| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Paul Cercueil | 1719 | 96.30% | 1 | 14.29% |
| Christophe Branchereau | 57 | 3.19% | 2 | 28.57% |
| caihuoqing | 4 | 0.22% | 1 | 14.29% |
| Sascha Hauer | 3 | 0.17% | 1 | 14.29% |
| Uwe Kleine-König | 1 | 0.06% | 1 | 14.29% |
| Rob Herring | 1 | 0.06% | 1 | 14.29% |
| Total | 1785 | 7 |
// SPDX-License-Identifier: GPL-2.0 /* * Asia Better Technology Ltd. Y030XX067A IPS LCD panel driver * * Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net> * Copyright (C) 2020, Christophe Branchereau <cbranchereau@gmail.com> */ #include <linux/delay.h> #include <linux/device.h> #include <linux/gpio/consumer.h> #include <linux/media-bus-format.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/spi/spi.h> #include <drm/drm_modes.h> #include <drm/drm_panel.h> #define REG00_VBRT_CTRL(val) (val) #define REG01_COM_DC(val) (val) #define REG02_DA_CONTRAST(val) (val) #define REG02_VESA_SEL(val) ((val) << 5) #define REG02_COMDC_SW BIT(7) #define REG03_VPOSITION(val) (val) #define REG03_BSMOUNT BIT(5) #define REG03_COMTST BIT(6) #define REG03_HPOSITION1 BIT(7) #define REG04_HPOSITION1(val) (val) #define REG05_CLIP BIT(0) #define REG05_NVM_VREFRESH BIT(1) #define REG05_SLFR BIT(2) #define REG05_SLBRCHARGE(val) ((val) << 3) #define REG05_PRECHARGE_LEVEL(val) ((val) << 6) #define REG06_TEST5 BIT(0) #define REG06_SLDWN BIT(1) #define REG06_SLRGT BIT(2) #define REG06_TEST2 BIT(3) #define REG06_XPSAVE BIT(4) #define REG06_GAMMA_SEL(val) ((val) << 5) #define REG06_NT BIT(7) #define REG07_TEST1 BIT(0) #define REG07_HDVD_POL BIT(1) #define REG07_CK_POL BIT(2) #define REG07_TEST3 BIT(3) #define REG07_TEST4 BIT(4) #define REG07_480_LINEMASK BIT(5) #define REG07_AMPTST(val) ((val) << 6) #define REG08_SLHRC(val) (val) #define REG08_CLOCK_DIV(val) ((val) << 2) #define REG08_PANEL(val) ((val) << 5) #define REG09_SUB_BRIGHT_R(val) (val) #define REG09_NW_NB BIT(6) #define REG09_IPCON BIT(7) #define REG0A_SUB_BRIGHT_B(val) (val) #define REG0A_PAIR BIT(6) #define REG0A_DE_SEL BIT(7) #define REG0B_MBK_POSITION(val) (val) #define REG0B_HD_FREERUN BIT(4) #define REG0B_VD_FREERUN BIT(5) #define REG0B_YUV2BIN(val) ((val) << 6) #define REG0C_CONTRAST_R(val) (val) #define REG0C_DOUBLEREAD BIT(7) #define REG0D_CONTRAST_G(val) (val) #define REG0D_RGB_YUV BIT(7) #define REG0E_CONTRAST_B(val) (val) #define REG0E_PIXELCOLORDRIVE BIT(7) #define REG0F_ASPECT BIT(0) #define REG0F_OVERSCAN(val) ((val) << 1) #define REG0F_FRAMEWIDTH(val) ((val) << 3) #define REG10_BRIGHT(val) (val) #define REG11_SIG_GAIN(val) (val) #define REG11_SIGC_CNTL BIT(6) #define REG11_SIGC_POL BIT(7) #define REG12_COLOR(val) (val) #define REG12_PWCKSEL(val) ((val) << 6) #define REG13_4096LEVEL_CNTL(val) (val) #define REG13_SL4096(val) ((val) << 4) #define REG13_LIMITER_CONTROL BIT(7) #define REG14_PANEL_TEST(val) (val) #define REG15_NVM_LINK0 BIT(0) #define REG15_NVM_LINK1 BIT(1) #define REG15_NVM_LINK2 BIT(2) #define REG15_NVM_LINK3 BIT(3) #define REG15_NVM_LINK4 BIT(4) #define REG15_NVM_LINK5 BIT(5) #define REG15_NVM_LINK6 BIT(6) #define REG15_NVM_LINK7 BIT(7) struct y030xx067a_info { const struct drm_display_mode *display_modes; unsigned int num_modes; u16 