Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Dave Airlie | 5848 | 44.62% | 9 | 4.37% |
Ville Syrjälä | 2642 | 20.16% | 79 | 38.35% |
Jesse Barnes | 1591 | 12.14% | 6 | 2.91% |
Jani Nikula | 1289 | 9.83% | 29 | 14.08% |
Zhenyu Wang | 385 | 2.94% | 2 | 0.97% |
Eric Anholt | 296 | 2.26% | 2 | 0.97% |
Ma Ling | 180 | 1.37% | 2 | 0.97% |
Ander Conselvan de Oliveira | 170 | 1.30% | 13 | 6.31% |
Shaohua Li | 98 | 0.75% | 2 | 0.97% |
Radhakrishna Sripada | 89 | 0.68% | 2 | 0.97% |
Maarten Lankhorst | 86 | 0.66% | 7 | 3.40% |
Keith Packard | 76 | 0.58% | 2 | 0.97% |
Ben Widawsky | 65 | 0.50% | 1 | 0.49% |
Chris Wilson | 52 | 0.40% | 9 | 4.37% |
Imre Deak | 41 | 0.31% | 5 | 2.43% |
Wambui Karuga | 30 | 0.23% | 1 | 0.49% |
Daniel Vetter | 24 | 0.18% | 6 | 2.91% |
Matt Roper | 22 | 0.17% | 3 | 1.46% |
Tvrtko A. Ursulin | 20 | 0.15% | 4 | 1.94% |
Pankaj Bharadiya | 18 | 0.14% | 1 | 0.49% |
Lucas De Marchi | 16 | 0.12% | 6 | 2.91% |
Suraj Kandpal | 12 | 0.09% | 1 | 0.49% |
Wayne Boyer | 9 | 0.07% | 1 | 0.49% |
José Roberto de Souza | 9 | 0.07% | 1 | 0.49% |
Patrik Jakobsson | 8 | 0.06% | 1 | 0.49% |
Paulo Zanoni | 7 | 0.05% | 2 | 0.97% |
Dhinakaran Pandiyan | 5 | 0.04% | 2 | 0.97% |
Daniele Ceraolo Spurio | 4 | 0.03% | 1 | 0.49% |
Kevin Strasser | 4 | 0.03% | 1 | 0.49% |
Damien Lespiau | 3 | 0.02% | 1 | 0.49% |
Yakui Zhao | 2 | 0.02% | 1 | 0.49% |
Mika Kahola | 2 | 0.02% | 1 | 0.49% |
Chon Ming Lee | 2 | 0.02% | 1 | 0.49% |
Chandra Konduru | 2 | 0.02% | 1 | 0.49% |
Total | 13107 | 206 |
// SPDX-License-Identifier: MIT /* * Copyright © 2020 Intel Corporation */ #include <linux/kernel.h> #include <linux/string_helpers.h> #include "i915_reg.h" #include "intel_atomic.h" #include "intel_crtc.h" #include "intel_cx0_phy.h" #include "intel_de.h" #include "intel_display.h" #include "intel_display_types.h" #include "intel_dpio_phy.h" #include "intel_dpll.h" #include "intel_lvds.h" #include "intel_lvds_regs.h" #include "intel_panel.h" #include "intel_pps.h" #include "intel_snps_phy.h" #include "vlv_dpio_phy_regs.h" #include "vlv_sideband.h" struct intel_dpll_funcs { int (*crtc_compute_clock)(struct intel_atomic_state *state, struct intel_crtc *crtc); int (*crtc_get_shared_dpll)(struct intel_atomic_state *state, struct intel_crtc *crtc); }; struct intel_limit { struct { int min, max; } dot, vco, n, m, m1, m2, p, p1; struct { int dot_limit; int p2_slow, p2_fast; } p2; }; static const struct intel_limit intel_limits_i8xx_dac = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 908000, .max = 1512000 }, .n = { .min = 2, .max = 16 }, .m = { .min = 96, .max = 140 }, .m1 = { .min = 18, .max = 26 }, .m2 = { .min = 6, .max = 16 }, .p = { .min = 4, .max = 128 }, .p1 = { .min = 2, .max = 33 }, .p2 = { .dot_limit = 165000, .p2_slow = 4, .p2_fast = 2 }, }; static const struct intel_limit intel_limits_i8xx_dvo = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 908000, .max = 1512000 }, .n = { .min = 2, .max = 16 }, .m = { .min = 96, .max = 140 }, .m1 = { .min = 18, .max = 26 }, .m2 = { .min = 6, .max = 16 }, .p = { .min = 4, .max = 128 }, .p1 = { .min = 2, .max = 33 }, .p2 = { .dot_limit = 165000, .p2_slow = 4, .p2_fast = 4 }, }; static const struct intel_limit intel_limits_i8xx_lvds = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 908000, .max = 1512000 }, .n = { .min = 2, .max = 16 }, .m = { .min = 96, .max = 140 }, .m1 = { .min = 18, .max = 26 }, .m2 = { .min = 6, .max = 16 }, .p = { .min = 4, .max = 128 }, .p1 = { .min = 1, .max = 6 }, .p2 = { .dot_limit = 165000, .p2_slow = 14, .p2_fast = 7 }, }; static const struct intel_limit intel_limits_i9xx_sdvo = { .dot = { .min = 20000, .max = 400000 }, .vco = { .min = 1400000, .max = 2800000 }, .n = { .min = 1, .max = 6 }, .m = { .min = 70, .max = 120 }, .m1 = { .min = 8, .max = 18 }, .m2 = { .min = 3, .max = 7 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 200000, .p2_slow = 10, .p2_fast = 5 }, }; static const struct intel_limit intel_limits_i9xx_lvds = { .dot = { .min = 20000, .max = 400000 }, .vco = { .min = 1400000, .max = 2800000 }, .n = { .min = 1, .max = 6 }, .m = { .min = 70, .max = 120 }, .m1 = { .min = 8, .max = 18 }, .m2 = { .min = 3, .max = 7 }, .p = { .min = 7, .max = 98 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 112000, .p2_slow = 14, .p2_fast = 7 }, }; static const struct intel_limit intel_limits_g4x_sdvo = { .dot = { .min = 25000, .max = 270000 }, .vco = { .min = 1750000, .max = 3500000}, .n = { .min = 1, .max = 4 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 17, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 10, .max = 30 }, .p1 = { .min = 1, .max = 3}, .p2 = { .dot_limit = 270000, .p2_slow = 10, .p2_fast = 10 }, }; static const struct intel_limit intel_limits_g4x_hdmi = { .dot = { .min = 22000, .max = 400000 }, .vco = { .min = 1750000, .max = 3500000}, .n = { .min = 1, .max = 4 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 16, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8}, .p2 = { .dot_limit = 165000, .p2_slow = 10, .p2_fast = 5 }, }; static const struct intel_limit intel_limits_g4x_single_channel_lvds = { .dot = { .min = 20000, .max = 115000 }, .vco = { .min = 1750000, .max = 3500000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 17, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 28, .max = 112 }, .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 0, .p2_slow = 14, .p2_fast = 14 }, }; static const struct intel_limit intel_limits_g4x_dual_channel_lvds = { .dot = { .min = 80000, .max = 224000 }, .vco = { .min = 1750000, .max = 3500000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 17, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 14, .max = 42 }, .p1 = { .min = 2, .max = 6 }, .p2 = { .dot_limit = 0, .p2_slow = 7, .p2_fast = 7 }, }; static const struct intel_limit pnv_limits_sdvo = { .dot = { .min = 20000, .max = 400000}, .vco = { .min = 1700000, .max = 3500000 }, /* Pineview's Ncounter is a ring counter */ .n = { .min = 3, .max = 6 }, .m = { .min = 2, .max = 256 }, /* Pineview only has one combined m divider, which we treat as m2. */ .m1 = { .min = 0, .max = 0 }, .m2 = { .min = 0, .max = 254 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 200000, .p2_slow = 10, .p2_fast = 5 }, }; static const struct intel_limit pnv_limits_lvds = { .dot = { .min = 20000, .max = 400000 }, .vco = { .min = 1700000, .max = 3500000 }, .n = { .min = 3, .max = 6 }, .m = { .min = 2, .max = 256 }, .m1 = { .min = 0, .max = 0 }, .m2 = { .min = 0, .max = 254 }, .p = { .min = 7, .max = 112 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 112000, .p2_slow = 14, .p2_fast = 14 }, }; /* Ironlake / Sandybridge * * We calculate clock using (register_value + 2) for N/M1/M2, so here * the range value for them is (actual_value - 2). */ static const struct intel_limit ilk_limits_dac = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 5 }, .m = { .min = 79, .max = 127 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 10, .p2_fast = 5 }, }; static const struct intel_limit ilk_limits_single_lvds = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 79, .max = 118 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 28, .max = 112 }, .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 14, .p2_fast = 14 }, }; static const struct intel_limit ilk_limits_dual_lvds = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 79, .max = 127 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 14, .max = 56 }, .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 7, .p2_fast = 7 }, }; /* LVDS 100mhz refclk limits. */ static const struct intel_limit ilk_limits_single_lvds_100m = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 2 }, .m = { .min = 79, .max = 126 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 28, .max = 112 }, .