| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Jiri Slaby | 5977 | 66.45% | 84 | 54.19% |
| Alan Cox | 1520 | 16.90% | 25 | 16.13% |
| Linus Torvalds (pre-git) | 669 | 7.44% | 2 | 1.29% |
| Christoph Hellwig | 331 | 3.68% | 1 | 0.65% |
| Al Viro | 134 | 1.49% | 4 | 2.58% |
| Alexey Khoroshilov | 95 | 1.06% | 2 | 1.29% |
| Johan Hovold | 90 | 1.00% | 3 | 1.94% |
| Peter Hurley | 49 | 0.54% | 5 | 3.23% |
| Adrian Bunk | 34 | 0.38% | 1 | 0.65% |
| Dave Jones | 13 | 0.14% | 1 | 0.65% |
| Matwey V. Kornilov | 12 | 0.13% | 1 | 0.65% |
| Linus Torvalds | 11 | 0.12% | 2 | 1.29% |
| Arnaldo Carvalho de Melo | 10 | 0.11% | 1 | 0.65% |
| Dan Carpenter | 6 | 0.07% | 1 | 0.65% |
| Kirill Smelkov | 5 | 0.06% | 2 | 1.29% |
| Andrew Morton | 4 | 0.04% | 2 | 1.29% |
| Huang Shijie | 4 | 0.04% | 1 | 0.65% |
| Rusty Russell | 4 | 0.04% | 1 | 0.65% |
| Ilpo Järvinen | 4 | 0.04% | 2 | 1.29% |
| Manuel Zerpies | 3 | 0.03% | 1 | 0.65% |
| David Howells | 3 | 0.03% | 1 | 0.65% |
| Vernon A. Fort | 3 | 0.03% | 1 | 0.65% |
| Tejun Heo | 3 | 0.03% | 1 | 0.65% |
| Maximilian Attems | 2 | 0.02% | 1 | 0.65% |
| Greg Kroah-Hartman | 2 | 0.02% | 2 | 1.29% |
| Denys Vlasenko | 1 | 0.01% | 1 | 0.65% |
| Randy Dunlap | 1 | 0.01% | 1 | 0.65% |
| Aya Mahfouz | 1 | 0.01% | 1 | 0.65% |
| Arvind Yadav | 1 | 0.01% | 1 | 0.65% |
| Bill Pemberton | 1 | 0.01% | 1 | 0.65% |
| Jason Yan | 1 | 0.01% | 1 | 0.65% |
| H Hartley Sweeten | 1 | 0.01% | 1 | 0.65% |
| Total | 8995 | 155 |
// SPDX-License-Identifier: GPL-2.0+ /* * mxser.c -- MOXA Smartio/Industio family multiport serial driver. * * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com). * Copyright (C) 2006-2008 Jiri Slaby <jirislaby@gmail.com> * * This code is loosely based on the 1.8 moxa driver which is based on * Linux serial driver, written by Linus Torvalds, Theodore T'so and * others. * * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox * <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on * www.moxa.com. * - Fixed x86_64 cleanness */ #include <linux/module.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial.h> #include <linux/serial_reg.h> #include <linux/major.h> #include <linux/string.h> #include <linux/fcntl.h> #include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/mm.h> #include <linux/delay.h> #include <linux/pci.h> #include <linux/bitops.h> #include <linux/slab.h> #include <linux/ratelimit.h> #include <asm/io.h> #include <asm/irq.h> #include <linux/uaccess.h> /* * Semi-public control interfaces */ /* * MOXA ioctls */ #define MOXA 0x400 #define MOXA_SET_OP_MODE (MOXA + 66) #define MOXA_GET_OP_MODE (MOXA + 67) #define RS232_MODE 0 #define RS485_2WIRE_MODE 1 #define RS422_MODE 2 #define RS485_4WIRE_MODE 3 #define OP_MODE_MASK 3 /* --------------------------------------------------- */ /* * Follow just what Moxa Must chip defines. * * When LCR register (offset 0x03) is written the following value, the Must chip * will enter enhanced mode. And a write to EFR (offset 0x02) bit 6,7 will * change bank. */ #define MOXA_MUST_ENTER_ENHANCED 0xBF /* when enhanced mode is enabled, access to general bank register */ #define MOXA_MUST_GDL_REGISTER 0x07 #define MOXA_MUST_GDL_MASK 0x7F #define MOXA_MUST_GDL_HAS_BAD_DATA 0x80 #define MOXA_MUST_LSR_RERR 0x80 /* error in receive FIFO */ /* enhanced register bank select and enhanced mode setting register */ /* This works only when LCR register equals to 0xBF */ #define MOXA_MUST_EFR_REGISTER 0x02 #define MOXA_MUST_EFR_EFRB_ENABLE 0x10 /* enhanced mode enable */ /* enhanced register bank set 0, 1, 2 */ #define MOXA_MUST_EFR_BANK0 0x00 #define MOXA_MUST_EFR_BANK1 0x40 #define MOXA_MUST_EFR_BANK2 0x80 #define MOXA_MUST_EFR_BANK3 0xC0 #define MOXA_MUST_EFR_BANK_MASK 0xC0 /* set XON1 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XON1_REGISTER 0x04 /* set XON2 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XON2_REGISTER 0x05 /* set XOFF1 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XOFF1_REGISTER 0x06 /* set XOFF2 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XOFF2_REGISTER 0x07 #define MOXA_MUST_RBRTL_REGISTER 0x04 #define MOXA_MUST_RBRTH_REGISTER 0x05 #define MOXA_MUST_RBRTI_REGISTER 0x06 #define MOXA_MUST_THRTL_REGISTER 0x07 #define MOXA_MUST_ENUM_REGISTER 0x04 #define MOXA_MUST_HWID_REGISTER 0x05 #define MOXA_MUST_ECR_REGISTER 0x06 #define MOXA_MUST_CSR_REGISTER 0x07 #define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20 /* good data mode enable */ #define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10 /* only good data put into RxFIFO */ #define MOXA_MUST_IER_ECTSI 0x80 /* enable CTS interrupt */ #define MOXA_MUST_IER_ERTSI 0x40 /* enable RTS interrupt */ #define MOXA_MUST_IER_XINT 0x20 /* enable Xon/Xoff interrupt */ #define MOXA_MUST_IER_EGDAI 0x10 /* enable GDA interrupt */ #define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI) /* GDA interrupt pending */ #define MOXA_MUST_IIR_GDA 0x1C #define MOXA_MUST_IIR_RDA 0x04 #define MOXA_MUST_IIR_RTO 0x0C #define MOXA_MUST_IIR_LSR 0x06 /* received Xon/Xoff or specical interrupt pending */ #define MOXA_MUST_IIR_XSC 0x10 /* RTS/CTS change state interrupt pending */ #define MOXA_MUST_IIR_RTSCTS 0x20 #define MOXA_MUST_IIR_MASK 0x3E #define MOXA_MUST_MCR_XON_FLAG 0x40 #define MOXA_MUST_MCR_XON_ANY 0x80 #define MOXA_MUST_MCR_TX_XON 0x08 #define MOXA_MUST_EFR_SF_MASK 0x0F /* software flow control on chip mask value */ #define MOXA_MUST_EFR_SF_TX1 0x08 /* send Xon1/Xoff1 */ #define MOXA_MUST_EFR_SF_TX2 0x04 /* send Xon2/Xoff2 */ #define MOXA_MUST_EFR_SF_TX12 0x0C /* send Xon1,Xon2/Xoff1,Xoff2 */ #define MOXA_MUST_EFR_SF_TX_NO 0x00 /* don't send Xon/Xoff */ #define MOXA_MUST_EFR_SF_TX_MASK 0x0C /* Tx software flow control mask */ #define MOXA_MUST_EFR_SF_RX_NO 0x00 /* don't receive Xon/Xoff */ #define MOXA_MUST_EFR_SF_RX1 0x02 /* receive Xon1/Xoff1 */ #define MOXA_MUST_EFR_SF_RX2 0x01 /* receive Xon2/Xoff2 */ #define MOXA_MUST_EFR_SF_RX12 0x03 /* receive Xon1,Xon2/Xoff1,Xoff2 */ #define MOXA_MUST_EFR_SF_RX_MASK 0x03 /* Rx software