static void tb_tunnel_dp(struct tb *tb) { int available_up, available_down, ret, link_nr; struct tb_cm *tcm = tb_priv(tb); struct tb_port *port, *in, *out; struct tb_tunnel *tunnel; if (!tb_acpi_may_tunnel_dp()) { tb_dbg(tb, "DP tunneling disabled, not creating tunnel\n"); return; } /* * Find pair of inactive DP IN and DP OUT adapters and then * establish a DP tunnel between them. */ tb_dbg(tb, "looking for DP IN <-> DP OUT pairs:\n"); in = NULL; out = NULL; list_for_each_entry(port, &tcm->dp_resources, list) { if (!tb_port_is_dpin(port)) continue; if (tb_port_is_enabled(port)) { tb_port_dbg(port, "in use\n"); continue; } tb_port_dbg(port, "DP IN available\n"); out = tb_find_dp_out(tb, port); if (out) { in = port; break; } } if (!in) { tb_dbg(tb, "no suitable DP IN adapter available, not tunneling\n"); return; } if (!out) { tb_dbg(tb, "no suitable DP OUT adapter available, not tunneling\n"); return; } /* * This is only applicable to links that are not bonded (so * when Thunderbolt 1 hardware is involved somewhere in the * topology). For these try to share the DP bandwidth between * the two lanes. */ link_nr = 1; list_for_each_entry(tunnel, &tcm->tunnel_list, list) { if (tb_tunnel_is_dp(tunnel)) { link_nr = 0; break; } } /* * DP stream needs the domain to be active so runtime resume * both ends of the tunnel. * * This should bring the routers in the middle active as well * and keeps the domain from runtime suspending while the DP * tunnel is active. */ pm_runtime_get_sync(&in->sw->dev); pm_runtime_get_sync(&out->sw->dev); if (tb_switch_alloc_dp_resource(in->sw, in)) { tb_port_dbg(in, "no resource available for DP IN, not tunneling\n"); goto err_rpm_put; } /* Make all unused USB3 bandwidth available for the new DP tunnel */ ret = tb_release_unused_usb3_bandwidth(tb, in, out); if (ret) { tb_warn(tb, "failed to release unused bandwidth\n"); goto err_dealloc_dp; } ret = tb_available_bandwidth(tb, in, out, &available_up, &available_down); if (ret) goto err_reclaim; tb_dbg(tb, "available bandwidth for new DP tunnel %u/%u Mb/s\n", available_up, available_down); tunnel = tb_tunnel_alloc_dp(tb, in, out, link_nr, available_up, available_down); if (!tunnel) { tb_port_dbg(out, "could not allocate DP tunnel\n"); goto err_reclaim; } if (tb_tunnel_activate(tunnel)) { tb_port_info(out, "DP tunnel activation failed, aborting\n"); goto err_free; } list_add_tail(&tunnel->list, &tcm->tunnel_list); tb_reclaim_usb3_bandwidth(tb, in, out); /* * In case of DP tunnel exists, change host router's 1st children * TMU mode to HiFi for CL0s to work. */ tb_switch_enable_tmu_1st_child(tb->root_switch, TB_SWITCH_TMU_RATE_HIFI); return; err_free: tb_tunnel_free(tunnel); err_reclaim: tb_reclaim_usb3_bandwidth(tb, in, out); err_dealloc_dp: tb_switch_dealloc_dp_resource(in->sw, in); err_rpm_put: pm_runtime_mark_last_busy(&out->sw->dev); pm_runtime_put_autosuspend(&out->sw->dev); pm_runtime_mark_last_busy(&in->sw->dev); pm_runtime_put_autosuspend(&in->sw->dev); } static void tb_dp_resource_unavailable(struct tb *tb, struct tb_port *port) { struct tb_port *in, *out; struct tb_tunnel *tunnel; if (tb_port_is_dpin(port)) { tb_port_dbg(port, "DP IN resource unavailable\n"); in = port; out = NULL; } else { tb_port_dbg(port, "DP OUT resource unavailable\n"); in = NULL; out = port; } tunnel = tb_find_tunnel(tb, TB_TUNNEL_DP, in, out); tb_deactivate_and_free_tunnel(tunnel); list_del_init(&port->list); /* * See if there is another DP OUT port that can be used for * to create another tunnel. */ tb_tunnel_dp(tb); } static void tb_dp_resource_available(struct tb *tb, struct tb_port *port) { struct tb_cm *tcm = tb_priv(tb); struct tb_port *p; if (tb_port_is_enabled(port)) return; list_for_each_entry(p, &tcm->dp_resources, list) { if (p == port) return; } tb_port_dbg(port, "DP %s resource available\n", tb_port_is_dpin(port) ? "IN" : "OUT"); list_add_tail(&port->list, &tcm->dp_resources); /* Look for suitable DP IN <-> DP OUT pairs now */ tb_tunnel_dp(tb); } static void tb_disconnect_and_release_dp(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); struct tb_tunnel *tunnel, *n; /* * Tear down all DP tunnels and release their resources. They * will be re-established after resume based on plug events. */ list_for_each_entry_safe_reverse(tunnel, n, &tcm->tunnel_list, list) { if (tb_tunnel_is_dp(tunnel)) tb_deactivate_and_free_tunnel(tunnel); } while (!list_empty(&tcm->dp_resources)) { struct tb_port *port; port = list_first_entry(&tcm->dp_resources, struct tb_port, list); list_del_init(&port->list); } } static int tb_disconnect_pci(struct tb *tb, struct tb_switch *sw) { struct tb_tunnel *tunnel; struct tb_port *up; up = tb_switch_find_port(sw, TB_TYPE_PCIE_UP); if (WARN_ON(!up)) return -ENODEV; tunnel = tb_find_tunnel(tb, TB_TUNNEL_PCI, NULL, up); if (WARN_ON(!tunnel)) return -ENODEV; tb_switch_xhci_disconnect(sw); tb_tunnel_deactivate(tunnel); list_del(&tunnel->list); tb_tunnel_free(tunnel); return 0; } static int tb_tunnel_pci(struct tb *tb, struct tb_switch *sw) { struct tb_port *up, *down, *port; struct tb_cm *tcm = tb_priv(tb); struct tb_switch *parent_sw; struct tb_tunnel *tunnel; up = tb_switch_find_port(sw, TB_TYPE_PCIE_UP); if (!up) return 0; /* * Look up available down port. Since we are chaining it should * be found right above this switch. */ parent_sw = tb_to_switch(sw->dev.parent); port = tb_port_at(tb_route(sw), parent_sw); down = tb_find_pcie_down(parent_sw, port); if (!down) return 0; tunnel = tb_tunnel_alloc_pci(tb, up, down); if (!tunnel) return -ENOMEM; if (tb_tunnel_activate(tunnel)) { tb_port_info(up, "PCIe tunnel activation failed, aborting\n"); tb_tunnel_free(tunnel); return -EIO; } /* * PCIe L1 is needed to enable CL0s for Titan Ridge so enable it * here. */ if (tb_switch_pcie_l1_enable(sw)) tb_sw_warn(sw, "failed to enable PCIe L1 for Titan Ridge\n"); if (tb_switch_xhci_connect(sw)) tb_sw_warn(sw, "failed to connect xHCI\n"); list_add_tail(&tunnel->list, &tcm->tunnel_list); return 0; } static int tb_approve_xdomain_paths(struct tb *tb, struct tb_xdomain *xd, int transmit_path, int transmit_ring, int receive_path, int receive_ring) { struct tb_cm *tcm = tb_priv(tb); struct tb_port *nhi_port, *dst_port; struct tb_tunnel *tunnel; struct tb_switch *sw; sw = tb_to_switch(xd->dev.parent); dst_port = tb_port_at(xd->route, sw); nhi_port = tb_switch_find_port(tb->root_switch, TB_TYPE_NHI); mutex_lock(&tb->lock); tunnel = tb_tunnel_alloc_dma(tb, nhi_port, dst_port, transmit_path, transmit_ring, receive_path, receive_ring); if (!tunnel) { mutex_unlock(&tb->lock); return -ENOMEM; } if (tb_tunnel_activate(tunnel)) { tb_port_info(nhi_port, "DMA tunnel activation failed, aborting\n"); tb_tunnel_free(tunnel); mutex_unlock(&tb->lock); return -EIO; } list_add_tail(&tunnel->list, &tcm->tunnel_list); mutex_unlock(&tb->lock); return 0; } static void __tb_disconnect_xdomain_paths(struct tb *tb, struct tb_xdomain *xd, int transmit_path, int transmit_ring, int receive_path, int receive_ring) { struct tb_cm *tcm = tb_priv(tb); struct tb_port *nhi_port, *dst_port; struct tb_tunnel *tunnel, *n; struct tb_switch *sw; sw = tb_to_switch(xd->dev.parent); dst_port = tb_port_at(xd->route, sw); nhi_port = tb_switch_find_port(tb->root_switch, TB_TYPE_NHI); list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) { if (!tb_tunnel_is_dma(tunnel)) continue; if (tunnel->src_port != nhi_port || tunnel->dst_port != dst_port) continue; if (tb_tunnel_match_dma(tunnel, transmit_path, transmit_ring, receive_path, receive_ring)) tb_deactivate_and_free_tunnel(tunnel); } } static int tb_disconnect_xdomain_paths(struct tb *tb, struct tb_xdomain *xd, int transmit_path, int transmit_ring, int receive_path, int receive_ring) { if (!xd->is_unplugged) { mutex_lock(&tb->lock); __tb_disconnect_xdomain_paths(tb, xd, transmit_path, transmit_ring, receive_path, receive_ring); mutex_unlock(&tb->lock); } return 0; } /* hotplug handling */ /* * tb_handle_hotplug() - handle hotplug event * * Executes on tb->wq. */ static void tb_handle_hotplug(struct work_struct *work) { struct tb_hotplug_event *ev = container_of(work, typeof(*ev), work); struct tb *tb = ev->tb; struct tb_cm *tcm = tb_priv(tb); struct tb_switch *sw; struct tb_port *port; /* Bring the domain back from sleep if it was suspended */ pm_runtime_get_sync(&tb->dev); mutex_lock(&tb->lock); if (!tcm->hotplug_active) goto out; /* during init, suspend or shutdown */ sw = tb_switch_find_by_route(tb, ev->route); if (!sw) { tb_warn(tb, "hotplug event from non existent switch %llx:%x (unplug: %d)\n", ev->route, ev->port, ev->unplug); goto out; } if (ev->port > sw->config.max_port_number) { tb_warn(tb, "hotplug event from non existent port %llx:%x (unplug: %d)\n", ev->route, ev->port, ev->unplug); goto put_sw; } port = &sw->ports[ev->port]; if (tb_is_upstream_port(port)) { tb_dbg(tb, "hotplug event for upstream port %llx:%x (unplug: %d)\n", ev->route, ev->port, ev->unplug); goto put_sw; } pm_runtime_get_sync(&sw->dev); if (ev->unplug) { tb_retimer_remove_all(port); if (tb_port_has_remote(port)) { tb_port_dbg(port, "switch unplugged\n"); tb_sw_set_unplugged(port->remote->sw); tb_free_invalid_tunnels(tb); tb_remove_dp_resources(port->remote->sw); tb_switch_tmu_disable(port->remote->sw); tb_switch_unconfigure_link(port->remote->sw); tb_switch_lane_bonding_disable(port->remote->sw); tb_switch_remove(port->remote->sw); port->remote = NULL; if (port->dual_link_port) port->dual_link_port->remote = NULL; /* Maybe we can create another DP tunnel */ tb_tunnel_dp(tb); } else if (port->xdomain) { struct tb_xdomain *xd = tb_xdomain_get(port->xdomain); tb_port_dbg(port, "xdomain unplugged\n"); /* * Service drivers are unbound during * tb_xdomain_remove() so setting XDomain as * unplugged here prevents deadlock if they call * tb_xdomain_disable_paths(). We will tear down * all the tunnels below. */ xd->is_unplugged = true; tb_xdomain_remove(xd); port->xdomain = NULL; __tb_disconnect_xdomain_paths(tb, xd, -1, -1, -1, -1); tb_xdomain_put(xd); tb_port_unconfigure_xdomain(port); } else if (tb_port_is_dpout(port) || tb_port_is_dpin(port)) { tb_dp_resource_unavailable(tb, port); } else if (!port->port) { tb_sw_dbg(sw, "xHCI disconnect request\n"); tb_switch_xhci_disconnect(sw); } else { tb_port_dbg(port, "got unplug event for disconnected port, ignoring\n"); } } else if (port->remote) { tb_port_dbg(port, "got plug event for connected port, ignoring\n"); } else if (!port->port && sw->authorized) { tb_sw_dbg(sw, "xHCI connect request\n"); tb_switch_xhci_connect(sw); } else { if (tb_port_is_null(port)) { tb_port_dbg(port, "hotplug: scanning\n"); tb_scan_port(port); if (!port->remote) tb_port_dbg(port, "hotplug: no switch found\n"); } else if (tb_port_is_dpout(port) || tb_port_is_dpin(port)) { tb_dp_resource_available(tb, port); } } pm_runtime_mark_last_busy(&sw->dev); pm_runtime_put_autosuspend(&sw->dev); put_sw: tb_switch_put(sw); out: mutex_unlock(&tb->lock); pm_runtime_mark_last_busy(&tb->dev); pm_runtime_put_autosuspend(&tb->dev); kfree(ev); } /* * tb_schedule_hotplug_handler() - callback function for the control channel * * Delegates to tb_handle_hotplug. */ static void tb_handle_event(struct tb *tb, enum tb_cfg_pkg_type type, const void *buf, size_t size) { const struct cfg_event_pkg *pkg = buf; u64 route; if (type != TB_CFG_PKG_EVENT) { tb_warn(tb, "unexpected event %#x, ignoring\n", type); return; } route = tb_cfg_get_route(&pkg->header); if (tb_cfg_ack_plug(tb->ctl, route, pkg->port, pkg->unplug)) { tb_warn(tb, "could not ack plug event on %llx:%x\n", route, pkg->port); } tb_queue_hotplug(tb, route, pkg->port, pkg->unplug); } static void tb_stop(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); struct tb_tunnel *tunnel; struct tb_tunnel *n; cancel_delayed_work(&tcm->remove_work); /* tunnels are only present after everything has been initialized */ list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) { /* * DMA tunnels require the driver to be functional so we * tear them down. Other protocol tunnels can be left * intact. */ if (tb_tunnel_is_dma(tunnel)) tb_tunnel_deactivate(tunnel); tb_tunnel_free(tunnel); } tb_switch_remove(tb->root_switch); tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */ } static int tb_scan_finalize_switch(struct device *dev, void *data) { if (tb_is_switch(dev)) { struct tb_switch *sw = tb_to_switch(dev); /* * If we found that the switch was already setup by the * boot firmware, mark it as authorized now before we * send uevent to userspace. */ if (sw->boot) sw->authorized = 1; dev_set_uevent_suppress(dev, false); kobject_uevent(&dev->kobj, KOBJ_ADD); device_for_each_child(dev, NULL, tb_scan_finalize_switch); } return 0; } static int tb_start(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); int ret; tb->root_switch = tb_switch_alloc(tb, &tb->dev, 0); if (IS_ERR(tb->root_switch)) return PTR_ERR(tb->root_switch); /* * ICM firmware upgrade needs running firmware and in native * mode that is not available so disable firmware upgrade of the * root switch. * * However, USB4 routers support NVM firmware upgrade if they * implement the necessary router operations. */ tb->root_switch->no_nvm_upgrade = !tb_switch_is_usb4(tb->root_switch); /* All USB4 routers support runtime PM */ tb->root_switch->rpm = tb_switch_is_usb4(tb->root_switch); ret = tb_switch_configure(tb->root_switch); if (ret) { tb_switch_put(tb->root_switch); return ret; } /* Announce the switch to the world */ ret = tb_switch_add(tb->root_switch); if (ret) { tb_switch_put(tb->root_switch); return ret; } /* * To support highest CLx state, we set host router's TMU to * Normal mode. */ tb_switch_tmu_configure(tb->root_switch, TB_SWITCH_TMU_RATE_NORMAL, false); /* Enable TMU if it is off */ tb_switch_tmu_enable(tb->root_switch); /* Full scan to discover devices added before the driver was loaded. */ tb_scan_switch(tb->root_switch); /* Find out tunnels created by the boot firmware */ tb_discover_tunnels(tb); /* Add DP resources from the DP tunnels created by the boot firmware */ tb_discover_dp_resources(tb); /* * If the boot firmware did not create USB 3.x tunnels create them * now for the whole topology. */ tb_create_usb3_tunnels(tb->root_switch); /* Add DP IN resources for the root switch */ tb_add_dp_resources(tb->root_switch); /* Make the discovered switches available to the userspace */ device_for_each_child(&tb->root_switch->dev, NULL, tb_scan_finalize_switch); /* Allow tb_handle_hotplug to progress events */ tcm->hotplug_active = true; return 0; } static int tb_suspend_noirq(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); tb_dbg(tb, "suspending...