| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Maxime Ripard | 3310 | 33.34% | 17 | 10.24% |
| Yakui Zhao | 1472 | 14.83% | 4 | 2.41% |
| Dave Airlie | 1099 | 11.07% | 11 | 6.63% |
| Ville Syrjälä | 1083 | 10.91% | 33 | 19.88% |
| Hans de Goede | 469 | 4.72% | 10 | 6.02% |
| Daniel Stone | 336 | 3.38% | 2 | 1.20% |
| Chris Wilson | 313 | 3.15% | 5 | 3.01% |
| Steffen Trumtrar | 312 | 3.14% | 3 | 1.81% |
| Shashank Sharma | 242 | 2.44% | 4 | 2.41% |
| Steve Longerbeam | 224 | 2.26% | 1 | 0.60% |
| Noralf Trönnes | 152 | 1.53% | 2 | 1.20% |
| Daniel Vetter | 150 | 1.51% | 14 | 8.43% |
| Adam Jackson | 116 | 1.17% | 6 | 3.61% |
| Lothar Waßmann | 87 | 0.88% | 2 | 1.20% |
| Damien Lespiau | 83 | 0.84% | 4 | 2.41% |
| Eric Anholt | 47 | 0.47% | 2 | 1.20% |
| Jani Nikula | 43 | 0.43% | 2 | 1.20% |
| Javier Martinez Canillas | 37 | 0.37% | 1 | 0.60% |
| Thomas Hellstrom | 34 | 0.34% | 2 | 1.20% |
| Thomas Zimmermann | 30 | 0.30% | 3 | 1.81% |
| Rolf Eike Beer | 30 | 0.30% | 1 | 0.60% |
| Tomi Valkeinen | 29 | 0.29% | 3 | 1.81% |
| Stephan Gerhold | 28 | 0.28% | 1 | 0.60% |
| Geert Uytterhoeven | 26 | 0.26% | 1 | 0.60% |
| Peter Ujfalusi | 25 | 0.25% | 1 | 0.60% |
| Gustavo Padovan | 23 | 0.23% | 1 | 0.60% |
| Dmitry Osipenko | 22 | 0.22% | 1 | 0.60% |
| Takashi Iwai | 14 | 0.14% | 2 | 1.20% |
| Justin Stitt | 10 | 0.10% | 1 | 0.60% |
| David Chinner | 10 | 0.10% | 1 | 0.60% |
| Rob Clark | 9 | 0.09% | 2 | 1.20% |
| Benjamin Gaignard | 8 | 0.08% | 1 | 0.60% |
| Jesse Barnes | 7 | 0.07% | 1 | 0.60% |
| Gerd Hoffmann | 5 | 0.05% | 1 | 0.60% |
| Laurent Pinchart | 5 | 0.05% | 1 | 0.60% |
| Paul Gortmaker | 4 | 0.04% | 1 | 0.60% |
| Sam Ravnborg | 4 | 0.04% | 1 | 0.60% |
| Arnd Bergmann | 4 | 0.04% | 1 | 0.60% |
| Keith Packard | 4 | 0.04% | 1 | 0.60% |
| Chuhong Yuan | 3 | 0.03% | 1 | 0.60% |
| caihuoqing | 2 | 0.02% | 1 | 0.60% |
| Gustavo A. R. Silva | 2 | 0.02% | 1 | 0.60% |
| Sami Tolvanen | 2 | 0.02% | 1 | 0.60% |
| Tejun Heo | 2 | 0.02% | 1 | 0.60% |
| Mauro Carvalho Chehab | 2 | 0.02% | 1 | 0.60% |
| Francisco Jerez | 1 | 0.01% | 1 | 0.60% |
| Matt Roper | 1 | 0.01% | 1 | 0.60% |
| Linus Torvalds | 1 | 0.01% | 1 | 0.60% |
| Roel Kluin | 1 | 0.01% | 1 | 0.60% |
| Sean Paul | 1 | 0.01% | 1 | 0.60% |
| Marek Vašut | 1 | 0.01% | 1 | 0.60% |
| Yannick Guerrini | 1 | 0.01% | 1 | 0.60% |
| Thierry Reding | 1 | 0.01% | 1 | 0.60% |
| Alexander A. Klimov | 1 | 0.01% | 1 | 0.60% |
| Total | 9928 | 166 |
/* * Copyright © 1997-2003 by The XFree86 Project, Inc. * Copyright © 2007 Dave Airlie * Copyright © 2007-2008 Intel Corporation * Jesse Barnes <jesse.barnes@intel.com> * Copyright 2005-2006 Luc Verhaegen * Copyright (c) 2001, Andy Ritger aritger@nvidia.com * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Except as contained in this notice, the name of the copyright holder(s) * and author(s) shall not be used in advertising or otherwise to promote * the sale, use or other dealings in this Software without prior written * authorization from the copyright holder(s) and author(s). */ #include <linux/ctype.h> #include <linux/export.h> #include <linux/fb.h> /* for KHZ2PICOS() */ #include <linux/list.h> #include <linux/list_sort.h> #include <linux/of.h> #include <video/of_display_timing.h> #include <video/of_videomode.h> #include <video/videomode.h> #include <drm/drm_crtc.h> #include <drm/drm_device.h> #include <drm/drm_edid.h> #include <drm/drm_modes.h> #include <drm/drm_print.h> #include "drm_crtc_internal.h" /** * drm_mode_debug_printmodeline - print a mode to dmesg * @mode: mode to print * * Describe @mode using DRM_DEBUG. */ void drm_mode_debug_printmodeline(const struct drm_display_mode *mode) { DRM_DEBUG_KMS("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode)); } EXPORT_SYMBOL(drm_mode_debug_printmodeline); /** * drm_mode_create - create a new display mode * @dev: DRM device * * Create a new, cleared drm_display_mode with kzalloc, allocate an ID for it * and return it. * * Returns: * Pointer to new mode on success, NULL on error. */ struct drm_display_mode *drm_mode_create(struct drm_device *dev) { struct drm_display_mode *nmode; nmode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL); if (!nmode) return NULL; return nmode; } EXPORT_SYMBOL(drm_mode_create); /** * drm_mode_destroy - remove a mode * @dev: DRM device * @mode: mode to remove * * Release @mode's unique ID, then free it @mode structure itself using kfree. */ void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode) { if (!mode) return; kfree(mode); } EXPORT_SYMBOL(drm_mode_destroy); /** * drm_mode_probed_add - add a mode to a connector's probed_mode list * @connector: connector the new mode * @mode: mode data * * Add @mode to @connector's probed_mode list for later use. This list should * then in a second step get filtered and all the modes actually supported by * the hardware moved to the @connector's modes list. */ void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode) { WARN_ON(!mutex_is_locked(&connector->dev->mode_config.mutex)); list_add_tail(&mode->head, &connector->probed_modes); } EXPORT_SYMBOL(drm_mode_probed_add); enum drm_mode_analog { DRM_MODE_ANALOG_NTSC, /* 525 lines, 60Hz */ DRM_MODE_ANALOG_PAL, /* 625 lines, 50Hz */ }; /* * The timings come from: * - https://web.archive.org/web/20220406232708/http://www.kolumbus.fi/pami1/video/pal_ntsc.html * - https://web.archive.org/web/20220406124914/http://martin.hinner.info/vga/pal.html * - https://web.archive.org/web/20220609202433/http://www.batsocks.co.uk/readme/video_timing.htm */ #define NTSC_LINE_DURATION_NS 63556U #define NTSC_LINES_NUMBER 525 #define NTSC_HBLK_DURATION_TYP_NS 10900U #define NTSC_HBLK_DURATION_MIN_NS (NTSC_HBLK_DURATION_TYP_NS - 200) #define NTSC_HBLK_DURATION_MAX_NS (NTSC_HBLK_DURATION_TYP_NS + 200) #define NTSC_HACT_DURATION_TYP_NS (NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_TYP_NS) #define NTSC_HACT_DURATION_MIN_NS (NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MAX_NS) #define NTSC_HACT_DURATION_MAX_NS (NTSC_LINE_DURATION_NS - NTSC_HBLK_DURATION_MIN_NS) #define NTSC_HFP_DURATION_TYP_NS 1500 #define NTSC_HFP_DURATION_MIN_NS 1270 #define NTSC_HFP_DURATION_MAX_NS 2220 #define NTSC_HSLEN_DURATION_TYP_NS 4700 #define NTSC_HSLEN_DURATION_MIN_NS (NTSC_HSLEN_DURATION_TYP_NS - 100) #define NTSC_HSLEN_DURATION_MAX_NS (NTSC_HSLEN_DURATION_TYP_NS + 100) #define NTSC_HBP_DURATION_TYP_NS 4700 /* * I couldn't find the actual tolerance for the back porch, so let's * just reuse the sync length ones. */ #define NTSC_HBP_DURATION_MIN_NS (NTSC_HBP_DURATION_TYP_NS - 100) #define NTSC_HBP_DURATION_MAX_NS (NTSC_HBP_DURATION_TYP_NS + 100) #define PAL_LINE_DURATION_NS 64000U #define PAL_LINES_NUMBER 625 #define PAL_HACT_DURATION_TYP_NS 51950U #define PAL_HACT_DURATION_MIN_NS (PAL_HACT_DURATION_TYP_NS - 100) #define PAL_HACT_DURATION_MAX_NS (PAL_HACT_DURATION_TYP_NS + 400) #define PAL_HBLK_DURATION_TYP_NS (PAL_LINE_DURATION_NS - PAL_HACT_DURATION_TYP_NS) #define PAL_HBLK_DURATION_MIN_NS (PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MAX_NS) #define PAL_HBLK_DURATION_MAX_NS (PAL_LINE_DURATION_NS - PAL_HACT_DURATION_MIN_NS) #define PAL_HFP_DURATION_TYP_NS 1650 #define PAL_HFP_DURATION_MIN_NS (PAL_HFP_DURATION_TYP_NS - 100) #define PAL_HFP_DURATION_MAX_NS (PAL_HFP_DURATION_TYP_NS + 400) #define PAL_HSLEN_DURATION_TYP_NS 4700 #define PAL_HSLEN_DURATION_MIN_NS (PAL_HSLEN_DURATION_TYP_NS - 200) #define PAL_HSLEN_DURATION_MAX_NS (PAL_HSLEN_DURATION_TYP_NS + 200) #define PAL_HBP_DURATION_TYP_NS 5700 #define PAL_HBP_DURATION_MIN_NS (PAL_HBP_DURATION_TYP_NS - 200) #define PAL_HBP_DURATION_MAX_NS (PAL_HBP_DURATION_TYP_NS + 200) struct analog_param_field { unsigned int even, odd; }; #define PARAM_FIELD(_odd, _even) \ { .even = _even, .odd = _odd } struct analog_param_range { unsigned int min, typ, max; }; #define PARAM_RANGE(_min, _typ, _max) \ { .min = _min, .typ = _typ, .max = _max } struct analog_parameters { unsigned int num_lines; unsigned int line_duration_ns; struct analog_param_range hact_ns; struct analog_param_range hfp_ns; struct analog_param_range hslen_ns; struct analog_param_range hbp_ns; struct analog_param_range hblk_ns; unsigned int bt601_hfp; struct analog_param_field vfp_lines; struct analog_param_field vslen_lines; struct analog_param_field vbp_lines; }; #define TV_MODE_PARAMETER(_mode, _lines, _line_dur, _hact, _hfp, \ _hslen, _hbp, _hblk, _bt601_hfp, _vfp, \ _vslen, _vbp) \ [_mode] = { \ .num_lines = _lines, \ .line_duration_ns = _line_dur, \ .hact_ns = _hact, \ .hfp_ns = _hfp, \ .hslen_ns = _hslen, \ .hbp_ns = _hbp, \ .hblk_ns = _hblk, \ .bt601_hfp = _bt601_hfp, \ .vfp_lines = _vfp, \ .vslen_lines = _vslen, \ .vbp_lines = _vbp, \ } static const struct analog_parameters tv_modes_parameters[] = { TV_MODE_PARAMETER(DRM_MODE_ANALOG_NTSC, NTSC_LINES_NUMBER, NTSC_LINE_DURATION_NS, PARAM_RANGE(NTSC_HACT_DURATION_MIN_NS, NTSC_HACT_DURATION_TYP_NS, NTSC_HACT_DURATION_MAX_NS), PARAM_RANGE(NTSC_HFP_DURATION_MIN_NS, NTSC_HFP_DURATION_TYP_NS, NTSC_HFP_DURATION_MAX_NS), PARAM_RANGE(NTSC_HSLEN_DURATION_MIN_NS, NTSC_HSLEN_DURATION_TYP_NS, NTSC_HSLEN_DURATION_MAX_NS), PARAM_RANGE(NTSC_HBP_DURATION_MIN_NS, NTSC_HBP_DURATION_TYP_NS, NTSC_HBP_DURATION_MAX_NS), PARAM_RANGE(NTSC_HBLK_DURATION_MIN_NS, NTSC_HBLK_DURATION_TYP_NS, NTSC_HBLK_DURATION_MAX_NS), 16, PARAM_FIELD(3, 3), PARAM_FIELD(3, 3), PARAM_FIELD(16, 17)), TV_MODE_PARAMETER(DRM_MODE_ANALOG_PAL, PAL_LINES_NUMBER, PAL_LINE_DURATION_NS, PARAM_RANGE(PAL_HACT_DURATION_MIN_NS, PAL_HACT_DURATION_TYP_NS, PAL_HACT_DURATION_MAX_NS), PARAM_RANGE(PAL_HFP_DURATION_MIN_NS, PAL_HFP_DURATION_TYP_NS, PAL_HFP_DURATION_MAX_NS), PARAM_RANGE(PAL_HSLEN_DURATION_MIN_NS, PAL_HSLEN_DURATION_TYP_NS, PAL_HSLEN_DURATION_MAX_NS), PARAM_RANGE(PAL_HBP_DURATION_MIN_NS, PAL_HBP_DURATION_TYP_NS, PAL_HBP_DURATION_MAX_NS), PARAM_RANGE(PAL_HBLK_DURATION_MIN_NS, PAL_HBLK_DURATION_TYP_NS, PAL_HBLK_DURATION_MAX_NS), 