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 14, .p2_fast = 14 }, }; static const struct intel_limit ilk_limits_dual_lvds_100m = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 79, .max = 126 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 14, .max = 42 }, .p1 = { .min = 2, .max = 6 }, .p2 = { .dot_limit = 225000, .p2_slow = 7, .p2_fast = 7 }, }; static const struct intel_limit intel_limits_vlv = { /* * These are based on the data rate limits (measured in fast clocks) * since those are the strictest limits we have. The fast * clock and actual rate limits are more relaxed, so checking * them would make no difference. */ .dot = { .min = 25000, .max = 270000 }, .vco = { .min = 4000000, .max = 6000000 }, .n = { .min = 1, .max = 7 }, .m1 = { .min = 2, .max = 3 }, .m2 = { .min = 11, .max = 156 }, .p1 = { .min = 2, .max = 3 }, .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */ }; static const struct intel_limit intel_limits_chv = { /* * These are based on the data rate limits (measured in fast clocks) * since those are the strictest limits we have. The fast * clock and actual rate limits are more relaxed, so checking * them would make no difference. */ .dot = { .min = 25000, .max = 540000 }, .vco = { .min = 4800000, .max = 6480000 }, .n = { .min = 1, .max = 1 }, .m1 = { .min = 2, .max = 2 }, .m2 = { .min = 24 << 22, .max = 175 << 22 }, .p1 = { .min = 2, .max = 4 }, .p2 = { .p2_slow = 1, .p2_fast = 14 }, }; static const struct intel_limit intel_limits_bxt = { .dot = { .min = 25000, .max = 594000 }, .vco = { .min = 4800000, .max = 6700000 }, .n = { .min = 1, .max = 1 }, .m1 = { .min = 2, .max = 2 }, /* FIXME: find real m2 limits */ .m2 = { .min = 2 << 22, .max = 255 << 22 }, .p1 = { .min = 2, .max = 4 }, .p2 = { .p2_slow = 1, .p2_fast = 20 }, }; /* * Platform specific helpers to calculate the port PLL loopback- (clock.m), * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic. * The helpers' return value is the rate of the clock that is fed to the * display engine's pipe which can be the above fast dot clock rate or a * divided-down version of it. */ /* m1 is reserved as 0 in Pineview, n is a ring counter */ static int pnv_calc_dpll_params(int refclk, struct dpll *clock) { clock->m = clock->m2 + 2; clock->p = clock->p1 * clock->p2; clock->vco = clock->n == 0 ? 0 : DIV_ROUND_CLOSEST(refclk * clock->m, clock->n); clock->dot = clock->p == 0 ? 0 : DIV_ROUND_CLOSEST(clock->vco, clock->p); return clock->dot; } static u32 i9xx_dpll_compute_m(const struct dpll *dpll) { return 5 * (dpll->m1 + 2) + (dpll->m2 + 2); } int i9xx_calc_dpll_params(int refclk, struct dpll *clock) { clock->m = i9xx_dpll_compute_m(clock); clock->p = clock->p1 * clock->p2; clock->vco = clock->n + 2 == 0 ? 0 : DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2); clock->dot = clock->p == 0 ? 0 : DIV_ROUND_CLOSEST(clock->vco, clock->p); return clock->dot; } static int vlv_calc_dpll_params(int refclk, struct dpll *clock) { clock->m = clock->m1 * clock->m2; clock->p = clock->p1 * clock->p2 * 5; clock->vco = clock->n == 0 ? 0 : DIV_ROUND_CLOSEST(refclk * clock->m, clock->n); clock->dot = clock->p == 0 ? 0 : DIV_ROUND_CLOSEST(clock->vco, clock->p); return clock->dot; } int chv_calc_dpll_params(int refclk, struct dpll *clock) { clock->m = clock->m1 * clock->m2; clock->p = clock->p1 * clock->p2 * 5; clock->vco = clock->n == 0 ? 0 : DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, clock->m), clock->n << 22); clock->dot = clock->p == 0 ? 0 : DIV_ROUND_CLOSEST(clock->vco, clock->p); return clock->dot; } static int i9xx_pll_refclk(const struct intel_crtc_state *crtc_state) { struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); const struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; if ((hw_state->dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) return i915->display.vbt.lvds_ssc_freq; else if (HAS_PCH_SPLIT(i915)) return 120000; else if (DISPLAY_VER(i915) != 2) return 96000; else return 48000; } void i9xx_dpll_get_hw_state(struct intel_crtc *crtc, struct intel_dpll_hw_state *dpll_hw_state) { struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); struct i9xx_dpll_hw_state *hw_state = &dpll_hw_state->i9xx; if (DISPLAY_VER(dev_priv) >= 4) { u32 tmp; /* No way to read it out on pipes B and C */ if (IS_CHERRYVIEW(dev_priv) && crtc->pipe != PIPE_A) tmp = dev_priv->display.state.chv_dpll_md[crtc->pipe]; else tmp = intel_de_read(dev_priv, DPLL_MD(crtc->pipe)); hw_state->dpll_md = tmp; } hw_state->dpll = intel_de_read(dev_priv, DPLL(crtc->pipe)); if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) { hw_state->fp0 = intel_de_read(dev_priv, FP0(crtc->pipe)); hw_state->fp1 = intel_de_read(dev_priv, FP1(crtc->pipe)); } else { /* Mask out read-only status bits. */ hw_state->dpll &= ~(DPLL_LOCK_VLV | DPLL_PORTC_READY_MASK | DPLL_PORTB_READY_MASK); } } /* Returns the clock of the currently programmed mode of the given pipe. */ void i9xx_crtc_clock_get(struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); const struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; u32 dpll = hw_state->dpll; u32 fp; struct dpll clock; int port_clock; int refclk = i9xx_pll_refclk(crtc_state); if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) fp = hw_state->fp0; else fp = hw_state->fp1; clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; if (IS_PINEVIEW(dev_priv)) { clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1; clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT; } else { clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; } if (DISPLAY_VER(dev_priv) != 2) { if (IS_PINEVIEW(dev_priv)) clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >> DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW); else clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >> DPLL_FPA01_P1_POST_DIV_SHIFT); switch (dpll & DPLL_MODE_MASK) { case DPLLB_MODE_DAC_SERIAL: clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ? 5 : 10; break; case DPLLB_MODE_LVDS: clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ? 7 : 14; break; default: drm_dbg_kms(&dev_priv->drm, "Unknown DPLL mode %08x in programmed " "mode\n", (int)(dpll & DPLL_MODE_MASK)); return; } if (IS_PINEVIEW(dev_priv)) port_clock = pnv_calc_dpll_params(refclk, &clock); else port_clock = i9xx_calc_dpll_params(refclk, &clock); } else { enum pipe lvds_pipe; if (IS_I85X(dev_priv) && intel_lvds_port_enabled(dev_priv, LVDS, &lvds_pipe) && lvds_pipe == crtc->pipe) { u32 lvds = intel_de_read(dev_priv, LVDS); clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> DPLL_FPA01_P1_POST_DIV_SHIFT); if (lvds & LVDS_CLKB_POWER_UP) clock.p2 = 7; else clock.p2 = 14; } else { if (dpll & PLL_P1_DIVIDE_BY_TWO) clock.p1 = 2; else { clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >> DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; } if (dpll & PLL_P2_DIVIDE_BY_4) clock.p2 = 4; else clock.p2 = 2; } port_clock = i9xx_calc_dpll_params(refclk, &clock); } /* * This value includes pixel_multiplier. We will use * port_clock to compute adjusted_mode.crtc_clock in the * encoder's get_config() function. */ crtc_state->port_clock = port_clock; } void vlv_crtc_clock_get(struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); enum dpio_channel ch = vlv_pipe_to_channel(crtc->pipe); enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe); const struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; int refclk = 100000; struct dpll clock; u32 tmp; /* In case