| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Benjamin Tissoires | 1945 | 100.00% | 1 | 100.00% |
| Total | 1945 | 1 |
// SPDX-License-Identifier: GPL-2.0-only /* Copyright (c) 2023 Benjamin Tissoires */ #include "vmlinux.h" #include "hid_bpf.h" #include "hid_bpf_helpers.h" #include <bpf/bpf_tracing.h> #define VID_UGEE 0x28BD /* VID is shared with SinoWealth and Glorious and prob others */ #define PID_ARTIST_PRO14_GEN2 0x095A #define PID_ARTIST_PRO16_GEN2 0x095B HID_BPF_CONFIG( HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, VID_UGEE, PID_ARTIST_PRO14_GEN2), HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, VID_UGEE, PID_ARTIST_PRO16_GEN2) ); /* * We need to amend the report descriptor for the following: * - the device reports Eraser instead of using Secondary Barrel Switch * - when the eraser button is pressed and the stylus is touching the tablet, * the device sends Tip Switch instead of sending Eraser * * This descriptor uses physical dimensions of the 16" device. */ static const __u8 fixed_rdesc[] = { 0x05, 0x0d, // Usage Page (Digitizers) 0 0x09, 0x02, // Usage (Pen) 2 0xa1, 0x01, // Collection (Application) 4 0x85, 0x07, // Report ID (7) 6 0x09, 0x20, // Usage (Stylus) 8 0xa1, 0x00, // Collection (Physical) 10 0x09, 0x42, // Usage (Tip Switch) 12 0x09, 0x44, // Usage (Barrel Switch) 14 0x09, 0x5a, // Usage (Secondary Barrel Switch) 16 /* changed from 0x45 (Eraser) to 0x5a (Secondary Barrel Switch) */ 0x09, 0x3c, // Usage (Invert) 18 0x09, 0x45, // Usage (Eraser) 16 /* created over a padding bit at offset 29-33 */ 0x15, 0x00, // Logical Minimum (0) 20 0x25, 0x01, // Logical Maximum (1) 22 0x75, 0x01, // Report Size (1) 24 0x95, 0x05, // Report Count (5) 26 /* changed from 4 to 5 */ 0x81, 0x02, // Input (Data,Var,Abs) 28 0x09, 0x32, // Usage (In Range) 34 0x15, 0x00, // Logical Minimum (0) 36 0x25, 0x01, // Logical Maximum (1) 38 0x95, 0x01, // Report Count (1) 40 0x81, 0x02, // Input (Data,Var,Abs) 42 0x95, 0x02, // Report Count (2) 44 0x81, 0x03, // Input (Cnst,Var,Abs) 46 0x75, 0x10, // Report Size (16) 48 0x95, 0x01, // Report Count (1) 50 0x35, 0x00, // Physical Minimum (0) 52 0xa4, // Push 54 0x05, 0x01, // Usage Page (Generic Desktop) 55 0x09, 0x30, // Usage (X) 57 0x65, 0x13, // Unit (EnglishLinear: in) 59 0x55, 0x0d, // Unit Exponent (-3) 61 0x46, 0xff, 0x34, // Physical Maximum (13567) 63 0x26, 0xff, 0x7f, // Logical Maximum (32767) 66 0x81, 0x02, // Input (Data,Var,Abs) 69 0x09, 0x31, // Usage (Y) 71 0x46, 0x20, 0x21, // Physical Maximum (8480) 73 0x26, 0xff, 0x7f, // Logical Maximum (32767) 76 0x81, 0x02, // Input (Data,Var,Abs) 79 0xb4, // Pop 81 0x09, 0x30, // Usage (Tip Pressure) 82 0x45, 0x00, // Physical Maximum (0) 84 0x26, 0xff, 0x3f, // Logical Maximum (16383) 86 0x81, 0x42, // Input (Data,Var,Abs,Null) 89 0x09, 0x3d, // Usage (X Tilt) 91 0x15, 0x81, // Logical Minimum (-127) 93 0x25, 0x7f, // Logical Maximum (127) 95 0x75, 0x08, // Report Size (8) 97 0x95, 0x01, // Report Count (1) 99 0x81, 0x02, // Input (Data,Var,Abs) 101 0x09, 