| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Håvard Skinnemoen | 1042 | 85.76% | 2 | 9.52% |
| Boris Brezillon | 44 | 3.62% | 3 | 14.29% |
| Gregory CLEMENT | 41 | 3.37% | 1 | 4.76% |
| Cristian Birsan | 30 | 2.47% | 2 | 9.52% |
| Alexandre Belloni | 17 | 1.40% | 3 | 14.29% |
| Stelian Pop | 12 | 0.99% | 1 | 4.76% |
| Sylvain Rochet | 8 | 0.66% | 1 | 4.76% |
| Jean-Christophe Plagniol-Villard | 8 | 0.66% | 2 | 9.52% |
| Ludovic Desroches | 6 | 0.49% | 1 | 4.76% |
| Jonas Bonn | 3 | 0.25% | 1 | 4.76% |
| Greg Kroah-Hartman | 2 | 0.16% | 2 | 9.52% |
| Bo Shen | 1 | 0.08% | 1 | 4.76% |
| David Brownell | 1 | 0.08% | 1 | 4.76% |
| Total | 1215 | 21 |
// SPDX-License-Identifier: GPL-2.0 /* * Driver for the Atmel USBA high speed USB device controller * * Copyright (C) 2005-2007 Atmel Corporation */ #ifndef __LINUX_USB_GADGET_USBA_UDC_H__ #define __LINUX_USB_GADGET_USBA_UDC_H__ #include <linux/gpio/consumer.h> /* USB register offsets */ #define USBA_CTRL 0x0000 #define USBA_FNUM 0x0004 #define USBA_INT_ENB 0x0010 #define USBA_INT_STA 0x0014 #define USBA_INT_CLR 0x0018 #define USBA_EPT_RST 0x001c #define USBA_TST 0x00e0 /* USB endpoint register offsets */ #define USBA_EPT_CFG 0x0000 #define USBA_EPT_CTL_ENB 0x0004 #define USBA_EPT_CTL_DIS 0x0008 #define USBA_EPT_CTL 0x000c #define USBA_EPT_SET_STA 0x0014 #define USBA_EPT_CLR_STA 0x0018 #define USBA_EPT_STA 0x001c /* USB DMA register offsets */ #define USBA_DMA_NXT_DSC 0x0000 #define USBA_DMA_ADDRESS 0x0004 #define USBA_DMA_CONTROL 0x0008 #define USBA_DMA_STATUS 0x000c /* Bitfields in CTRL */ #define USBA_DEV_ADDR_OFFSET 0 #define USBA_DEV_ADDR_SIZE 7 #define USBA_FADDR_EN (1 << 7) #define USBA_EN_USBA (1 << 8) #define USBA_DETACH (1 << 9) #define USBA_REMOTE_WAKE_UP (1 << 10) #define USBA_PULLD_DIS (1 << 11) #define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS) #define USBA_DISABLE_MASK USBA_DETACH /* Bitfields in FNUM */ #define USBA_MICRO_FRAME_NUM_OFFSET 0 #define USBA_MICRO_FRAME_NUM_SIZE 3 #define USBA_FRAME_NUMBER_OFFSET 3 #define USBA_FRAME_NUMBER_SIZE 11 #define USBA_FRAME_NUM_ERROR (1 << 31) /* Bitfields in INT_ENB/INT_STA/INT_CLR */ #define USBA_HIGH_SPEED (1 << 0) #define USBA_DET_SUSPEND (1 << 1) #define USBA_MICRO_SOF (1 << 2) #define USBA_SOF (1 << 3) #define USBA_END_OF_RESET (1 << 4) #define USBA_WAKE_UP (1 << 5) #define USBA_END_OF_RESUME (1 << 6) #define USBA_UPSTREAM_RESUME (1 << 7) #define USBA_EPT_INT_OFFSET 8 #define USBA_EPT_INT_SIZE 16 #define USBA_DMA_INT_OFFSET 24 #define USBA_DMA_INT_SIZE 8 /* Bitfields in EPT_RST */ #define USBA_RST_OFFSET 0 #define USBA_RST_SIZE 16 /* Bitfields in USBA_TST */ #define USBA_SPEED_CFG_OFFSET 0 #define USBA_SPEED_CFG_SIZE 2 #define USBA_TST_J_MODE (1 << 2) #define USBA_TST_K_MODE (1 << 3) #define USBA_TST_PKT_MODE (1 << 4) #define USBA_OPMODE2 (1 << 5) /* Bitfields in EPT_CFG */ #define USBA_EPT_SIZE_OFFSET 0 #define USBA_EPT_SIZE_SIZE 3 #define USBA_EPT_DIR_IN (1 << 3) #define USBA_EPT_TYPE_OFFSET 4 #define USBA_EPT_TYPE_SIZE 2 #define USBA_BK_NUMBER_OFFSET 6 #define USBA_BK_NUMBER_SIZE 2 #define USBA_NB_TRANS_OFFSET 8 #define USBA_NB_TRANS_SIZE 2 #define USBA_EPT_MAPPED (1 << 31) /* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */ #define USBA_EPT_ENABLE (1 << 0) #define USBA_AUTO_VALID (1 << 1) #define USBA_INTDIS_DMA (1 << 3) #define USBA_NYET_DIS (1 << 4) #define USBA_DATAX_RX (1 << 6) #define USBA_MDATA_RX (1 << 7) /* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */ #define USBA_BUSY_BANK_IE (1 << 18) /* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */ #define USBA_FORCE_STALL (1 << 5) #define USBA_TOGGLE_CLR (1 << 6) #define USBA_TOGGLE_SEQ_OFFSET 6 #define USBA_TOGGLE_SEQ_SIZE 2 #define USBA_ERR_OVFLW (1 << 8) #define USBA_RX_BK_RDY (1 << 9) #define USBA_KILL_BANK (1 << 9) #define USBA_TX_COMPLETE (1 << 10) #define USBA_TX_PK_RDY (1 << 11) #define USBA_ISO_ERR_TRANS (1 << 11) #define USBA_RX_SETUP (1 << 12) #define USBA_ISO_ERR_FLOW (1 << 12) #define USBA_STALL_SENT (1 << 13) #define USBA_ISO_ERR_CRC (1 << 13) #define USBA_ISO_ERR_NBTRANS (1 << 13) #define USBA_NAK_IN (1 << 14) #define USBA_ISO_ERR_FLUSH (1 << 14) #define USBA_NAK_OUT (1 << 15) #define USBA_CURRENT_BANK_OFFSET 16 #define USBA_CURRENT_BANK_SIZE 2 #define USBA_BUSY_BANKS_OFFSET 18 #define USBA_BUSY_BANKS_SIZE 2 #define USBA_BYTE_COUNT_OFFSET 20 #define USBA_BYTE_COUNT_SIZE 11 #define USBA_SHORT_PACKET (1 << 31) /* Bitfields in DMA_CONTROL */ #define USBA_DMA_CH_EN (1 << 0) #define USBA_DMA_LINK (1 << 1) #define USBA_DMA_END_TR_EN (1 << 2) #define USBA_DMA_END_BUF_EN (1 << 3) #define USBA_DMA_END_TR_IE (1 << 4) #define USBA_DMA_END_BUF_IE (1 << 5) #define USBA_DMA_DESC_LOAD_IE (1 << 6) #define USBA_DMA_BURST_LOCK (1 << 7) #define USBA_DMA_BUF_LEN_OFFSET 16 #define USBA_DMA_BUF_LEN_SIZE 16 /* Bitfields in DMA_STATUS */ #define USBA_DMA_CH_ACTIVE (1 << 1) #define USBA_DMA_END_TR_ST (1 << 4) #define USBA_DMA_END_BUF_ST (1 << 5) #define USBA_DMA_DESC_LOAD_ST (1 << 6) /* Constants for SPEED_CFG */ #define USBA_SPEED_CFG_NORMAL 0 #define USBA_SPEED_CFG_FORCE_HIGH 2 #define USBA_SPEED_CFG_FORCE_FULL 3 /* Constants for EPT_SIZE */ #define USBA_EPT_SIZE_8 0 #define USBA_EPT_SIZE_16 1 #define USBA_EPT_SIZE_32 2 #define USBA_EPT_SIZE_64 3 #define USBA_EPT_SIZE_128 4 #define USBA_EPT_SIZE_256 5 #define USBA_EPT_SIZE_512 6 #define USBA_EPT_SIZE_1024 7 /* Constants for EPT_TYPE */ #define USBA_EPT_TYPE_CONTROL 0 #define USBA_EPT_TYPE_ISO 1 #define USBA_EPT_TYPE_BULK 2 #define USBA_EPT_TYPE_INT 3 /* Constants for BK_NUMBER */ #define USBA_BK_NUMBER_ZERO 0 #define USBA_BK_NUMBER_ONE 1 #define USBA_BK_NUMBER_DOUBLE 2 #define USBA_BK_NUMBER_TRIPLE 3 /* Bit manipulation macros */ #define USBA_BF(name, value) \ (((value) & ((1 << USBA_##name##_SIZE) - 1)) \ << USBA_##name##_OFFSET) #define USBA_BFEXT(name, value) \ (((value) >> USBA_##name##_OFFSET) \ & ((1 << USBA_##name##_SIZE) - 1)) #define USBA_BFINS(name, value, old) \ (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \ << USBA_##name##_OFFSET)) \ | USBA_BF(name, value)) /* Register access macros */ #define usba_readl(udc, reg) \ readl_relaxed((udc)->regs + USBA_##reg) #define usba_writel(udc, reg, value) \ writel_relaxed((value), (udc)->regs + USBA_##reg) #define usba_ep_readl(ep, reg) \ readl_relaxed((ep)->ep_regs + USBA_EPT_##reg) #define usba_ep_writel(ep, reg, value) \ writel_relaxed((value), (ep)->ep_regs + USBA_EPT_##reg) #define usba_dma_readl(ep, reg) \ readl_relaxed((ep)->dma_regs + USBA_DMA_##reg) #define usba_dma_writel(ep, reg, value) \ writel_relaxed((value), (ep)->dma_regs + USBA_DMA_##reg) /* Calculate base address for a given endpoint or DMA controller */ #define USBA_EPT_BASE(x) (0x100 + (x) * 0x20) #define USBA_DMA_BASE(x) (0x300 + (x) * 0x10) #define USBA_FIFO_BASE(x) ((x) << 16) /* Synth parameters */ #define USBA_NR_DMAS 7 #define EP0_FIFO_SIZE 64 #define EP0_EPT_SIZE USBA_EPT_SIZE_64 #define EP0_NR_BANKS 1 #define FIFO_IOMEM_ID 0 #define CTRL_IOMEM_ID 1 #define DBG_ERR 0x0001 /* report all error returns */ #define DBG_HW 0x0002 /* debug hardware initialization */ #define DBG_GADGET 0x0004 /* calls to/from gadget driver */ #define DBG_INT 0x0008 /* interrupts */ #define DBG_BUS 0x0010 /* report changes in bus state */ #define DBG_QUEUE 0x0020 /* debug request queue processing */ #define DBG_FIFO 0x0040 /* debug FIFO contents */ #define DBG_DMA 0x0080 /* debug DMA handling */ #define DBG_REQ 0x0100 /* print out queued request length */ #define DBG_ALL 0xffff #define DBG_NONE 0x0000 #define DEBUG_LEVEL (DBG_ERR) #define DBG(level, fmt, ...) \ do { \ if ((level) & DEBUG_LEVEL) \ pr_debug("udc: " fmt, ## __VA_ARGS__); \ } while (0) enum usba_ctrl_state { WAIT_FOR_SETUP, DATA_STAGE_IN, DATA_STAGE_OUT, STATUS_STAGE_IN, STATUS_STAGE_OUT, STATUS_STAGE_ADDR, STATUS_STAGE_TEST, }; /* EP_STATE_IDLE, EP_STATE_SETUP, EP_STATE_IN_DATA, EP_STATE_OUT_DATA, EP_STATE_SET_ADDR_STATUS, EP_STATE_RX_STATUS, EP_STATE_TX_STATUS, EP_STATE_HALT, */ struct usba_dma_desc { dma_addr_t next; dma_addr_t addr; u32 ctrl; }; struct usba_fifo_cfg { u8 hw_ep_num; u16 fifo_size; u8 nr_banks; }; struct usba_ep { int state; void __iomem *ep_regs; void __iomem *dma_regs; void __iomem *fifo; char name[8]; struct usb_ep ep; struct usba_udc *udc; struct list_head queue; u16 fifo_size; u8 nr_banks; u8 index; unsigned int can_dma:1; unsigned int can_isoc:1; unsigned int is_isoc:1; unsigned int is_in:1; unsigned long ept_cfg; #ifdef CONFIG_USB_GADGET_DEBUG_FS u32 last_dma_status; struct dentry *debugfs_dir; #endif }; struct usba_ep_config { u8 nr_banks; unsigned int can_dma:1; unsigned int can_isoc:1; }; struct usba_request { struct usb_request req; struct list_head queue; u32 ctrl; unsigned int submitted:1; unsigned int last_transaction:1; unsigned int using_dma:1; unsigned int mapped:1; }; struct usba_udc_errata { void (*toggle_bias)(struct usba_udc *udc, int is_on); void (*pulse_bias)(struct usba_udc *udc); }; struct usba_udc_config { const struct usba_udc_errata *errata; const struct usba_ep_config *config; const int num_ep; const bool ep_prealloc; }; struct usba_udc { /* Protect hw registers from concurrent modifications */ spinlock_t lock; /* Mutex to prevent concurrent start or stop */ struct mutex vbus_mutex; void __iomem *regs; void __iomem *fifo; struct usb_gadget gadget; struct usb_gadget_driver *driver; struct platform_device *pdev; const struct usba_udc_errata *errata; int irq; struct gpio_desc *vbus_pin; int num_ep; struct usba_fifo_cfg *fifo_cfg; struct clk *pclk; struct clk *hclk; struct usba_ep *usba_ep; bool bias_pulse_needed; bool clocked; bool suspended; bool ep_prealloc; u16 devstatus; u16 test_mode; int vbus_prev; u32 int_enb_cache; #ifdef CONFIG_USB_GADGET_DEBUG_FS struct dentry *debugfs_root; #endif struct regmap *pmc; }; static inline struct usba_ep *to_usba_ep(struct usb_ep *ep) { return container_of(ep, struct usba_ep, ep); } static inline struct usba_request *to_usba_req(struct usb_request *req) { return container_of(req, struct usba_request, req); } static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget) { return container_of(gadget, struct usba_udc, gadget); } #define ep_is_control(ep) ((ep)->index == 0) #define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE) #endif /* __LINUX_USB_GADGET_USBA_UDC_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1