flow control mask */ #define MXSERMAJOR 174 #define MXSER_BOARDS 4 /* Max. boards */ #define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ #define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) #define MXSER_ISR_PASS_LIMIT 100 #define WAKEUP_CHARS 256 #define MXSER_BAUD_BASE 921600 #define MXSER_CUSTOM_DIVISOR (MXSER_BAUD_BASE * 16) #define PCI_DEVICE_ID_MOXA_RC7000 0x0001 #define PCI_DEVICE_ID_MOXA_CP102 0x1020 #define PCI_DEVICE_ID_MOXA_CP102UL 0x1021 #define PCI_DEVICE_ID_MOXA_CP102U 0x1022 #define PCI_DEVICE_ID_MOXA_CP102UF 0x1023 #define PCI_DEVICE_ID_MOXA_C104 0x1040 #define PCI_DEVICE_ID_MOXA_CP104U 0x1041 #define PCI_DEVICE_ID_MOXA_CP104JU 0x1042 #define PCI_DEVICE_ID_MOXA_CP104EL 0x1043 #define PCI_DEVICE_ID_MOXA_POS104UL 0x1044 #define PCI_DEVICE_ID_MOXA_CB108 0x1080 #define PCI_DEVICE_ID_MOXA_CP112UL 0x1120 #define PCI_DEVICE_ID_MOXA_CT114 0x1140 #define PCI_DEVICE_ID_MOXA_CP114 0x1141 #define PCI_DEVICE_ID_MOXA_CB114 0x1142 #define PCI_DEVICE_ID_MOXA_CP114UL 0x1143 #define PCI_DEVICE_ID_MOXA_CP118U 0x1180 #define PCI_DEVICE_ID_MOXA_CP118EL 0x1181 #define PCI_DEVICE_ID_MOXA_CP132 0x1320 #define PCI_DEVICE_ID_MOXA_CP132U 0x1321 #define PCI_DEVICE_ID_MOXA_CP134U 0x1340 #define PCI_DEVICE_ID_MOXA_CB134I 0x1341 #define PCI_DEVICE_ID_MOXA_CP138U 0x1380 #define PCI_DEVICE_ID_MOXA_C168 0x1680 #define PCI_DEVICE_ID_MOXA_CP168U 0x1681 #define PCI_DEVICE_ID_MOXA_CP168EL 0x1682 #define MXSER_NPORTS(ddata) ((ddata) & 0xffU) #define MXSER_HIGHBAUD 0x0100 enum mxser_must_hwid { MOXA_OTHER_UART = 0x00, MOXA_MUST_MU150_HWID = 0x01, MOXA_MUST_MU860_HWID = 0x02, }; static const struct { u8 type; u8 fifo_size; u8 rx_high_water; u8 rx_low_water; speed_t max_baud; } Gpci_uart_info[] = { { MOXA_OTHER_UART, 16, 14, 1, 921600 }, { MOXA_MUST_MU150_HWID, 64, 48, 16, 230400 }, { MOXA_MUST_MU860_HWID, 128, 96, 32, 921600 } }; #define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info) /* driver_data correspond to the lines in the structure above see also ISA probe function before you change something */ static const struct pci_device_id mxser_pcibrds[] = { { PCI_DEVICE_DATA(MOXA, C168, 8) }, { PCI_DEVICE_DATA(MOXA, C104, 4) }, { PCI_DEVICE_DATA(MOXA, CP132, 2) }, { PCI_DEVICE_DATA(MOXA, CP114, 4) }, { PCI_DEVICE_DATA(MOXA, CT114, 4) }, { PCI_DEVICE_DATA(MOXA, CP102, 2 | MXSER_HIGHBAUD) }, { PCI_DEVICE_DATA(MOXA, CP104U, 4) }, { PCI_DEVICE_DATA(MOXA, CP168U, 8) }, { PCI_DEVICE_DATA(MOXA, CP132U, 2) }, { PCI_DEVICE_DATA(MOXA, CP134U, 4) }, { PCI_DEVICE_DATA(MOXA, CP104JU, 4) }, { PCI_DEVICE_DATA(MOXA, RC7000, 8) }, /* RC7000 */ { PCI_DEVICE_DATA(MOXA, CP118U, 8) }, { PCI_DEVICE_DATA(MOXA, CP102UL, 2) }, { PCI_DEVICE_DATA(MOXA, CP102U, 2) }, { PCI_DEVICE_DATA(MOXA, CP118EL, 8) }, { PCI_DEVICE_DATA(MOXA, CP168EL, 8) }, { PCI_DEVICE_DATA(MOXA, CP104EL, 4) }, { PCI_DEVICE_DATA(MOXA, CB108, 8) }, { PCI_DEVICE_DATA(MOXA, CB114, 4) }, { PCI_DEVICE_DATA(MOXA, CB134I, 4) }, { PCI_DEVICE_DATA(MOXA, CP138U, 8) }, { PCI_DEVICE_DATA(MOXA, POS104UL, 4) }, { PCI_DEVICE_DATA(MOXA, CP114UL, 4) }, { PCI_DEVICE_DATA(MOXA, CP102UF, 2) }, { PCI_DEVICE_DATA(MOXA, CP112UL, 2) }, { } }; MODULE_DEVICE_TABLE(pci, mxser_pcibrds); static int ttymajor = MXSERMAJOR; /* Variables for insmod */ MODULE_AUTHOR("Casper Yang"); MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); module_param(ttymajor, int, 0); MODULE_LICENSE("GPL"); struct mxser_board; struct mxser_port { struct tty_port port; struct mxser_board *board; unsigned long ioaddr; unsigned long opmode_ioaddr; u8 rx_high_water; u8 rx_low_water; int type; /* UART type */ unsigned char x_char; /* xon/xoff character */ u8 IER; /* Interrupt Enable Register */ u8 MCR; /* Modem control register */ u8 FCR; /* FIFO control register */ struct async_icount icount; /* kernel counters for 4 input interrupts */ unsigned int timeout; u8 read_status_mask; u8 ignore_status_mask; u8 xmit_fifo_size; spinlock_t slock; }; struct mxser_board { unsigned int idx; unsigned short nports; int irq; unsigned long vector; enum mxser_must_hwid must_hwid; speed_t max_baud; struct mxser_port ports[]; }; static DECLARE_BITMAP(mxser_boards, MXSER_BOARDS); static struct tty_driver *mxvar_sdriver; static u8 __mxser_must_set_EFR(unsigned long baseio, u8 clear, u8 set, bool restore_LCR) { u8 oldlcr, efr; oldlcr = inb(baseio + UART_LCR); outb(MOXA_MUST_ENTER_ENHANCED, baseio + UART_LCR); efr = inb(baseio + MOXA_MUST_EFR_REGISTER); efr &= ~clear; efr |= set; outb(efr, baseio + MOXA_MUST_EFR_REGISTER); if (restore_LCR) outb(oldlcr, baseio + UART_LCR); return oldlcr; } static u8 mxser_must_select_bank(unsigned long baseio, u8 bank) { return __mxser_must_set_EFR(baseio, MOXA_MUST_EFR_BANK_MASK, bank, false); } static void mxser_set_must_xon1_value(unsigned long baseio, u8 value) { u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK0); outb(value, baseio + MOXA_MUST_XON1_REGISTER); outb(oldlcr, baseio + UART_LCR); } static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value) { u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK0); outb(value, baseio + MOXA_MUST_XOFF1_REGISTER); outb(oldlcr, baseio + UART_LCR); } static void mxser_set_must_fifo_value(struct mxser_port *info) { u8 oldlcr = mxser_must_select_bank(info->ioaddr, MOXA_MUST_EFR_BANK1); outb(info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER); outb(info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTI_REGISTER); outb(info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER); outb(oldlcr, info->ioaddr + UART_LCR); } static void mxser_set_must_enum_value(unsigned long baseio, u8 value) { u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK2); outb(value, baseio + MOXA_MUST_ENUM_REGISTER); outb(oldlcr, baseio + UART_LCR); } static u8 mxser_get_must_hardware_id(unsigned long baseio) { u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK2); u8 id = inb(baseio + MOXA_MUST_HWID_REGISTER); outb(oldlcr, baseio + UART_LCR); return id; } static void mxser_must_set_EFR(unsigned long baseio, u8 clear, u8 set) { __mxser_must_set_EFR(baseio, clear, set, true); } static void mxser_must_set_enhance_mode(unsigned long baseio, bool enable) { mxser_must_set_EFR(baseio, enable ? 