\n"); tb_disconnect_and_release_dp(tb); tb_switch_suspend(tb->root_switch, false); tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */ tb_dbg(tb, "suspend finished\n"); return 0; } static void tb_restore_children(struct tb_switch *sw) { struct tb_port *port; int ret; /* No need to restore if the router is already unplugged */ if (sw->is_unplugged) return; /* * CL0s and CL1 are enabled and supported together. * Silently ignore CLx re-enabling in case CLx is not supported. */ ret = tb_switch_enable_clx(sw, TB_CL1); if (ret && ret != -EOPNOTSUPP) tb_sw_warn(sw, "failed to re-enable %s on upstream port\n", tb_switch_clx_name(TB_CL1)); if (tb_switch_is_clx_enabled(sw, TB_CL1)) /* * To support highest CLx state, we set router's TMU to * Normal-Uni mode. */ tb_switch_tmu_configure(sw, TB_SWITCH_TMU_RATE_NORMAL, true); else /* If CLx disabled, configure router's TMU to HiFi-Bidir mode*/ tb_switch_tmu_configure(sw, TB_SWITCH_TMU_RATE_HIFI, false); if (tb_enable_tmu(sw)) tb_sw_warn(sw, "failed to restore TMU configuration\n"); tb_switch_for_each_port(sw, port) { if (!tb_port_has_remote(port) && !port->xdomain) continue; if (port->remote) { tb_switch_lane_bonding_enable(port->remote->sw); tb_switch_configure_link(port->remote->sw); tb_restore_children(port->remote->sw); } else if (port->xdomain) { tb_port_configure_xdomain(port, port->xdomain); } } } static int tb_resume_noirq(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); struct tb_tunnel *tunnel, *n; unsigned int usb3_delay = 0; LIST_HEAD(tunnels); tb_dbg(tb, "resuming...\n"); /* remove any pci devices the firmware might have setup */ tb_switch_reset(tb->root_switch); tb_switch_resume(tb->root_switch); tb_free_invalid_tunnels(tb); tb_free_unplugged_children(tb->root_switch); tb_restore_children(tb->root_switch); /* * If we get here from suspend to disk the boot firmware or the * restore kernel might have created tunnels of its own. Since * we cannot be sure they are usable for us we find and tear * them down. */ tb_switch_discover_tunnels(tb->root_switch, &tunnels, false); list_for_each_entry_safe_reverse(tunnel, n, &tunnels, list) { if (tb_tunnel_is_usb3(tunnel)) usb3_delay = 500; tb_tunnel_deactivate(tunnel); tb_tunnel_free(tunnel); } /* Re-create our tunnels now */ list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) { /* USB3 requires delay before it can be re-activated */ if (tb_tunnel_is_usb3(tunnel)) { msleep(usb3_delay); /* Only need to do it once */ usb3_delay = 0; } tb_tunnel_restart(tunnel); } if (!list_empty(&tcm->tunnel_list)) { /* * the pcie links need some time to get going. * 100ms works for me... */ tb_dbg(tb, "tunnels restarted, sleeping for 100ms\n"); msleep(100); } /* Allow tb_handle_hotplug to progress events */ tcm->hotplug_active = true; tb_dbg(tb, "resume finished\n"); return 0; } static int tb_free_unplugged_xdomains(struct tb_switch *sw) { struct tb_port *port; int ret = 0; tb_switch_for_each_port(sw, port) { if (tb_is_upstream_port(port)) continue; if (port->xdomain && port->xdomain->is_unplugged) { tb_retimer_remove_all(port); tb_xdomain_remove(port->xdomain); tb_port_unconfigure_xdomain(port); port->xdomain = NULL; ret++; } else if (port->remote) { ret += tb_free_unplugged_xdomains(port->remote->sw); } } return ret; } static int tb_freeze_noirq(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); tcm->hotplug_active = false; return 0; } static int tb_thaw_noirq(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); tcm->hotplug_active = true; return 0; } static void tb_complete(struct tb *tb) { /* * Release any unplugged XDomains and if there is a case where * another domain is swapped in place of unplugged XDomain we * need to run another rescan. */ mutex_lock(&tb->lock); if (tb_free_unplugged_xdomains(tb->root_switch)) tb_scan_switch(tb->root_switch); mutex_unlock(&tb->lock); } static int tb_runtime_suspend(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); mutex_lock(&tb->lock); tb_switch_suspend(tb->root_switch, true); tcm->hotplug_active = false; mutex_unlock(&tb->lock); return 0; } static void tb_remove_work(struct work_struct *work) { struct tb_cm *tcm = container_of(work, struct tb_cm, remove_work.work); struct tb *tb = tcm_to_tb(tcm); mutex_lock(&tb->lock); if (tb->root_switch) { tb_free_unplugged_children(tb->root_switch); tb_free_unplugged_xdomains(tb->root_switch); } mutex_unlock(&tb->lock); } static int tb_runtime_resume(struct tb *tb) { struct tb_cm *tcm = tb_priv(tb); struct tb_tunnel *tunnel, *n; mutex_lock(&tb->lock); tb_switch_resume(tb->root_switch); tb_free_invalid_tunnels(tb); tb_restore_children(tb->root_switch); list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) tb_tunnel_restart(tunnel); tcm->hotplug_active = true; mutex_unlock(&tb->lock); /* * Schedule cleanup of any unplugged devices. Run this in a * separate thread to avoid possible deadlock if the device * removal runtime resumes the unplugged device. */ queue_delayed_work(tb->wq, &tcm->remove_work, msecs_to_jiffies(50)); return 0; } static const struct tb_cm_ops tb_cm_ops = { .start = tb_start, .stop = tb_stop, .suspend_noirq = tb_suspend_noirq, .resume_noirq = tb_resume_noirq, .freeze_noirq = tb_freeze_noirq, .thaw_noirq = tb_thaw_noirq, .complete = tb_complete, .runtime_suspend = tb_runtime_suspend, .runtime_resume = tb_runtime_resume, .handle_event = tb_handle_event, .disapprove_switch = tb_disconnect_pci, .approve_switch = tb_tunnel_pci, .approve_xdomain_paths = tb_approve_xdomain_paths, .disconnect_xdomain_paths = tb_disconnect_xdomain_paths, }; /* * During suspend the Thunderbolt controller is reset and all PCIe * tunnels are lost. The NHI driver will try to reestablish all tunnels * during resume. This adds device links between the tunneled PCIe * downstream ports and the NHI so that the device core will make sure * NHI is resumed first before the rest. */ static void tb_apple_add_links(struct tb_nhi *nhi) { struct pci_dev *upstream, *pdev; if (!x86_apple_machine) return; switch (nhi->pdev->device) { case PCI_DEVICE_ID_INTEL_LIGHT_RIDGE: case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C: case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI: case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI: break; default: return; } upstream = pci_upstream_bridge(nhi->pdev); while (upstream) { if (!pci_is_pcie(upstream)) return; if (pci_pcie_type(upstream) == PCI_EXP_TYPE_UPSTREAM) break; upstream = pci_upstream_bridge(upstream); } if (!upstream) return; /* * For each hotplug downstream port, create add device link * back to NHI so that PCIe tunnels can be re-established after * sleep. */ for_each_pci_bridge(pdev, upstream->subordinate) { const struct device_link *link; if (!pci_is_pcie(pdev)) continue; if (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM || !pdev->is_hotplug_bridge) continue; link = device_link_add(&pdev->dev, &nhi->pdev->dev, DL_FLAG_AUTOREMOVE_SUPPLIER | DL_FLAG_PM_RUNTIME); if (link) { dev_dbg(&nhi->pdev->dev, "created link from %s\n", dev_name(&pdev->dev)); } else { dev_warn(&nhi->pdev->dev, "device link creation from %s failed\n", dev_name(&pdev->dev)); } } } struct tb *tb_probe(struct tb_nhi *nhi) { struct tb_cm *tcm; struct tb *tb; tb = tb_domain_alloc(nhi, TB_TIMEOUT, sizeof(*tcm)); if (!tb) return NULL; if (tb_acpi_may_tunnel_pcie()) tb->security_level = TB_SECURITY_USER; else tb->security_level = TB_SECURITY_NOPCIE; tb->cm_ops = &tb_cm_ops; tcm = tb_priv(tb); INIT_LIST_HEAD(&tcm->tunnel_list); INIT_LIST_HEAD(&tcm->dp_resources); INIT_DELAYED_WORK(&tcm->remove_work, tb_remove_work); tb_dbg(tb, "using software connection manager\n"); tb_apple_add_links(nhi); tb_acpi_add_links(nhi); return tb; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1