Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Pi-Cheng Chen | 1655 | 46.76% | 5 | 10.00% |
Rex-BC Chen | 1121 | 31.68% | 6 | 12.00% |
Jia-Wei Chang | 477 | 13.48% | 10 | 20.00% |
Daniel Kurtz | 87 | 2.46% | 2 | 4.00% |
Sean Wang | 30 | 0.85% | 3 | 6.00% |
Angelo G. Del Regno | 23 | 0.65% | 2 | 4.00% |
Viresh Kumar | 20 | 0.57% | 4 | 8.00% |
Fabien Parent | 18 | 0.51% | 3 | 6.00% |
Sam Shih | 16 | 0.45% | 1 | 2.00% |
Jesse Chan | 15 | 0.42% | 1 | 2.00% |
Andrew-sh Cheng | 13 | 0.37% | 3 | 6.00% |
Wan Jiabing | 13 | 0.37% | 2 | 4.00% |
Geliang Tang | 12 | 0.34% | 1 | 2.00% |
Qinglang Miao | 10 | 0.28% | 1 | 2.00% |
Daniel Golle | 9 | 0.25% | 1 | 2.00% |
Pali Rohár | 7 | 0.20% | 1 | 2.00% |
Yang Yingliang | 6 | 0.17% | 1 | 2.00% |
Arnd Bergmann | 3 | 0.08% | 1 | 2.00% |
Amit Kucheria | 2 | 0.06% | 1 | 2.00% |
Thomas Gleixner | 2 | 0.06% | 1 | 2.00% |
Total | 3539 | 50 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2015 Linaro Ltd. * Author: Pi-Cheng Chen <pi-cheng.chen@linaro.org> */ #include <linux/clk.h> #include <linux/cpu.h> #include <linux/cpufreq.h> #include <linux/cpumask.h> #include <linux/minmax.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm_opp.h> #include <linux/regulator/consumer.h> struct mtk_cpufreq_platform_data { int min_volt_shift; int max_volt_shift; int proc_max_volt; int sram_min_volt; int sram_max_volt; bool ccifreq_supported; }; /* * The struct mtk_cpu_dvfs_info holds necessary information for doing CPU DVFS * on each CPU power/clock domain of Mediatek SoCs. Each CPU cluster in * Mediatek SoCs has two voltage inputs, Vproc and Vsram. In some cases the two * voltage inputs need to be controlled under a hardware limitation: * 100mV < Vsram - Vproc < 200mV * * When scaling the clock frequency of a CPU clock domain, the clock source * needs to be switched to another stable PLL clock temporarily until * the original PLL becomes stable at target frequency. */ struct mtk_cpu_dvfs_info { struct cpumask cpus; struct device *cpu_dev; struct device *cci_dev; struct regulator *proc_reg; struct regulator *sram_reg; struct clk *cpu_clk; struct clk *inter_clk; struct list_head list_head; int intermediate_voltage; bool need_voltage_tracking; int vproc_on_boot; int pre_vproc; /* Avoid race condition for regulators between notify and policy */ struct mutex reg_lock; struct notifier_block opp_nb; unsigned int opp_cpu; unsigned long current_freq; const struct mtk_cpufreq_platform_data *soc_data; int vtrack_max; bool ccifreq_bound; }; static struct platform_device *cpufreq_pdev; static LIST_HEAD(dvfs_info_list); static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu) { struct mtk_cpu_dvfs_info *info; list_for_each_entry(info, &dvfs_info_list, list_head) { if (cpumask_test_cpu(cpu, &info->cpus)) return info; } return NULL; } static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info, int new_vproc) { const struct mtk_cpufreq_platform_data *soc_data = info->soc_data; struct regulator *proc_reg = info->proc_reg; struct regulator *sram_reg = info->sram_reg; int pre_vproc, pre_vsram, new_vsram, vsram, vproc, ret; int retry = info->vtrack_max; pre_vproc = regulator_get_voltage(proc_reg); if (pre_vproc < 0) { dev_err(info->cpu_dev, "invalid Vproc value: %d\n", pre_vproc); return pre_vproc; } pre_vsram = regulator_get_voltage(sram_reg); if (pre_vsram < 0) { dev_err(info->cpu_dev, "invalid Vsram value: %d\n", pre_vsram); return pre_vsram; } new_vsram = clamp(new_vproc + soc_data->min_volt_shift, soc_data->sram_min_volt, soc_data->sram_max_volt); do { if (pre_vproc <= new_vproc) { vsram = clamp(pre_vproc + soc_data->max_volt_shift, soc_data->sram_min_volt, new_vsram); ret = regulator_set_voltage(sram_reg, vsram, soc_data->sram_max_volt); if (ret) return ret; if (vsram == soc_data->sram_max_volt || new_vsram == soc_data->sram_min_volt) vproc = new_vproc; else vproc = vsram - soc_data->min_volt_shift; ret = regulator_set_voltage(proc_reg, vproc, soc_data->proc_max_volt); if (ret) { regulator_set_voltage(sram_reg, pre_vsram, soc_data->sram_max_volt); return ret; } } else if (pre_vproc > new_vproc) { vproc = max(new_vproc, pre_vsram - soc_data->max_volt_shift); ret = regulator_set_voltage(proc_reg, vproc, soc_data->proc_max_volt); if (ret) return ret; if (vproc == new_vproc) vsram = new_vsram; else vsram = max(new_vsram, vproc + soc_data->min_volt_shift); ret = regulator_set_voltage(sram_reg, vsram, soc_data->sram_max_volt); if (ret) { regulator_set_voltage(proc_reg, pre_vproc, soc_data->proc_max_volt); return ret; } } pre_vproc = vproc; pre_vsram = vsram; if (--retry < 0) { dev_err(info->cpu_dev, "over loop count, failed to set voltage\n"); return -EINVAL; } } while (vproc != new_vproc || vsram != new_vsram); return 0; } static int mtk_cpufreq_set_voltage(struct mtk_cpu_dvfs_info *info, int vproc) { const struct mtk_cpufreq_platform_data *soc_data = info->soc_data; int ret; if (info->need_voltage_tracking) ret = mtk_cpufreq_voltage_tracking(info, vproc); else ret = regulator_set_voltage(info->proc_reg, vproc, soc_data->proc_max_volt); if (!ret) info->pre_vproc = vproc; return ret; } static bool is_ccifreq_ready(struct mtk_cpu_dvfs_info *info) { struct device_link *sup_link; if (info->ccifreq_bound) return true; sup_link = device_link_add(info->cpu_dev, info->cci_dev, DL_FLAG_AUTOREMOVE_CONSUMER); if (!sup_link) { dev_err(info->cpu_dev, "cpu%d: sup_link is NULL\n", info->opp_cpu); return false; } if (sup_link->supplier->links.status != DL_DEV_DRIVER_BOUND) return false; info->ccifreq_bound = true; return true; } static int mtk_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index) { struct cpufreq_frequency_table *freq_table = policy->freq_table; struct clk *cpu_clk = policy->clk; struct clk *armpll = clk_get_parent(cpu_clk); struct mtk_cpu_dvfs_info *info = policy->driver_data; struct device *cpu_dev = info->cpu_dev; struct dev_pm_opp *opp; long freq_hz, pre_freq_hz; int vproc, pre_vproc, inter_vproc, target_vproc, ret; inter_vproc = info->intermediate_voltage; pre_freq_hz = clk_get_rate(cpu_clk); mutex_lock(&info->reg_lock); if (unlikely(info->pre_vproc <= 0)) pre_vproc = regulator_get_voltage(info->proc_reg); else pre_vproc = info->pre_vproc; if (pre_vproc < 0) { dev_err(cpu_dev, "invalid Vproc value: %d\n", pre_vproc); ret = pre_vproc; goto out; } freq_hz = freq_table[index].frequency * 1000; opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); if (IS_ERR(opp)) { dev_err(cpu_dev, "cpu%d: failed to find OPP for %ld\n", policy->cpu, freq_hz); ret = PTR_ERR(opp); goto out; } vproc = dev_pm_opp_get_voltage(opp); dev_pm_opp_put(opp); /* * If MediaTek cci is supported but is not ready, we will use the value * of max(target cpu voltage, booting voltage) to prevent high freqeuncy * low voltage crash. */ if (info->soc_data->ccifreq_supported && !is_ccifreq_ready(info)) vproc = max(vproc, info->vproc_on_boot); /* * If the new voltage or the intermediate voltage is higher than the * current voltage, scale up voltage first. */ target_vproc = max(inter_vproc, vproc); if (pre_vproc <= target_vproc) { ret = mtk_cpufreq_set_voltage(info, target_vproc); if (ret) { dev_err(cpu_dev, "cpu%d: failed to scale up voltage!