Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Giel van Schijndel | 1557 | 56.19% | 2 | 6.90% |
Ahmad Fatoum | 741 | 26.74% | 9 | 31.03% |
Ji-Ze Hong (Peter Hong) | 93 | 3.36% | 3 | 10.34% |
Lutz Ballaschke | 79 | 2.85% | 2 | 6.90% |
Knud Poulsen | 59 | 2.13% | 3 | 10.34% |
Maciej S. Szmigiero | 58 | 2.09% | 1 | 3.45% |
Jaret Cantu | 58 | 2.09% | 1 | 3.45% |
Joe Perches | 45 | 1.62% | 1 | 3.45% |
Michel Arboi | 31 | 1.12% | 1 | 3.45% |
AaeonIot | 27 | 0.97% | 1 | 3.45% |
Jiasheng Jiang | 9 | 0.32% | 1 | 3.45% |
Justin Wheeler | 9 | 0.32% | 1 | 3.45% |
Arnd Bergmann | 2 | 0.07% | 1 | 3.45% |
Thomas Gleixner | 2 | 0.07% | 1 | 3.45% |
Rusty Russell | 1 | 0.04% | 1 | 3.45% |
Total | 2771 | 29 |
// SPDX-License-Identifier: GPL-2.0-or-later /*************************************************************************** * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> * * Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com> * * Copyright (C) 2010 Giel van Schijndel <me@mortis.eu> * * * ***************************************************************************/ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/err.h> #include <linux/init.h> #include <linux/io.h> #include <linux/ioport.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/watchdog.h> #define DRVNAME "f71808e_wdt" #define SIO_F71808FG_LD_WDT 0x07 /* Watchdog timer logical device */ #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ #define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ #define SIO_REG_LDSEL 0x07 /* Logical device select */ #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ #define SIO_REG_DEVREV 0x22 /* Device revision */ #define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */ #define SIO_REG_CLOCK_SEL 0x26 /* Clock select */ #define SIO_REG_ROM_ADDR_SEL 0x27 /* ROM address select */ #define SIO_F81866_REG_PORT_SEL 0x27 /* F81866 Multi-Function Register */ #define SIO_REG_TSI_LEVEL_SEL 0x28 /* TSI Level select */ #define SIO_REG_MFUNCT1 0x29 /* Multi function select 1 */ #define SIO_REG_MFUNCT2 0x2a /* Multi function select 2 */ #define SIO_REG_MFUNCT3 0x2b /* Multi function select 3 */ #define SIO_F81866_REG_GPIO1 0x2c /* F81866 GPIO1 Enable Register */ #define SIO_REG_ENABLE 0x30 /* Logical device enable */ #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ #define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */ #define SIO_F71808_ID 0x0901 /* Chipset ID */ #define SIO_F71858_ID 0x0507 /* Chipset ID */ #define SIO_F71862_ID 0x0601 /* Chipset ID */ #define SIO_F71868_ID 0x1106 /* Chipset ID */ #define SIO_F71869_ID 0x0814 /* Chipset ID */ #define SIO_F71869A_ID 0x1007 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ #define SIO_F71889_ID 0x0723 /* Chipset ID */ #define SIO_F81803_ID 0x1210 /* Chipset ID */ #define SIO_F81865_ID 0x0704 /* Chipset ID */ #define SIO_F81866_ID 0x1010 /* Chipset ID */ #define SIO_F81966_ID 0x1502 /* F81804 chipset ID, same for f81966 */ #define F71808FG_REG_WDO_CONF 0xf0 #define F71808FG_REG_WDT_CONF 0xf5 #define F71808FG_REG_WD_TIME 0xf6 #define F71808FG_FLAG_WDOUT_EN 7 #define F71808FG_FLAG_WDTMOUT_STS 6 #define F71808FG_FLAG_WD_EN 5 #define F71808FG_FLAG_WD_PULSE 4 #define F71808FG_FLAG_WD_UNIT 3 #define F81865_REG_WDO_CONF 0xfa #define F81865_FLAG_WDOUT_EN 0 /* Default values */ #define WATCHDOG_TIMEOUT 60 /* 1 minute default timeout */ #define WATCHDOG_MAX_TIMEOUT (60 * 255) #define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for watchdog signal */ #define WATCHDOG_F71862FG_PIN 63 /* default watchdog reset output pin number 63 */ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); static int timeout = WATCHDOG_TIMEOUT; /* default timeout in seconds */ module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=" __MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH; module_param(pulse_width, uint, 0); MODULE_PARM_DESC(pulse_width, "Watchdog signal pulse width. 