Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Chunfeng Yun | 1235 | 83.22% | 4 | 40.00% |
Paul Cercueil | 103 | 6.94% | 1 | 10.00% |
Prashanth K | 86 | 5.80% | 1 | 10.00% |
Thierry Reding | 47 | 3.17% | 1 | 10.00% |
Bryan O'Donoghue | 6 | 0.40% | 1 | 10.00% |
Christophe Jaillet | 6 | 0.40% | 1 | 10.00% |
Lee Jones | 1 | 0.07% | 1 | 10.00% |
Total | 1484 | 10 |
// SPDX-License-Identifier: GPL-2.0 /* * USB GPIO Based Connection Detection Driver * * Copyright (C) 2019 MediaTek Inc. * * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> * * Some code borrowed from drivers/extcon/extcon-usb-gpio.c */ #include <linux/device.h> #include <linux/gpio/consumer.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/module.h> #include <linux/of.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/power_supply.h> #include <linux/regulator/consumer.h> #include <linux/usb/role.h> #define USB_GPIO_DEB_MS 20 /* ms */ #define USB_GPIO_DEB_US ((USB_GPIO_DEB_MS) * 1000) /* us */ #define USB_CONN_IRQF \ (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT) struct usb_conn_info { struct device *dev; struct usb_role_switch *role_sw; enum usb_role last_role; struct regulator *vbus; struct delayed_work dw_det; unsigned long debounce_jiffies; struct gpio_desc *id_gpiod; struct gpio_desc *vbus_gpiod; int id_irq; int vbus_irq; struct power_supply_desc desc; struct power_supply *charger; }; /* * "DEVICE" = VBUS and "HOST" = !ID, so we have: * Both "DEVICE" and "HOST" can't be set as active at the same time * so if "HOST" is active (i.e. ID is 0) we keep "DEVICE" inactive * even if VBUS is on. * * Role | ID | VBUS * ------------------------------------ * [1] DEVICE | H | H * [2] NONE | H | L * [3] HOST | L | H * [4] HOST | L | L * * In case we have only one of these signals: * - VBUS only - we want to distinguish between [1] and [2], so ID is always 1 * - ID only - we want to distinguish between [1] and [4], so VBUS = ID */ static void usb_conn_detect_cable(struct work_struct *work) { struct usb_conn_info *info; enum usb_role role; int id, vbus, ret; info = container_of(to_delayed_work(work), struct usb_conn_info, dw_det); /* check ID and VBUS */ id = info->id_gpiod ? gpiod_get_value_cansleep(info->id_gpiod) : 1; vbus = info->vbus_gpiod ? gpiod_get_value_cansleep(info->vbus_gpiod) : id; if (!id) role = USB_ROLE_HOST; else if (vbus) role = USB_ROLE_DEVICE; else role = USB_ROLE_NONE; dev_dbg(info->dev, "role %s -> %s, gpios: id %d, vbus %d\n", usb_role_string(info->last_role), usb_role_string(role), id, vbus); if (info->last_role == role) { dev_warn(info->dev, "repeated role: %s\n", usb_role_string(role)); return; } if (info->last_role == USB_ROLE_HOST && info->vbus) regulator_disable(info->vbus); ret = usb_role_switch_set_role(info->role_sw, role); if (ret) dev_err(info->dev, "failed to set role: %d\n", ret); if (role == USB_ROLE_HOST && info->vbus) { ret = regulator_enable(info->vbus); if (ret) dev_err(info->dev, "enable vbus regulator failed\n"); } info->last_role = role; if (info->vbus) dev_dbg(info->dev, "vbus regulator is %s\n", regulator_is_enabled(info->vbus) ? "enabled" : "disabled"); power_supply_changed(info->charger); } static void usb_conn_queue_dwork(struct usb_conn_info *info, unsigned long delay) { queue_delayed_work(system_power_efficient_wq, &info->dw_det, delay); } static irqreturn_t usb_conn_isr(int irq, void *dev_id) { struct usb_conn_info *info = dev_id; usb_conn_queue_dwork(info, info->debounce_jiffies); return IRQ_HANDLED; } static enum power_supply_property usb_charger_properties[] = { POWER_SUPPLY_PROP_ONLINE, }; static int usb_charger_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { struct usb_conn_info *info = power_supply_get_drvdata(psy); switch (psp) { case POWER_SUPPLY_PROP_ONLINE: val->intval = info->last_role == USB_ROLE_DEVICE; break; default: return -EINVAL; } return 0; } static int usb_conn_psy_register(struct usb_conn_info *info) { struct device *dev = info->dev; struct power_supply_desc *desc = &info->desc; struct power_supply_config cfg = { .of_node = dev->of_node, }; desc->name = "usb-charger"; desc->properties = usb_charger_properties; desc->num_properties = ARRAY_SIZE(usb_charger_properties); desc->get_property = usb_charger_get_property; desc->type = POWER_SUPPLY_TYPE_USB; cfg.drv_data = info; info->charger = devm_power_supply_register(dev, desc, &cfg); if (IS_ERR(info->charger)) dev_err(dev, "Unable to register charger\n"); return PTR_ERR_OR_ZERO(info->charger); } static int usb_conn_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct usb_conn_info *info; int ret = 0; info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; info->dev = dev; info->id_gpiod = devm_gpiod_get_optional(dev, "id", GPIOD_IN); if (IS_ERR(info->id_gpiod)) return PTR_ERR(info->id_gpiod); info->vbus_gpiod = devm_gpiod_get_optional(dev, "vbus", GPIOD_IN); if (IS_ERR(info->vbus_gpiod)) return PTR_ERR(info->vbus_gpiod); if (!info->id_gpiod && !info->vbus_gpiod) { dev_err(dev, "failed to get gpios\n"); return -ENODEV; } if (info->id_gpiod) ret = gpiod_set_debounce(info->id_gpiod, USB_GPIO_DEB_US); if (!ret && info->vbus_gpiod) ret = gpiod_set_debounce(info->vbus_gpiod, USB_GPIO_DEB_US); if (ret < 0) info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEB_MS); INIT_DELAYED_WORK(&info->dw_det, usb_conn_detect_cable); info->vbus = devm_regulator_get_optional(dev, "vbus"); if (PTR_ERR(info->vbus) == -ENODEV) info->vbus = NULL; if (IS_ERR(info->vbus)) return dev_err_probe(dev, PTR_ERR(info->vbus), "failed to get vbus\n"); info->role_sw = usb_role_switch_get(dev); if (IS_ERR(info->role_sw)) return dev_err_probe(dev, PTR_ERR(info->role_sw), "failed to get role switch\n"); ret = usb_conn_psy_register(info); if (ret) goto put_role_sw; if (info->id_gpiod) { info->id_irq = gpiod_to_irq(info->id_gpiod); if (info->id_irq < 0) { dev_err(dev, "failed to get ID IRQ\n"); ret = info->id_irq; goto put_role_sw; } ret = devm_request_threaded_irq(dev, info->id_irq, NULL, usb_conn_isr, USB_CONN_IRQF, pdev->name, info); if (ret < 0) { dev_err(dev, "failed to request ID IRQ\n"); goto put_role_sw; } } if (info->vbus_gpiod) { info->vbus_irq = gpiod_to_irq(info->vbus_gpiod); if (info->vbus_irq < 0) { dev_err(dev, "failed to get VBUS IRQ\n"); ret = info->vbus_irq; goto put_role_sw; } ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL, usb_conn_isr, USB_CONN_IRQF, pdev->name, info); if (ret < 0) { dev_err(dev, "failed to request VBUS IRQ\n"); goto put_role_sw; } } platform_set_drvdata(pdev, info); device_set_wakeup_capable(&pdev->dev, true); /* Perform initial detection */ usb_conn_queue_dwork(info, 0); return 0; put_role_sw: usb_role_switch_put(info->role_sw); return ret; } static int usb_conn_remove(struct platform_device *pdev) { struct usb_conn_info *info = platform_get_drvdata(pdev); cancel_delayed_work_sync(&info->dw_det); if (info->last_role == USB_ROLE_HOST && info->vbus) regulator_disable(info->vbus); usb_role_switch_put(info->role_sw); return 0; } static int __maybe_unused usb_conn_suspend(struct device *dev) { struct usb_conn_info *info = dev_get_drvdata(dev); if (device_may_wakeup(dev)) { if (info->id_gpiod) enable_irq_wake(info->id_irq); if (info->vbus_gpiod) enable_irq_wake(info->vbus_irq); return 0; } if (info->id_gpiod) disable_irq(info->id_irq); if (info->vbus_gpiod) disable_irq(info->vbus_irq); pinctrl_pm_select_sleep_state(dev); return 0; } static int __maybe_unused usb_conn_resume(struct device *dev) { struct usb_conn_info *info = dev_get_drvdata(dev); if (device_may_wakeup(dev)) { if (info->id_gpiod) disable_irq_wake(info->id_irq); if (info->vbus_gpiod) disable_irq_wake(info->vbus_irq); return 0; } pinctrl_pm_select_default_state(dev); if (info->id_gpiod) enable_irq(info->id_irq); if (info->vbus_gpiod) enable_irq(info->vbus_irq); usb_conn_queue_dwork(info, 0); return 0; } static SIMPLE_DEV_PM_OPS(usb_conn_pm_ops, usb_conn_suspend, usb_conn_resume); static const struct of_device_id usb_conn_dt_match[] = { { .compatible = "gpio-usb-b-connector", }, { } }; MODULE_DEVICE_TABLE(of, usb_conn_dt_match); static struct platform_driver usb_conn_driver = { .probe = usb_conn_probe, .remove = usb_conn_remove, .driver = { .name = "usb-conn-gpio", .pm = &usb_conn_pm_ops, .of_match_table = usb_conn_dt_match, }, }; module_platform_driver(usb_conn_driver); MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); MODULE_DESCRIPTION("USB GPIO based connection detection driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1