\n", policy->cpu); mtk_cpufreq_set_voltage(info, pre_vproc); goto out; } } /* Reparent the CPU clock to intermediate clock. */ ret = clk_set_parent(cpu_clk, info->inter_clk); if (ret) { dev_err(cpu_dev, "cpu%d: failed to re-parent cpu clock!\n", policy->cpu); mtk_cpufreq_set_voltage(info, pre_vproc); goto out; } /* Set the original PLL to target rate. */ ret = clk_set_rate(armpll, freq_hz); if (ret) { dev_err(cpu_dev, "cpu%d: failed to scale cpu clock rate!\n", policy->cpu); clk_set_parent(cpu_clk, armpll); mtk_cpufreq_set_voltage(info, pre_vproc); goto out; } /* Set parent of CPU clock back to the original PLL. */ ret = clk_set_parent(cpu_clk, armpll); if (ret) { dev_err(cpu_dev, "cpu%d: failed to re-parent cpu clock!\n", policy->cpu); mtk_cpufreq_set_voltage(info, inter_vproc); goto out; } /* * If the new voltage is lower than the intermediate voltage or the * original voltage, scale down to the new voltage. */ if (vproc < inter_vproc || vproc < pre_vproc) { ret = mtk_cpufreq_set_voltage(info, vproc); if (ret) { dev_err(cpu_dev, "cpu%d: failed to scale down voltage!\n", policy->cpu); clk_set_parent(cpu_clk, info->inter_clk); clk_set_rate(armpll, pre_freq_hz); clk_set_parent(cpu_clk, armpll); goto out; } } info->current_freq = freq_hz; out: mutex_unlock(&info->reg_lock); return ret; } static int mtk_cpufreq_opp_notifier(struct notifier_block *nb, unsigned long event, void *data) { struct dev_pm_opp *opp = data; struct dev_pm_opp *new_opp; struct mtk_cpu_dvfs_info *info; unsigned long freq, volt; struct cpufreq_policy *policy; int ret = 0; info = container_of(nb, struct mtk_cpu_dvfs_info, opp_nb); if (event == OPP_EVENT_ADJUST_VOLTAGE) { freq = dev_pm_opp_get_freq(opp); mutex_lock(&info->reg_lock); if (info->current_freq == freq) { volt = dev_pm_opp_get_voltage(opp); ret = mtk_cpufreq_set_voltage(info, volt); if (ret) dev_err(info->cpu_dev, "failed to scale voltage: %d\n", ret); } mutex_unlock(&info->reg_lock); } else if (event == OPP_EVENT_DISABLE) { freq = dev_pm_opp_get_freq(opp); /* case of current opp item is disabled */ if (info->current_freq == freq) { freq = 1; new_opp = dev_pm_opp_find_freq_ceil(info->cpu_dev, &freq); if (IS_ERR(new_opp)) { dev_err(info->cpu_dev, "all opp items are disabled\n"); ret = PTR_ERR(new_opp); return notifier_from_errno(ret); } dev_pm_opp_put(new_opp); policy = cpufreq_cpu_get(info->opp_cpu); if (policy) { cpufreq_driver_target(policy, freq / 1000, CPUFREQ_RELATION_L); cpufreq_cpu_put(policy); } } } return notifier_from_errno(ret); } static struct device *of_get_cci(struct device *cpu_dev) { struct device_node *np; struct platform_device *pdev; np = of_parse_phandle(cpu_dev->of_node, "mediatek,cci", 0); if (!np) return ERR_PTR(-ENODEV); pdev = of_find_device_by_node(np); of_node_put(np); if (!pdev) return ERR_PTR(-ENODEV); return &pdev->dev; } static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu) { struct device *cpu_dev; struct dev_pm_opp *opp; unsigned long rate; int ret; cpu_dev = get_cpu_device(cpu); if (!cpu_dev) { dev_err(cpu_dev, "failed to get cpu%d device\n", cpu); return -ENODEV; } info->cpu_dev = cpu_dev; info->ccifreq_bound = false; if (info->soc_data->ccifreq_supported) { info->cci_dev = of_get_cci(info->cpu_dev); if (IS_ERR(info->cci_dev)) { ret = PTR_ERR(info->cci_dev); dev_err(cpu_dev, "cpu%d: failed to get cci device\n", cpu); return -ENODEV; } } info->cpu_clk = clk_get(cpu_dev, "cpu"); if (IS_ERR(info->cpu_clk)) { ret = PTR_ERR(info->cpu_clk); return dev_err_probe(cpu_dev, ret, "cpu%d: failed to get cpu clk\n", cpu); } info->inter_clk = clk_get(cpu_dev, "intermediate"); if (IS_ERR(info->inter_clk)) { ret = PTR_ERR(info->inter_clk); dev_err_probe(cpu_dev, ret, "cpu%d: failed to get intermediate clk\n", cpu); goto out_free_mux_clock; } info->proc_reg = regulator_get_optional(cpu_dev, "proc"); if (IS_ERR(info->proc_reg)) { ret = PTR_ERR(info->proc_reg); dev_err_probe(cpu_dev, ret, "cpu%d: failed to get proc regulator\n", cpu); goto out_free_inter_clock; } ret = regulator_enable(info->proc_reg); if (ret) { dev_warn(cpu_dev, "cpu%d: failed to enable vproc\n", cpu); goto out_free_proc_reg; } /* Both presence and absence of sram regulator are valid cases. */ info->sram_reg = regulator_get_optional(cpu_dev, "sram"); if (IS_ERR(info->sram_reg)) { ret = PTR_ERR(info->sram_reg); if (ret == -EPROBE_DEFER) goto out_disable_proc_reg; info->sram_reg = NULL; } else { ret = regulator_enable(info->sram_reg); if (ret) { dev_warn(cpu_dev, "cpu%d: failed to enable vsram\n", cpu); goto out_free_sram_reg; } } /* Get OPP-sharing information from "operating-points-v2" bindings */ ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, &info->cpus); if (ret) { dev_err(cpu_dev, "cpu%d: failed to get OPP-sharing information\n", cpu); goto out_disable_sram_reg; } ret = dev_pm_opp_of_cpumask_add_table(&info->cpus); if (ret) { dev_warn(cpu_dev, "cpu%d: no OPP table\n", cpu); goto out_disable_sram_reg; } ret = clk_prepare_enable(info->cpu_clk); if (ret) goto out_free_opp_table; ret = clk_prepare_enable(info->inter_clk); if (ret) goto out_disable_mux_clock; if (info->soc_data->ccifreq_supported) { info->vproc_on_boot = regulator_get_voltage(info->proc_reg); if (info->vproc_on_boot < 0) { ret = info->vproc_on_boot; dev_err(info->cpu_dev, "invalid Vproc value: %d\n", info->vproc_on_boot); goto out_disable_inter_clock; } } /* Search a safe voltage for intermediate frequency. */ rate = clk_get_rate(info->inter_clk); opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate); if (IS_ERR(opp)) { dev_err(cpu_dev, "cpu%d: failed to get intermediate opp\n", cpu); ret = PTR_ERR(opp); goto out_disable_inter_clock; } info->intermediate_voltage = dev_pm_opp_get_voltage(opp); dev_pm_opp_put(opp); mutex_init(&info->reg_lock); info->current_freq = clk_get_rate(info->cpu_clk); info->opp_cpu = cpu; info->opp_nb.notifier_call = mtk_cpufreq_opp_notifier; ret = dev_pm_opp_register_notifier(cpu_dev, &info->opp_nb); if (ret) { dev_err(cpu_dev, "cpu%d: failed to register opp notifier\n", cpu); goto out_disable_inter_clock; } /* * If SRAM regulator is present, software "voltage tracking" is needed * for this CPU power domain. */ info->need_voltage_tracking = (info->sram_reg != NULL); /* * We assume min voltage is 0 and tracking target voltage using * min_volt_shift for each iteration. * The vtrack_max is 3 times of expeted iteration count. */ info->vtrack_max = 3 * DIV_ROUND_UP(max(info->soc_data->sram_max_volt, info->soc_data->proc_max_volt), info->soc_data->min_volt_shift); return 0; out_disable_inter_clock: clk_disable_unprepare(info->inter_clk); out_disable_mux_clock: clk_disable_unprepare(info->cpu_clk); out_free_opp_table: dev_pm_opp_of_cpumask_remove_table(&info->cpus); out_disable_sram_reg: if (info->sram_reg) regulator_disable(info->sram_reg); out_free_sram_reg: if (info->sram_reg) regulator_put(info->sram_reg); out_disable_proc_reg: regulator_disable(info->proc_reg); out_free_proc_reg: regulator_put(info->proc_reg); out_free_inter_clock: clk_put(info->inter_clk); out_free_mux_clock: clk_put(info->cpu_clk); return ret; } static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info) { regulator_disable(info->proc_reg); regulator_put(info->proc_reg); if (info->sram_reg) { regulator_disable(info->sram_reg); regulator_put(info->sram_reg); } clk_disable_unprepare(info->cpu_clk); clk_put(info->cpu_clk); clk_disable_unprepare(info->inter_clk); clk_put(info->inter_clk); dev_pm_opp_of_cpumask_remove_table(&info->cpus); dev_pm_opp_unregister_notifier(info->cpu_dev, &info->opp_nb); } static int mtk_cpufreq_init(struct cpufreq_policy *policy) { struct mtk_cpu_dvfs_info *info; struct cpufreq_frequency_table *freq_table; int ret; info = mtk_cpu_dvfs_info_lookup(policy->cpu); if (!info) { pr_err("dvfs info for cpu%d is not initialized.\n", policy->cpu); return -EINVAL; } ret = dev_pm_opp_init_cpufreq_table(info->cpu_dev, &freq_table); if (ret) { dev_err(info->cpu_dev, "failed to init cpufreq table for cpu%d: %d\n", policy->cpu, ret); return ret; } cpumask_copy(policy->cpus, &info->cpus); policy->freq_table = freq_table; policy->driver_data = info; policy->clk = info->cpu_clk; return 0; } static int mtk_cpufreq_exit(struct cpufreq_policy *policy) { struct mtk_cpu_dvfs_info *info = policy->driver_data; dev_pm_opp_free_cpufreq_table(info->cpu_dev, &policy->freq_table); return 0; } static struct cpufreq_driver mtk_cpufreq_driver = { .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | CPUFREQ_HAVE_GOVERNOR_PER_POLICY | CPUFREQ_IS_COOLING_DEV, .verify = cpufreq_generic_frequency_table_verify, .target_index = mtk_cpufreq_set_target, .get = cpufreq_generic_get, .init = mtk_cpufreq_init, .exit = mtk_cpufreq_exit, .register_em = cpufreq_register_em_with_opp, .name = "mtk-cpufreq", .attr = cpufreq_generic_attr, }; static int mtk_cpufreq_probe(struct platform_device *pdev) { const struct mtk_cpufreq_platform_data *data; struct mtk_cpu_dvfs_info *info, *tmp; int cpu, ret; data = dev_get_platdata(&pdev->dev); if (!data) { dev_err(&pdev->dev, "failed to get mtk cpufreq platform data\n"); return -ENODEV; } for_each_possible_cpu(cpu) { info = mtk_cpu_dvfs_info_lookup(cpu); if (info) continue; info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (!info) { ret = -ENOMEM; goto release_dvfs_info_list; } info->soc_data = data; ret = mtk_cpu_dvfs_info_init(info, cpu); if (ret) { dev_err(&pdev->dev, "failed to initialize dvfs info for cpu%d\n", cpu); goto release_dvfs_info_list; } list_add(&info->list_head, &dvfs_info_list); } ret = cpufreq_register_driver(&mtk_cpufreq_driver); if (ret) { dev_err(&pdev->dev, "failed to register mtk cpufreq driver\n"); goto release_dvfs_info_list; } return 0; release_dvfs_info_list: list_for_each_entry_safe(info, tmp, &dvfs_info_list, list_head) { mtk_cpu_dvfs_info_release(info); list_del(&info->list_head); } return ret; } static struct platform_driver mtk_cpufreq_platdrv = { .driver = { .name = "mtk-cpufreq", }, .probe = mtk_cpufreq_probe, }; static const struct mtk_cpufreq_platform_data mt2701_platform_data = { .min_volt_shift = 100000, .max_volt_shift = 200000, .proc_max_volt = 1150000, .sram_min_volt = 0, .sram_max_volt = 1150000, .ccifreq_supported = false, }; static const struct mtk_cpufreq_platform_data mt7622_platform_data = { .min_volt_shift = 100000, .max_volt_shift = 200000, .proc_max_volt = 1350000, .sram_min_volt = 0, .sram_max_volt = 