0(=level), 1, 25, 30, 125, 150, 5000 or 6000 ms" " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")"); static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN; module_param(f71862fg_pin, uint, 0); MODULE_PARM_DESC(f71862fg_pin, "Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63" " (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")"); static bool nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, bool, 0444); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); static unsigned int start_withtimeout; module_param(start_withtimeout, uint, 0); MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with" " given initial timeout. Zero (default) disables this feature."); enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg, f81803, f81865, f81866, f81966}; static const char * const fintek_wdt_names[] = { "f71808fg", "f71858fg", "f71862fg", "f71868", "f71869", "f71882fg", "f71889fg", "f81803", "f81865", "f81866", "f81966" }; /* Super-I/O Function prototypes */ static inline int superio_inb(int base, int reg); static inline int superio_inw(int base, int reg); static inline void superio_outb(int base, int reg, u8 val); static inline void superio_set_bit(int base, int reg, int bit); static inline void superio_clear_bit(int base, int reg, int bit); static inline int superio_enter(int base); static inline void superio_select(int base, int ld); static inline void superio_exit(int base); struct fintek_wdt { struct watchdog_device wdd; unsigned short sioaddr; enum chips type; struct watchdog_info ident; u8 timer_val; /* content for the wd_time register */ char minutes_mode; u8 pulse_val; /* pulse width flag */ char pulse_mode; /* enable pulse output mode? */ }; struct fintek_wdt_pdata { enum chips type; }; /* Super I/O functions */ static inline int superio_inb(int base, int reg) { outb(reg, base); return inb(base + 1); } static int superio_inw(int base, int reg) { int val; val = superio_inb(base, reg) << 8; val |= superio_inb(base, reg + 1); return val; } static inline void superio_outb(int base, int reg, u8 val) { outb(reg, base); outb(val, base + 1); } static inline void superio_set_bit(int base, int reg, int bit) { unsigned long val = superio_inb(base, reg); __set_bit(bit, &val); superio_outb(base, reg, val); } static inline void superio_clear_bit(int base, int reg, int bit) { unsigned long val = superio_inb(base, reg); __clear_bit(bit, &val); superio_outb(base, reg, val); } static inline int superio_enter(int base) { /* Don't step on other drivers' I/O space by accident */ if (!request_muxed_region(base, 2, DRVNAME)) { pr_err("I/O address 0x%04x already in use\n", (int)base); return -EBUSY; } /* according to the datasheet the key must be sent twice! */ outb(SIO_UNLOCK_KEY, base); outb(SIO_UNLOCK_KEY, base); return 0; } static inline void superio_select(int base, int ld) { outb(SIO_REG_LDSEL, base); outb(ld, base + 1); } static inline void superio_exit(int base) { outb(SIO_LOCK_KEY, base); release_region(base, 2); } static int fintek_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout) { struct fintek_wdt *wd = watchdog_get_drvdata(wdd); if (timeout > 0xff) { wd->timer_val = DIV_ROUND_UP(timeout, 60); wd->minutes_mode = true; timeout = wd->timer_val * 60; } else { wd->timer_val = timeout; wd->minutes_mode = false; } wdd->timeout = timeout; return 0; } static int fintek_wdt_set_pulse_width(struct fintek_wdt *wd, unsigned int pw) { unsigned int t1 = 25, t2 = 125, t3 = 5000; if (wd->type == f71868) { t1 = 30; t2 = 150; t3 = 6000; } if (pw <= 1) { wd->pulse_val = 0; } else if (pw <= t1) { wd->pulse_val = 1; } else if (pw <= t2) { wd->pulse_val = 2; } else if (pw <= t3) { wd->pulse_val = 3; } else { pr_err("pulse width out of range\n"); return -EINVAL; } wd->pulse_mode = pw; return 0; } static int fintek_wdt_keepalive(struct watchdog_device *wdd) { struct fintek_wdt *wd = watchdog_get_drvdata(wdd); int err; err = superio_enter(wd->sioaddr); if (err) return err; superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT); if (wd->minutes_mode) /* select minutes for timer units */ superio_set_bit(wd->sioaddr, F71808FG_REG_WDT_CONF, F71808FG_FLAG_WD_UNIT); else /* select seconds for timer units */ superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF, F71808FG_FLAG_WD_UNIT); /* Set timer value */ superio_outb(wd->sioaddr, F71808FG_REG_WD_TIME, wd->timer_val); superio_exit(wd->sioaddr); return 0; } static int fintek_wdt_start(struct watchdog_device *wdd) { struct fintek_wdt *wd = watchdog_get_drvdata(wdd); int err; u8 tmp; /* Make sure we don't