width_mm, height_mm; u32 bus_format, bus_flags; }; struct y030xx067a { struct drm_panel panel; struct spi_device *spi; struct regmap *map; const struct y030xx067a_info *panel_info; struct regulator *supply; struct gpio_desc *reset_gpio; }; static inline struct y030xx067a *to_y030xx067a(struct drm_panel *panel) { return container_of(panel, struct y030xx067a, panel); } static const struct reg_sequence y030xx067a_init_sequence[] = { { 0x00, REG00_VBRT_CTRL(0x7f) }, { 0x01, REG01_COM_DC(0x3c) }, { 0x02, REG02_VESA_SEL(0x3) | REG02_DA_CONTRAST(0x1f) }, { 0x03, REG03_VPOSITION(0x0a) }, { 0x04, REG04_HPOSITION1(0xd2) }, { 0x05, REG05_CLIP | REG05_NVM_VREFRESH | REG05_SLBRCHARGE(0x2) }, { 0x06, REG06_NT }, { 0x07, 0 }, { 0x08, REG08_PANEL(0x1) | REG08_CLOCK_DIV(0x2) }, { 0x09, REG09_SUB_BRIGHT_R(0x20) }, { 0x0a, REG0A_SUB_BRIGHT_B(0x20) }, { 0x0b, REG0B_HD_FREERUN | REG0B_VD_FREERUN }, { 0x0c, REG0C_CONTRAST_R(0x00) }, { 0x0d, REG0D_CONTRAST_G(0x00) }, { 0x0e, REG0E_CONTRAST_B(0x10) }, { 0x0f, 0 }, { 0x10, REG10_BRIGHT(0x7f) }, { 0x11, REG11_SIGC_CNTL | REG11_SIG_GAIN(0x3f) }, { 0x12, REG12_COLOR(0x20) | REG12_PWCKSEL(0x1) }, { 0x13, REG13_4096LEVEL_CNTL(0x8) }, { 0x14, 0 }, { 0x15, 0 }, }; static int y030xx067a_prepare(struct drm_panel *panel) { struct y030xx067a *priv = to_y030xx067a(panel); struct device *dev = &priv->spi->dev; int err; err = regulator_enable(priv->supply); if (err) { dev_err(dev, "Failed to enable power supply: %d\n", err); return err; } /* Reset the chip */ gpiod_set_value_cansleep(priv->reset_gpio, 1); usleep_range(1000, 20000); gpiod_set_value_cansleep(priv->reset_gpio, 0); usleep_range(1000, 20000); err = regmap_multi_reg_write(priv->map, y030xx067a_init_sequence, ARRAY_SIZE(y030xx067a_init_sequence)); if (err) { dev_err(dev, "Failed to init registers: %d\n", err); goto err_disable_regulator; } return 0; err_disable_regulator: regulator_disable(priv->supply); return err; } static int y030xx067a_unprepare(struct drm_panel *panel) { struct y030xx067a *priv = to_y030xx067a(panel); gpiod_set_value_cansleep(priv->reset_gpio, 1); regulator_disable(priv->supply); return 0; } static int y030xx067a_enable(struct drm_panel *panel) { struct y030xx067a *priv = to_y030xx067a(panel); regmap_set_bits(priv->map, 0x06, REG06_XPSAVE); if (panel->backlight) { /* Wait for the picture to be ready before enabling backlight */ msleep(120); } return 0; } static int y030xx067a_disable(struct drm_panel *panel) { struct y030xx067a *priv = to_y030xx067a(panel); regmap_clear_bits(priv->map, 0x06, REG06_XPSAVE); return 0; } static int y030xx067a_get_modes(struct drm_panel *panel, struct drm_connector *connector) { struct y030xx067a *priv = to_y030xx067a(panel); const struct y030xx067a_info *panel_info = priv->panel_info; struct drm_display_mode *mode; unsigned int i; for (i = 0; i < panel_info->num_modes; i++) { mode = drm_mode_duplicate(connector->dev, &panel_info->display_modes[i]); if (!mode) return -ENOMEM; drm_mode_set_name(mode); mode->type = DRM_MODE_TYPE_DRIVER; if (panel_info->num_modes == 1) mode->type |= DRM_MODE_TYPE_PREFERRED; drm_mode_probed_add(connector, mode); } connector->display_info.bpc = 8; connector->display_info.width_mm = panel_info->width_mm; connector->display_info.height_mm = panel_info->height_mm; drm_display_info_set_bus_formats(&connector->display_info, &panel_info->bus_format, 1); connector->display_info.bus_flags = panel_info->bus_flags; return panel_info->num_modes; } static const struct drm_panel_funcs y030xx067a_funcs = { .prepare = y030xx067a_prepare, .unprepare = y030xx067a_unprepare, .enable = y030xx067a_enable, .disable = y030xx067a_disable, .get_modes = y030xx067a_get_modes, }; static const struct regmap_config y030xx067a_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = 0x15, .cache_type = REGCACHE_FLAT, }; static int y030xx067a_probe(struct spi_device *spi) { struct device *dev = &spi->dev; struct y030xx067a *priv; int err; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->spi = spi; spi_set_drvdata(spi, priv); priv->map = devm_regmap_init_spi(spi, &y030xx067a_regmap_config); if (IS_ERR(priv->map)) { dev_err(dev, "Unable to init regmap\n"); return PTR_ERR(priv->map); } priv->panel_info = of_device_get_match_data(dev); if (!priv->panel_info) return -EINVAL; priv->supply = devm_regulator_get(dev, "power"); if (IS_ERR(priv->supply)) return dev_err_probe(dev, PTR_ERR(priv->supply), "Failed to get power supply\n"); priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(priv->reset_gpio)) return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to get reset GPIO\n"); drm_panel_init(&priv->panel, dev, &y030xx067a_funcs, DRM_MODE_CONNECTOR_DPI); err = drm_panel_of_backlight(&priv->panel); if (err) return err; drm_panel_add(&priv->panel); return 0; } static void y030xx067a_remove(struct spi_device *spi) { struct y030xx067a *priv = spi_get_drvdata(spi); drm_panel_remove(&priv->panel); drm_panel_disable(&priv->panel); drm_panel_unprepare(&priv->panel); } static const struct drm_display_mode y030xx067a_modes[] = { { /* 60 Hz */ .clock = 14400, .hdisplay = 320, .hsync_start = 320 + 10, .hsync_end = 320 + 10 + 37, .htotal = 320 + 10 + 37 + 33, .vdisplay = 480, .vsync_start = 480 + 84, .vsync_end = 480 + 84 + 20, .vtotal = 480 + 84 + 20 + 16, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }, { /* 50 Hz */ .clock = 12000, .hdisplay = 320, .hsync_start = 320 + 10, .hsync_end = 320 + 10 + 37, .htotal = 320 + 10 + 37 + 33, .vdisplay = 480, .vsync_start = 480 + 84, .vsync_end = 480 + 84 + 20, .vtotal = 480 + 84 + 20 + 16, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, }, }; static const struct y030xx067a_info y030xx067a_info = { .display_modes = y030xx067a_modes, .num_modes = ARRAY_SIZE(y030xx067a_modes), .width_mm = 69, .height_mm = 51, .bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA, .bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE | DRM_BUS_FLAG_DE_LOW, }; static const struct of_device_id y030xx067a_of_match[] = { { .compatible = "abt,y030xx067a", .data = &y030xx067a_info }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, y030xx067a_of_match); static struct spi_driver y030xx067a_driver = { .driver = { .name = "abt-y030xx067a", .of_match_table = y030xx067a_of_match, }, .probe = y030xx067a_probe, .remove = y030xx067a_remove, }; module_spi_driver(y030xx067a_driver); MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1