0 : MOXA_MUST_EFR_EFRB_ENABLE, enable ? MOXA_MUST_EFR_EFRB_ENABLE : 0); } static void mxser_must_no_sw_flow_control(unsigned long baseio) { mxser_must_set_EFR(baseio, MOXA_MUST_EFR_SF_MASK, 0); } static void mxser_must_set_tx_sw_flow_control(unsigned long baseio, bool enable) { mxser_must_set_EFR(baseio, MOXA_MUST_EFR_SF_TX_MASK, enable ? MOXA_MUST_EFR_SF_TX1 : 0); } static void mxser_must_set_rx_sw_flow_control(unsigned long baseio, bool enable) { mxser_must_set_EFR(baseio, MOXA_MUST_EFR_SF_RX_MASK, enable ? MOXA_MUST_EFR_SF_RX1 : 0); } static enum mxser_must_hwid mxser_must_get_hwid(unsigned long io) { u8 oldmcr, hwid; int i; outb(0, io + UART_LCR); mxser_must_set_enhance_mode(io, false); oldmcr = inb(io + UART_MCR); outb(0, io + UART_MCR); mxser_set_must_xon1_value(io, 0x11); if (inb(io + UART_MCR) != 0) { outb(oldmcr, io + UART_MCR); return MOXA_OTHER_UART; } hwid = mxser_get_must_hardware_id(io); for (i = 1; i < UART_INFO_NUM; i++) /* 0 = OTHER_UART */ if (hwid == Gpci_uart_info[i].type) return hwid; return MOXA_OTHER_UART; } static bool mxser_16550A_or_MUST(struct mxser_port *info) { return info->type == PORT_16550A || info->board->must_hwid; } static void mxser_process_txrx_fifo(struct mxser_port *info) { unsigned int i; if (info->type == PORT_16450 || info->type == PORT_8250) { info->rx_high_water = 1; info->rx_low_water = 1; info->xmit_fifo_size = 1; return; } for (i = 0; i < UART_INFO_NUM; i++) if (info->board->must_hwid == Gpci_uart_info[i].type) { info->rx_low_water = Gpci_uart_info[i].rx_low_water; info->rx_high_water = Gpci_uart_info[i].rx_high_water; info->xmit_fifo_size = Gpci_uart_info[i].fifo_size; break; } } static void __mxser_start_tx(struct mxser_port *info) { outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; outb(info->IER, info->ioaddr + UART_IER); } static void mxser_start_tx(struct mxser_port *info) { unsigned long flags; spin_lock_irqsave(&info->slock, flags); __mxser_start_tx(info); spin_unlock_irqrestore(&info->slock, flags); } static void __mxser_stop_tx(struct mxser_port *info) { info->IER &= ~UART_IER_THRI; outb(info->IER, info->ioaddr + UART_IER); } static int mxser_carrier_raised(struct tty_port *port) { struct mxser_port *mp = container_of(port, struct mxser_port, port); return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; } static void mxser_dtr_rts(struct tty_port *port, int on) { struct mxser_port *mp = container_of(port, struct mxser_port, port); unsigned long flags; u8 mcr; spin_lock_irqsave(&mp->slock, flags); mcr = inb(mp->ioaddr + UART_MCR); if (on) mcr |= UART_MCR_DTR | UART_MCR_RTS; else mcr &= ~(UART_MCR_DTR | UART_MCR_RTS); outb(mcr, mp->ioaddr + UART_MCR); spin_unlock_irqrestore(&mp->slock, flags); } static int mxser_set_baud(struct tty_struct *tty, speed_t newspd) { struct mxser_port *info = tty->driver_data; unsigned int quot = 0, baud; unsigned char cval; u64 timeout; if (newspd > info->board->max_baud) return -1; if (newspd == 134) { quot = 2 * MXSER_BAUD_BASE / 269; tty_encode_baud_rate(tty, 134, 134); } else if (newspd) { quot = MXSER_BAUD_BASE / newspd; if (quot == 0) quot = 1; baud = MXSER_BAUD_BASE / quot; tty_encode_baud_rate(tty, baud, baud); } else { quot = 0; } /* * worst case (128 * 1000 * 10 * 18432) needs 35 bits, so divide in the * u64 domain */ timeout = (u64)info->xmit_fifo_size * HZ * 10 * quot; do_div(timeout, MXSER_BAUD_BASE); info->timeout = timeout + HZ / 50; /* Add .02 seconds of slop */ if (quot) { info->MCR |= UART_MCR_DTR; outb(info->MCR, info->ioaddr + UART_MCR); } else { info->MCR &= ~UART_MCR_DTR; outb(info->MCR, info->ioaddr + UART_MCR); return 0; } cval = inb(info->ioaddr + UART_LCR); outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */ outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */ outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ if (C_BAUD(tty) == BOTHER) { quot = MXSER_BAUD_BASE % newspd; quot *= 8; if (quot % newspd > newspd / 2) { quot /= newspd; quot++; } else quot /= newspd; mxser_set_must_enum_value(info->ioaddr, quot); } else { mxser_set_must_enum_value(info->ioaddr, 0); } return 0; } static void mxser_handle_cts(struct tty_struct *tty, struct mxser_port *info, u8 msr) { bool cts = msr & UART_MSR_CTS; if (tty->hw_stopped) { if (cts) { tty->hw_stopped = 0; if (!mxser_16550A_or_MUST(info)) __mxser_start_tx(info); tty_wakeup(tty); } return; } else if (cts) return; tty->hw_stopped = 1; if (!mxser_16550A_or_MUST(info)) __mxser_stop_tx(info); } /* * This routine is called to set the UART divisor registers to match * the specified baud rate for a serial port. */ static void mxser_change_speed(struct tty_struct *tty, const struct ktermios *old_termios) { struct mxser_port *info = tty->driver_data; unsigned cflag, cval; cflag = tty->termios.c_cflag; if (mxser_set_baud(tty, tty_get_baud_rate(tty))) { /* Use previous rate on a failure */ if (old_termios) { speed_t baud = tty_termios_baud_rate(old_termios); tty_encode_baud_rate(tty, baud, baud); } } /* byte size and parity */ cval = UART_LCR_WLEN(tty_get_char_size(tty->termios.c_cflag)); if (cflag & CSTOPB) cval |= UART_LCR_STOP; if (cflag & PARENB) cval |= UART_LCR_PARITY; if (!