of DSI, DPLL will not be used */ if ((hw_state->dpll & DPLL_VCO_ENABLE) == 0) return; vlv_dpio_get(dev_priv); tmp = vlv_dpio_read(dev_priv, phy, VLV_PLL_DW3(ch)); vlv_dpio_put(dev_priv); clock.m1 = REG_FIELD_GET(DPIO_M1_DIV_MASK, tmp); clock.m2 = REG_FIELD_GET(DPIO_M2_DIV_MASK, tmp); clock.n = REG_FIELD_GET(DPIO_N_DIV_MASK, tmp); clock.p1 = REG_FIELD_GET(DPIO_P1_DIV_MASK, tmp); clock.p2 = REG_FIELD_GET(DPIO_P2_DIV_MASK, tmp); crtc_state->port_clock = vlv_calc_dpll_params(refclk, &clock); } void chv_crtc_clock_get(struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); enum dpio_channel ch = vlv_pipe_to_channel(crtc->pipe); enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe); const struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; struct dpll clock; u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3; int refclk = 100000; /* In case of DSI, DPLL will not be used */ if ((hw_state->dpll & DPLL_VCO_ENABLE) == 0) return; vlv_dpio_get(dev_priv); cmn_dw13 = vlv_dpio_read(dev_priv, phy, CHV_CMN_DW13(ch)); pll_dw0 = vlv_dpio_read(dev_priv, phy, CHV_PLL_DW0(ch)); pll_dw1 = vlv_dpio_read(dev_priv, phy, CHV_PLL_DW1(ch)); pll_dw2 = vlv_dpio_read(dev_priv, phy, CHV_PLL_DW2(ch)); pll_dw3 = vlv_dpio_read(dev_priv, phy, CHV_PLL_DW3(ch)); vlv_dpio_put(dev_priv); clock.m1 = REG_FIELD_GET(DPIO_CHV_M1_DIV_MASK, pll_dw1) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0; clock.m2 = REG_FIELD_GET(DPIO_CHV_M2_DIV_MASK, pll_dw0) << 22; if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN) clock.m2 |= REG_FIELD_GET(DPIO_CHV_M2_FRAC_DIV_MASK, pll_dw2); clock.n = REG_FIELD_GET(DPIO_CHV_N_DIV_MASK, pll_dw1); clock.p1 = REG_FIELD_GET(DPIO_CHV_P1_DIV_MASK, cmn_dw13); clock.p2 = REG_FIELD_GET(DPIO_CHV_P2_DIV_MASK, cmn_dw13); crtc_state->port_clock = chv_calc_dpll_params(refclk, &clock); } /* * Returns whether the given set of divisors are valid for a given refclk with * the given connectors. */ static bool intel_pll_is_valid(struct drm_i915_private *dev_priv, const struct intel_limit *limit, const struct dpll *clock) { if (clock->n < limit->n.min || limit->n.max < clock->n) return false; if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) return false; if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) return false; if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) return false; if (!IS_PINEVIEW(dev_priv) && !IS_LP(dev_priv)) if (clock->m1 <= clock->m2) return false; if (!IS_LP(dev_priv)) { if (clock->p < limit->p.min || limit->p.max < clock->p) return false; if (clock->m < limit->m.min || limit->m.max < clock->m) return false; } if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) return false; /* XXX: We may need to be checking "Dot clock" depending on the multiplier, * connector, etc., rather than just a single range. */ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) return false; return true; } static int i9xx_select_p2_div(const struct intel_limit *limit, const struct intel_crtc_state *crtc_state, int target) { struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { /* * For LVDS just rely on its current settings for dual-channel. * We haven't figured out how to reliably set up different * single/dual channel state, if we even can. */ if (intel_is_dual_link_lvds(dev_priv)) return limit->p2.p2_fast; else return limit->p2.p2_slow; } else { if (target < limit->p2.dot_limit) return limit->p2.p2_slow; else return limit->p2.p2_fast; } } /* * Returns a set of divisors for the desired target clock with the given * refclk, or FALSE. * * Target and reference clocks are specified in kHz. * * If match_clock is provided, then best_clock P divider must match the P * divider from @match_clock used for LVDS downclocking. */ static bool i9xx_find_best_dpll(const struct intel_limit *limit, struct intel_crtc_state *crtc_state, int target, int refclk, const struct dpll *match_clock, struct dpll *best_clock) { struct drm_device *dev = crtc_state->uapi.crtc->dev; struct dpll clock; int err = target; memset(best_clock, 0, sizeof(*best_clock)); clock.p2 = i9xx_select_p2_div(limit, crtc_state, target); for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) { if (clock.m2 >= clock.m1) break; for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; clock.p1++) { int this_err; i9xx_calc_dpll_params(refclk, &clock); if (!intel_pll_is_valid(to_i915(dev), limit, &clock)) continue; if (match_clock && clock.p != match_clock->p) continue; this_err = abs(clock.dot - target); if (this_err < err) { *best_clock = clock; err = this_err; } } } } } return (err != target); } /* * Returns a set of divisors for the desired target clock with the given * refclk, or FALSE. * * Target and reference clocks are specified in kHz. * * If match_clock is provided, then best_clock P divider must match the P * divider from @match_clock used for LVDS downclocking. */ static bool pnv_find_best_dpll(const struct intel_limit *limit, struct intel_crtc_state *crtc_state, int target, int refclk, const struct dpll *match_clock, struct dpll *best_clock) { struct drm_device *dev = crtc_state->uapi.crtc->dev; struct dpll clock; int err = target; memset(best_clock, 0, sizeof(*best_clock)); clock.p2 = i9xx_select_p2_div(limit, crtc_state, target); for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) { for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; clock.p1++) { int this_err; pnv_calc_dpll_params(refclk, &clock); if (!intel_pll_is_valid(to_i915(dev), limit, &clock)) continue; if (match_clock && clock.p != match_clock->p) continue; this_err = abs(clock.dot - target); if (this_err < err) { *best_clock = clock; err = this_err; } } } } } return (err != target); } /* * Returns a set of divisors for the desired target clock with the given * refclk, or FALSE. * * Target and reference clocks are specified in kHz. * * If match_clock is provided, then best_clock P divider must match the P * divider from @match_clock used for LVDS downclocking. */ static bool g4x_find_best_dpll(const struct intel_limit *limit, struct intel_crtc_state *crtc_state, int target, int refclk, const struct dpll *match_clock, struct dpll *best_clock) { struct drm_device *dev = crtc_state->uapi.crtc->dev; struct dpll clock; int max_n; bool found = false; /* approximately equals target * 0.00585 */ int err_most = (target >> 8) + (target >> 9); memset(best_clock, 0, sizeof(*best_clock)); clock.p2 = i9xx_select_p2_div(limit, crtc_state, target); max_n = limit->n.max; /* based on hardware requirement, prefer smaller n to precision */ for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { /* based on hardware requirement, prefere larger m1,m2 */ for (clock.m1 = limit->m1.max; clock.m1 >= limit->m1.min; clock.m1--) { for (clock.m2 = limit->m2.max; clock.m2 >= limit->m2.min; clock.m2--) { for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { int this_err; i9xx_calc_dpll_params(refclk, &clock); if (!intel_pll_is_valid(to_i915(dev), limit, &clock)) continue; this_err = abs(clock.dot - target); if (this_err < err_most) { *best_clock = clock; err_most = this_err; max_n = clock.n; found = true; } } } } } return found; } /* * Check if the calculated PLL configuration is more optimal compared to the * best configuration and error found so far. Return the calculated error. */ static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq, const struct dpll *calculated_clock, const struct dpll *best_clock, unsigned int best_error_ppm, unsigned int *error_ppm) { /* * For CHV ignore the error and consider only the P value. * Prefer a bigger P value based on HW requirements. */ if (IS_CHERRYVIEW(to_i915(dev))) { *error_ppm = 