1350000, .ccifreq_supported = false, }; static const struct mtk_cpufreq_platform_data mt7623_platform_data = { .min_volt_shift = 100000, .max_volt_shift = 200000, .proc_max_volt = 1300000, .ccifreq_supported = false, }; static const struct mtk_cpufreq_platform_data mt7988_platform_data = { .min_volt_shift = 100000, .max_volt_shift = 200000, .proc_max_volt = 900000, .sram_min_volt = 0, .sram_max_volt = 1150000, .ccifreq_supported = true, }; static const struct mtk_cpufreq_platform_data mt8183_platform_data = { .min_volt_shift = 100000, .max_volt_shift = 200000, .proc_max_volt = 1150000, .sram_min_volt = 0, .sram_max_volt = 1150000, .ccifreq_supported = true, }; static const struct mtk_cpufreq_platform_data mt8186_platform_data = { .min_volt_shift = 100000, .max_volt_shift = 250000, .proc_max_volt = 1118750, .sram_min_volt = 850000, .sram_max_volt = 1118750, .ccifreq_supported = true, }; static const struct mtk_cpufreq_platform_data mt8516_platform_data = { .min_volt_shift = 100000, .max_volt_shift = 200000, .proc_max_volt = 1310000, .sram_min_volt = 0, .sram_max_volt = 1310000, .ccifreq_supported = false, }; /* List of machines supported by this driver */ static const struct of_device_id mtk_cpufreq_machines[] __initconst = { { .compatible = "mediatek,mt2701", .data = &mt2701_platform_data }, { .compatible = "mediatek,mt2712", .data = &mt2701_platform_data }, { .compatible = "mediatek,mt7622", .data = &mt7622_platform_data }, { .compatible = "mediatek,mt7623", .data = &mt7623_platform_data }, { .compatible = "mediatek,mt7988a", .data = &mt7988_platform_data }, { .compatible = "mediatek,mt8167", .data = &mt8516_platform_data }, { .compatible = "mediatek,mt817x", .data = &mt2701_platform_data }, { .compatible = "mediatek,mt8173", .data = &mt2701_platform_data }, { .compatible = "mediatek,mt8176", .data = &mt2701_platform_data }, { .compatible = "mediatek,mt8183", .data = &mt8183_platform_data }, { .compatible = "mediatek,mt8186", .data = &mt8186_platform_data }, { .compatible = "mediatek,mt8365", .data = &mt2701_platform_data }, { .compatible = "mediatek,mt8516", .data = &mt8516_platform_data }, { } }; MODULE_DEVICE_TABLE(of, mtk_cpufreq_machines); static int __init mtk_cpufreq_driver_init(void) { struct device_node *np; const struct of_device_id *match; const struct mtk_cpufreq_platform_data *data; int err; np = of_find_node_by_path("/"); if (!np) return -ENODEV; match = of_match_node(mtk_cpufreq_machines, np); of_node_put(np); if (!match) { pr_debug("Machine is not compatible with mtk-cpufreq\n"); return -ENODEV; } data = match->data; err = platform_driver_register(&mtk_cpufreq_platdrv); if (err) return err; /* * Since there's no place to hold device registration code and no * device tree based way to match cpufreq driver yet, both the driver * and the device registration codes are put here to handle defer * probing. */ cpufreq_pdev = platform_device_register_data(NULL, "mtk-cpufreq", -1, data, sizeof(*data)); if (IS_ERR(cpufreq_pdev)) { pr_err("failed to register mtk-cpufreq platform device\n"); platform_driver_unregister(&mtk_cpufreq_platdrv); return PTR_ERR(cpufreq_pdev); } return 0; } module_init(mtk_cpufreq_driver_init) static void __exit mtk_cpufreq_driver_exit(void) { platform_device_unregister(cpufreq_pdev); platform_driver_unregister(&mtk_cpufreq_platdrv); } module_exit(mtk_cpufreq_driver_exit) MODULE_DESCRIPTION("MediaTek CPUFreq driver"); MODULE_AUTHOR("Pi-Cheng Chen <pi-cheng.chen@linaro.org>"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1