(cflag & PARODD)) cval |= UART_LCR_EPAR; if (cflag & CMSPAR) cval |= UART_LCR_SPAR; info->FCR = 0; if (info->board->must_hwid) { info->FCR |= UART_FCR_ENABLE_FIFO | MOXA_MUST_FCR_GDA_MODE_ENABLE; mxser_set_must_fifo_value(info); } else if (info->type != PORT_8250 && info->type != PORT_16450) { info->FCR |= UART_FCR_ENABLE_FIFO; switch (info->rx_high_water) { case 1: info->FCR |= UART_FCR_TRIGGER_1; break; case 4: info->FCR |= UART_FCR_TRIGGER_4; break; case 8: info->FCR |= UART_FCR_TRIGGER_8; break; default: info->FCR |= UART_FCR_TRIGGER_14; break; } } /* CTS flow control flag and modem status interrupts */ info->IER &= ~UART_IER_MSI; info->MCR &= ~UART_MCR_AFE; tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); if (cflag & CRTSCTS) { info->IER |= UART_IER_MSI; if (mxser_16550A_or_MUST(info)) { info->MCR |= UART_MCR_AFE; } else { mxser_handle_cts(tty, info, inb(info->ioaddr + UART_MSR)); } } outb(info->MCR, info->ioaddr + UART_MCR); tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); if (~cflag & CLOCAL) info->IER |= UART_IER_MSI; outb(info->IER, info->ioaddr + UART_IER); /* * Set up parity check flag */ info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; if (I_INPCK(tty)) info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; if (I_BRKINT(tty) || I_PARMRK(tty)) info->read_status_mask |= UART_LSR_BI; info->ignore_status_mask = 0; if (I_IGNBRK(tty)) { info->ignore_status_mask |= UART_LSR_BI; info->read_status_mask |= UART_LSR_BI; /* * If we're ignore parity and break indicators, ignore * overruns too. (For real raw support). */ if (I_IGNPAR(tty)) { info->ignore_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE; info->read_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE; } } if (info->board->must_hwid) { mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty)); mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty)); mxser_must_set_rx_sw_flow_control(info->ioaddr, I_IXON(tty)); mxser_must_set_tx_sw_flow_control(info->ioaddr, I_IXOFF(tty)); } outb(info->FCR, info->ioaddr + UART_FCR); outb(cval, info->ioaddr + UART_LCR); } static u8 mxser_check_modem_status(struct tty_struct *tty, struct mxser_port *port) { u8 msr = inb(port->ioaddr + UART_MSR); if (!(msr & UART_MSR_ANY_DELTA)) return msr; /* update input line counters */ if (msr & UART_MSR_TERI) port->icount.rng++; if (msr & UART_MSR_DDSR) port->icount.dsr++; if (msr & UART_MSR_DDCD) port->icount.dcd++; if (msr & UART_MSR_DCTS) port->icount.cts++; wake_up_interruptible(&port->port.delta_msr_wait); if (tty_port_check_carrier(&port->port) && (msr & UART_MSR_DDCD)) { if (msr & UART_MSR_DCD) wake_up_interruptible(&port->port.open_wait); } if (tty_port_cts_enabled(&port->port)) mxser_handle_cts(tty, port, msr); return msr; } static void mxser_disable_and_clear_FIFO(struct mxser_port *info) { u8 fcr = UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT; if (info->board->must_hwid) fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; outb(fcr, info->ioaddr + UART_FCR); } static int mxser_activate(struct tty_port *port, struct tty_struct *tty) { struct mxser_port *info = container_of(port, struct mxser_port, port); unsigned long flags; int ret; ret = tty_port_alloc_xmit_buf(port); if (ret < 0) return ret; spin_lock_irqsave(&info->slock, flags); if (!info->type) { set_bit(TTY_IO_ERROR, &tty->flags); spin_unlock_irqrestore(&info->slock, flags); ret = 0; goto err_free_xmit; } /* * Clear the FIFO buffers and disable them * (they will be reenabled in mxser_change_speed()) */ mxser_disable_and_clear_FIFO(info); /* * At this point there's no way the LSR could still be 0xFF; * if it is, then bail out, because there's likely no UART * here. */ if (inb(info->ioaddr + UART_LSR) == 0xff) { spin_unlock_irqrestore(&info->slock, flags); if (capable(CAP_SYS_ADMIN)) { set_bit(TTY_IO_ERROR, &tty->flags); return 0; } ret = -ENODEV; goto err_free_xmit; } /* * Clear the interrupt registers. */ (void) inb(info->ioaddr + UART_LSR); (void) inb(info->ioaddr + UART_RX); (void) inb(info->ioaddr + UART_IIR); (void) inb(info->ioaddr + UART_MSR); /* * Now, initialize the UART */ outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */ info->MCR = UART_MCR_DTR | UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR); /* * Finally, enable interrupts */ info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; if (info->board->must_hwid) info->IER |= MOXA_MUST_IER_EGDAI; outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */ /* * And clear the interrupt registers again for luck. */ (void) inb(info->ioaddr + UART_LSR); (void) inb(info->ioaddr + UART_RX); (void) inb(info->ioaddr + UART_IIR); (void) inb(info->ioaddr + UART_MSR); clear_bit(TTY_IO_ERROR, &tty->flags); kfifo_reset(&port->xmit_fifo); /* * and set the speed of the serial port */ mxser_change_speed(tty, NULL); spin_unlock_irqrestore(&info->slock, flags); return 0; err_free_xmit: tty_port_free_xmit_buf(port); return ret; } /* * To stop accepting input, we disable the receive line status interrupts, and * tell the interrupt driver to stop checking the data ready bit in the line * status register. */ static void mxser_stop_rx(struct mxser_port *info) { info->IER &= ~UART_IER_RLSI; if (info->board->must_hwid) info->IER &= ~MOXA_MUST_RECV_ISR; outb(info->IER, info->ioaddr + UART_IER); } /* * This routine will shutdown a serial port */ static void mxser_shutdown_port(struct tty_port *port) { struct mxser_port *info = container_of(port, struct mxser_port, port); unsigned long flags; spin_lock_irqsave(&info->slock, flags); mxser_stop_rx(info); /* * clear delta_msr_wait queue to avoid mem leaks: we may free the irq * here so the queue might never be waken up */ wake_up_interruptible(&info->port.delta_msr_wait); info->IER = 0; outb(0x00, info->ioaddr + UART_IER); /* clear Rx/Tx FIFO's */ mxser_disable_and_clear_FIFO(info); /* read data port to reset things */ (void) inb(info->ioaddr + UART_RX); if (info->board->must_hwid) mxser_must_no_sw_flow_control(info->ioaddr); spin_unlock_irqrestore(&info->slock, flags); /* make sure ISR is not running while we free the buffer */ synchronize_irq(info->board->irq); tty_port_free_xmit_buf(port); } /* * This routine is called whenever a serial port is opened. It * enables interrupts for a serial port, linking in its async structure into * the IRQ chain. It also performs the serial-specific * initialization for the tty structure. */ static int mxser_open(struct tty_struct *tty, struct file *filp) { struct tty_port *tport = tty->port; struct mxser_port *port = container_of(tport, struct mxser_port, port); tty->driver_data = port; return tty_port_open(tport, tty, filp); } static void mxser_flush_buffer(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; unsigned