12, /* * The front porch is actually 6 short sync * pulses for the even field, and 5 for the * odd field. Each sync takes half a life so * the odd field front porch is shorter by * half a line. * * In progressive, we're supposed to use 6 * pulses, so we're fine there */ PARAM_FIELD(3, 2), /* * The vsync length is 5 long sync pulses, * each field taking half a line. We're * shorter for both fields by half a line. * * In progressive, we're supposed to use 5 * pulses, so we're off by half * a line. * * In interlace, we're now off by half a line * for the even field and one line for the odd * field. */ PARAM_FIELD(3, 3), /* * The back porch starts with post-equalizing * pulses, consisting in 5 short sync pulses * for the even field, 4 for the odd field. In * progressive, it's 5 short syncs. * * In progressive, we thus have 2.5 lines, * plus the 0.5 line we were missing * previously, so we should use 3 lines. * * In interlace, the even field is in the * exact same case than progressive. For the * odd field, we should be using 2 lines but * we're one line short, so we'll make up for * it here by using 3. * * The entire blanking area is supposed to * take 25 lines, so we also need to account * for the rest of the blanking area that * can't be in either the front porch or sync * period. */ PARAM_FIELD(19, 20)), }; static int fill_analog_mode(struct drm_device *dev, struct drm_display_mode *mode, const struct analog_parameters *params, unsigned long pixel_clock_hz, unsigned int hactive, unsigned int vactive, bool interlace) { unsigned long pixel_duration_ns = NSEC_PER_SEC / pixel_clock_hz; unsigned int htotal, vtotal; unsigned int max_hact, hact_duration_ns; unsigned int hblk, hblk_duration_ns; unsigned int hfp, hfp_duration_ns; unsigned int hslen, hslen_duration_ns; unsigned int hbp, hbp_duration_ns; unsigned int porches, porches_duration_ns; unsigned int vfp, vfp_min; unsigned int vbp, vbp_min; unsigned int vslen; bool bt601 = false; int porches_rem; u64 result; drm_dbg_kms(dev, "Generating a %ux%u%c, %u-line mode with a %lu kHz clock\n", hactive, vactive, interlace ? 'i' : 'p', params->num_lines, pixel_clock_hz / 1000); max_hact = params->hact_ns.max / pixel_duration_ns; if (pixel_clock_hz == 13500000 && hactive > max_hact && hactive <= 720) { drm_dbg_kms(dev, "Trying to generate a BT.601 mode. Disabling checks.\n"); bt601 = true; } /* * Our pixel duration is going to be round down by the division, * so rounding up is probably going to introduce even more * deviation. */ result = (u64)params->line_duration_ns * pixel_clock_hz; do_div(result, NSEC_PER_SEC); htotal = result; drm_dbg_kms(dev, "Total Horizontal Number of Pixels: %u\n", htotal); hact_duration_ns = hactive * pixel_duration_ns; if (!bt601 && (hact_duration_ns < params->hact_ns.min || hact_duration_ns > params->hact_ns.max)) { drm_err(dev, "Invalid horizontal active area duration: %uns (min: %u, max %u)\n", hact_duration_ns, params->hact_ns.min, params->hact_ns.max); return -EINVAL; } hblk = htotal - hactive; drm_dbg_kms(dev, "Horizontal Blanking Period: %u\n", hblk); hblk_duration_ns = hblk * pixel_duration_ns; if (!bt601 && (hblk_duration_ns < params->hblk_ns.min || hblk_duration_ns > params->hblk_ns.max)) { drm_err(dev, "Invalid horizontal blanking duration: %uns (min: %u, max %u)\n", hblk_duration_ns, params->hblk_ns.min, params->hblk_ns.max); return -EINVAL; } hslen = DIV_ROUND_UP(params->hslen_ns.typ, pixel_duration_ns); drm_dbg_kms(dev, "Horizontal Sync Period: %u\n", hslen); hslen_duration_ns = hslen * pixel_duration_ns; if (!bt601 && (hslen_duration_ns < params->hslen_ns.min || hslen_duration_ns > params->hslen_ns.max)) { drm_err(dev, "Invalid horizontal sync duration: %uns (min: %u, max %u)\n", hslen_duration_ns, params->hslen_ns.min, params->hslen_ns.max); return -EINVAL; } porches = hblk - hslen; drm_dbg_kms(dev, "Remaining horizontal pixels for both porches: %u\n", porches); porches_duration_ns = porches * pixel_duration_ns; if (!bt601 && (porches_duration_ns > (params->hfp_ns.max + params->hbp_ns.max) || porches_duration_ns < (params->hfp_ns.min + params->hbp_ns.min))) { drm_err(dev, "Invalid horizontal porches duration: %uns\n", porches_duration_ns); return -EINVAL; } if (bt601) { hfp = params->bt601_hfp; } else { unsigned int hfp_min = DIV_ROUND_UP(params->hfp_ns.min, pixel_duration_ns); unsigned int hbp_min = DIV_ROUND_UP(params->hbp_ns.min, pixel_duration_ns); int porches_rem = porches - hfp_min - hbp_min; hfp = hfp_min + DIV_ROUND_UP(porches_rem, 2); } drm_dbg_kms(dev, "Horizontal Front Porch: %u\n", hfp); hfp_duration_ns = hfp * pixel_duration_ns; if (!bt601 && (hfp_duration_ns < params->hfp_ns.min || hfp_duration_ns > params->hfp_ns.max)) { drm_err(dev, "Invalid horizontal front porch duration: %uns (min: %u, max %u)\n", hfp_duration_ns, params->hfp_ns.min, params->hfp_ns.max); return -EINVAL; } hbp = porches - hfp; drm_dbg_kms(dev, "Horizontal Back Porch: %u\n", hbp); hbp_duration_ns = hbp * pixel_duration_ns; if (!bt601 && (hbp_duration_ns < params->hbp_ns.min || hbp_duration_ns > params->hbp_ns.max)) { drm_err(dev, "Invalid horizontal back porch duration: %uns (min: %u, max %u)\n", hbp_duration_ns, params->hbp_ns.min, params->hbp_ns.max); return -EINVAL; } if (htotal != (hactive + hfp + hslen + hbp)) return -EINVAL; mode->clock = pixel_clock_hz / 1000; mode->hdisplay = hactive; mode->hsync_start = mode->hdisplay + hfp; mode->hsync_end = mode->hsync_start + hslen; mode->htotal = mode->hsync_end + hbp; if (interlace) { vfp_min = params->vfp_lines.even + params->vfp_lines.odd; vbp_min = params->vbp_lines.even + params->vbp_lines.odd; vslen = params->vslen_lines.even + params->vslen_lines.odd; } else { /* * By convention, NTSC (aka 525/60) systems start with * the even field, but PAL (aka 625/50) systems start * with the odd one. * * PAL systems also have asymmetric timings between the * even and odd field, while NTSC is symmetric. * * Moreover, if we want to create a progressive mode for * PAL, we need to use the odd field timings. * * Since odd == even for NTSC, we can just use the odd * one all the time to simplify the code a bit. */ vfp_min = params->vfp_lines.odd; vbp_min = params->vbp_lines.odd; vslen = params->vslen_lines.odd; } drm_dbg_kms(dev, "Vertical Sync Period: %u\n", vslen); porches = params->num_lines - vactive - vslen; drm_dbg_kms(dev, "Remaining vertical pixels for both porches: %u\n", porches); porches_rem = porches - vfp_min - vbp_min; vfp = vfp_min + (porches_rem / 2); drm_dbg_kms(dev, "Vertical Front Porch: %u\n", vfp); vbp = porches - vfp; drm_dbg_kms(dev, "Vertical Back Porch: %u\n", vbp); vtotal = vactive + vfp + vslen + vbp; if (params->num_lines != vtotal) { drm_err(dev, "Invalid vertical total: %upx (expected %upx)\n", vtotal, params->num_lines); return -EINVAL; } mode->vdisplay = vactive; mode->vsync_start = mode->vdisplay + vfp; mode->vsync_end = mode->vsync_start + vslen; mode->vtotal = mode->vsync_end + vbp; if (mode->vtotal != params->num_lines) return -EINVAL; mode->type = DRM_MODE_TYPE_DRIVER; mode->flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC; if (interlace) mode->flags |= DRM_MODE_FLAG_INTERLACE; drm_mode_set_name(mode); drm_dbg_kms(dev, "Generated mode " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode)); return 0; } /** * drm_analog_tv_mode - create a display mode for an analog TV * @dev: drm device * @tv_mode: TV Mode standard to create a mode for. See DRM_MODE_TV_MODE_*. * @pixel_clock_hz: Pixel Clock Frequency, in Hertz * @hdisplay: hdisplay size * @vdisplay: vdisplay size * @interlace: whether to compute an interlaced mode * * This function creates a struct drm_display_mode instance suited for * an analog TV output, for one of the usual analog TV mode. * * Note that @hdisplay is larger than the usual constraints for the PAL * and NTSC timings, and we'll choose to ignore most timings constraints * to reach those resolutions. * * Returns: * * A pointer to the mode, allocated with drm_mode_create(). Returns NULL * on error. */ struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev, enum drm_connector_tv_mode tv_mode, unsigned long pixel_clock_hz, unsigned int hdisplay, unsigned int vdisplay, bool interlace) { struct drm_display_mode *mode; enum drm_mode_analog analog; int ret; switch (tv_mode) { case DRM_MODE_TV_MODE_NTSC: fallthrough; case DRM_MODE_TV_MODE_NTSC_443: fallthrough; case DRM_MODE_TV_MODE_NTSC_J: fallthrough; case DRM_MODE_TV_MODE_PAL_M: analog = DRM_MODE_ANALOG_NTSC; break; case DRM_MODE_TV_MODE_PAL: fallthrough; case DRM_MODE_TV_MODE_PAL_N: fallthrough; case DRM_MODE_TV_MODE_SECAM: analog = DRM_MODE_ANALOG_PAL; break; default: return NULL; } mode = drm_mode_create(dev); if (!mode) return NULL; ret = fill_analog_mode(dev, mode, &tv_modes_parameters[analog], pixel_clock_hz, hdisplay, vdisplay, interlace); if (ret) goto err_free_mode; return mode; err_free_mode: drm_mode_destroy(dev, mode); return NULL; } EXPORT_SYMBOL(drm_analog_tv_mode); /** * drm_cvt_mode -create a modeline based on the CVT algorithm * @dev: drm device * @hdisplay: hdisplay size * @vdisplay: vdisplay size * @vrefresh: vrefresh rate * @reduced: whether to use reduced blanking * @interlaced: whether to compute an interlaced mode * @margins: whether to add margins (borders) * * This function is called to generate the modeline based on CVT algorithm * according to the hdisplay, vdisplay, vrefresh. * It is based from the VESA(TM) Coordinated Video Timing Generator by * Graham Loveridge April 9, 2003 