Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Dave Airlie | 1289 | 45.10% | 6 | 8.70% |
Thomas Zimmermann | 1246 | 43.60% | 34 | 49.28% |
Robert Tarasov | 133 | 4.65% | 3 | 4.35% |
Javier Martinez Canillas | 55 | 1.92% | 1 | 1.45% |
Daniel Vetter | 37 | 1.29% | 6 | 8.70% |
Mikulas Patocka | 36 | 1.26% | 2 | 2.90% |
Takashi Iwai | 18 | 0.63% | 1 | 1.45% |
Matt Roper | 13 | 0.45% | 3 | 4.35% |
Hans de Goede | 6 | 0.21% | 2 | 2.90% |
Stéphane Marchesin | 5 | 0.17% | 1 | 1.45% |
Ville Syrjälä | 4 | 0.14% | 2 | 2.90% |
Geert Uytterhoeven | 4 | 0.14% | 1 | 1.45% |
Sam Ravnborg | 3 | 0.10% | 1 | 1.45% |
Sachin Kamat | 2 | 0.07% | 1 | 1.45% |
Dan Carpenter | 2 | 0.07% | 1 | 1.45% |
David Herrmann | 2 | 0.07% | 1 | 1.45% |
Zou Wei | 1 | 0.03% | 1 | 1.45% |
Lucas De Marchi | 1 | 0.03% | 1 | 1.45% |
Thomas Gleixner | 1 | 0.03% | 1 | 1.45% |
Total | 2858 | 69 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Red Hat * * based in parts on udlfb.c: * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it> * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com> * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com> */ #include <linux/bitfield.h> #include <drm/drm_atomic.h> #include <drm/drm_atomic_helper.h> #include <drm/drm_crtc_helper.h> #include <drm/drm_damage_helper.h> #include <drm/drm_drv.h> #include <drm/drm_edid.h> #include <drm/drm_fourcc.h> #include <drm/drm_gem_atomic_helper.h> #include <drm/drm_gem_framebuffer_helper.h> #include <drm/drm_gem_shmem_helper.h> #include <drm/drm_modeset_helper_vtables.h> #include <drm/drm_probe_helper.h> #include <drm/drm_vblank.h> #include "udl_drv.h" #include "udl_proto.h" /* * All DisplayLink bulk operations start with 0xaf (UDL_MSG_BULK), followed by * a specific command code. All operations are written to a command buffer, which * the driver sends to the device. */ static char *udl_set_register(char *buf, u8 reg, u8 val) { *buf++ = UDL_MSG_BULK; *buf++ = UDL_CMD_WRITEREG; *buf++ = reg; *buf++ = val; return buf; } static char *udl_vidreg_lock(char *buf) { return udl_set_register(buf, UDL_REG_VIDREG, UDL_VIDREG_LOCK); } static char *udl_vidreg_unlock(char *buf) { return udl_set_register(buf, UDL_REG_VIDREG, UDL_VIDREG_UNLOCK); } static char *udl_set_blank_mode(char *buf, u8 mode) { return udl_set_register(buf, UDL_REG_BLANKMODE, mode); } static char *udl_set_color_depth(char *buf, u8 selection) { return udl_set_register(buf, UDL_REG_COLORDEPTH, selection); } static char *udl_set_base16bpp(char *buf, u32 base) { /* the base pointer is 24 bits wide, 0x20 is hi byte. */ u8 reg20 = FIELD_GET(UDL_BASE_ADDR2_MASK, base); u8 reg21 = FIELD_GET(UDL_BASE_ADDR1_MASK, base); u8 reg22 = FIELD_GET(UDL_BASE_ADDR0_MASK, base); buf = udl_set_register(buf, UDL_REG_BASE16BPP_ADDR2, reg20); buf = udl_set_register(buf, UDL_REG_BASE16BPP_ADDR1, reg21); buf = udl_set_register(buf, UDL_REG_BASE16BPP_ADDR0, reg22); return buf; } /* * DisplayLink HW has separate 16bpp and 8bpp framebuffers. * In 24bpp modes, the low 323 RGB bits go in the 8bpp framebuffer */ static char *udl_set_base8bpp(char *buf, u32 base) { /* the base pointer is 24 bits wide, 0x26 is hi byte. */ u8 reg26 = FIELD_GET(UDL_BASE_ADDR2_MASK, base); u8 reg27 = FIELD_GET(UDL_BASE_ADDR1_MASK, base); u8 reg28 = FIELD_GET(UDL_BASE_ADDR0_MASK, base); buf = udl_set_register(buf, UDL_REG_BASE8BPP_ADDR2, reg26); buf = udl_set_register(buf, UDL_REG_BASE8BPP_ADDR1, reg27); buf = udl_set_register(buf, UDL_REG_BASE8BPP_ADDR0, reg28); return buf; } static char *udl_set_register_16(char *wrptr, u8 reg, u16 value) { wrptr = udl_set_register(wrptr, reg, value >> 8); return udl_set_register(wrptr, reg+1, value); } /* * This is kind of weird because the controller takes some * register values in a different byte order than other registers. */ static char *udl_set_register_16be(char *wrptr, u8 reg, u16 value) { wrptr = udl_set_register(wrptr, reg, value); return udl_set_register(wrptr, reg+1, value >> 8); } /* * LFSR is linear feedback shift register. The reason we have this is * because the display controller needs to minimize the clock depth of * various counters used in the display path. So this code reverses the * provided value into the lfsr16 value by counting backwards to get * the value that needs to be set in the hardware comparator to get the * same actual count. This makes sense once you read above a couple of * times and think about it from a hardware perspective. */ static u16 udl_lfsr16(u16 actual_count) { u32 lv = 0xFFFF; /* This is the lfsr value that the hw starts with */ while (actual_count--) { lv = ((lv << 1) | (((lv >> 15) ^ (lv >> 4) ^ (lv >> 2) ^ (lv >> 1)) & 1)) & 0xFFFF; } return (u16) lv; } /* * This does LFSR conversion on the value that is to be written. * See LFSR explanation above for more detail. */ static char *udl_set_register_lfsr16(char *wrptr, u8 reg, u16 value) { return udl_set_register_16(wrptr, reg, udl_lfsr16(value)); } /* * Takes a DRM display mode and converts it into the DisplayLink * equivalent register commands. */ static char *udl_set_display_mode(char *buf, struct drm_display_mode *mode) { u16 reg01 = mode->crtc_htotal - mode->crtc_hsync_start; u16 reg03 = reg01 + mode->crtc_hdisplay; u16 reg05 = mode->crtc_vtotal - mode->crtc_vsync_start; u16 reg07 = reg05 + mode->crtc_vdisplay; u16 reg09 = mode->crtc_htotal - 1; u16 reg0b = 1; /* libdlo hardcodes hsync start to 1 */ u16 reg0d = mode->crtc_hsync_end - mode->crtc_hsync_start + 1; u16 reg0f = mode->hdisplay; u16 reg11 = mode->crtc_vtotal; u16 reg13 = 0; /* libdlo hardcodes vsync start to 0 */ u16 reg15 = mode->crtc_vsync_end - mode->crtc_vsync_start; u16 reg17 = mode->crtc_vdisplay; u16 reg1b = mode->clock / 5; buf = udl_set_register_lfsr16(buf, UDL_REG_XDISPLAYSTART, reg01); buf = udl_set_register_lfsr16(buf, UDL_REG_XDISPLAYEND, reg03); buf = udl_set_register_lfsr16(buf, UDL_REG_YDISPLAYSTART, reg05); buf = udl_set_register_lfsr16(buf, UDL_REG_YDISPLAYEND, reg07); buf = udl_set_register_lfsr16(buf, UDL_REG_XENDCOUNT, reg09); buf = udl_set_register_lfsr16(buf, UDL_REG_HSYNCSTART, reg0b); buf = udl_set_register_lfsr16(buf, UDL_REG_HSYNCEND, reg0d); buf = udl_set_register_16(buf, UDL_REG_HPIXELS, reg0f); buf = udl_set_register_lfsr16(buf, UDL_REG_YENDCOUNT, reg11); buf = udl_set_register_lfsr16(buf, UDL_REG_VSYNCSTART, reg13); buf = udl_set_register_lfsr16(buf, UDL_REG_VSYNCEND, reg15); buf = udl_set_register_16(buf, UDL_REG_VPIXELS, reg17); buf = udl_set_register_16be(buf, UDL_REG_PIXELCLOCK5KHZ, reg1b); return buf; } static char *udl_dummy_render(char *wrptr) { *wrptr++ = UDL_MSG_BULK; *wrptr++ = UDL_CMD_WRITECOPY16; *wrptr++ = 0x00; /* from addr */ *wrptr++ = 0x00; *wrptr++ = 0x00; *wrptr++ = 0x01; /* one pixel */ *wrptr++ = 0x00; /* to address */ *wrptr++ = 0x00; *wrptr++ = 0x00; return wrptr; } static long udl_log_cpp(unsigned int cpp) { if (WARN_ON(!is_power_of_2(cpp))) return -EINVAL; return __ffs(cpp); } static int udl_handle_damage(struct drm_framebuffer *fb, const struct iosys_map *map, const struct drm_rect *clip) { struct drm_device *dev = fb->dev; void *vaddr = map->vaddr; /* TODO: Use mapping abstraction properly */ int i, ret; char *cmd; struct urb *urb; int log_bpp; ret = udl_log_cpp(fb->format->cpp[0]); if (ret < 0) return ret; log_bpp = ret; urb = udl_get_urb(dev); if (!urb) return -ENOMEM; cmd = urb->transfer_buffer; for (i = clip->y1; i < clip->y2; i++) { const int line_offset = fb->pitches[0] * i; const int byte_offset = line_offset + (clip->x1 << log_bpp); const int dev_byte_offset = (fb->width * i + clip->x1) << log_bpp; const int byte_width = drm_rect_width(clip) << log_bpp; ret = udl_render_hline(dev, log_bpp, &urb, (char *)vaddr, &cmd, byte_offset, dev_byte_offset, byte_width); if (ret) return ret; } if (cmd > (char *)urb->transfer_buffer) { /* Send partial buffer remaining before exiting */ int len; if (cmd < (char *)urb->transfer_buffer + urb->transfer_buffer_length) *cmd++ = UDL_MSG_BULK; len = cmd - (char *)urb->transfer_buffer; ret = udl_submit_urb(dev, urb, len); } else { udl_urb_completion(urb); } return 0; } /* * Primary plane */ static const uint32_t udl_primary_plane_formats[] = { DRM_FORMAT_RGB565, DRM_FORMAT_XRGB8888, }; static const uint64_t udl_primary_plane_fmtmods[] = { DRM_FORMAT_MOD_LINEAR, DRM_FORMAT_MOD_INVALID }; static int udl_primary_plane_helper_atomic_check(struct drm_plane *plane, struct drm_atomic_state *state) { struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); struct drm_crtc *new_crtc = new_plane_state->crtc; struct drm_crtc_state *new_crtc_state = NULL; if (new_crtc) new_crtc_state = drm_atomic_get_new_crtc_state(state, new_crtc); return drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, DRM_PLANE_NO_SCALING, DRM_PLANE_NO_SCALING, false, false); } static void udl_primary_plane_helper_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state) { struct drm_device *dev = plane->dev; struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); struct drm_framebuffer *fb = plane_state->fb; struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); struct drm_atomic_helper_damage_iter iter; struct drm_rect damage; int ret, idx; if (!fb) return; /* no framebuffer; plane is disabled */ ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE); if (ret) return; if (!drm_dev_enter(dev, &idx)) goto out_drm_gem_fb_end_cpu_access; drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); drm_atomic_for_each_plane_damage(&iter, &damage) { udl_handle_damage(fb, &shadow_plane_state->data[0], &damage); } drm_dev_exit(idx); out_drm_gem_fb_end_cpu_access: drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE); } static const struct drm_plane_helper_funcs udl_primary_plane_helper_funcs = { DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, .atomic_check = udl_primary_plane_helper_atomic_check, .atomic_update = udl_primary_plane_helper_atomic_update, }; static const struct drm_plane_funcs udl_primary_plane_funcs = { .update_plane = drm_atomic_helper_update_plane, .disable_plane = drm_atomic_helper_disable_plane, .destroy = drm_plane_cleanup, DRM_GEM_SHADOW_PLANE_FUNCS, }; /* * CRTC */ static void udl_crtc_helper_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state) { struct drm_device *dev = crtc->dev; struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); struct drm_display_mode *mode = &crtc_state->mode; struct urb *urb; char *buf; int idx; if (!drm_dev_enter(dev, &idx)) return; urb = udl_get_urb(dev); if (!urb) goto out; buf = (char *)urb->transfer_buffer; buf = udl_vidreg_lock(buf); buf = udl_set_color_depth(buf, UDL_COLORDEPTH_16BPP); /* set base for 16bpp segment to 0 */ buf = udl_set_base16bpp(buf, 0); /* set base for 8bpp segment to end of fb */ buf = udl_set_base8bpp(buf, 2 * mode->vdisplay * mode->hdisplay); buf = udl_set_display_mode(buf, mode); buf = udl_set_blank_mode(buf, UDL_BLANKMODE_ON); buf = udl_vidreg_unlock(buf); buf = udl_dummy_render(buf); udl_submit_urb(dev, urb, buf - (char *)urb->transfer_buffer); out: drm_dev_exit(idx); } static void udl_crtc_helper_atomic_disable(struct drm_crtc *crtc, struct drm_atomic_state *state) { struct drm_device *dev = crtc->dev; struct urb *urb; char *buf; int idx; if (!drm_dev_enter(dev, &idx)) return; urb = udl_get_urb(dev); if (!urb) goto out; buf = (char *)urb->transfer_buffer; buf = udl_vidreg_lock(buf); buf = udl_set_blank_mode(buf, UDL_BLANKMODE_POWERDOWN); buf = udl_vidreg_unlock(buf); buf = udl_dummy_render(buf); udl_submit_urb(dev, urb, buf - (char *)urb->transfer_buffer); out: drm_dev_exit(idx); } static const struct drm_crtc_helper_funcs udl_crtc_helper_funcs = { .atomic_check = drm_crtc_helper_atomic_check, .atomic_enable = udl_crtc_helper_atomic_enable, .atomic_disable = udl_crtc_helper_atomic_disable, }; static const struct drm_crtc_funcs udl_crtc_funcs = { .reset = drm_atomic_helper_crtc_reset, .destroy = drm_crtc_cleanup, .set_config = drm_atomic_helper_set_config, .page_flip = drm_atomic_helper_page_flip, .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, }; /* * Encoder */ static const struct drm_encoder_funcs udl_encoder_funcs = { .destroy = drm_encoder_cleanup, }; /* * Connector */ static int udl_connector_helper_get_modes(struct drm_connector *connector) { struct udl_connector *udl_connector = to_udl_connector(connector); drm_connector_update_edid_property(connector, udl_connector->edid); if (udl_connector->edid) return drm_add_edid_modes(connector, udl_connector->edid); return 0; } static const struct drm_connector_helper_funcs udl_connector_helper_funcs = { .get_modes = udl_connector_helper_get_modes, }; static int udl_get_edid_block(void *data, u8 *buf, unsigned int block, size_t len) { struct udl_device *udl = data; struct drm_device *dev = &udl->drm; struct usb_device *udev = udl_to_usb_device(udl); u8 *read_buff; int ret; size_t i; read_buff = kmalloc(2, GFP_KERNEL); if (!read_buff) return -ENOMEM; for (i = 0; i < len; i++) { int bval = (i + block * EDID_LENGTH) << 8; ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x02, (0x80 | (0x02 << 5)), bval, 0xA1, read_buff, 2, USB_CTRL_GET_TIMEOUT); if (ret < 0) { drm_err(dev, "Read EDID byte %zu failed err %x\n", i, ret); goto err_kfree; } else if (ret < 1) { ret = -EIO; drm_err(dev, "Read EDID byte %zu failed\n", i); goto err_kfree; } buf[i] = read_buff[1]; } kfree(read_buff); return 0; err_kfree: kfree(read_buff); return ret; } static enum drm_connector_status udl_connector_detect(struct drm_connector *connector, bool force) { struct drm_device *dev = connector->dev; struct udl_device *udl = to_udl(dev); struct udl_connector *udl_connector = to_udl_connector(connector); enum drm_connector_status status = connector_status_disconnected; int idx; /* cleanup previous EDID */ kfree(udl_connector->edid); udl_connector->edid = NULL; if (!drm_dev_enter(dev, &idx)) return connector_status_disconnected; udl_connector->edid = drm_do_get_edid(connector, udl_get_edid_block, udl); if (udl_connector->edid) status = connector_status_connected; drm_dev_exit(idx); return status; } static void udl_connector_destroy(struct drm_connector *connector) { struct udl_connector *udl_connector = to_udl_connector(connector); drm_connector_cleanup(connector); kfree(udl_connector->edid); kfree(udl_connector); } static const struct drm_connector_funcs udl_connector_funcs = { .reset = drm_atomic_helper_connector_reset, .detect = udl_connector_detect, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = udl_connector_destroy, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, }; struct drm_connector *udl_connector_init(struct drm_device *dev) { struct udl_connector *udl_connector; struct drm_connector *connector; int ret; udl_connector = kzalloc(sizeof(*udl_connector), GFP_KERNEL); if (!udl_connector) return ERR_PTR(-ENOMEM); connector = &udl_connector->connector; ret = drm_connector_init(dev, connector, &udl_connector_funcs, DRM_MODE_CONNECTOR_VGA); if (ret) goto err_kfree; drm_connector_helper_add(connector, &udl_connector_helper_funcs); connector->polled = DRM_CONNECTOR_POLL_HPD | DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; return connector; err_kfree: kfree(udl_connector); return ERR_PTR(ret); } /* * Modesetting */ static enum drm_mode_status udl_mode_config_mode_valid(struct drm_device *dev, const struct drm_display_mode *mode) { struct udl_device *udl = to_udl(dev); if (udl->sku_pixel_limit) { if (mode->vdisplay * mode->hdisplay > udl->sku_pixel_limit) return MODE_MEM; } return MODE_OK; } static const struct drm_mode_config_funcs udl_mode_config_funcs = { .fb_create = drm_gem_fb_create_with_dirty, .mode_valid = udl_mode_config_mode_valid, .atomic_check = drm_atomic_helper_check, .atomic_commit = drm_atomic_helper_commit, }; int udl_modeset_init(struct drm_device *dev) { struct udl_device *udl = to_udl(dev); struct drm_plane *primary_plane; struct drm_crtc *crtc; struct drm_encoder *encoder; struct drm_connector *connector; int ret; ret = drmm_mode_config_init(dev); if (ret) return ret; dev->mode_config.min_width = 640; dev->mode_config.min_height = 480; dev->mode_config.max_width = 2048; dev->mode_config.max_height = 2048; dev->mode_config.preferred_depth = 16; dev->mode_config.funcs = &udl_mode_config_funcs; primary_plane = &udl->primary_plane; ret = drm_universal_plane_init(dev, primary_plane, 0, &udl_primary_plane_funcs, udl_primary_plane_formats, ARRAY_SIZE(udl_primary_plane_formats), udl_primary_plane_fmtmods, DRM_PLANE_TYPE_PRIMARY, NULL); if (ret) return ret; drm_plane_helper_add(primary_plane, &udl_primary_plane_helper_funcs); drm_plane_enable_fb_damage_clips(primary_plane); crtc = &udl->crtc; ret = drm_crtc_init_with_planes(dev, crtc, primary_plane, NULL, &udl_crtc_funcs, NULL); if (ret) return ret; drm_crtc_helper_add(crtc, &udl_crtc_helper_funcs); encoder = &udl->encoder; ret = drm_encoder_init(dev, encoder, &udl_encoder_funcs, DRM_MODE_ENCODER_DAC, NULL); if (ret) return ret; encoder->possible_crtcs = drm_crtc_mask(crtc); connector = udl_connector_init(dev); if (IS_ERR(connector)) return PTR_ERR(connector); ret = drm_connector_attach_encoder(connector, encoder); if (ret) return ret; drm_mode_config_reset(dev); return 0; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1