die as soon as the watchdog is enabled below */ err = fintek_wdt_keepalive(wdd); if (err) return err; err = superio_enter(wd->sioaddr); if (err) return err; superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT); /* Watchdog pin configuration */ switch (wd->type) { case f71808fg: /* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */ superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT2, 3); superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT3, 3); break; case f71862fg: if (f71862fg_pin == 63) { /* SPI must be disabled first to use this pin! */ superio_clear_bit(wd->sioaddr, SIO_REG_ROM_ADDR_SEL, 6); superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT3, 4); } else if (f71862fg_pin == 56) { superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT1, 1); } break; case f71868: case f71869: /* GPIO14 --> WDTRST# */ superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT1, 4); break; case f71882fg: /* Set pin 56 to WDTRST# */ superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT1, 1); break; case f71889fg: /* set pin 40 to WDTRST# */ superio_outb(wd->sioaddr, SIO_REG_MFUNCT3, superio_inb(wd->sioaddr, SIO_REG_MFUNCT3) & 0xcf); break; case f81803: /* Enable TSI Level register bank */ superio_clear_bit(wd->sioaddr, SIO_REG_CLOCK_SEL, 3); /* Set pin 27 to WDTRST# */ superio_outb(wd->sioaddr, SIO_REG_TSI_LEVEL_SEL, 0x5f & superio_inb(wd->sioaddr, SIO_REG_TSI_LEVEL_SEL)); break; case f81865: /* Set pin 70 to WDTRST# */ superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT3, 5); break; case f81866: case f81966: /* * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0. * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch: * BIT5: 0 -> WDTRST# * 1 -> GPIO15 */ tmp = superio_inb(wd->sioaddr, SIO_F81866_REG_PORT_SEL); tmp &= ~(BIT(3) | BIT(0)); tmp |= BIT(2); superio_outb(wd->sioaddr, SIO_F81866_REG_PORT_SEL, tmp); superio_clear_bit(wd->sioaddr, SIO_F81866_REG_GPIO1, 5); break; default: /* * 'default' label to shut up the compiler and catch * programmer errors */ err = -ENODEV; goto exit_superio; } superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT); superio_set_bit(wd->sioaddr, SIO_REG_ENABLE, 0); if (wd->type == f81865 || wd->type == f81866 || wd->type == f81966) superio_set_bit(wd->sioaddr, F81865_REG_WDO_CONF, F81865_FLAG_WDOUT_EN); else superio_set_bit(wd->sioaddr, F71808FG_REG_WDO_CONF, F71808FG_FLAG_WDOUT_EN); superio_set_bit(wd->sioaddr, F71808FG_REG_WDT_CONF, F71808FG_FLAG_WD_EN); if (wd->pulse_mode) { /* Select "pulse" output mode with given duration */ u8 wdt_conf = superio_inb(wd->sioaddr, F71808FG_REG_WDT_CONF); /* Set WD_PSWIDTH bits (1:0) */ wdt_conf = (wdt_conf & 0xfc) | (wd->pulse_val & 0x03); /* Set WD_PULSE to "pulse" mode */ wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE); superio_outb(wd->sioaddr, F71808FG_REG_WDT_CONF, wdt_conf); } else { /* Select "level" output mode */ superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF, F71808FG_FLAG_WD_PULSE); } exit_superio: superio_exit(wd->sioaddr); return err; } static int fintek_wdt_stop(struct watchdog_device *wdd) { struct fintek_wdt *wd = watchdog_get_drvdata(wdd); int err; err = superio_enter(wd->sioaddr); if (err) return err; superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT); superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF, F71808FG_FLAG_WD_EN); superio_exit(wd->sioaddr); return 0; } static bool fintek_wdt_is_running(struct fintek_wdt *wd, u8 wdt_conf) { return (superio_inb(wd->sioaddr, SIO_REG_ENABLE) & BIT(0)) && (wdt_conf & BIT(F71808FG_FLAG_WD_EN)); } static const struct watchdog_ops fintek_wdt_ops = { .owner = THIS_MODULE, .start = fintek_wdt_start, .stop = fintek_wdt_stop, .ping = fintek_wdt_keepalive, .set_timeout = fintek_wdt_set_timeout, }; static int fintek_wdt_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct fintek_wdt_pdata *pdata; struct watchdog_device *wdd; struct fintek_wdt *wd; int wdt_conf, err = 0; struct resource *res; int sioaddr; res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!res) return -ENXIO; sioaddr = res->start; wd = devm_kzalloc(dev, sizeof(*wd), GFP_KERNEL); if (!wd) return -ENOMEM; pdata = dev->platform_data; wd->type = pdata->type; wd->sioaddr = sioaddr; wd->ident.