available at * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls * * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. * What I have done is to translate it by using integer calculation. * * Returns: * The modeline based on the CVT algorithm stored in a drm_display_mode object. * The display mode object is allocated with drm_mode_create(). Returns NULL * when no mode could be allocated. */ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, bool reduced, bool interlaced, bool margins) { #define HV_FACTOR 1000 /* 1) top/bottom margin size (% of height) - default: 1.8, */ #define CVT_MARGIN_PERCENTAGE 18 /* 2) character cell horizontal granularity (pixels) - default 8 */ #define CVT_H_GRANULARITY 8 /* 3) Minimum vertical porch (lines) - default 3 */ #define CVT_MIN_V_PORCH 3 /* 4) Minimum number of vertical back porch lines - default 6 */ #define CVT_MIN_V_BPORCH 6 /* Pixel Clock step (kHz) */ #define CVT_CLOCK_STEP 250 struct drm_display_mode *drm_mode; unsigned int vfieldrate, hperiod; int hdisplay_rnd, hmargin, vdisplay_rnd, vmargin, vsync; int interlace; u64 tmp; if (!hdisplay || !vdisplay) return NULL; /* allocate the drm_display_mode structure. If failure, we will * return directly */ drm_mode = drm_mode_create(dev); if (!drm_mode) return NULL; /* the CVT default refresh rate is 60Hz */ if (!vrefresh) vrefresh = 60; /* the required field fresh rate */ if (interlaced) vfieldrate = vrefresh * 2; else vfieldrate = vrefresh; /* horizontal pixels */ hdisplay_rnd = hdisplay - (hdisplay % CVT_H_GRANULARITY); /* determine the left&right borders */ hmargin = 0; if (margins) { hmargin = hdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000; hmargin -= hmargin % CVT_H_GRANULARITY; } /* find the total active pixels */ drm_mode->hdisplay = hdisplay_rnd + 2 * hmargin; /* find the number of lines per field */ if (interlaced) vdisplay_rnd = vdisplay / 2; else vdisplay_rnd = vdisplay; /* find the top & bottom borders */ vmargin = 0; if (margins) vmargin = vdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000; drm_mode->vdisplay = vdisplay + 2 * vmargin; /* Interlaced */ if (interlaced) interlace = 1; else interlace = 0; /* Determine VSync Width from aspect ratio */ if (!(vdisplay % 3) && ((vdisplay * 4 / 3) == hdisplay)) vsync = 4; else if (!(vdisplay % 9) && ((vdisplay * 16 / 9) == hdisplay)) vsync = 5; else if (!(vdisplay % 10) && ((vdisplay * 16 / 10) == hdisplay)) vsync = 6; else if (!(vdisplay % 4) && ((vdisplay * 5 / 4) == hdisplay)) vsync = 7; else if (!(vdisplay % 9) && ((vdisplay * 15 / 9) == hdisplay)) vsync = 7; else /* custom */ vsync = 10; if (!reduced) { /* simplify the GTF calculation */ /* 4) Minimum time of vertical sync + back porch interval (µs) * default 550.0 */ int tmp1, tmp2; #define CVT_MIN_VSYNC_BP 550 /* 3) Nominal HSync width (% of line period) - default 8 */ #define CVT_HSYNC_PERCENTAGE 8 unsigned int hblank_percentage; int vsyncandback_porch, __maybe_unused vback_porch, hblank; /* estimated the horizontal period */ tmp1 = HV_FACTOR * 1000000 - CVT_MIN_VSYNC_BP * HV_FACTOR * vfieldrate; tmp2 = (vdisplay_rnd + 2 * vmargin + CVT_MIN_V_PORCH) * 2 + interlace; hperiod = tmp1 * 2 / (tmp2 * vfieldrate); tmp1 = CVT_MIN_VSYNC_BP * HV_FACTOR / hperiod + 1; /* 9. Find number of lines in sync + backporch */ if (tmp1 < (vsync + CVT_MIN_V_PORCH)) vsyncandback_porch = vsync + CVT_MIN_V_PORCH; else vsyncandback_porch = tmp1; /* 10. Find number of lines in back porch */ vback_porch = vsyncandback_porch - vsync; drm_mode->vtotal = vdisplay_rnd + 2 * vmargin + vsyncandback_porch + CVT_MIN_V_PORCH; /* 5) Definition of Horizontal blanking time limitation */ /* Gradient (%/kHz) - default 600 */ #define CVT_M_FACTOR 600 /* Offset (%) - default 40 */ #define CVT_C_FACTOR 40 /* Blanking time scaling factor - default 128 */ #define CVT_K_FACTOR 128 /* Scaling factor weighting - default 20 */ #define CVT_J_FACTOR 20 #define CVT_M_PRIME (CVT_M_FACTOR * CVT_K_FACTOR / 256) #define CVT_C_PRIME ((CVT_C_FACTOR - CVT_J_FACTOR) * CVT_K_FACTOR / 256 + \ CVT_J_FACTOR) /* 12. Find ideal blanking duty cycle from formula */ hblank_percentage = CVT_C_PRIME * HV_FACTOR - CVT_M_PRIME * hperiod / 1000; /* 13. Blanking time */ if (hblank_percentage < 20 * HV_FACTOR) hblank_percentage = 20 * HV_FACTOR; hblank = drm_mode->hdisplay * hblank_percentage / (100 * HV_FACTOR - hblank_percentage); hblank -= hblank % (2 * CVT_H_GRANULARITY); /* 14. find the total pixels per line */ drm_mode->htotal = drm_mode->hdisplay + hblank; drm_mode->hsync_end = drm_mode->hdisplay + hblank / 2; drm_mode->hsync_start = drm_mode->hsync_end - (drm_mode->htotal * CVT_HSYNC_PERCENTAGE) / 100; drm_mode->hsync_start += CVT_H_GRANULARITY - drm_mode->hsync_start % CVT_H_GRANULARITY; /* fill the Vsync values */ drm_mode->vsync_start = drm_mode->vdisplay + CVT_MIN_V_PORCH; drm_mode->vsync_end = drm_mode->vsync_start + vsync; } else { /* Reduced blanking */ /* Minimum vertical blanking interval time (µs)- default 460 */ #define CVT_RB_MIN_VBLANK 460 /* Fixed number of clocks for horizontal sync */ #define CVT_RB_H_SYNC 32 /* Fixed number of clocks for horizontal blanking */ #define CVT_RB_H_BLANK 160 /* Fixed number of lines for vertical front porch - default 3*/ #define CVT_RB_VFPORCH 3 int vbilines; int tmp1, tmp2; /* 8. Estimate Horizontal period. */ tmp1 = HV_FACTOR * 1000000 - CVT_RB_MIN_VBLANK * HV_FACTOR * vfieldrate; tmp2 = vdisplay_rnd + 2 * vmargin; hperiod = tmp1 / (tmp2 * vfieldrate); /* 9. Find number of lines in vertical blanking */ vbilines = CVT_RB_MIN_VBLANK * HV_FACTOR / hperiod + 1; /* 10. Check if vertical blanking is sufficient */ if (vbilines < (CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH)) vbilines = CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH; /* 11. Find total number of lines in vertical field */ drm_mode->vtotal = vdisplay_rnd + 2 * vmargin + vbilines; /* 12. Find total number of pixels in a line */ drm_mode->htotal = drm_mode->hdisplay + CVT_RB_H_BLANK; /* Fill in HSync values */ drm_mode->hsync_end = drm_mode->hdisplay + CVT_RB_H_BLANK / 2; drm_mode->hsync_start = drm_mode->hsync_end - CVT_RB_H_SYNC; /* Fill in VSync values */ drm_mode->vsync_start = drm_mode->vdisplay + CVT_RB_VFPORCH; drm_mode->vsync_end = drm_mode->vsync_start + vsync; } /* 15/13. Find pixel clock frequency (kHz for xf86) */ tmp = drm_mode->htotal; /* perform intermediate calcs in u64 */ tmp *= HV_FACTOR * 1000; do_div(tmp, hperiod); tmp -= drm_mode->clock % CVT_CLOCK_STEP; drm_mode->clock = tmp; /* 18/16. Find actual vertical frame frequency */ /* ignore - just set the mode flag for interlaced */ if (interlaced) { drm_mode->vtotal *= 2; drm_mode->flags |= DRM_MODE_FLAG_INTERLACE; } /* Fill the mode line name */ drm_mode_set_name(drm_mode); if (reduced) drm_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC); else drm_mode->flags |= (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NHSYNC); return drm_mode; } EXPORT_SYMBOL(drm_cvt_mode); /** * drm_gtf_mode_complex - create the modeline based on the full GTF algorithm * @dev: drm device * @hdisplay: hdisplay size * @vdisplay: vdisplay size * @vrefresh: vrefresh rate. * @interlaced: whether to compute an interlaced mode * @margins: desired margin (borders) size * @GTF_M: extended GTF formula parameters * @GTF_2C: extended GTF formula parameters * @GTF_K: extended GTF formula parameters * @GTF_2J: extended GTF formula parameters * * GTF feature blocks specify C and J in multiples of 0.5, so we pass them * in here multiplied by two. For a C of 40, pass in 80. * * Returns: * The modeline based on the full GTF algorithm stored in a drm_display_mode object. * The display mode object is allocated with drm_mode_create(). Returns NULL * when no mode could be allocated. */ struct drm_display_mode * drm_gtf_mode_complex(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, bool interlaced, int margins, int GTF_M, int GTF_2C, int GTF_K, int GTF_2J) { /* 1) top/bottom margin size (% of height) - default: 1.8, */ #define GTF_MARGIN_PERCENTAGE 18 /* 2) character cell horizontal granularity (pixels) - default 8 */ #define GTF_CELL_GRAN 8 /* 3) Minimum vertical porch (lines) - default 3 */ #define GTF_MIN_V_PORCH 1 /* width of vsync in lines */ #define V_SYNC_RQD 3 /* width of hsync as % of total line */ #define H_SYNC_PERCENT 8 /* min time of vsync + back porch (microsec) */ #define MIN_VSYNC_PLUS_BP 550 /* C' and M' are part of the Blanking Duty Cycle computation */ #define GTF_C_PRIME ((((GTF_2C - GTF_2J) * GTF_K / 256) + GTF_2J) / 2) #define GTF_M_PRIME (GTF_K * GTF_M / 256) struct drm_display_mode *drm_mode; unsigned int hdisplay_rnd, vdisplay_rnd, vfieldrate_rqd; int top_margin, bottom_margin; int interlace; unsigned int hfreq_est; int vsync_plus_bp, __maybe_unused vback_porch; unsigned int vtotal_lines, __maybe_unused vfieldrate_est; unsigned int __maybe_unused hperiod; unsigned int vfield_rate, __maybe_unused vframe_rate; int left_margin, right_margin; unsigned int total_active_pixels, ideal_duty_cycle; unsigned int hblank, total_pixels, pixel_freq; int hsync, hfront_porch, vodd_front_porch_lines; unsigned int tmp1, tmp2; if (!hdisplay || !vdisplay) return NULL; drm_mode = drm_mode_create(dev); if (!drm_mode) return NULL; /* 1. In order to give correct results, the number of horizontal * pixels requested is first processed to ensure that it is divisible * by the character size, by rounding it to the nearest character * cell boundary: */ hdisplay_rnd = (hdisplay + GTF_CELL_GRAN / 2) / GTF_CELL_GRAN; hdisplay_rnd = hdisplay_rnd * GTF_CELL_GRAN; /* 2. If interlace is requested, the number of vertical lines assumed * by the calculation must be halved, as the computation calculates * the number of vertical lines per field. */ if (interlaced) vdisplay_rnd = vdisplay / 2; else vdisplay_rnd = vdisplay; /* 3. Find the frame rate required: */ if (interlaced) vfieldrate_rqd = vrefresh * 2; else vfieldrate_rqd = vrefresh; /* 4. Find number of lines in Top margin: */ top_margin = 0; if (margins) top_margin = (vdisplay_rnd * GTF_MARGIN_PERCENTAGE + 500) / 1000; /* 5. Find number of lines in bottom margin: */ bottom_margin = top_margin; /* 6. If interlace is required, then set variable interlace: */ if (interlaced) interlace = 1; else interlace = 0; /* 7. Estimate the Horizontal frequency */ { tmp1 = (1000000 - MIN_VSYNC_PLUS_BP * vfieldrate_rqd) / 500; tmp2 = (vdisplay_rnd + 2 * top_margin + GTF_MIN_V_PORCH) * 2 + interlace; hfreq_est = (tmp2 * 1000 * vfieldrate_rqd) / tmp1; } /* 8. Find the number of lines in V sync + back porch */ /* [V SYNC+BP] = RINT(([MIN VSYNC+BP] * hfreq_est / 1000000)) */ vsync_plus_bp = MIN_VSYNC_PLUS_BP * hfreq_est / 1000; vsync_plus_bp = (vsync_plus_bp + 500) / 1000; /* 9. Find the number of lines in V back porch alone: */ vback_porch = vsync_plus_bp - V_SYNC_RQD; /* 10. Find the total number of lines in Vertical field period: */ vtotal_lines = vdisplay_rnd + top_margin + bottom_margin + vsync_plus_bp + GTF_MIN_V_PORCH; /* 11. Estimate the Vertical field frequency: */ vfieldrate_est = hfreq_est / vtotal_lines; /* 12. Find the actual horizontal period: */ hperiod = 1000000 / (vfieldrate_rqd * vtotal_lines); /* 13. Find the actual Vertical field frequency: */ vfield_rate = hfreq_est / vtotal_lines; /* 14. Find the Vertical frame frequency: */ if (interlaced) vframe_rate = vfield_rate / 2; else vframe_rate = vfield_rate; /* 15. Find number of pixels in left margin: */ if (margins) left_margin = (hdisplay_rnd * GTF_MARGIN_PERCENTAGE + 500) / 1000; else left_margin = 0; /* 16.Find number of pixels in right margin: */ right_margin = left_margin; /* 17.Find total number of active pixels in image and left and right */ total_active_pixels = hdisplay_rnd + left_margin + right_margin; /* 18.Find the ideal blanking duty cycle from blanking duty cycle */ ideal_duty_cycle = GTF_C_PRIME * 1000 - (GTF_M_PRIME * 1000000 / hfreq_est); /* 19.Find the number of pixels in the blanking time to the nearest * double character cell: */ hblank = total_active_pixels * ideal_duty_cycle / (100000 - ideal_duty_cycle); hblank = (hblank + GTF_CELL_GRAN) / (2 * GTF_CELL_GRAN); hblank = hblank * 2 * GTF_CELL_GRAN; /* 20.Find total number of pixels: */ total_pixels = total_active_pixels + hblank; /* 21.Find pixel clock frequency: */ pixel_freq = total_pixels * hfreq_est / 1000; /* Stage 1 computations are now complete; I should really pass * the results to another function and do the Stage 2 computations, * but I only need a few more values so I'll just append the * computations here for now */ /* 17. Find the number of pixels in the horizontal sync period: */ hsync = H_SYNC_PERCENT * total_pixels / 100; hsync = (hsync + GTF_CELL_GRAN / 2) / GTF_CELL_GRAN; hsync = hsync * GTF_CELL_GRAN; /* 18. Find the number of pixels in horizontal front porch period */ hfront_porch = hblank / 2 - hsync; /* 36. Find the number of lines in the odd front porch period: */ vodd_front_porch_lines = GTF_MIN_V_PORCH ; /* finally, pack the results in the mode struct */ drm_mode->hdisplay = hdisplay_rnd; drm_mode->hsync_start = hdisplay_rnd + hfront_porch; drm_mode->hsync_end = drm_mode->hsync_start + hsync; drm_mode->htotal = total_pixels; drm_mode->vdisplay = vdisplay_rnd; drm_mode->vsync_start = vdisplay_rnd + vodd_front_porch_lines; drm_mode->vsync_end = drm_mode->vsync_start + V_SYNC_RQD; drm_mode->vtotal = vtotal_lines; drm_mode->clock = pixel_freq; if (interlaced) { drm_mode->vtotal *= 2; drm_mode->flags |= DRM_MODE_FLAG_INTERLACE; } drm_mode_set_name(drm_mode); if (GTF_M == 600 && GTF_2C == 80 && GTF_K == 128 && GTF_2J == 40) drm_mode->flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC; else drm_mode->flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC; return drm_mode; } EXPORT_SYMBOL(drm_gtf_mode_complex); /** * drm_gtf_mode - create the modeline based on the GTF algorithm * @dev: drm device * @hdisplay: hdisplay size * @vdisplay: vdisplay size * @vrefresh: vrefresh rate. * @interlaced: whether to compute an interlaced mode * @margins: desired margin (borders) size * * return the modeline based on GTF algorithm * * This function is to create the modeline based on the GTF algorithm. * Generalized Timing Formula is derived from: * * GTF Spreadsheet by Andy Morrish (1/5/97) * available at https://www.vesa.org * * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c. * What I have done is to translate it by using integer calculation. * I also refer to the function of fb_get_mode in the file of * drivers/video/fbmon.c * * Standard GTF parameters:: * * M = 600 * C = 40 * K = 128 * J = 20 * * Returns: * The modeline based on the GTF algorithm stored in a drm_display_mode object. * The display mode object is allocated with drm_mode_create(). Returns NULL * when no mode could be allocated. */ struct drm_display_mode * drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, bool interlaced, int margins) { return drm_gtf_mode_complex(dev, hdisplay, vdisplay, vrefresh, interlaced, margins, 600, 40 * 2, 128, 20 * 2); } EXPORT_SYMBOL(drm_gtf_mode); #ifdef CONFIG_VIDEOMODE_HELPERS /** * drm_display_mode_from_videomode - fill in @dmode using @vm, * @vm: videomode structure to use as source * @dmode: drm_display_mode structure to use as destination * * Fills out @dmode using the display mode specified in @vm. */ void drm_display_mode_from_videomode(const struct videomode *vm, struct drm_display_mode *dmode) { dmode->hdisplay = vm->hactive; dmode->hsync_start = dmode->hdisplay + vm->hfront_porch; dmode->hsync_end = dmode->hsync_start + vm->hsync_len; dmode->htotal = dmode->hsync_end + vm->hback_porch; dmode->vdisplay = vm->vactive; dmode->vsync_start = dmode->vdisplay + vm->vfront_porch; dmode->vsync_end = dmode->vsync_start + vm->vsync_len; dmode->vtotal = dmode->vsync_end + vm->vback_porch; dmode->clock = vm->pixelclock / 1000; dmode->flags = 0; if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH) dmode->flags |= DRM_MODE_FLAG_PHSYNC; else if (vm->flags & DISPLAY_FLAGS_HSYNC_LOW) dmode->flags |= DRM_MODE_FLAG_NHSYNC; if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH) dmode->flags |= DRM_MODE_FLAG_PVSYNC; else if (vm->flags & DISPLAY_FLAGS_VSYNC_LOW) dmode->flags |= DRM_MODE_FLAG_NVSYNC; if (vm->flags & DISPLAY_FLAGS_INTERLACED) dmode->flags |= DRM_MODE_FLAG_INTERLACE; if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN) dmode->flags |= DRM_MODE_FLAG_DBLSCAN; if (vm->flags & DISPLAY_FLAGS_DOUBLECLK) dmode->flags |= DRM_MODE_FLAG_DBLCLK; drm_mode_set_name(dmode); } EXPORT_SYMBOL_GPL(drm_display_mode_from_videomode); /** * drm_display_mode_to_videomode - fill in @vm using @dmode, * @dmode: drm_display_mode structure to use as source * @vm: videomode structure to use as destination * * Fills out @vm using the display mode specified in @dmode. */ void drm_display_mode_to_videomode(const struct drm_display_mode *dmode, struct videomode *vm) { vm->hactive = dmode->hdisplay; vm->hfront_porch = dmode->hsync_start - dmode->hdisplay; vm->hsync_len = dmode->hsync_end - dmode->hsync_start; vm->hback_porch = dmode->htotal - dmode->hsync_end; vm->vactive = dmode->vdisplay; vm->vfront_porch = dmode->vsync_start - dmode->vdisplay; vm->vsync_len = dmode->vsync_end - dmode->vsync_start; vm->vback_porch = dmode->vtotal - dmode->vsync_end; vm->pixelclock = dmode->clock * 1000; vm->flags = 0; if (dmode->flags & DRM_MODE_FLAG_PHSYNC) vm->flags |= DISPLAY_FLAGS_HSYNC_HIGH; else if (dmode->flags & DRM_MODE_FLAG_NHSYNC) vm->flags |= DISPLAY_FLAGS_HSYNC_LOW; if (dmode->flags & DRM_MODE_FLAG_PVSYNC) vm->flags |= DISPLAY_FLAGS_VSYNC_HIGH; else if (dmode->flags & DRM_MODE_FLAG_NVSYNC) vm->flags |= DISPLAY_FLAGS_VSYNC_LOW; if (dmode->flags & DRM_MODE_FLAG_INTERLACE) vm->flags |= DISPLAY_FLAGS_INTERLACED; if (dmode->flags & DRM_MODE_FLAG_DBLSCAN) vm->flags |= DISPLAY_FLAGS_DOUBLESCAN; if (dmode->flags & DRM_MODE_FLAG_DBLCLK) vm->flags |= DISPLAY_FLAGS_DOUBLECLK; } EXPORT_SYMBOL_GPL(drm_display_mode_to_videomode); /** * drm_bus_flags_from_videomode - extract information about pixelclk and * DE polarity from videomode and store it in a separate variable * @vm: videomode structure to use * @bus_flags: information about pixelclk, sync and DE polarity will be stored * here * * Sets DRM_BUS_FLAG_DE_(LOW|HIGH), DRM_BUS_FLAG_PIXDATA_DRIVE_(POS|NEG)EDGE * and DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in @bus_flags according to DISPLAY_FLAGS * found in @vm */ void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags) { *bus_flags = 0; if (vm->flags & DISPLAY_FLAGS_PIXDATA_POSEDGE) *bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE; if (vm->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) *bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE; if (vm->flags & DISPLAY_FLAGS_SYNC_POSEDGE) *bus_flags |= DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE; if (vm->flags & DISPLAY_FLAGS_SYNC_NEGEDGE) *bus_flags |= DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE; if (vm->flags & DISPLAY_FLAGS_DE_LOW) *bus_flags |= DRM_BUS_FLAG_DE_LOW; if (vm->flags & DISPLAY_FLAGS_DE_HIGH) *bus_flags |= DRM_BUS_FLAG_DE_HIGH; } EXPORT_SYMBOL_GPL(drm_bus_flags_from_videomode); #ifdef CONFIG_OF /** * of_get_drm_display_mode - get a drm_display_mode from devicetree * @np: device_node with the timing specification * @dmode: will be set to the return value * @bus_flags: information about pixelclk, sync and DE polarity * @index: index into the list of display timings in devicetree * * This function is expensive and should only be used, if only one mode is to be * read from DT. To get multiple modes start with of_get_display_timings and * work with that instead. * * Returns: * 0 on success, a negative errno code when no of videomode node was found. */ int of_get_drm_display_mode(struct device_node *np, struct drm_display_mode *dmode, u32 *bus_flags, int index) { struct videomode vm; int ret; ret = of_get_videomode(np, &vm, index); if (ret) return ret; drm_display_mode_from_videomode(&vm, dmode); if (bus_flags) drm_bus_flags_from_videomode(&vm, bus_flags); pr_debug("%pOF: got %dx%d display mode: " DRM_MODE_FMT "\n", np, vm.hactive, vm.vactive, DRM_MODE_ARG(dmode)); return 0; } EXPORT_SYMBOL_GPL(of_get_drm_display_mode); /** * of_get_drm_panel_display_mode - get a panel-timing drm_display_mode from devicetree * @np: device_node with the panel-timing specification * @dmode: will be set to the return value * @bus_flags: information about pixelclk, sync and DE polarity * * The mandatory Device Tree properties width-mm and height-mm * are read and set on the display mode. * * Returns: * Zero on success, negative error code on failure. */ int of_get_drm_panel_display_mode(struct device_node *np, struct drm_display_mode *dmode, u32 *bus_flags) { u32 width_mm = 0, height_mm = 0; struct display_timing timing; struct videomode vm; int ret; ret = of_get_display_timing(np, "panel-timing", &timing); if (ret) return ret; videomode_from_timing(&timing, &vm); memset(dmode, 0, sizeof(*dmode)); drm_display_mode_from_videomode(&vm, dmode); if (bus_flags) drm_bus_flags_from_videomode(&vm, bus_flags); ret = of_property_read_u32(np, "width-mm", &width_mm); if (ret) return ret; ret = of_property_read_u32(np, "height-mm", &height_mm); if (ret) return ret; dmode->width_mm = width_mm; dmode->height_mm = height_mm; pr_debug(DRM_MODE_FMT "\n", DRM_MODE_ARG(dmode)); return 0; } EXPORT_SYMBOL_GPL(of_get_drm_panel_display_mode); #endif /* CONFIG_OF */ #endif /* CONFIG_VIDEOMODE_HELPERS */ /** * drm_mode_set_name - set the name on a mode * @mode: name will be set in this mode * * Set the name of @mode to a standard format which is <hdisplay>x<vdisplay> * with an optional 'i' suffix for interlaced modes. */ void drm_mode_set_name(struct drm_display_mode *mode) { bool interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d%s", mode->hdisplay, mode->vdisplay, interlaced ? "i" : ""); } EXPORT_SYMBOL(drm_mode_set_name); /** * drm_mode_vrefresh - get the vrefresh of a mode * @mode: mode * * Returns: * @modes's vrefresh rate in Hz, rounded to the nearest integer. Calculates the * value first if it is not yet set. */ int drm_mode_vrefresh(const struct drm_display_mode *mode) { unsigned int num, den; if (mode->htotal == 0 || mode->vtotal == 0) return 0; num = mode->clock; den = mode->htotal * mode->vtotal; if (mode->flags & DRM_MODE_FLAG_INTERLACE) num *= 2; if (mode->flags & DRM_MODE_FLAG_DBLSCAN) den *= 2; if (mode->vscan > 1) den *= mode->vscan; return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(num, 1000), den); } EXPORT_SYMBOL(drm_mode_vrefresh); /** * drm_mode_get_hv_timing - Fetches hdisplay/vdisplay for given mode * @mode: mode to query * @hdisplay: hdisplay value to fill in * @vdisplay: vdisplay value to fill in * * The vdisplay value will be doubled if the specified mode is a stereo mode of * the appropriate layout. */ void drm_mode_get_hv_timing(const struct drm_display_mode *mode, int *hdisplay, int *vdisplay) { struct drm_display_mode adjusted; drm_mode_init(&adjusted, mode); drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY); *hdisplay = adjusted.crtc_hdisplay; *vdisplay = adjusted.crtc_vdisplay; } EXPORT_SYMBOL(drm_mode_get_hv_timing); /** * drm_mode_set_crtcinfo - set CRTC modesetting timing parameters * @p: mode * @adjust_flags: a combination of adjustment flags * * Setup the CRTC modesetting timing parameters for @p, adjusting if necessary. * * - The CRTC_INTERLACE_HALVE_V flag can be used to halve vertical timings of * interlaced modes. * - The CRTC_STEREO_DOUBLE flag can be used to compute the timings for * buffers containing two eyes (only adjust the timings when needed, eg. for * "frame packing" or "side by side full"). * - The CRTC_NO_DBLSCAN and CRTC_NO_VSCAN flags request that adjustment *not* * be performed for doublescan and vscan > 1 modes respectively. */ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags) { if (!p) return; p->crtc_clock = p->clock; p->crtc_hdisplay = p->hdisplay; p->crtc_hsync_start = p->hsync_start; p->crtc_hsync_end = p->hsync_end; p->crtc_htotal = p->htotal; p->crtc_hskew = p->hskew; p->crtc_vdisplay = p->vdisplay; p->crtc_vsync_start = p->vsync_start; p->crtc_vsync_end = p->vsync_end; p->crtc_vtotal = p->vtotal; if (p->flags & DRM_MODE_FLAG_INTERLACE) { if (adjust_flags & CRTC_INTERLACE_HALVE_V) { p->crtc_vdisplay /= 2; p->crtc_vsync_start /= 2; p->crtc_vsync_end /= 2; p->crtc_vtotal /= 2; } } if (!(adjust_flags & CRTC_NO_DBLSCAN)) { if (p->flags & DRM_MODE_FLAG_DBLSCAN) { p->crtc_vdisplay *= 2; p->crtc_vsync_start *= 2; p->crtc_vsync_end *= 2; p->crtc_vtotal *= 2; } } if (!(adjust_flags & CRTC_NO_VSCAN)) { if (p->vscan > 1) { p->crtc_vdisplay *= p->vscan; p->crtc_vsync_start *= p->vscan; p->crtc_vsync_end *= p->vscan; p->crtc_vtotal *= p->vscan; } } if (adjust_flags & CRTC_STEREO_DOUBLE) { unsigned int layout = p->flags & DRM_MODE_FLAG_3D_MASK; switch (layout) { case DRM_MODE_FLAG_3D_FRAME_PACKING: p->crtc_clock *= 2; p->crtc_vdisplay += p->crtc_vtotal; p->crtc_vsync_start += p->crtc_vtotal; p->crtc_vsync_end += p->crtc_vtotal; p->crtc_vtotal += p->crtc_vtotal; break; } } p->crtc_vblank_start = min(p->crtc_vsync_start, p->crtc_vdisplay); p->crtc_vblank_end = max(p->crtc_vsync_end, p->crtc_vtotal); p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay); p->crtc_hblank_end = max(p->crtc_hsync_end, p->crtc_htotal); } EXPORT_SYMBOL(drm_mode_set_crtcinfo); /** * drm_mode_copy - copy the mode * @dst: mode to overwrite * @src: mode to copy * * Copy an existing mode into another mode, preserving the * list head of the destination mode. */ void drm_mode_copy(struct drm_display_mode *dst, const struct drm_display_mode *src) { struct list_head head = dst->head; *dst = *src; dst->head = head; } EXPORT_SYMBOL(drm_mode_copy); /** * drm_mode_init - initialize the mode from another mode * @dst: mode to overwrite * @src: mode to copy * * Copy an existing mode into another mode, zeroing the * list head of the destination mode. Typically used * to guarantee the list head is not left with stack * garbage in on-stack modes. */ void drm_mode_init(struct drm_display_mode *dst, const struct drm_display_mode *src) { memset(dst, 0, sizeof(*dst)); drm_mode_copy(dst, src); } EXPORT_SYMBOL(drm_mode_init); /** * drm_mode_duplicate - allocate and duplicate an existing mode * @dev: drm_device to allocate the duplicated mode for * @mode: mode to duplicate * * Just allocate a new mode, copy the existing mode into it, and return * a pointer to it. Used to create new instances of established modes. * * Returns: * Pointer to duplicated mode on success, NULL on error. */ struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, const struct drm_display_mode *mode) { struct drm_display_mode *nmode; nmode = drm_mode_create(dev); if (!nmode) return NULL; drm_mode_copy(nmode, mode); return nmode; } EXPORT_SYMBOL(drm_mode_duplicate); static bool drm_mode_match_timings(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return mode1->hdisplay == mode2->hdisplay && mode1->hsync_start == mode2->hsync_start && mode1->hsync_end == mode2->hsync_end && mode1->htotal == mode2->htotal && mode1->hskew == mode2->hskew && mode1->vdisplay == mode2->vdisplay && mode1->vsync_start == mode2->vsync_start && mode1->vsync_end == mode2->vsync_end && mode1->vtotal == mode2->vtotal && mode1->vscan == mode2->vscan; } static bool drm_mode_match_clock(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { /* * do clock check convert to PICOS * so fb modes get matched the same */ if (mode1->clock && mode2->clock) return KHZ2PICOS(mode1->clock) == KHZ2PICOS(mode2->clock); else return mode1->clock == mode2->clock; } static bool drm_mode_match_flags(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return (mode1->flags & ~DRM_MODE_FLAG_3D_MASK) == (mode2->flags & ~DRM_MODE_FLAG_3D_MASK); } static bool drm_mode_match_3d_flags(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return (mode1->flags & DRM_MODE_FLAG_3D_MASK) == (mode2->flags & DRM_MODE_FLAG_3D_MASK); } static bool drm_mode_match_aspect_ratio(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return mode1->picture_aspect_ratio == mode2->picture_aspect_ratio; } /** * drm_mode_match - test modes for (partial) equality * @mode1: first mode * @mode2: second mode * @match_flags: which parts need to match (DRM_MODE_MATCH_*) * * Check to see if @mode1 and @mode2 are equivalent. * * Returns: * True if the modes are (partially) equal, false otherwise. */ bool drm_mode_match(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2, unsigned int match_flags) { if (!mode1 && !mode2) return true; if (!mode1 || !mode2) return false; if (match_flags & DRM_MODE_MATCH_TIMINGS && !drm_mode_match_timings(mode1, mode2)) return false; if (match_flags & DRM_MODE_MATCH_CLOCK && !drm_mode_match_clock(mode1, mode2)) return false; if (match_flags & DRM_MODE_MATCH_FLAGS && !drm_mode_match_flags(mode1, mode2)) return false; if (match_flags & DRM_MODE_MATCH_3D_FLAGS && !drm_mode_match_3d_flags(mode1, mode2)) return false; if (match_flags & DRM_MODE_MATCH_ASPECT_RATIO && !drm_mode_match_aspect_ratio(mode1, mode2)) return