long flags; spin_lock_irqsave(&info->slock, flags); kfifo_reset(&info->port.xmit_fifo); outb(info->FCR | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, info->ioaddr + UART_FCR); spin_unlock_irqrestore(&info->slock, flags); tty_wakeup(tty); } static void mxser_close(struct tty_struct *tty, struct file *filp) { tty_port_close(tty->port, tty, filp); } static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) { struct mxser_port *info = tty->driver_data; unsigned long flags; int written; bool is_empty; spin_lock_irqsave(&info->slock, flags); written = kfifo_in(&info->port.xmit_fifo, buf, count); is_empty = kfifo_is_empty(&info->port.xmit_fifo); spin_unlock_irqrestore(&info->slock, flags); if (!is_empty && !tty->flow.stopped) if (!tty->hw_stopped || mxser_16550A_or_MUST(info)) mxser_start_tx(info); return written; } static int mxser_put_char(struct tty_struct *tty, unsigned char ch) { struct mxser_port *info = tty->driver_data; unsigned long flags; int ret; spin_lock_irqsave(&info->slock, flags); ret = kfifo_put(&info->port.xmit_fifo, ch); spin_unlock_irqrestore(&info->slock, flags); return ret; } static void mxser_flush_chars(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; if (kfifo_is_empty(&info->port.xmit_fifo) || tty->flow.stopped || (tty->hw_stopped && !mxser_16550A_or_MUST(info))) return; mxser_start_tx(info); } static unsigned int mxser_write_room(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; return kfifo_avail(&info->port.xmit_fifo); } static unsigned int mxser_chars_in_buffer(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; return kfifo_len(&info->port.xmit_fifo); } /* * ------------------------------------------------------------ * friends of mxser_ioctl() * ------------------------------------------------------------ */ static int mxser_get_serial_info(struct tty_struct *tty, struct serial_struct *ss) { struct mxser_port *info = tty->driver_data; struct tty_port *port = &info->port; unsigned int closing_wait, close_delay; mutex_lock(&port->mutex); close_delay = jiffies_to_msecs(info->port.close_delay) / 10; closing_wait = info->port.closing_wait; if (closing_wait != ASYNC_CLOSING_WAIT_NONE) closing_wait = jiffies_to_msecs(closing_wait) / 10; ss->type = info->type; ss->line = tty->index; ss->port = info->ioaddr; ss->irq = info->board->irq; ss->flags = info->port.flags; ss->baud_base = MXSER_BAUD_BASE; ss->close_delay = close_delay; ss->closing_wait = closing_wait; ss->custom_divisor = MXSER_CUSTOM_DIVISOR, mutex_unlock(&port->mutex); return 0; } static int mxser_set_serial_info(struct tty_struct *tty, struct serial_struct *ss) { struct mxser_port *info = tty->driver_data; struct tty_port *port = &info->port; speed_t baud; unsigned long sl_flags; unsigned int old_speed, close_delay, closing_wait; int retval = 0; if (tty_io_error(tty)) return -EIO; mutex_lock(&port->mutex); if (ss->irq != info->board->irq || ss->port != info->ioaddr) { mutex_unlock(&port->mutex); return -EINVAL; } old_speed = port->flags & ASYNC_SPD_MASK; close_delay = msecs_to_jiffies(ss->close_delay * 10); closing_wait = ss->closing_wait; if (closing_wait != ASYNC_CLOSING_WAIT_NONE) closing_wait = msecs_to_jiffies(closing_wait * 10); if (!capable(CAP_SYS_ADMIN)) { if ((ss->baud_base != MXSER_BAUD_BASE) || (close_delay != port->close_delay) || (closing_wait != port->closing_wait) || ((ss->flags & ~ASYNC_USR_MASK) != (port->flags & ~ASYNC_USR_MASK))) { mutex_unlock(&port->mutex); return -EPERM; } port->flags = (port->flags & ~ASYNC_USR_MASK) | (ss->flags & ASYNC_USR_MASK); } else { /* * OK, past this point, all the error checking has been done. * At this point, we start making changes..... */ port->flags = ((port->flags & ~ASYNC_FLAGS) | (ss->flags & ASYNC_FLAGS)); port->close_delay = close_delay; port->closing_wait = closing_wait; if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && (ss->baud_base != MXSER_BAUD_BASE || ss->custom_divisor != MXSER_CUSTOM_DIVISOR)) { if (ss->custom_divisor == 0) { mutex_unlock(&port->mutex); return -EINVAL; } baud = ss->baud_base / ss->custom_divisor; tty_encode_baud_rate(tty, baud, baud); } info->type = ss->type; mxser_process_txrx_fifo(info); } if (tty_port_initialized(port)) { if (old_speed != (port->flags & ASYNC_SPD_MASK)) { spin_lock_irqsave(&info->slock, sl_flags); mxser_change_speed(tty, NULL); spin_unlock_irqrestore(&info->slock, sl_flags); } } else { retval = mxser_activate(port, tty); if (retval == 0) tty_port_set_initialized(port, 1); } mutex_unlock(&port->mutex); return retval; } /* * mxser_get_lsr_info - get line status register info * * Purpose: Let user call ioctl() to get info when the UART physically * is emptied. On bus types like RS485, the transmitter must * release the bus after transmitting. This must be done when * the transmit shift register is empty, not be done when the * transmit holding register is empty. This functionality * allows an RS485 driver to be written in user space. */ static int mxser_get_lsr_info(struct mxser_port *info, unsigned int __user *value) { unsigned char status; unsigned int result; unsigned long flags; spin_lock_irqsave(&info->slock, flags); status = inb(info->ioaddr + UART_LSR); spin_unlock_irqrestore(&info->slock, flags); result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); return put_user(result, value); } static int mxser_tiocmget(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; unsigned char control; unsigned long flags; u8 msr; if (tty_io_error(tty)) return -EIO; spin_lock_irqsave(&info->slock, flags); control = info->MCR; msr = mxser_check_modem_status(tty, info); spin_unlock_irqrestore(&info->slock, flags); return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | ((msr & UART_MSR_DCD) ? TIOCM_CAR : 0) | ((msr & UART_MSR_RI) ? TIOCM_RNG : 0) | ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0) | ((msr & UART_MSR_CTS) ? TIOCM_CTS : 0); } static int mxser_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct mxser_port *info = tty->driver_data; unsigned long flags; if (tty_io_error(tty)) return -EIO; spin_lock_irqsave(&info->slock, flags); if (set & TIOCM_RTS) info->MCR |= UART_MCR_RTS; if (set & TIOCM_DTR) info->MCR |= UART_MCR_DTR; if (clear & TIOCM_RTS) info->MCR &= ~UART_MCR_RTS; if (clear & TIOCM_DTR) info->MCR &= ~UART_MCR_DTR; outb(info->MCR, info->ioaddr + UART_MCR); spin_unlock_irqrestore(&info->slock, flags); return 0; } static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, struct async_icount *cprev) { struct async_icount cnow; unsigned long flags; int ret; spin_lock_irqsave(&info->slock, flags); cnow = info->icount; /* atomic copy */ spin_unlock_irqrestore(&info->slock, flags); ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); *cprev = cnow; return ret; } /* We should likely switch to TIOCGRS485/TIOCSRS485. */ static int mxser_ioctl_op_mode(struct mxser_port *port, int index, bool set, int __user *u_opmode) { int opmode, p = index % 4; int shiftbit = p * 2; u8 val; if (port->board->must_hwid != MOXA_MUST_MU860_HWID) return -EFAULT; if (set) { if (get_user(opmode, u_opmode)) return -EFAULT; if (opmode & ~OP_MODE_MASK) return -EINVAL; spin_lock_irq(&port->slock); val = inb(port->opmode_ioaddr); val &= ~(OP_MODE_MASK << shiftbit); val |= (opmode << shiftbit); outb(val, port->opmode_ioaddr); spin_unlock_irq(&port->slock); return 0; } spin_lock_irq(&port->slock); opmode = inb(port->opmode_ioaddr) >> shiftbit; spin_unlock_irq(&port->slock); return put_user(opmode & OP_MODE_MASK, u_opmode); } static int mxser_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct mxser_port *info = tty->driver_data; struct async_icount cnow; unsigned long flags; void __user *argp = (void __user *)arg; if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) return mxser_ioctl_op_mode(info, tty->index, cmd == MOXA_SET_OP_MODE, argp); if (cmd != TIOCMIWAIT && tty_io_error(tty)) return -EIO; switch (cmd) { case TIOCSERGETLSR: /* Get line status register */ return mxser_get_lsr_info(info, argp); /* * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change * - mask passed in arg for lines of interest * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) * Caller should use TIOCGICOUNT to see which one it was */ case TIOCMIWAIT: spin_lock_irqsave(&info->slock, flags); cnow = info->icount; /* note the counters on entry */ spin_unlock_irqrestore(&info->slock, flags); return wait_event_interruptible(info->port.delta_msr_wait, mxser_cflags_changed(info, arg, &cnow)); default: return -ENOIOCTLCMD; } return 0; } /* * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) * Return: write counters to the user passed counter struct * NB: both 1->0 and 0->1 transitions are counted except for * RI where only 0->1 is counted. */ static int mxser_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount) { struct mxser_port *info = tty->driver_data; struct async_icount cnow; unsigned long flags; spin_lock_irqsave(&info->slock, flags); cnow = info->icount; spin_unlock_irqrestore(&info->slock, flags); icount->frame = cnow.frame; icount->brk = cnow.brk; icount->overrun = cnow.overrun; icount->buf_overrun = cnow.buf_overrun; icount->parity = cnow.parity; icount->rx = cnow.rx; icount->tx = cnow.tx; icount->cts = cnow.cts; icount->dsr = cnow.dsr; icount->rng = cnow.rng; icount->dcd = cnow.dcd; return 0; } /* * This routine is called by the upper-layer tty layer to signal that * incoming characters should be throttled. */ static void mxser_throttle(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; if (I_IXOFF(tty)) { if (info->board->must_hwid) { info->IER &= ~MOXA_MUST_RECV_ISR; outb(info->IER, info->ioaddr + UART_IER); } else { info->x_char = STOP_CHAR(tty); outb(0, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; outb(info->IER, info->ioaddr + UART_IER); } } if (C_CRTSCTS(tty)) { info->MCR &= ~UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR); } } static void mxser_unthrottle(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; /* startrx */ if (I_IXOFF(tty)) { if (info->x_char) info->x_char = 0; else { if (info->board->must_hwid) { info->IER |= MOXA_MUST_RECV_ISR; outb(info->IER, info->ioaddr + UART_IER); } else { info->x_char = START_CHAR(tty); outb(0, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; outb(info->IER, info->ioaddr + UART_IER); } } } if (C_CRTSCTS(tty)) { info->MCR |= UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR); } } /* * mxser_stop() and mxser_start() * * This routines are called before setting or resetting tty->flow.stopped. * They enable or disable transmitter interrupts, as necessary. */ static void mxser_stop(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; unsigned long flags; spin_lock_irqsave(&info->slock, flags); if (info->IER & UART_IER_THRI) __mxser_stop_tx(info); spin_unlock_irqrestore(&info->slock, flags); } static void mxser_start(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; unsigned long flags; spin_lock_irqsave(&info->slock, flags); if (!kfifo_is_empty(&info->port.xmit_fifo)) __mxser_start_tx(info); spin_unlock_irqrestore(&info->slock, flags); } static void mxser_set_termios(struct tty_struct *tty, const struct ktermios *old_termios) { struct mxser_port *info = tty->driver_data; unsigned long flags; spin_lock_irqsave(&info->slock, flags); mxser_change_speed(tty, old_termios); spin_unlock_irqrestore(&info->slock, flags); if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { tty->hw_stopped = 0; mxser_start(tty); } /* Handle sw stopped */ if ((old_termios->c_iflag & IXON) && !I_IXON(tty)) { tty->flow.stopped = 0; if (info->board->must_hwid) { spin_lock_irqsave(&info->slock, flags); mxser_must_set_rx_sw_flow_control(info->ioaddr, false); spin_unlock_irqrestore(&info->slock, flags); } mxser_start(tty); } } static bool mxser_tx_empty(struct mxser_port *info) { unsigned long flags; u8 lsr; spin_lock_irqsave(&info->slock, flags); lsr = inb(info->ioaddr + UART_LSR); spin_unlock_irqrestore(&info->slock, flags); return !