0; return calculated_clock->p > best_clock->p; } if (drm_WARN_ON_ONCE(dev, !target_freq)) return false; *error_ppm = div_u64(1000000ULL * abs(target_freq - calculated_clock->dot), target_freq); /* * Prefer a better P value over a better (smaller) error if the error * is small. Ensure this preference for future configurations too by * setting the error to 0. */ if (*error_ppm < 100 && calculated_clock->p > best_clock->p) { *error_ppm = 0; return true; } return *error_ppm + 10 < best_error_ppm; } /* * Returns a set of divisors for the desired target clock with the given * refclk, or FALSE. */ static bool vlv_find_best_dpll(const struct intel_limit *limit, struct intel_crtc_state *crtc_state, int target, int refclk, const struct dpll *match_clock, struct dpll *best_clock) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_device *dev = crtc->base.dev; struct dpll clock; unsigned int bestppm = 1000000; /* min update 19.2 MHz */ int max_n = min(limit->n.max, refclk / 19200); bool found = false; memset(best_clock, 0, sizeof(*best_clock)); /* based on hardware requirement, prefer smaller n to precision */ for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow; clock.p2 -= clock.p2 > 10 ? 2 : 1) { clock.p = clock.p1 * clock.p2 * 5; /* based on hardware requirement, prefer bigger m1,m2 values */ for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { unsigned int ppm; clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n, refclk * clock.m1); vlv_calc_dpll_params(refclk, &clock); if (!intel_pll_is_valid(to_i915(dev), limit, &clock)) continue; if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock, bestppm, &ppm)) continue; *best_clock = clock; bestppm = ppm; found = true; } } } } return found; } /* * Returns a set of divisors for the desired target clock with the given * refclk, or FALSE. */ static bool chv_find_best_dpll(const struct intel_limit *limit, struct intel_crtc_state *crtc_state, int target, int refclk, const struct dpll *match_clock, struct dpll *best_clock) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_device *dev = crtc->base.dev; unsigned int best_error_ppm; struct dpll clock; u64 m2; int found = false; memset(best_clock, 0, sizeof(*best_clock)); best_error_ppm = 1000000; /* * Based on hardware doc, the n always set to 1, and m1 always * set to 2. If requires to support 200Mhz refclk, we need to * revisit this because n may not 1 anymore. */ clock.n = 1; clock.m1 = 2; for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow; clock.p2 -= clock.p2 > 10 ? 2 : 1) { unsigned int error_ppm; clock.p = clock.p1 * clock.p2 * 5; m2 = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(target, clock.p * clock.n) << 22, refclk * clock.m1); if (m2 > INT_MAX/clock.m1) continue; clock.m2 = m2; chv_calc_dpll_params(refclk, &clock); if (!intel_pll_is_valid(to_i915(dev), limit, &clock)) continue; if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock, best_error_ppm, &error_ppm)) continue; *best_clock = clock; best_error_ppm = error_ppm; found = true; } } return found; } bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, struct dpll *best_clock) { const struct intel_limit *limit = &intel_limits_bxt; int refclk = 100000; return chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock, refclk, NULL, best_clock); } u32 i9xx_dpll_compute_fp(const struct dpll *dpll) { return dpll->n << 16 | dpll->m1 << 8 | dpll->m2; } static u32 pnv_dpll_compute_fp(const struct dpll *dpll) { return (1 << dpll->n) << 16 | dpll->m2; } static u32 i965_dpll_md(const struct intel_crtc_state *crtc_state) { return (crtc_state->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; } static u32 i9xx_dpll(const struct intel_crtc_state *crtc_state, const struct dpll *clock, const struct dpll *reduced_clock) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); u32 dpll; dpll = DPLL_VCO_ENABLE | DPLL_VGA_MODE_DIS; if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) || IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) { dpll |= (crtc_state->pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; } if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) || intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) dpll |= DPLL_SDVO_HIGH_SPEED; if (intel_crtc_has_dp_encoder(crtc_state)) dpll |= DPLL_SDVO_HIGH_SPEED; /* compute bitmask from p1 value */ if (IS_G4X(dev_priv)) { dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; } else if (IS_PINEVIEW(dev_priv)) { dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; WARN_ON(reduced_clock->p1 != clock->p1); } else { dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; WARN_ON(reduced_clock->p1 != clock->p1); } switch (clock->p2) { case 5: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; break; case 7: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; break; case 10: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; break; case 14: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } WARN_ON(reduced_clock->p2 != clock->p2); if (DISPLAY_VER(dev_priv) >= 4) dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); if (crtc_state->sdvo_tv_clock) dpll |= PLL_REF_INPUT_TVCLKINBC; else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) && intel_panel_use_ssc(dev_priv)) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; return dpll; } static void i9xx_compute_dpll(struct intel_crtc_state *crtc_state, const struct dpll *clock, const struct dpll *reduced_clock) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; if (IS_PINEVIEW(dev_priv)) { hw_state->fp0 = pnv_dpll_compute_fp(clock); hw_state->fp1 = pnv_dpll_compute_fp(reduced_clock); } else { hw_state->fp0 = i9xx_dpll_compute_fp(clock); hw_state->fp1 = i9xx_dpll_compute_fp(reduced_clock); } hw_state->dpll = i9xx_dpll(crtc_state, clock, reduced_clock); if (DISPLAY_VER(dev_priv) >= 4) hw_state->dpll_md = i965_dpll_md(crtc_state); } static u32 i8xx_dpll(const struct intel_crtc_state *crtc_state, const struct dpll *clock, const struct dpll *reduced_clock) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); u32 dpll; dpll = DPLL_VCO_ENABLE | DPLL_VGA_MODE_DIS; if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; } else { if (clock->p1 == 2) dpll |= PLL_P1_DIVIDE_BY_TWO; else dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; if (clock->p2 == 4) dpll |= PLL_P2_DIVIDE_BY_4; } WARN_ON(reduced_clock->p1 != clock->p1); WARN_ON(reduced_clock->p2 != clock->p2); /* * Bspec: * "[Almador Errata}: For the correct operation of the muxed DVO pins * (GDEVSELB/I2Cdata, GIRDBY/I2CClk) and (GFRAMEB/DVI_Data, * GTRDYB/DVI_Clk): Bit 31 (DPLL VCO Enable) and Bit 30 (2X Clock * Enable) must be set to “1” in both the DPLL A Control Register * (06014h-06017h) and DPLL B Control Register (06018h-0601Bh)." * * For simplicity We simply keep both bits always enabled in * both DPLLS. The spec says we should disable the DVO 2X clock * when not needed, but this seems to work fine in practice. */ if (IS_I830(dev_priv) || intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) dpll |= DPLL_DVO_2X_MODE; if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) && intel_panel_use_ssc(dev_priv)) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; return dpll; } static void i8xx_compute_dpll(struct intel_crtc_state *crtc_state, const struct dpll *clock, const struct dpll *reduced_clock) { struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; hw_state->fp0 = i9xx_dpll_compute_fp(clock); hw_state->fp1 = i9xx_dpll_compute_fp(reduced_clock); hw_state->dpll = i8xx_dpll(crtc_state, clock, reduced_clock); } static int