false; return true; } EXPORT_SYMBOL(drm_mode_match); /** * drm_mode_equal - test modes for equality * @mode1: first mode * @mode2: second mode * * Check to see if @mode1 and @mode2 are equivalent. * * Returns: * True if the modes are equal, false otherwise. */ bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return drm_mode_match(mode1, mode2, DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_CLOCK | DRM_MODE_MATCH_FLAGS | DRM_MODE_MATCH_3D_FLAGS| DRM_MODE_MATCH_ASPECT_RATIO); } EXPORT_SYMBOL(drm_mode_equal); /** * drm_mode_equal_no_clocks - test modes for equality * @mode1: first mode * @mode2: second mode * * Check to see if @mode1 and @mode2 are equivalent, but * don't check the pixel clocks. * * Returns: * True if the modes are equal, false otherwise. */ bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return drm_mode_match(mode1, mode2, DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS | DRM_MODE_MATCH_3D_FLAGS); } EXPORT_SYMBOL(drm_mode_equal_no_clocks); /** * drm_mode_equal_no_clocks_no_stereo - test modes for equality * @mode1: first mode * @mode2: second mode * * Check to see if @mode1 and @mode2 are equivalent, but * don't check the pixel clocks nor the stereo layout. * * Returns: * True if the modes are equal, false otherwise. */ bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return drm_mode_match(mode1, mode2, DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS); } EXPORT_SYMBOL(drm_mode_equal_no_clocks_no_stereo); static enum drm_mode_status drm_mode_validate_basic(const struct drm_display_mode *mode) { if (mode->type & ~DRM_MODE_TYPE_ALL) return MODE_BAD; if (mode->flags & ~DRM_MODE_FLAG_ALL) return MODE_BAD; if ((mode->flags & DRM_MODE_FLAG_3D_MASK) > DRM_MODE_FLAG_3D_MAX) return MODE_BAD; if (mode->clock == 0) return MODE_CLOCK_LOW; if (mode->hdisplay == 0 || mode->hsync_start < mode->hdisplay || mode->hsync_end < mode->hsync_start || mode->htotal < mode->hsync_end) return MODE_H_ILLEGAL; if (mode->vdisplay == 0 || mode->vsync_start < mode->vdisplay || mode->vsync_end < mode->vsync_start || mode->vtotal < mode->vsync_end) return MODE_V_ILLEGAL; return MODE_OK; } /** * drm_mode_validate_driver - make sure the mode is somewhat sane * @dev: drm device * @mode: mode to check * * First do basic validation on the mode, and then allow the driver * to check for device/driver specific limitations via the optional * &drm_mode_config_helper_funcs.mode_valid hook. * * Returns: * The mode status */ enum drm_mode_status drm_mode_validate_driver(struct drm_device *dev, const struct drm_display_mode *mode) { enum drm_mode_status status; status = drm_mode_validate_basic(mode); if (status != MODE_OK) return status; if (dev->mode_config.funcs->mode_valid) return dev->mode_config.funcs->mode_valid(dev, mode); else return MODE_OK; } EXPORT_SYMBOL(drm_mode_validate_driver); /** * drm_mode_validate_size - make sure modes adhere to size constraints * @mode: mode to check * @maxX: maximum width * @maxY: maximum height * * This function is a helper which can be used to validate modes against size * limitations of the DRM device/connector. If a mode is too big its status * member is updated with the appropriate validation failure code. The list * itself is not changed. * * Returns: * The mode status */ enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode, int maxX, int maxY) { if (maxX > 0 && mode->hdisplay > maxX) return MODE_VIRTUAL_X; if (maxY > 0 && mode->vdisplay > maxY) return MODE_VIRTUAL_Y; return MODE_OK; } EXPORT_SYMBOL(drm_mode_validate_size); /** * drm_mode_validate_ycbcr420 - add 'ycbcr420-only' modes only when allowed * @mode: mode to check * @connector: drm connector under action * * This function is a helper which can be used to filter out any YCBCR420 * only mode, when the source doesn't support it. * * Returns: * The mode status */ enum drm_mode_status drm_mode_validate_ycbcr420(const struct drm_display_mode *mode, struct drm_connector *connector) { if (!connector->ycbcr_420_allowed && drm_mode_is_420_only(&connector->display_info, mode)) return MODE_NO_420; return MODE_OK; } EXPORT_SYMBOL(drm_mode_validate_ycbcr420); #define MODE_STATUS(status) [MODE_ ## status + 3] = #status static const char * const drm_mode_status_names[] = { MODE_STATUS(OK), MODE_STATUS(HSYNC), MODE_STATUS(VSYNC), MODE_STATUS(H_ILLEGAL), MODE_STATUS(V_ILLEGAL), MODE_STATUS(BAD_WIDTH), MODE_STATUS(NOMODE), MODE_STATUS(NO_INTERLACE), MODE_STATUS(NO_DBLESCAN), MODE_STATUS(NO_VSCAN), MODE_STATUS(MEM), MODE_STATUS(VIRTUAL_X), MODE_STATUS(VIRTUAL_Y), MODE_STATUS(MEM_VIRT), MODE_STATUS(NOCLOCK), MODE_STATUS(CLOCK_HIGH), MODE_STATUS(CLOCK_LOW), MODE_STATUS(CLOCK_RANGE), MODE_STATUS(BAD_HVALUE), MODE_STATUS(BAD_VVALUE), MODE_STATUS(BAD_VSCAN), MODE_STATUS(HSYNC_NARROW), MODE_STATUS(HSYNC_WIDE), MODE_STATUS(HBLANK_NARROW), MODE_STATUS(HBLANK_WIDE), MODE_STATUS(VSYNC_NARROW), MODE_STATUS(VSYNC_WIDE), MODE_STATUS(VBLANK_NARROW), MODE_STATUS(VBLANK_WIDE), MODE_STATUS(PANEL), MODE_STATUS(INTERLACE_WIDTH), MODE_STATUS(ONE_WIDTH), MODE_STATUS(ONE_HEIGHT), MODE_STATUS(ONE_SIZE), MODE_STATUS(NO_REDUCED), MODE_STATUS(NO_STEREO), MODE_STATUS(NO_420), MODE_STATUS(STALE), MODE_STATUS(BAD), MODE_STATUS(ERROR), }; #undef MODE_STATUS const char *drm_get_mode_status_name(enum drm_mode_status status) { int index = status + 3; if (WARN_ON(index < 0 || index >= ARRAY_SIZE(drm_mode_status_names))) return ""; return drm_mode_status_names[index]; } /** * drm_mode_prune_invalid - remove invalid modes from mode list * @dev: DRM device * @mode_list: list of modes to check * @verbose: be verbose about it * * This helper function can be used to prune a display mode list after * validation has been completed. All modes whose status is not MODE_OK will be * removed from the list, and if @verbose the status code and mode name is also * printed to dmesg. */ void drm_mode_prune_invalid(struct drm_device *dev, struct list_head *mode_list, bool verbose) { struct drm_display_mode *mode, *t; list_for_each_entry_safe(mode, t, mode_list, head) { if (mode->status != MODE_OK) { list_del(&mode->head); if (mode->type & DRM_MODE_TYPE_USERDEF) { drm_warn(dev, "User-defined mode not supported: " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode)); } if (verbose) { drm_dbg_kms(dev, "Rejected mode: " DRM_MODE_FMT " (%s)\n", DRM_MODE_ARG(mode), drm_get_mode_status_name(mode->status)); } drm_mode_destroy(dev, mode); } } } EXPORT_SYMBOL(drm_mode_prune_invalid); /** * drm_mode_compare - compare modes for favorability * @priv: unused * @lh_a: list_head for first mode * @lh_b: list_head for second mode * * Compare two modes, given by @lh_a and @lh_b, returning a value indicating * which is better. * * Returns: * Negative if @lh_a is better than @lh_b, zero if they're equivalent, or * positive if @lh_b is better than @lh_a. */ static int drm_mode_compare(void *priv, const struct list_head *lh_a, const struct list_head *lh_b) { struct drm_display_mode *a = list_entry(lh_a, struct drm_display_mode, head); struct drm_display_mode *b = list_entry(lh_b, struct drm_display_mode, head); int diff; diff = ((b->type & DRM_MODE_TYPE_PREFERRED) != 0) - ((a->type & DRM_MODE_TYPE_PREFERRED) != 0); if (diff) return diff; diff = b->hdisplay * b->vdisplay - a->hdisplay * a->vdisplay; if (diff) return diff; diff = drm_mode_vrefresh(b) - drm_mode_vrefresh(a); if (diff) return diff; diff = b->clock - a->clock; return diff; } /** * drm_mode_sort - sort mode list * @mode_list: list of drm_display_mode structures to sort * * Sort @mode_list by favorability, moving good modes to the head of the list. */ void drm_mode_sort(struct list_head *mode_list) { list_sort(NULL, mode_list, drm_mode_compare); } EXPORT_SYMBOL(drm_mode_sort); /** * drm_connector_list_update - update the mode list for the connector * @connector: the connector to update * * This moves the modes from the @connector probed_modes list * to the actual mode list. It compares the probed mode against the current * list and only adds different/new modes. * * This is just a helper functions doesn't validate any modes itself and also * doesn't prune any invalid modes. Callers need to do that themselves. */ void drm_connector_list_update(struct drm_connector *connector) { struct drm_display_mode *pmode, *pt; WARN_ON(!mutex_is_locked(&connector->dev->mode_config.mutex)); list_for_each_entry_safe(pmode, pt, &connector->probed_modes, head) { struct drm_display_mode *mode; bool found_it = false; /* go through current modes checking for the new probed mode */ list_for_each_entry(mode, &connector->modes, head) { if (!drm_mode_equal(pmode, mode)) continue; found_it = true; /* * If the old matching mode is stale (ie. left over * from a previous probe) just replace it outright. * Otherwise just merge the type bits between all * equal probed modes. * * If two probed modes are considered equal, pick the * actual timings from the one that's marked as * preferred (in case the match isn't 100%). If * multiple or zero preferred modes are present, favor * the mode added to the probed_modes list first. */ if (mode->status == MODE_STALE) { drm_mode_copy(mode, pmode); } else if ((mode->type & DRM_MODE_TYPE_PREFERRED) == 0 && (pmode->type & DRM_MODE_TYPE_PREFERRED) != 0) { pmode->type |= mode->type; drm_mode_copy(mode, pmode); } else { mode->type |= pmode->type; } list_del(&pmode->head); drm_mode_destroy(connector->dev, pmode); break; } if (!found_it) { list_move_tail(&pmode->head, &connector->modes); } } } EXPORT_SYMBOL(drm_connector_list_update); static int drm_mode_parse_cmdline_bpp(const char *str, char **end_ptr, struct drm_cmdline_mode *mode) { unsigned int bpp; if (str[0] != '-') return -EINVAL; str++; bpp = simple_strtol(str, end_ptr, 