(lsr & UART_LSR_TEMT); } /* * mxser_wait_until_sent() --- wait until the transmitter is empty */ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) { struct mxser_port *info = tty->driver_data; unsigned long expire, char_time; if (info->type == PORT_UNKNOWN) return; if (info->xmit_fifo_size == 0) return; /* Just in case.... */ /* * Set the check interval to be 1/5 of the estimated time to * send a single character, and make it at least 1. The check * interval should also be less than the timeout. * * Note: we have to use pretty tight timings here to satisfy * the NIST-PCTS. */ char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; char_time = char_time / 5; if (char_time == 0) char_time = 1; if (timeout && timeout < char_time) char_time = timeout; char_time = jiffies_to_msecs(char_time); /* * If the transmitter hasn't cleared in twice the approximate * amount of time to send the entire FIFO, it probably won't * ever clear. This assumes the UART isn't doing flow * control, which is currently the case. Hence, if it ever * takes longer than info->timeout, this is probably due to a * UART bug of some kind. So, we clamp the timeout parameter at * 2*info->timeout. */ if (!timeout || timeout > 2 * info->timeout) timeout = 2 * info->timeout; expire = jiffies + timeout; while (mxser_tx_empty(info)) { msleep_interruptible(char_time); if (signal_pending(current)) break; if (time_after(jiffies, expire)) break; } } /* * This routine is called by tty_hangup() when a hangup is signaled. */ static void mxser_hangup(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; mxser_flush_buffer(tty); tty_port_hangup(&info->port); } /* * mxser_rs_break() --- routine which turns the break handling on or off */ static int mxser_rs_break(struct tty_struct *tty, int break_state) { struct mxser_port *info = tty->driver_data; unsigned long flags; u8 lcr; spin_lock_irqsave(&info->slock, flags); lcr = inb(info->ioaddr + UART_LCR); if (break_state == -1) lcr |= UART_LCR_SBC; else lcr &= ~UART_LCR_SBC; outb(lcr, info->ioaddr + UART_LCR); spin_unlock_irqrestore(&info->slock, flags); return 0; } static bool mxser_receive_chars_new(struct mxser_port *port, u8 status) { enum mxser_must_hwid hwid = port->board->must_hwid; u8 gdl; if (hwid == MOXA_OTHER_UART) return false; if (status & (UART_LSR_BRK_ERROR_BITS | MOXA_MUST_LSR_RERR)) return false; gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); if (hwid == MOXA_MUST_MU150_HWID) gdl &= MOXA_MUST_GDL_MASK; while (gdl--) { u8 ch = inb(port->ioaddr + UART_RX); if (!tty_insert_flip_char(&port->port, ch, 0)) port->icount.buf_overrun++; } return true; } static u8 mxser_receive_chars_old(struct tty_struct *tty, struct mxser_port *port, u8 status) { enum mxser_must_hwid hwid = port->board->must_hwid; int ignored = 0; int max = 256; u8 ch; do { if (max-- < 0) break; ch = inb(port->ioaddr + UART_RX); if (hwid && (status & UART_LSR_OE)) outb(port->FCR | UART_FCR_CLEAR_RCVR, port->ioaddr + UART_FCR); status &= port->read_status_mask; if (status & port->ignore_status_mask) { if (++ignored > 100) break; } else { char flag = 0; if (status & UART_LSR_BRK_ERROR_BITS) { if (status & UART_LSR_BI) { flag = TTY_BREAK; port->icount.brk++; if (port->port.flags & ASYNC_SAK) do_SAK(tty); } else if (status & UART_LSR_PE) { flag = TTY_PARITY; port->icount.parity++; } else if (status & UART_LSR_FE) { flag = TTY_FRAME; port->icount.frame++; } else if (status & UART_LSR_OE) { flag = TTY_OVERRUN; port->icount.overrun++; } } if (!tty_insert_flip_char(&port->port, ch, flag)) { port->icount.buf_overrun++; break; } } if (hwid) break; status = inb(port->ioaddr + UART_LSR); } while (status & UART_LSR_DR); return status; } static u8 mxser_receive_chars(struct tty_struct *tty, struct mxser_port *port, u8 status) { if (!mxser_receive_chars_new(port, status)) status = mxser_receive_chars_old(tty, port, status); tty_flip_buffer_push(&port->port); return status; } static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port) { int count; if (port->x_char) { outb(port->x_char, port->ioaddr + UART_TX); port->x_char = 0; port->icount.tx++; return; } if (kfifo_is_empty(&port->port.xmit_fifo) || tty->flow.stopped || (tty->hw_stopped && !mxser_16550A_or_MUST(port))) { __mxser_stop_tx(port); return; } count = port->xmit_fifo_size; do { unsigned char c; if (!kfifo_get(&port->port.xmit_fifo, &c)) break; outb(c, port->ioaddr + UART_TX); port->icount.tx++; } while (--count > 0); if (kfifo_len(&port->port.xmit_fifo) < WAKEUP_CHARS) tty_wakeup(tty); if (kfifo_is_empty(&port->port.xmit_fifo)) __mxser_stop_tx(port); } static bool mxser_port_isr(struct mxser_port *port) { struct tty_struct *tty; u8 iir, status; bool error = false; iir = inb(port->ioaddr + UART_IIR); if (iir & UART_IIR_NO_INT) return true; iir &= MOXA_MUST_IIR_MASK; tty = tty_port_tty_get(&port->port); if (!tty) { status = inb(port->ioaddr + UART_LSR); outb(port->FCR | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, port->ioaddr + UART_FCR); inb(port->ioaddr + UART_MSR); error = true; goto put_tty; } status = inb(port->ioaddr + UART_LSR); if (port->board->must_hwid) { if (iir == MOXA_MUST_IIR_GDA || iir == MOXA_MUST_IIR_RDA || iir == MOXA_MUST_IIR_RTO || iir == MOXA_MUST_IIR_LSR) status = mxser_receive_chars(tty, port, status); } else { status &= port->read_status_mask; if (status & UART_LSR_DR) status = mxser_receive_chars(tty, port, status); } mxser_check_modem_status(tty, port); if (port->board->must_hwid) { if (iir == 0x02 && (status & UART_LSR_THRE)) mxser_transmit_chars(tty, port); } else { if (status & UART_LSR_THRE) mxser_transmit_chars(tty, port); } put_tty: tty_kref_put(tty); return error; } /* * This is the serial driver's generic interrupt routine */ static irqreturn_t mxser_interrupt(int irq, void *dev_id) { struct mxser_board *brd = dev_id; struct mxser_port *port; unsigned int int_cnt, pass_counter = 0; unsigned int i, max = brd->nports; int handled = IRQ_NONE; u8 irqbits, bits, mask = BIT(max) - 1; while (pass_counter++ < MXSER_ISR_PASS_LIMIT) { irqbits = inb(brd->vector) & mask; if (irqbits == mask) break; handled = IRQ_HANDLED; for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { if (irqbits == mask) break; if (bits & irqbits) continue; port = &brd->ports[i]; int_cnt = 0; spin_lock(&port->slock); do { if (mxser_port_isr(port)) break; } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); spin_unlock(&port->slock); } } return handled; } static const struct tty_operations mxser_ops = { .open = mxser_open, .close = mxser_close, .write = mxser_write, .put_char = mxser_put_char, .flush_chars = mxser_flush_chars, .write_room = mxser_write_room, .chars_in_buffer = mxser_chars_in_buffer, .flush_buffer = mxser_flush_buffer, .ioctl = mxser_ioctl, .throttle = mxser_throttle, .unthrottle = mxser_unthrottle, .set_termios = mxser_set_termios, .stop = mxser_stop, .start = mxser_start, .hangup = mxser_hangup, .break_ctl = mxser_rs_break, .wait_until_sent = mxser_wait_until_sent, .tiocmget = mxser_tiocmget, .tiocmset = mxser_tiocmset, .set_serial = mxser_set_serial_info, .get_serial = mxser_get_serial_info, .get_icount = mxser_get_icount, }; static const struct tty_port_operations mxser_port_ops = { .carrier_raised = mxser_carrier_raised, .dtr_rts = mxser_dtr_rts, .activate = mxser_activate, .shutdown = mxser_shutdown_port, }; /* * The MOXA Smartio/Industio serial driver boot-time initialization code! */ static void mxser_initbrd(struct mxser_board *brd, bool high_baud) { struct mxser_port *info; unsigned int i; bool is_mu860; brd->must_hwid = mxser_must_get_hwid(brd->ports[0].ioaddr); is_mu860 = brd->must_hwid == MOXA_MUST_MU860_HWID; for (i = 0; i < UART_INFO_NUM; i++) { if (Gpci_uart_info[i].type == brd->must_hwid) { brd->max_baud = Gpci_uart_info[i].max_baud; /* exception....CP-102 */ if (high_baud) brd->max_baud = 921600; break; } } if (is_mu860) { /* set to RS232 mode by default */ outb(0, brd->vector + 4); outb(0, brd->vector + 0x0c); } for (i = 0; i < brd->nports; i++) { info = &brd->ports[i]; if (is_mu860) { if (i < 4) info->opmode_ioaddr = brd->vector + 4; else info->opmode_ioaddr = brd->vector + 0x0c; } tty_port_init(&info->port); info->port.ops = &mxser_port_ops; info->board = brd; /* Enhance mode enabled here */ if (brd->must_hwid != MOXA_OTHER_UART) mxser_must_set_enhance_mode(info->ioaddr, true); info->type = PORT_16550A; mxser_process_txrx_fifo(info); info->port.close_delay = 5 * HZ / 10; info->port.closing_wait = 30 * HZ; spin_lock_init(&info->slock); /* before set INT ISR, disable all int */ outb(inb(info->ioaddr + UART_IER) & 0xf0, info->ioaddr + UART_IER); } } static int mxser_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct mxser_board *brd; unsigned int i, base; unsigned long ioaddress; unsigned short nports = MXSER_NPORTS(ent->driver_data); struct device *tty_dev; int retval = -EINVAL; i = find_first_zero_bit(mxser_boards, MXSER_BOARDS); if (i >= MXSER_BOARDS) { dev_err(&pdev->dev, "too many boards found (maximum %d), board " "not configured\n", MXSER_BOARDS); goto err; } brd = devm_kzalloc(&pdev->dev, struct_size(brd, ports, nports), GFP_KERNEL); if (!brd) goto err; brd->idx = i; __set_bit(brd->idx, mxser_boards); base = i * MXSER_PORTS_PER_BOARD; retval = pcim_enable_device(pdev); if (retval) { dev_err(&pdev->dev, "PCI enable failed\n"); goto err_zero; } /* io address */ ioaddress = pci_resource_start(pdev, 2); retval = pci_request_region(pdev, 2, "mxser(IO)"); if (retval) goto err_zero; brd->nports = nports; for (i = 0; i < nports; i++) brd->ports[i].ioaddr = ioaddress + 8 * i; /* vector */ ioaddress = pci_resource_start(pdev, 3); retval = pci_request_region(pdev, 3, "mxser(vector)"); if (retval) goto err_zero; brd->vector = ioaddress; /* irq */ brd->irq = pdev->irq; mxser_initbrd(brd, ent->driver_data & MXSER_HIGHBAUD); retval = devm_request_irq(&pdev->dev, brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", brd); if (retval) { dev_err(&pdev->dev, "request irq failed"); goto err_relbrd; } for (i = 0; i < nports; i++) { tty_dev = tty_port_register_device(&brd->ports[i].port, mxvar_sdriver, base + i, &pdev->dev); if (IS_ERR(tty_dev)) { retval = PTR_ERR(tty_dev); for (; i > 0; i--) tty_unregister_device(mxvar_sdriver, base + i - 1); goto err_relbrd; } } pci_set_drvdata(pdev, brd); return 0; err_relbrd: for (i = 0; i < nports; i++) tty_port_destroy(&brd->ports[i].port); err_zero: __clear_bit(brd->idx, mxser_boards); err: return retval; } static void mxser_remove(struct pci_dev *pdev) { struct mxser_board *brd = pci_get_drvdata(pdev); unsigned int i, base = brd->idx * MXSER_PORTS_PER_BOARD; for (i = 0; i < brd->nports; i++) { tty_unregister_device(mxvar_sdriver, base + i); tty_port_destroy(&brd->ports[i].port); } __clear_bit(brd->idx, mxser_boards); } static struct pci_driver mxser_driver = { .name = "mxser", .id_table = mxser_pcibrds, .probe = mxser_probe, .remove = mxser_remove }; static int __init mxser_module_init(void) { int retval; mxvar_sdriver = tty_alloc_driver(MXSER_PORTS, TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV); if (IS_ERR(mxvar_sdriver)) return PTR_ERR(mxvar_sdriver); /* Initialize the tty_driver structure */ mxvar_sdriver->name = "ttyMI"; mxvar_sdriver->major = ttymajor; mxvar_sdriver->minor_start = 0; mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; mxvar_sdriver->init_termios = tty_std_termios; mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; tty_set_operations(mxvar_sdriver, &mxser_ops); retval = tty_register_driver(mxvar_sdriver); if (retval) { printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family " "tty driver !\n"); goto err_put; } retval = pci_register_driver(&mxser_driver); if (retval) { printk(KERN_ERR "mxser: can't register pci driver\n"); goto err_unr; } return 0; err_unr: tty_unregister_driver(mxvar_sdriver); err_put: tty_driver_kref_put(mxvar_sdriver); return retval; } static void __exit mxser_module_exit(void) { pci_unregister_driver(&mxser_driver); tty_unregister_driver(mxvar_sdriver); tty_driver_kref_put(mxvar_sdriver); } module_init(mxser_module_init); module_exit(mxser_module_exit);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1