hsw_crtc_compute_clock(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = to_i915(state->base.dev); struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); struct intel_encoder *encoder = intel_get_crtc_new_encoder(state, crtc_state); int ret; if (DISPLAY_VER(dev_priv) < 11 && intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) return 0; ret = intel_compute_shared_dplls(state, crtc, encoder); if (ret) return ret; /* FIXME this is a mess */ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) return 0; /* CRT dotclock is determined via other means */ if (!crtc_state->has_pch_encoder) crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); return 0; } static int hsw_crtc_get_shared_dpll(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = to_i915(state->base.dev); struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); struct intel_encoder *encoder = intel_get_crtc_new_encoder(state, crtc_state); if (DISPLAY_VER(dev_priv) < 11 && intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) return 0; return intel_reserve_shared_dplls(state, crtc, encoder); } static int dg2_crtc_compute_clock(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); struct intel_encoder *encoder = intel_get_crtc_new_encoder(state, crtc_state); int ret; ret = intel_mpllb_calc_state(crtc_state, encoder); if (ret) return ret; crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); return 0; } static int mtl_crtc_compute_clock(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); struct intel_encoder *encoder = intel_get_crtc_new_encoder(state, crtc_state); int ret; ret = intel_cx0pll_calc_state(crtc_state, encoder); if (ret) return ret; /* TODO: Do the readback via intel_compute_shared_dplls() */ crtc_state->port_clock = intel_cx0pll_calc_port_clock(encoder, &crtc_state->dpll_hw_state.cx0pll); crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); return 0; } static int ilk_fb_cb_factor(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *i915 = to_i915(crtc->base.dev); if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) && ((intel_panel_use_ssc(i915) && i915->display.vbt.lvds_ssc_freq == 100000) || (HAS_PCH_IBX(i915) && intel_is_dual_link_lvds(i915)))) return 25; if (crtc_state->sdvo_tv_clock) return 20; return 21; } static bool ilk_needs_fb_cb_tune(const struct dpll *dpll, int factor) { return dpll->m < factor * dpll->n; } static u32 ilk_dpll_compute_fp(const struct dpll *clock, int factor) { u32 fp; fp = i9xx_dpll_compute_fp(clock); if (ilk_needs_fb_cb_tune(clock, factor)) fp |= FP_CB_TUNE; return fp; } static u32 ilk_dpll(const struct intel_crtc_state *crtc_state, const struct dpll *clock, const struct dpll *reduced_clock) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); u32 dpll; dpll = DPLL_VCO_ENABLE; if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; dpll |= (crtc_state->pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) || intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) dpll |= DPLL_SDVO_HIGH_SPEED; if (intel_crtc_has_dp_encoder(crtc_state)) dpll |= DPLL_SDVO_HIGH_SPEED; /* * The high speed IO clock is only really required for * SDVO/HDMI/DP, but we also enable it for CRT to make it * possible to share the DPLL between CRT and HDMI. Enabling * the clock needlessly does no real harm, except use up a * bit of power potentially. * * We'll limit this to IVB with 3 pipes, since it has only two * DPLLs and so DPLL sharing is the only way to get three pipes * driving PCH ports at the same time. On SNB we could do this, * and potentially avoid enabling the second DPLL, but it's not * clear if it''s a win or loss power wise. No point in doing * this on ILK at all since it has a fixed DPLL<->pipe mapping. */ if (INTEL_NUM_PIPES(dev_priv) == 3 && intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) dpll |= DPLL_SDVO_HIGH_SPEED; /* compute bitmask from p1 value */ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; /* also FPA1 */ dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; switch (clock->p2) { case 5: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; break; case 7: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; break; case 10: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; break; case 14: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } WARN_ON(reduced_clock->p2 != clock->p2); if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) && intel_panel_use_ssc(dev_priv)) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; return dpll; } static void ilk_compute_dpll(struct intel_crtc_state *crtc_state, const struct dpll *clock, const struct dpll *reduced_clock) { struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; int factor = ilk_fb_cb_factor(crtc_state); hw_state->fp0 = ilk_dpll_compute_fp(clock, factor); hw_state->fp1 = ilk_dpll_compute_fp(reduced_clock, factor); hw_state->dpll = ilk_dpll(crtc_state, clock, reduced_clock); } static int ilk_crtc_compute_clock(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = to_i915(state->base.dev); struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); const struct intel_limit *limit; int refclk = 120000; int ret; /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */ if (!crtc_state->has_pch_encoder) return 0; if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { if (intel_panel_use_ssc(dev_priv)) { drm_dbg_kms(&dev_priv->drm, "using SSC reference clock of %d kHz\n", dev_priv->display.vbt.lvds_ssc_freq); refclk = dev_priv->display.vbt.lvds_ssc_freq; } if (intel_is_dual_link_lvds(dev_priv)) { if (refclk == 100000) limit = &ilk_limits_dual_lvds_100m; else limit = &ilk_limits_dual_lvds; } else { if (refclk == 100000) limit = &ilk_limits_single_lvds_100m; else limit = &ilk_limits_single_lvds; } } else { limit = &ilk_limits_dac; } if (!crtc_state->clock_set && !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock, refclk, NULL, &crtc_state->dpll)) return -EINVAL; i9xx_calc_dpll_params(refclk, &crtc_state->dpll); ilk_compute_dpll(crtc_state, &crtc_state->dpll, &crtc_state->dpll); ret = intel_compute_shared_dplls(state, crtc, NULL); if (ret) return ret; crtc_state->port_clock = crtc_state->dpll.dot; crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); return ret; } static int ilk_crtc_get_shared_dpll(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */ if (!crtc_state->has_pch_encoder) return 0; return intel_reserve_shared_dplls(state, crtc, NULL); } static u32 vlv_dpll(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); u32 dpll; dpll = DPLL_INTEGRATED_REF_CLK_VLV | DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; if (crtc->pipe != PIPE_A) dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; /* DPLL not used with DSI, but still need the rest set up */ if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) dpll |= DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV; return dpll; } void vlv_compute_dpll(struct intel_crtc_state *crtc_state) { struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; hw_state->dpll = vlv_dpll(crtc_state); hw_state->dpll_md = i965_dpll_md(crtc_state); } static u32 chv_dpll(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); u32 dpll; dpll = DPLL_SSC_REF_CLK_CHV | DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; if (crtc->pipe != PIPE_A) dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; /* DPLL not used with DSI, but still need the rest set up */ if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) dpll |= DPLL_VCO_ENABLE; return dpll; } void chv_compute_dpll(struct intel_crtc_state *crtc_state) { struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; hw_state->dpll = chv_dpll(crtc_state); hw_state->dpll_md = i965_dpll_md(crtc_state); } static int chv_crtc_compute_clock(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); const struct intel_limit *limit = &intel_limits_chv; int refclk = 100000; if (!crtc_state->clock_set && !chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock, refclk, NULL, &crtc_state->dpll)) return -EINVAL; chv_calc_dpll_params(refclk, &crtc_state->dpll); chv_compute_dpll(crtc_state); /* FIXME this is a mess */ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) return 0; crtc_state->port_clock = crtc_state->dpll.dot; crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); return 0; } static int vlv_crtc_compute_clock(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); const struct intel_limit *limit = &intel_limits_vlv; int refclk = 100000; if (!crtc_state->clock_set && !vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock, refclk, NULL, &crtc_state->dpll)) return -EINVAL; vlv_calc_dpll_params(refclk, &crtc_state->dpll); vlv_compute_dpll(crtc_state); /* FIXME this is a mess */ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) return 0; crtc_state->port_clock = crtc_state->dpll.dot; crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); return 0; } static int g4x_crtc_compute_clock(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = to_i915(state->base.dev); struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); const struct intel_limit *limit; int refclk = 96000; if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { if (intel_panel_use_ssc(dev_priv)) { refclk = dev_priv->display.vbt.lvds_ssc_freq; drm_dbg_kms(&dev_priv->drm, "using SSC reference clock of %d kHz\n", refclk); } if (intel_is_dual_link_lvds(dev_priv)) limit = &intel_limits_g4x_dual_channel_lvds; else limit = &intel_limits_g4x_single_channel_lvds; } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) || intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) { limit = &intel_limits_g4x_hdmi; } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) { limit = &intel_limits_g4x_sdvo; } else { /* The option is for other outputs */ limit = &intel_limits_i9xx_sdvo; } if (!crtc_state->clock_set && !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock, refclk, NULL, &crtc_state->dpll)) return -EINVAL; i9xx_calc_dpll_params(refclk, &crtc_state->dpll); i9xx_compute_dpll(crtc_state, &crtc_state->dpll, &crtc_state->dpll); crtc_state->port_clock = crtc_state->dpll.dot; /* FIXME this is a mess */ if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_TVOUT)) crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); return 0; } static int pnv_crtc_compute_clock(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = to_i915(state->base.dev); struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); const struct intel_limit *limit; int refclk = 96000; if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { if (intel_panel_use_ssc(dev_priv)) { refclk = dev_priv->display.vbt.lvds_ssc_freq; drm_dbg_kms(&dev_priv->drm, "using SSC reference clock of %d kHz\n", refclk); } limit = &pnv_limits_lvds; } else { limit = &pnv_limits_sdvo; } if (!crtc_state->clock_set && !pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock, refclk, NULL, &crtc_state->dpll)) return -EINVAL; pnv_calc_dpll_params(refclk, &crtc_state->dpll); i9xx_compute_dpll(crtc_state, &crtc_state->dpll, &crtc_state->dpll); crtc_state->port_clock = crtc_state->dpll.dot; crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); return 0; } static int i9xx_crtc_compute_clock(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = to_i915(state->base.dev); struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); const struct intel_limit *limit; int refclk = 96000; if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { if (intel_panel_use_ssc(dev_priv)) { refclk = dev_priv->display.vbt.lvds_ssc_freq; drm_dbg_kms(&dev_priv->drm, "using SSC reference clock of %d kHz\n", refclk); } limit = &intel_limits_i9xx_lvds; } else { limit = &intel_limits_i9xx_sdvo; } if (!crtc_state->clock_set && !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock, refclk, NULL, &crtc_state->dpll)) return -EINVAL; i9xx_calc_dpll_params(refclk, &crtc_state->dpll); i9xx_compute_dpll(crtc_state, &crtc_state->dpll, &crtc_state->dpll); crtc_state->port_clock = crtc_state->dpll.dot; /* FIXME this is a mess */ if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_TVOUT)) crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); return 0; } static int i8xx_crtc_compute_clock(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = to_i915(state->base.dev); struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); const struct intel_limit *limit; int refclk = 48000; if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) { if (intel_panel_use_ssc(dev_priv)) { refclk = dev_priv->display.vbt.lvds_ssc_freq; drm_dbg_kms(&dev_priv->drm, "using SSC reference clock of %d kHz\n", refclk); } limit = &intel_limits_i8xx_lvds; } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) { limit = &intel_limits_i8xx_dvo; } else { limit = &intel_limits_i8xx_dac; } if (!crtc_state->clock_set && !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock, refclk, NULL, &crtc_state->dpll)) return -EINVAL; i9xx_calc_dpll_params(refclk, &crtc_state->dpll); i8xx_compute_dpll(crtc_state, &crtc_state->dpll, &crtc_state->dpll); crtc_state->port_clock = crtc_state->dpll.dot; crtc_state->hw.adjusted_mode.crtc_clock = intel_crtc_dotclock(crtc_state); return 0; } static const struct intel_dpll_funcs mtl_dpll_funcs = { .crtc_compute_clock = mtl_crtc_compute_clock, }; static const struct intel_dpll_funcs dg2_dpll_funcs = { .crtc_compute_clock = dg2_crtc_compute_clock, }; static const struct intel_dpll_funcs hsw_dpll_funcs = { .crtc_compute_clock = hsw_crtc_compute_clock, .crtc_get_shared_dpll = hsw_crtc_get_shared_dpll, }; static const struct intel_dpll_funcs ilk_dpll_funcs = { .crtc_compute_clock = ilk_crtc_compute_clock, .crtc_get_shared_dpll = ilk_crtc_get_shared_dpll, }; static const struct intel_dpll_funcs chv_dpll_funcs = { .crtc_compute_clock = chv_crtc_compute_clock, }; static const struct intel_dpll_funcs vlv_dpll_funcs = { .crtc_compute_clock = vlv_crtc_compute_clock, }; static const struct intel_dpll_funcs g4x_dpll_funcs = { .crtc_compute_clock = g4x_crtc_compute_clock, }; static const struct intel_dpll_funcs pnv_dpll_funcs = { .crtc_compute_clock = pnv_crtc_compute_clock, }; static const struct intel_dpll_funcs i9xx_dpll_funcs = { .crtc_compute_clock = i9xx_crtc_compute_clock, }; static const struct intel_dpll_funcs i8xx_dpll_funcs = { .crtc_compute_clock = i8xx_crtc_compute_clock, }; int intel_dpll_crtc_compute_clock(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct drm_i915_private *i915 = to_i915(state->base.dev); struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); int ret; drm_WARN_ON(&i915->drm, !intel_crtc_needs_modeset(crtc_state)); memset(&crtc_state->dpll_hw_state, 0, sizeof(crtc_state->dpll_hw_state)); if (!crtc_state->hw.enable) return 0; ret = i915->display.funcs.dpll->crtc_compute_clock(state, crtc); if (ret) { drm_dbg_kms(&i915->drm, "[CRTC:%d:%s] Couldn't calculate DPLL settings\n", crtc->base.base.id, crtc->base.name); return ret; } return 0; } int intel_dpll_crtc_get_shared_dpll(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct drm_i915_private *i915 = to_i915(state->base.dev); struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); int ret; drm_WARN_ON(&i915->drm, !intel_crtc_needs_modeset(crtc_state)); drm_WARN_ON(&i915->drm, !crtc_state->hw.enable && crtc_state->shared_dpll); if (!crtc_state->hw.enable || crtc_state->shared_dpll) return 