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_CARDRESET; snprintf(wd->ident.identity, sizeof(wd->ident.identity), "%s watchdog", fintek_wdt_names[wd->type]); err = superio_enter(sioaddr); if (err) return err; superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT); wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF); /* * We don't want WDTMOUT_STS to stick around till regular reboot. * Write 1 to the bit to clear it to zero. */ superio_outb(sioaddr, F71808FG_REG_WDT_CONF, wdt_conf | BIT(F71808FG_FLAG_WDTMOUT_STS)); wdd = &wd->wdd; if (fintek_wdt_is_running(wd, wdt_conf)) set_bit(WDOG_HW_RUNNING, &wdd->status); superio_exit(sioaddr); wdd->parent = dev; wdd->info = &wd->ident; wdd->ops = &fintek_wdt_ops; wdd->min_timeout = 1; wdd->max_timeout = WATCHDOG_MAX_TIMEOUT; watchdog_set_drvdata(wdd, wd); watchdog_set_nowayout(wdd, nowayout); watchdog_stop_on_unregister(wdd); watchdog_stop_on_reboot(wdd); watchdog_init_timeout(wdd, start_withtimeout ?: timeout, NULL); if (wdt_conf & BIT(F71808FG_FLAG_WDTMOUT_STS)) wdd->bootstatus = WDIOF_CARDRESET; /* * WATCHDOG_HANDLE_BOOT_ENABLED can result in keepalive being directly * called without a set_timeout before, so it needs to be done here * unconditionally. */ fintek_wdt_set_timeout(wdd, wdd->timeout); fintek_wdt_set_pulse_width(wd, pulse_width); if (start_withtimeout) { err = fintek_wdt_start(wdd); if (err) { dev_err(dev, "cannot start watchdog timer\n"); return err; } set_bit(WDOG_HW_RUNNING, &wdd->status); dev_info(dev, "watchdog started with initial timeout of %u sec\n", start_withtimeout); } return devm_watchdog_register_device(dev, wdd); } static int __init fintek_wdt_find(int sioaddr) { enum chips type; u16 devid; int err = superio_enter(sioaddr); if (err) return err; devid = superio_inw(sioaddr, SIO_REG_MANID); if (devid != SIO_FINTEK_ID) { pr_debug("Not a Fintek device\n"); err = -ENODEV; goto exit; } devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); switch (devid) { case SIO_F71808_ID: type = f71808fg; break; case SIO_F71862_ID: type = f71862fg; break; case SIO_F71868_ID: type = f71868; break; case SIO_F71869_ID: case SIO_F71869A_ID: type = f71869; break; case SIO_F71882_ID: type = f71882fg; break; case SIO_F71889_ID: type = f71889fg; break; case SIO_F71858_ID: /* Confirmed (by datasheet) not to have a watchdog. */ err = -ENODEV; goto exit; case SIO_F81803_ID: type = f81803; break; case SIO_F81865_ID: type = f81865; break; case SIO_F81866_ID: type = f81866; break; case SIO_F81966_ID: type = f81966; break; default: pr_info("Unrecognized Fintek device: %04x\n", (unsigned int)devid); err = -ENODEV; goto exit; } pr_info("Found %s watchdog chip, revision %d\n", fintek_wdt_names[type], (int)superio_inb(sioaddr, SIO_REG_DEVREV)); exit: superio_exit(sioaddr); return err ? err : type; } static struct platform_driver fintek_wdt_driver = { .probe = fintek_wdt_probe, .driver = { .name = DRVNAME, }, }; static struct platform_device *fintek_wdt_pdev; static int __init fintek_wdt_init(void) { static const unsigned short addrs[] = { 0x2e, 0x4e }; struct fintek_wdt_pdata pdata; struct resource wdt_res = {}; int ret; int i; if (f71862fg_pin != 63 && f71862fg_pin != 56) { pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin); return -EINVAL; } for (i = 0; i < ARRAY_SIZE(addrs); i++) { ret = fintek_wdt_find(addrs[i]); if (ret >= 0) break; } if (i == ARRAY_SIZE(addrs)) return ret; pdata.type = ret; ret = platform_driver_register(&fintek_wdt_driver); if (ret) return ret; wdt_res.name = "superio port"; wdt_res.flags = IORESOURCE_IO; wdt_res.start = addrs[i]; wdt_res.end = addrs[i] + 1; fintek_wdt_pdev = platform_device_register_resndata(NULL, DRVNAME, -1, &wdt_res, 1, &pdata, sizeof(pdata)); if (IS_ERR(fintek_wdt_pdev)) { platform_driver_unregister(&fintek_wdt_driver); return PTR_ERR(fintek_wdt_pdev); } return 0; } static void __exit fintek_wdt_exit(void) { platform_device_unregister(fintek_wdt_pdev); platform_driver_unregister(&fintek_wdt_driver); } MODULE_DESCRIPTION("F71808E Watchdog Driver"); MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>"); MODULE_LICENSE("GPL"); module_init(fintek_wdt_init); module_exit(fintek_wdt_exit);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1