Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Filip Kokosinski | 1676 | 91.14% | 1 | 11.11% |
Stafford Horne | 100 | 5.44% | 1 | 11.11% |
Johan Hovold | 43 | 2.34% | 2 | 22.22% |
Wei Yongjun | 9 | 0.49% | 1 | 11.11% |
Ilia Sergachev | 7 | 0.38% | 1 | 11.11% |
Jiri Slaby | 2 | 0.11% | 1 | 11.11% |
Alyssa Ross | 1 | 0.05% | 1 | 11.11% |
Ilpo Järvinen | 1 | 0.05% | 1 | 11.11% |
Total | 1839 | 9 |
// SPDX-License-Identifier: GPL-2.0 /* * LiteUART serial controller (LiteX) Driver * * Copyright (C) 2019-2020 Antmicro <www.antmicro.com> */ #include <linux/console.h> #include <linux/litex.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/serial.h> #include <linux/serial_core.h> #include <linux/slab.h> #include <linux/timer.h> #include <linux/tty_flip.h> #include <linux/xarray.h> /* * CSRs definitions (base address offsets + width) * * The definitions below are true for LiteX SoC configured for 8-bit CSR Bus, * 32-bit aligned. * * Supporting other configurations might require new definitions or a more * generic way of indexing the LiteX CSRs. * * For more details on how CSRs are defined and handled in LiteX, see comments * in the LiteX SoC Driver: drivers/soc/litex/litex_soc_ctrl.c */ #define OFF_RXTX 0x00 #define OFF_TXFULL 0x04 #define OFF_RXEMPTY 0x08 #define OFF_EV_STATUS 0x0c #define OFF_EV_PENDING 0x10 #define OFF_EV_ENABLE 0x14 /* events */ #define EV_TX 0x1 #define EV_RX 0x2 struct liteuart_port { struct uart_port port; struct timer_list timer; u32 id; }; #define to_liteuart_port(port) container_of(port, struct liteuart_port, port) static DEFINE_XARRAY_FLAGS(liteuart_array, XA_FLAGS_ALLOC); #ifdef CONFIG_SERIAL_LITEUART_CONSOLE static struct console liteuart_console; #endif static struct uart_driver liteuart_driver = { .owner = THIS_MODULE, .driver_name = "liteuart", .dev_name = "ttyLXU", .major = 0, .minor = 0, .nr = CONFIG_SERIAL_LITEUART_MAX_PORTS, #ifdef CONFIG_SERIAL_LITEUART_CONSOLE .cons = &liteuart_console, #endif }; static void liteuart_timer(struct timer_list *t) { struct liteuart_port *uart = from_timer(uart, t, timer); struct uart_port *port = &uart->port; unsigned char __iomem *membase = port->membase; unsigned int flg = TTY_NORMAL; int ch; unsigned long status; while ((status = !litex_read8(membase + OFF_RXEMPTY)) == 1) { ch = litex_read8(membase + OFF_RXTX); port->icount.rx++; /* necessary for RXEMPTY to refresh its value */ litex_write8(membase + OFF_EV_PENDING, EV_TX | EV_RX); /* no overflow bits in status */ if (!(uart_handle_sysrq_char(port, ch))) uart_insert_char(port, status, 0, ch, flg); tty_flip_buffer_push(&port->state->port); } mod_timer(&uart->timer, jiffies + uart_poll_timeout(port)); } static void liteuart_putchar(struct uart_port *port, unsigned char ch) { while (litex_read8(port->membase + OFF_TXFULL)) cpu_relax(); litex_write8(port->membase + OFF_RXTX, ch); } static unsigned int liteuart_tx_empty(struct uart_port *port) { /* not really tx empty, just checking if tx is not full */ if (!litex_read8(port->membase + OFF_TXFULL)) return TIOCSER_TEMT; return 0; } static void liteuart_set_mctrl(struct uart_port *port, unsigned int mctrl) { /* modem control register is not present in LiteUART */ } static unsigned int liteuart_get_mctrl(struct uart_port *port) { return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; } static void liteuart_stop_tx(struct uart_port *port) { } static void liteuart_start_tx(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; unsigned char ch; if (unlikely(port->x_char)) { litex_write8(port->membase + OFF_RXTX, port->x_char); port->icount.tx++; port->x_char = 0; } else if (!uart_circ_empty(xmit)) { while (xmit->head != xmit->tail) { ch = xmit->buf[xmit->tail]; xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; liteuart_putchar(port, ch); } } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); } static void liteuart_stop_rx(struct uart_port *port) { struct liteuart_port *uart = to_liteuart_port(port); /* just delete timer */ del_timer(&uart->timer); } static void liteuart_break_ctl(struct uart_port *port, int break_state) { /* LiteUART doesn't support sending break signal */ } static int liteuart_startup(struct uart_port *port) { struct liteuart_port *uart = to_liteuart_port(port); /* disable events */ litex_write8(port->membase + OFF_EV_ENABLE, 0); /* prepare timer for polling */ timer_setup(&uart->timer, liteuart_timer, 0); mod_timer(&uart->timer, jiffies + uart_poll_timeout(port)); return 0; } static void liteuart_shutdown(struct uart_port *port) { } static void liteuart_set_termios(struct uart_port *port, struct ktermios *new, const struct ktermios *old) { unsigned int baud; unsigned long flags; spin_lock_irqsave(&port->lock, flags); /* update baudrate */ baud = uart_get_baud_rate(port, new, old, 0, 460800); uart_update_timeout(port, new->c_cflag, baud); spin_unlock_irqrestore(&port->lock, flags); } static const char *liteuart_type(struct uart_port *port) { return "liteuart"; } static void liteuart_release_port(struct uart_port *port) { } static int liteuart_request_port(struct uart_port *port) { return 0; } static void liteuart_config_port(struct uart_port *port, int