10); if (*end_ptr == str) return -EINVAL; mode->bpp = bpp; mode->bpp_specified = true; return 0; } static int drm_mode_parse_cmdline_refresh(const char *str, char **end_ptr, struct drm_cmdline_mode *mode) { unsigned int refresh; if (str[0] != '@') return -EINVAL; str++; refresh = simple_strtol(str, end_ptr, 10); if (*end_ptr == str) return -EINVAL; mode->refresh = refresh; mode->refresh_specified = true; return 0; } static int drm_mode_parse_cmdline_extra(const char *str, int length, bool freestanding, const struct drm_connector *connector, struct drm_cmdline_mode *mode) { int i; for (i = 0; i < length; i++) { switch (str[i]) { case 'i': if (freestanding) return -EINVAL; mode->interlace = true; break; case 'm': if (freestanding) return -EINVAL; mode->margins = true; break; case 'D': if (mode->force != DRM_FORCE_UNSPECIFIED) return -EINVAL; if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) && (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB)) mode->force = DRM_FORCE_ON; else mode->force = DRM_FORCE_ON_DIGITAL; break; case 'd': if (mode->force != DRM_FORCE_UNSPECIFIED) return -EINVAL; mode->force = DRM_FORCE_OFF; break; case 'e': if (mode->force != DRM_FORCE_UNSPECIFIED) return -EINVAL; mode->force = DRM_FORCE_ON; break; default: return -EINVAL; } } return 0; } static int drm_mode_parse_cmdline_res_mode(const char *str, unsigned int length, bool extras, const struct drm_connector *connector, struct drm_cmdline_mode *mode) { const char *str_start = str; bool rb = false, cvt = false; int xres = 0, yres = 0; int remaining, i; char *end_ptr; xres = simple_strtol(str, &end_ptr, 10); if (end_ptr == str) return -EINVAL; if (end_ptr[0] != 'x') return -EINVAL; end_ptr++; str = end_ptr; yres = simple_strtol(str, &end_ptr, 10); if (end_ptr == str) return -EINVAL; remaining = length - (end_ptr - str_start); if (remaining < 0) return -EINVAL; for (i = 0; i < remaining; i++) { switch (end_ptr[i]) { case 'M': cvt = true; break; case 'R': rb = true; break; default: /* * Try to pass that to our extras parsing * function to handle the case where the * extras are directly after the resolution */ if (extras) { int ret = drm_mode_parse_cmdline_extra(end_ptr + i, 1, false, connector, mode); if (ret) return ret; } else { return -EINVAL; } } } mode->xres = xres; mode->yres = yres; mode->cvt = cvt; mode->rb = rb; return 0; } static int drm_mode_parse_cmdline_int(const char *delim, unsigned int *int_ret) { const char *value; char *endp; /* * delim must point to the '=', otherwise it is a syntax error and * if delim points to the terminating zero, then delim + 1 will point * past the end of the string. */ if (*delim != '=') return -EINVAL; value = delim + 1; *int_ret = simple_strtol(value, &endp, 10); /* Make sure we have parsed something */ if (endp == value) return -EINVAL; return 0; } static int drm_mode_parse_panel_orientation(const char *delim, struct drm_cmdline_mode *mode) { const char *value; if (*delim != '=') return -EINVAL; value = delim + 1; delim = strchr(value, ','); if (!delim) delim = value + strlen(value); if (!strncmp(value, "normal", delim - value)) mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL; else if (!strncmp(value, "upside_down", delim - value)) mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP; else if (!strncmp(value, "left_side_up", delim - value)) mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP; else if (!strncmp(value, "right_side_up", delim - value)) mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP; else return -EINVAL; return 0; } static int drm_mode_parse_tv_mode(const char *delim, struct drm_cmdline_mode *mode) { const char *value; int ret; if (*delim != '=') return -EINVAL; value = delim + 1; delim = strchr(value, ','); if (!delim) delim = value + strlen(value); ret = drm_get_tv_mode_from_name(value, delim - value); if (ret < 0) return ret; mode->tv_mode_specified = true; mode->tv_mode = ret; return 0; } static int drm_mode_parse_cmdline_options(const char *str, bool freestanding, const struct drm_connector *connector, struct drm_cmdline_mode *mode) { unsigned int deg, margin, rotation = 0; const char *delim, *option, *sep; option = str; do { delim = strchr(option, '='); if (!delim) { delim = strchr(option, ','); if (!delim) delim = option + strlen(option); } if (!strncmp(option, "rotate", delim - option)) { if (drm_mode_parse_cmdline_int(delim, °)) return -EINVAL; switch (deg) { case 0: rotation |= DRM_MODE_ROTATE_0; break; case 90: rotation |= DRM_MODE_ROTATE_90; break; case 180: rotation |= DRM_MODE_ROTATE_180; break; case 270: rotation |= DRM_MODE_ROTATE_270; break; default: return -EINVAL; } } else if (!strncmp(option, "reflect_x", delim - option)) { rotation |= DRM_MODE_REFLECT_X; } else if (!strncmp(option, "reflect_y", delim - option)) { rotation |= DRM_MODE_REFLECT_Y; } else if (!strncmp(option, "margin_right", delim - option)) { if (drm_mode_parse_cmdline_int(delim, &margin)) return -EINVAL; mode->tv_margins.right = margin; } else if (!strncmp(option, "margin_left", delim - option)) { if (drm_mode_parse_cmdline_int(delim, &margin)) return -EINVAL; mode->tv_margins.left = margin; } else if (!strncmp(option, "margin_top", delim - option)) { if (drm_mode_parse_cmdline_int(delim, &margin)) return -EINVAL; mode->tv_margins.top = margin; } else if (!strncmp(option, "margin_bottom", delim - option)) { if (drm_mode_parse_cmdline_int(delim, &margin)) return -EINVAL; mode->tv_margins.bottom = margin; } else if (!strncmp(option, "panel_orientation", delim - option)) { if (drm_mode_parse_panel_orientation(delim, mode)) return -EINVAL; } else if (!strncmp(option, "tv_mode", delim - option)) { if (drm_mode_parse_tv_mode(delim, mode)) return -EINVAL; } else { return -EINVAL; } sep = strchr(delim, ','); option = sep + 1; } while (sep); if (rotation && freestanding) return -EINVAL; if (!(rotation & DRM_MODE_ROTATE_MASK)) rotation |= DRM_MODE_ROTATE_0; /* Make sure there is exactly one rotation defined */ if (!is_power_of_2(rotation & DRM_MODE_ROTATE_MASK)) return -EINVAL; mode->rotation_reflection = rotation; return 0; } struct drm_named_mode { const char *name; unsigned int pixel_clock_khz; unsigned int xres; unsigned int yres; unsigned int flags; unsigned int tv_mode; }; #define NAMED_MODE(_name, _pclk, _x, _y, _flags, _mode) \ { \ .name = _name, \ .pixel_clock_khz = _pclk, \ .xres = _x, \ .yres = _y, \ .flags = _flags, \ .tv_mode = _mode, \ } static const struct drm_named_mode drm_named_modes[] = { NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC), NAMED_MODE("NTSC-J", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_NTSC_J), NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL), NAMED_MODE("PAL-M", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE, DRM_MODE_TV_MODE_PAL_M), }; static int drm_mode_parse_cmdline_named_mode(const char *name, unsigned int name_end, struct drm_cmdline_mode *cmdline_mode) { unsigned int i; if (!name_end) return 0; /* If the name starts with a digit, it's not a named mode */ if (isdigit(name[0])) return 0; /* * If there's an equal sign in the name, the command-line * contains only an option and no mode. */ if (strnchr(name, name_end, '=')) return 0; /* The connection status extras can be set without a mode. */ if (name_end == 1 && (name[0] == 'd' || name[0] == 'D' || name[0] == 'e')) return 0; /* * We're sure we're a named mode at this point, iterate over the * list of modes we're aware of. */ for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) { const struct drm_named_mode *mode = &drm_named_modes[i]; int ret; ret = str_has_prefix(name, mode->name); if (ret != name_end) continue; strscpy(cmdline_mode->name, mode->name, sizeof(cmdline_mode->name)); cmdline_mode->pixel_clock = mode->pixel_clock_khz; cmdline_mode->xres = mode->xres; cmdline_mode->yres = mode->yres; cmdline_mode->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); cmdline_mode->tv_mode = mode->tv_mode; cmdline_mode->tv_mode_specified = true; cmdline_mode->specified = true; return 1; } return -EINVAL; } /** * drm_mode_parse_command_line_for_connector - parse command line modeline for connector * @mode_option: optional per connector mode option * @connector: connector to parse modeline for * @mode: preallocated drm_cmdline_mode structure to fill out * * This parses @mode_option command line modeline for modes and options to * configure the connector. * * This uses the same parameters as the fb modedb.c, except for an extra * force-enable, force-enable-digital and force-disable bit at the end:: * * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd] * * Additionals options can be provided following the mode, using a comma to * separate each option. Valid options can be found in * Documentation/fb/modedb.rst. * * The intermediate drm_cmdline_mode structure is required to store additional * options from the command line modline like the force-enable/disable flag. * * Returns: * True if a valid modeline has been parsed, false otherwise. */ bool drm_mode_parse_command_line_for_connector(const char *mode_option, const struct drm_connector *connector, struct drm_cmdline_mode *mode) { const char *name; bool freestanding = false, parse_extras = false; unsigned int bpp_off = 0, refresh_off = 0, options_off = 0; unsigned int mode_end = 0; const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL; const char *options_ptr = NULL; char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL; int len, ret; memset(mode, 0, sizeof(*mode)); mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; if (!mode_option) return false; name = mode_option; /* Locate the start of named options */ options_ptr = strchr(name, ','); if (options_ptr) options_off = options_ptr - name; else options_off = strlen(name); /* Try to locate the bpp and refresh specifiers, if any */ bpp_ptr = strnchr(name, options_off, '-'); while (bpp_ptr && !isdigit(bpp_ptr[1])) bpp_ptr = strnchr(bpp_ptr + 1, options_off, '-'); if (bpp_ptr) bpp_off = bpp_ptr - name; refresh_ptr = strnchr(name, options_off, '@'); if (refresh_ptr) refresh_off = refresh_ptr - name; /* Locate the end of the name / resolution, and parse it */ if (bpp_ptr) { mode_end = bpp_off; } else if (refresh_ptr) { mode_end = refresh_off; } else if (options_ptr) { mode_end = options_off; parse_extras = true; } else { mode_end = strlen(name); parse_extras = true; } if (!mode_end) return false; ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode); if (ret < 0) return false; /* * Having a mode that starts by a letter (and thus is named) and * an at-sign (used to specify a refresh rate) is disallowed. */ if (ret && refresh_ptr) return false; /* No named mode? Check for a normal mode argument, e.g. 1024x768 */ if (!mode->specified && isdigit(name[0])) { ret = drm_mode_parse_cmdline_res_mode(name, mode_end, parse_extras, connector, mode); if (ret) return false; mode->specified = true; } /* No mode? Check for freestanding extras and/or options */ if (!mode->specified) { unsigned int len = strlen(mode_option); if (bpp_ptr || refresh_ptr) return false; /* syntax error */ if (len == 1 || (len >= 2 && mode_option[1] == ',')) extra_ptr = mode_option; else options_ptr = mode_option - 1; freestanding = true; } if (bpp_ptr) { ret = drm_mode_parse_cmdline_bpp(bpp_ptr, &bpp_end_ptr, mode); if (ret) return false; mode->bpp_specified = true; } if (refresh_ptr) { ret = drm_mode_parse_cmdline_refresh(refresh_ptr, &refresh_end_ptr, mode); if (ret) return false; mode->refresh_specified = true; } /* * Locate the end of the bpp / refresh, and parse the extras * if relevant */ if (bpp_ptr && refresh_ptr) extra_ptr = max(bpp_end_ptr, refresh_end_ptr); else if (bpp_ptr) extra_ptr = bpp_end_ptr; else if (refresh_ptr) extra_ptr = refresh_end_ptr; if (extra_ptr) { if (options_ptr) len = options_ptr - extra_ptr; else len = strlen(extra_ptr); ret = drm_mode_parse_cmdline_extra(extra_ptr, len, freestanding, connector, mode); if (ret) return false; } if (options_ptr) { ret = drm_mode_parse_cmdline_options(options_ptr + 1, freestanding, connector, mode); if (ret) return false; } return true; } EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector); static struct drm_display_mode *drm_named_mode(struct drm_device *dev, struct drm_cmdline_mode *cmd) { unsigned int i; for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) { const struct drm_named_mode *named_mode = &drm_named_modes[i]; if (strcmp(cmd->name, named_mode->name)) continue; if (!cmd->tv_mode_specified) continue; return drm_analog_tv_mode(dev, named_mode->tv_mode, named_mode->pixel_clock_khz * 1000, named_mode->xres, named_mode->yres, named_mode->flags & DRM_MODE_FLAG_INTERLACE); } return NULL; } /** * drm_mode_create_from_cmdline_mode - convert a command line modeline into a DRM display mode * @dev: DRM device to create the new mode for * @cmd: input command line modeline * * Returns: * Pointer to converted mode on success, NULL on error. */ struct drm_display_mode * drm_mode_create_from_cmdline_mode(struct drm_device *dev, struct drm_cmdline_mode *cmd) { struct drm_display_mode *mode; if (cmd->xres == 0 || cmd->yres == 0) return NULL; if (strlen(cmd->name)) mode = drm_named_mode(dev, cmd); else if (cmd->cvt) mode = drm_cvt_mode(dev, cmd->xres, cmd->yres, cmd->refresh_specified ? cmd->refresh : 60, cmd->rb, cmd->interlace, cmd->margins); else mode = drm_gtf_mode(dev, cmd->xres, cmd->yres, cmd->refresh_specified ? cmd->refresh : 60, cmd->interlace, cmd->margins); if (!mode) return NULL; mode->type |= DRM_MODE_TYPE_USERDEF; /* fix up 1368x768: GFT/CVT can't express 1366 width due to alignment */ if (cmd->xres == 1366) drm_mode_fixup_1366x768(mode); drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); return mode; } EXPORT_SYMBOL(drm_mode_create_from_cmdline_mode); /** * drm_mode_convert_to_umode - convert a drm_display_mode into a modeinfo * @out: drm_mode_modeinfo struct to return to the user * @in: drm_display_mode to use * * Convert a drm_display_mode into a drm_mode_modeinfo structure to return to * the user. */ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, const struct drm_display_mode *in) { out->clock = in->clock; out->hdisplay = in->hdisplay; out->hsync_start = in->hsync_start; out->hsync_end = in->hsync_end; out->htotal = in->htotal; out->hskew = in->hskew; out->vdisplay = in->vdisplay; out->vsync_start = in->vsync_start; out->vsync_end = in->vsync_end; out->vtotal = in->vtotal; out->vscan = in->vscan; out->vrefresh = drm_mode_vrefresh(in); out->flags = in->flags; out->type = in->type; switch (in->picture_aspect_ratio) { case HDMI_PICTURE_ASPECT_4_3: out->flags |= DRM_MODE_FLAG_PIC_AR_4_3; break; case HDMI_PICTURE_ASPECT_16_9: out->flags |= DRM_MODE_FLAG_PIC_AR_16_9; break; case HDMI_PICTURE_ASPECT_64_27: out->flags |= DRM_MODE_FLAG_PIC_AR_64_27; break; case HDMI_PICTURE_ASPECT_256_135: out->flags |= DRM_MODE_FLAG_PIC_AR_256_135; break; default: WARN(1, "Invalid aspect ratio (0%x) on mode\n", in->picture_aspect_ratio); fallthrough; case HDMI_PICTURE_ASPECT_NONE: out->flags |= DRM_MODE_FLAG_PIC_AR_NONE; break; } strscpy_pad(out->name, in->name, sizeof(out->name)); } /** * drm_mode_convert_umode - convert a modeinfo into a drm_display_mode * @dev: drm device * @out: drm_display_mode to return to the user * @in: drm_mode_modeinfo to use * * Convert a drm_mode_modeinfo into a drm_display_mode structure to return to * the caller. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_convert_umode(struct drm_device *dev, struct drm_display_mode *out, const struct drm_mode_modeinfo *in) { if (in->clock > INT_MAX || in->vrefresh > INT_MAX) return -ERANGE; out->clock = in->clock; out->hdisplay = in->hdisplay; out->hsync_start = in->hsync_start; out->hsync_end = in->hsync_end; out->htotal = in->htotal; out->hskew = in->hskew; out->vdisplay = in->vdisplay; out->vsync_start = in->vsync_start; out->vsync_end = in->vsync_end; out->vtotal = in->vtotal; out->vscan = in->vscan; out->flags = in->flags; /* * Old xf86-video-vmware (possibly others too) used to * leave 'type' uninitialized. Just ignore any bits we * don't like. It's a just hint after all, and more * useful for the kernel->userspace direction anyway. */ out->type = in->type & DRM_MODE_TYPE_ALL; strscpy_pad(out->name, in->name, sizeof(out->name)); /* Clearing picture aspect ratio bits from out flags, * as the aspect-ratio information is not stored in * flags for kernel-mode, but in picture_aspect_ratio. */ out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK; switch (in->flags & DRM_MODE_FLAG_PIC_AR_MASK) { case DRM_MODE_FLAG_PIC_AR_4_3: out->picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3; break; case DRM_MODE_FLAG_PIC_AR_16_9: out->picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9; break; case DRM_MODE_FLAG_PIC_AR_64_27: out->picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27; break; case DRM_MODE_FLAG_PIC_AR_256_135: out->picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135; break; case DRM_MODE_FLAG_PIC_AR_NONE: out->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE; break; default: return -EINVAL; } out->status = drm_mode_validate_driver(dev, out); if (out->status != MODE_OK) return -EINVAL; drm_mode_set_crtcinfo(out, CRTC_INTERLACE_HALVE_V); return 0; } /** * drm_mode_is_420_only - if a given videomode can be only supported in YCBCR420 * output format * * @display: display under action * @mode: video mode to be tested. * * Returns: * true if the mode can be supported in YCBCR420 format * false if not. */ bool drm_mode_is_420_only(const struct drm_display_info *display, const struct drm_display_mode *mode) { u8 vic = drm_match_cea_mode(mode); return test_bit(vic, display->hdmi.y420_vdb_modes); } EXPORT_SYMBOL(drm_mode_is_420_only); /** * drm_mode_is_420_also - if a given videomode can be supported in YCBCR420 * output format also (along with RGB/YCBCR444/422) * * @display: display under action. * @mode: video mode to be tested. * * Returns: * true if the mode can be support YCBCR420 format * false if not. */ bool drm_mode_is_420_also(const struct drm_display_info *display, const struct drm_display_mode *mode) { u8 vic = drm_match_cea_mode(mode); return test_bit(vic, display->hdmi.y420_cmdb_modes); } EXPORT_SYMBOL(drm_mode_is_420_also); /** * drm_mode_is_420 - if a given videomode can be supported in YCBCR420 * output format * * @display: display under action. * @mode: video mode to be tested. * * Returns: * true if the mode can be supported in YCBCR420 format * false if not. */ bool drm_mode_is_420(const struct drm_display_info *display, const struct drm_display_mode *mode) { return drm_mode_is_420_only(display, mode) || drm_mode_is_420_also(display, mode); } EXPORT_SYMBOL(drm_mode_is_420); /** * drm_set_preferred_mode - Sets the preferred mode of a connector * @connector: connector whose mode list should be processed * @hpref: horizontal resolution of preferred mode * @vpref: vertical resolution of preferred mode * * Marks a mode as preferred if it matches the resolution specified by @hpref * and @vpref. */ void drm_set_preferred_mode(struct drm_connector *connector, int hpref, int vpref) { struct drm_display_mode *mode; list_for_each_entry(mode, &connector->probed_modes, head) { if (mode->hdisplay == hpref && mode->vdisplay == vpref) mode->type |= DRM_MODE_TYPE_PREFERRED; } } EXPORT_SYMBOL(drm_set_preferred_mode);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1