0; if (!i915->display.funcs.dpll->crtc_get_shared_dpll) return 0; ret = i915->display.funcs.dpll->crtc_get_shared_dpll(state, crtc); if (ret) { drm_dbg_kms(&i915->drm, "[CRTC:%d:%s] Couldn't get a shared DPLL\n", crtc->base.base.id, crtc->base.name); return ret; } return 0; } void intel_dpll_init_clock_hook(struct drm_i915_private *dev_priv) { if (DISPLAY_VER(dev_priv) >= 14) dev_priv->display.funcs.dpll = &mtl_dpll_funcs; else if (IS_DG2(dev_priv)) dev_priv->display.funcs.dpll = &dg2_dpll_funcs; else if (DISPLAY_VER(dev_priv) >= 9 || HAS_DDI(dev_priv)) dev_priv->display.funcs.dpll = &hsw_dpll_funcs; else if (HAS_PCH_SPLIT(dev_priv)) dev_priv->display.funcs.dpll = &ilk_dpll_funcs; else if (IS_CHERRYVIEW(dev_priv)) dev_priv->display.funcs.dpll = &chv_dpll_funcs; else if (IS_VALLEYVIEW(dev_priv)) dev_priv->display.funcs.dpll = &vlv_dpll_funcs; else if (IS_G4X(dev_priv)) dev_priv->display.funcs.dpll = &g4x_dpll_funcs; else if (IS_PINEVIEW(dev_priv)) dev_priv->display.funcs.dpll = &pnv_dpll_funcs; else if (DISPLAY_VER(dev_priv) != 2) dev_priv->display.funcs.dpll = &i9xx_dpll_funcs; else dev_priv->display.funcs.dpll = &i8xx_dpll_funcs; } static bool i9xx_has_pps(struct drm_i915_private *dev_priv) { if (IS_I830(dev_priv)) return false; return IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv); } void i9xx_enable_pll(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); const struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; enum pipe pipe = crtc->pipe; int i; assert_transcoder_disabled(dev_priv, crtc_state->cpu_transcoder); /* PLL is protected by panel, make sure we can write it */ if (i9xx_has_pps(dev_priv)) assert_pps_unlocked(dev_priv, pipe); intel_de_write(dev_priv, FP0(pipe), hw_state->fp0); intel_de_write(dev_priv, FP1(pipe), hw_state->fp1); /* * Apparently we need to have VGA mode enabled prior to changing * the P1/P2 dividers. Otherwise the DPLL will keep using the old * dividers, even though the register value does change. */ intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll & ~DPLL_VGA_MODE_DIS); intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll); /* Wait for the clocks to stabilize. */ intel_de_posting_read(dev_priv, DPLL(pipe)); udelay(150); if (DISPLAY_VER(dev_priv) >= 4) { intel_de_write(dev_priv, DPLL_MD(pipe), hw_state->dpll_md); } else { /* The pixel multiplier can only be updated once the * DPLL is enabled and the clocks are stable. * * So write it again. */ intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll); } /* We do this three times for luck */ for (i = 0; i < 3; i++) { intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll); intel_de_posting_read(dev_priv, DPLL(pipe)); udelay(150); /* wait for warmup */ } } static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum dpio_phy phy, enum dpio_channel ch) { u32 tmp; /* * PLLB opamp always calibrates to max value of 0x3f, force enable it * and set it to a reasonable value instead. */ tmp = vlv_dpio_read(dev_priv, phy, VLV_PLL_DW17(ch)); tmp &= 0xffffff00; tmp |= 0x00000030; vlv_dpio_write(dev_priv, phy, VLV_PLL_DW17(ch), tmp); tmp = vlv_dpio_read(dev_priv, phy, VLV_REF_DW11); tmp &= 0x00ffffff; tmp |= 0x8c000000; vlv_dpio_write(dev_priv, phy, VLV_REF_DW11, tmp); tmp = vlv_dpio_read(dev_priv, phy, VLV_PLL_DW17(ch)); tmp &= 0xffffff00; vlv_dpio_write(dev_priv, phy, VLV_PLL_DW17(ch), tmp); tmp = vlv_dpio_read(dev_priv, phy, VLV_REF_DW11); tmp &= 0x00ffffff; tmp |= 0xb0000000; vlv_dpio_write(dev_priv, phy, VLV_REF_DW11, tmp); } static void vlv_prepare_pll(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); const struct dpll *clock = &crtc_state->dpll; enum dpio_channel ch = vlv_pipe_to_channel(crtc->pipe); enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe); enum pipe pipe = crtc->pipe; u32 tmp, coreclk; vlv_dpio_get(dev_priv); /* See eDP HDMI DPIO driver vbios notes doc */ /* PLL B needs special handling */ if (pipe == PIPE_B) vlv_pllb_recal_opamp(dev_priv, phy, ch); /* Set up Tx target for periodic Rcomp update */ vlv_dpio_write(dev_priv, phy, VLV_PCS_DW17_BCAST, 0x0100000f); /* Disable target IRef on PLL */ tmp = vlv_dpio_read(dev_priv, phy, VLV_PLL_DW16(ch)); tmp &= 0x00ffffff; vlv_dpio_write(dev_priv, phy, VLV_PLL_DW16(ch), tmp); /* Disable fast lock */ vlv_dpio_write(dev_priv, phy, VLV_CMN_DW0, 0x610); /* Set idtafcrecal before PLL is enabled */ tmp = DPIO_M1_DIV(clock->m1) | DPIO_M2_DIV(clock->m2) | DPIO_P1_DIV(clock->p1) | DPIO_P2_DIV(clock->p2) | DPIO_N_DIV(clock->n) | DPIO_K_DIV(1); /* * Post divider depends on pixel clock rate, DAC vs digital (and LVDS, * but we don't support that). * Note: don't use the DAC post divider as it seems unstable. */ tmp |= DPIO_S1_DIV(DPIO_S1_DIV_HDMIDP); vlv_dpio_write(dev_priv, phy, VLV_PLL_DW3(ch), tmp); tmp |= DPIO_ENABLE_CALIBRATION; vlv_dpio_write(dev_priv, phy, VLV_PLL_DW3(ch), tmp); /* Set HBR and RBR LPF coefficients */ if (crtc_state->port_clock == 162000 || intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG) || intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) vlv_dpio_write(dev_priv, phy, VLV_PLL_DW18(ch), 0x009f0003); else vlv_dpio_write(dev_priv, phy, VLV_PLL_DW18(ch), 0x00d0000f); if (intel_crtc_has_dp_encoder(crtc_state)) { /* Use SSC source */ if (pipe == PIPE_A) vlv_dpio_write(dev_priv, phy, VLV_PLL_DW5(ch), 0x0df40000); else vlv_dpio_write(dev_priv, phy, VLV_PLL_DW5(ch), 0x0df70000); } else { /* HDMI or VGA */ /* Use bend source */ if (pipe == PIPE_A) vlv_dpio_write(dev_priv, phy, VLV_PLL_DW5(ch), 0x0df70000); else vlv_dpio_write(dev_priv, phy, VLV_PLL_DW5(ch), 0x0df40000); } coreclk = vlv_dpio_read(dev_priv, phy, VLV_PLL_DW7(ch)); coreclk = (coreclk & 0x0000ff00) | 0x01c00000; if (intel_crtc_has_dp_encoder(crtc_state)) coreclk |= 0x01000000; vlv_dpio_write(dev_priv, phy, VLV_PLL_DW7(ch), coreclk); vlv_dpio_write(dev_priv, phy, VLV_PLL_DW19(ch), 0x87871000); vlv_dpio_put(dev_priv); } static void _vlv_enable_pll(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); const struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; enum pipe pipe = crtc->pipe; intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll); intel_de_posting_read(dev_priv, DPLL(pipe)); udelay(150); if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1)) drm_err(&dev_priv->drm, "DPLL %d failed to lock\n", pipe); } void vlv_enable_pll(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); const struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; enum pipe pipe = crtc->pipe; assert_transcoder_disabled(dev_priv, crtc_state->cpu_transcoder); /* PLL is protected by panel, make sure we can write it */ assert_pps_unlocked(dev_priv, pipe); /* Enable Refclk */ intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll & ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV)); if (hw_state->dpll & DPLL_VCO_ENABLE) { vlv_prepare_pll(crtc_state); _vlv_enable_pll(crtc_state); } intel_de_write(dev_priv, DPLL_MD(pipe), hw_state->dpll_md); intel_de_posting_read(dev_priv, DPLL_MD(pipe)); } static void chv_prepare_pll(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); const struct dpll *clock = &crtc_state->dpll; enum dpio_channel ch = vlv_pipe_to_channel(crtc->pipe); enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe); u32 tmp, loopfilter, tribuf_calcntr; u32 m2_frac; m2_frac = clock->m2 & 0x3fffff; vlv_dpio_get(dev_priv); /* p1 and p2 divider */ vlv_dpio_write(dev_priv, phy, CHV_CMN_DW13(ch), DPIO_CHV_S1_DIV(5) | DPIO_CHV_P1_DIV(clock->p1) | DPIO_CHV_P2_DIV(clock->p2) | DPIO_CHV_K_DIV(1)); /* Feedback post-divider - m2 */ vlv_dpio_write(dev_priv, phy, CHV_PLL_DW0(ch), DPIO_CHV_M2_DIV(clock->m2 >> 22)); /* Feedback refclk divider - n and m1 */ vlv_dpio_write(dev_priv, phy, CHV_PLL_DW1(ch), DPIO_CHV_M1_DIV(DPIO_CHV_M1_DIV_BY_2) | DPIO_CHV_N_DIV(1)); /* M2 fraction division */ vlv_dpio_write(dev_priv, phy, CHV_PLL_DW2(ch), DPIO_CHV_M2_FRAC_DIV(m2_frac)); /* M2 fraction division enable */ tmp = vlv_dpio_read(dev_priv, phy, CHV_PLL_DW3(ch)); tmp &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN); tmp |= DPIO_CHV_FEEDFWD_GAIN(2); if (m2_frac) tmp |= DPIO_CHV_FRAC_DIV_EN; vlv_dpio_write(dev_priv, phy, CHV_PLL_DW3(ch), tmp); /* Program digital lock detect threshold */ tmp = vlv_dpio_read(dev_priv, phy, CHV_PLL_DW9(ch)); tmp &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK | DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE); tmp |= DPIO_CHV_INT_LOCK_THRESHOLD(0x5); if (!m2_frac) tmp |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE; vlv_dpio_write(dev_priv, phy, CHV_PLL_DW9(ch), tmp); /* Loop filter */ if (clock->vco == 5400000) { loopfilter = DPIO_CHV_PROP_COEFF(0x3) | DPIO_CHV_INT_COEFF(0x8) | DPIO_CHV_GAIN_CTRL(0x1); tribuf_calcntr = 0x9; } else if (clock->vco <= 6200000) { loopfilter = DPIO_CHV_PROP_COEFF(0x5) | DPIO_CHV_INT_COEFF(0xB) | DPIO_CHV_GAIN_CTRL(0x3); tribuf_calcntr = 0x9; } else if (clock->vco <= 6480000) { loopfilter = DPIO_CHV_PROP_COEFF(0x4) | DPIO_CHV_INT_COEFF(0x9) | DPIO_CHV_GAIN_CTRL(0x3); tribuf_calcntr = 0x8; } else { /* Not supported. Apply the same limits as in the max case */ loopfilter = DPIO_CHV_PROP_COEFF(0x4) | DPIO_CHV_INT_COEFF(0x9) | DPIO_CHV_GAIN_CTRL(0x3); tribuf_calcntr = 0; } vlv_dpio_write(dev_priv, phy, CHV_PLL_DW6(ch), loopfilter); tmp = vlv_dpio_read(dev_priv, phy, CHV_PLL_DW8(ch)); tmp &= ~DPIO_CHV_TDC_TARGET_CNT_MASK; tmp |= DPIO_CHV_TDC_TARGET_CNT(tribuf_calcntr); vlv_dpio_write(dev_priv, phy, CHV_PLL_DW8(ch), tmp); /* AFC Recal */ vlv_dpio_write(dev_priv, phy, CHV_CMN_DW14(ch), vlv_dpio_read(dev_priv, phy, CHV_CMN_DW14(ch)) | DPIO_AFC_RECAL); vlv_dpio_put(dev_priv); } static void _chv_enable_pll(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); const struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; enum dpio_channel ch = vlv_pipe_to_channel(crtc->pipe); enum dpio_phy phy = vlv_pipe_to_phy(crtc->pipe); enum pipe pipe = crtc->pipe; u32 tmp; vlv_dpio_get(dev_priv); /* Enable back the 10bit clock to display controller */ tmp = vlv_dpio_read(dev_priv, phy, CHV_CMN_DW14(ch)); tmp |= DPIO_DCLKP_EN; vlv_dpio_write(dev_priv, phy, CHV_CMN_DW14(ch), tmp); vlv_dpio_put(dev_priv); /* * Need to wait > 100ns between dclkp clock enable bit and PLL enable. */ udelay(1); /* Enable PLL */ intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll); /* Check PLL is locked */ if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1)) drm_err(&dev_priv->drm, "PLL %d failed to lock\n", pipe); } void chv_enable_pll(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); const struct i9xx_dpll_hw_state *hw_state = &crtc_state->dpll_hw_state.i9xx; enum pipe pipe = crtc->pipe; assert_transcoder_disabled(dev_priv, crtc_state->cpu_transcoder); /* PLL is protected by panel, make sure we can write it */ assert_pps_unlocked(dev_priv, pipe); /* Enable Refclk and SSC */ intel_de_write(dev_priv, DPLL(pipe), hw_state->dpll & ~DPLL_VCO_ENABLE); if (hw_state->dpll & DPLL_VCO_ENABLE) { chv_prepare_pll(crtc_state); _chv_enable_pll(crtc_state); } if (pipe != PIPE_A) { /* * WaPixelRepeatModeFixForC0:chv * * DPLLCMD is AWOL. Use chicken bits to propagate * the value from DPLLBMD to either pipe B or C. */ intel_de_write(dev_priv, CBR4_VLV, CBR_DPLLBMD_PIPE(pipe)); intel_de_write(dev_priv, DPLL_MD(PIPE_B), hw_state->dpll_md); intel_de_write(dev_priv, CBR4_VLV, 0); dev_priv->display.state.chv_dpll_md[pipe] = hw_state->dpll_md; /* * DPLLB VGA mode also seems to cause problems. * We should always have it disabled. */ drm_WARN_ON(&dev_priv->drm, (intel_de_read(dev_priv, DPLL(PIPE_B)) & DPLL_VGA_MODE_DIS) == 0); } else { intel_de_write(dev_priv, DPLL_MD(pipe), hw_state->dpll_md); intel_de_posting_read(dev_priv, DPLL_MD(pipe)); } } /** * vlv_force_pll_on - forcibly enable just the PLL * @dev_priv: i915 private structure * @pipe: pipe PLL to enable * @dpll: PLL configuration * * Enable the PLL for @pipe using the supplied @dpll config. To be used * in cases where we need the PLL enabled even when @pipe is not going to * be enabled. */ int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe, const struct dpll *dpll) { struct intel_crtc *crtc = intel_crtc_for_pipe(dev_priv, pipe); struct intel_crtc_state *crtc_state; crtc_state = intel_crtc_state_alloc(crtc); if (!crtc_state) return -ENOMEM; crtc_state->cpu_transcoder = (enum transcoder)pipe; crtc_state->pixel_multiplier = 1; crtc_state->dpll = *dpll; crtc_state->output_types = BIT(INTEL_OUTPUT_EDP); if (IS_CHERRYVIEW(dev_priv)) { chv_compute_dpll(crtc_state); chv_enable_pll(crtc_state); } else { vlv_compute_dpll(crtc_state); vlv_enable_pll(crtc_state); } intel_crtc_destroy_state(&crtc->base, &crtc_state->uapi); return 0; } void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) { u32 val; /* Make sure the pipe isn't still relying on us */ assert_transcoder_disabled(dev_priv, (enum transcoder)pipe); val = DPLL_INTEGRATED_REF_CLK_VLV | DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; if (pipe != PIPE_A) val |= DPLL_INTEGRATED_CRI_CLK_VLV; intel_de_write(dev_priv, DPLL(pipe), val); intel_de_posting_read(dev_priv, DPLL(pipe)); } void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) { enum dpio_channel ch = vlv_pipe_to_channel(pipe); enum dpio_phy phy = vlv_pipe_to_phy(pipe); u32 val; /* Make sure the pipe isn't still relying on us */ assert_transcoder_disabled(dev_priv, (enum transcoder)pipe); val = DPLL_SSC_REF_CLK_CHV | DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; if (pipe != PIPE_A) val |= DPLL_INTEGRATED_CRI_CLK_VLV; intel_de_write(dev_priv, DPLL(pipe), val); intel_de_posting_read(dev_priv, DPLL(pipe)); vlv_dpio_get(dev_priv); /* Disable 10bit clock to display controller */ val = vlv_dpio_read(dev_priv, phy, CHV_CMN_DW14(ch)); val &= ~DPIO_DCLKP_EN; vlv_dpio_write(dev_priv, phy, CHV_CMN_DW14(ch), val); vlv_dpio_put(dev_priv); } void i9xx_disable_pll(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); enum pipe pipe = crtc->pipe; /* Don't disable pipe or pipe PLLs if needed */ if (IS_I830(dev_priv)) return; /* Make sure the pipe isn't still relying on us */ assert_transcoder_disabled(dev_priv, crtc_state->cpu_transcoder); intel_de_write(dev_priv, DPLL(pipe), DPLL_VGA_MODE_DIS); intel_de_posting_read(dev_priv, DPLL(pipe)); } /** * vlv_force_pll_off - forcibly disable just the PLL * @dev_priv: i915 private structure * @pipe: pipe PLL to disable * * Disable the PLL for @pipe. To be used in cases where we need * the PLL enabled even when @pipe is not going to be enabled. */ void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe) { if (IS_CHERRYVIEW(dev_priv)) chv_disable_pll(dev_priv, pipe); else vlv_disable_pll(dev_priv, pipe); } /* Only for pre-ILK configs */ static void assert_pll(struct drm_i915_private *dev_priv, enum pipe pipe, bool state) { bool cur_state; cur_state = intel_de_read(dev_priv, DPLL(pipe)) & DPLL_VCO_ENABLE; I915_STATE_WARN(dev_priv, cur_state != state, "PLL state assertion failure (expected %s, current %s)\n", str_on_off(state), str_on_off(cur_state)); } void assert_pll_enabled(struct drm_i915_private *i915, enum pipe pipe) { assert_pll(i915, pipe, true); } void assert_pll_disabled(struct drm_i915_private *i915, enum pipe pipe) { assert_pll(i915, pipe, false); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1