flags) { /* * Driver core for serial ports forces a non-zero value for port type. * Write an arbitrary value here to accommodate the serial core driver, * as ID part of UAPI is redundant. */ port->type = 1; } static int liteuart_verify_port(struct uart_port *port, struct serial_struct *ser) { if (port->type != PORT_UNKNOWN && ser->type != 1) return -EINVAL; return 0; } static const struct uart_ops liteuart_ops = { .tx_empty = liteuart_tx_empty, .set_mctrl = liteuart_set_mctrl, .get_mctrl = liteuart_get_mctrl, .stop_tx = liteuart_stop_tx, .start_tx = liteuart_start_tx, .stop_rx = liteuart_stop_rx, .break_ctl = liteuart_break_ctl, .startup = liteuart_startup, .shutdown = liteuart_shutdown, .set_termios = liteuart_set_termios, .type = liteuart_type, .release_port = liteuart_release_port, .request_port = liteuart_request_port, .config_port = liteuart_config_port, .verify_port = liteuart_verify_port, }; static int liteuart_probe(struct platform_device *pdev) { struct liteuart_port *uart; struct uart_port *port; struct xa_limit limit; int dev_id, ret; /* look for aliases; auto-enumerate for free index if not found */ dev_id = of_alias_get_id(pdev->dev.of_node, "serial"); if (dev_id < 0) limit = XA_LIMIT(0, CONFIG_SERIAL_LITEUART_MAX_PORTS); else limit = XA_LIMIT(dev_id, dev_id); uart = devm_kzalloc(&pdev->dev, sizeof(struct liteuart_port), GFP_KERNEL); if (!uart) return -ENOMEM; ret = xa_alloc(&liteuart_array, &dev_id, uart, limit, GFP_KERNEL); if (ret) return ret; uart->id = dev_id; port = &uart->port; /* get membase */ port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); if (IS_ERR(port->membase)) { ret = PTR_ERR(port->membase); goto err_erase_id; } /* values not from device tree */ port->dev = &pdev->dev; port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF; port->ops = &liteuart_ops; port->regshift = 2; port->fifosize = 16; port->iobase = 1; port->type = PORT_UNKNOWN; port->line = dev_id; spin_lock_init(&port->lock); platform_set_drvdata(pdev, port); ret = uart_add_one_port(&liteuart_driver, &uart->port); if (ret) goto err_erase_id; return 0; err_erase_id: xa_erase(&liteuart_array, uart->id); return ret; } static int liteuart_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct liteuart_port *uart = to_liteuart_port(port); uart_remove_one_port(&liteuart_driver, port); xa_erase(&liteuart_array, uart->id); return 0; } static const struct of_device_id liteuart_of_match[] = { { .compatible = "litex,liteuart" }, {} }; MODULE_DEVICE_TABLE(of, liteuart_of_match); static struct platform_driver liteuart_platform_driver = { .probe = liteuart_probe, .remove = liteuart_remove, .driver = { .name = "liteuart", .of_match_table = liteuart_of_match, }, }; #ifdef CONFIG_SERIAL_LITEUART_CONSOLE static void liteuart_console_write(struct console *co, const char *s, unsigned int count) { struct liteuart_port *uart; struct uart_port *port; unsigned long flags; uart = (struct liteuart_port *)xa_load(&liteuart_array, co->index); port = &uart->port; spin_lock_irqsave(&port->lock, flags); uart_console_write(port, s, count, liteuart_putchar); spin_unlock_irqrestore(&port->lock, flags); } static int liteuart_console_setup(struct console *co, char *options) { struct liteuart_port *uart; struct uart_port *port; int baud = 115200; int bits = 8; int parity = 'n'; int flow = 'n'; uart = (struct liteuart_port *)xa_load(&liteuart_array, co->index); if (!uart) return -ENODEV; port = &uart->port; if (!port->membase) return -ENODEV; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); return uart_set_options(port, co, baud, parity, bits, flow); } static struct console liteuart_console = { .name = "liteuart", .write = liteuart_console_write, .device = uart_console_device, .setup = liteuart_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &liteuart_driver, }; static int __init liteuart_console_init(void) { register_console(&liteuart_console); return 0; } console_initcall(liteuart_console_init); static void early_liteuart_write(struct console *console, const char *s, unsigned int count) { struct earlycon_device *device = console->data; struct uart_port *port = &device->port; uart_console_write(port, s, count, liteuart_putchar); } static int __init early_liteuart_setup(struct earlycon_device *device, const char *options) { if (!device->port.membase) return -ENODEV; device->con->write = early_liteuart_write; return 0; } OF_EARLYCON_DECLARE(liteuart, "litex,liteuart", early_liteuart_setup); #endif /* CONFIG_SERIAL_LITEUART_CONSOLE */ static int __init liteuart_init(void) { int res; res = uart_register_driver(&liteuart_driver); if (res) return res; res = platform_driver_register(&liteuart_platform_driver); if (res) { uart_unregister_driver(&liteuart_driver); return res; } return 0; } static void __exit liteuart_exit(void) { platform_driver_unregister(&liteuart_platform_driver); uart_unregister_driver(&liteuart_driver); } module_init(liteuart_init); module_exit(liteuart_exit); MODULE_AUTHOR("Antmicro <www.antmicro.com>"); MODULE_DESCRIPTION("LiteUART serial driver"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:liteuart");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1