0x3e, // Usage (Y Tilt) 103 0x15, 0x81, // Logical Minimum (-127) 105 0x25, 0x7f, // Logical Maximum (127) 107 0x81, 0x02, // Input (Data,Var,Abs) 109 0xc0, // End Collection 111 0xc0, // End Collection 112 }; SEC("fmod_ret/hid_bpf_rdesc_fixup") int BPF_PROG(hid_fix_rdesc_xppen_artistpro16gen2, struct hid_bpf_ctx *hctx) { __u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, 4096 /* size */); if (!data) return 0; /* EPERM check */ __builtin_memcpy(data, fixed_rdesc, sizeof(fixed_rdesc)); /* Fix the Physical maximum values for different sizes of the device * The 14" screen device descriptor size is 11.874" x 7.421" */ if (hctx->hid->product == PID_ARTIST_PRO14_GEN2) { data[63] = 0x2e; data[62] = 0x62; data[73] = 0x1c; data[72] = 0xfd; } return sizeof(fixed_rdesc); } SEC("fmod_ret/hid_bpf_device_event") int BPF_PROG(xppen_16_fix_eraser, struct hid_bpf_ctx *hctx) { __u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, 10 /* size */); if (!data) return 0; /* EPERM check */ if ((data[1] & 0x29) != 0x29) /* tip switch=1 invert=1 inrange=1 */ return 0; /* xor bits 0,3 and 4: convert Tip Switch + Invert into Eraser only */ data[1] ^= 0x19; return 0; } /* * Static coordinate offset table based on positive only angles * Two tables are needed, because the logical coordinates are scaled * * The table can be generated by Python like this: * >>> full_scale = 11.874 # the display width/height in inches * >>> tip_height = 0.055677699 # the center of the pen coil distance from screen in inch (empirical) * >>> h = tip_height * (32767 / full_scale) # height of the coil in logical coordinates * >>> [round(h*math.sin(math.radians(d))) for d in range(0, 128)] * [0, 13, 26, ....] */ /* 14" inch screen 11.874" x 7.421" */ static const __u16 angle_offsets_horizontal_14[128] = { 0, 3, 5, 8, 11, 13, 16, 19, 21, 24, 27, 29, 32, 35, 37, 40, 42, 45, 47, 50, 53, 55, 58, 60, 62, 65, 67, 70, 72, 74, 77, 79, 81, 84, 86, 88, 90, 92, 95, 97, 99, 101, 103, 105, 107, 109, 111, 112, 114, 116, 118, 119, 121, 123, 124, 126, 127, 129, 130, 132, 133, 134, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 148, 149, 150, 150, 151, 151, 152, 152, 153, 153, 153, 153, 153, 154, 154, 154, 154, 154, 153, 153, 153, 153, 153, 152, 152, 151, 151, 150, 150, 149, 148, 148, 147, 146, 145, 144, 143, 142, 141, 140, 139, 138, 137, 136, 134, 133, 132, 130, 129, 127, 126, 124, 123 }; static const __u16 angle_offsets_vertical_14[128] = { 0, 4, 9, 13, 17, 21, 26, 30, 34, 38, 43, 47, 51, 55, 59, 64, 68, 72, 76, 80, 84, 88, 92, 96, 100, 104, 108, 112, 115, 119, 123, 127, 130, 134, 137, 141, 145, 148, 151, 155, 158, 161, 165, 168, 171, 174, 177, 180, 183, 186, 188, 191, 194, 196, 199, 201, 204, 206, 208, 211, 213, 215, 217, 219, 221, 223, 225, 226, 228, 230, 231, 232, 234, 235, 236, 237, 239, 240, 240, 241, 242, 243, 243, 244, 244, 245, 245, 246, 246, 246, 246, 246, 246, 246, 245, 245, 244, 244, 243, 243, 242, 241, 240, 240, 239, 237, 236, 235, 234, 232, 231, 230, 228, 226, 225, 223, 221, 219, 217, 215, 213, 211, 208, 206, 204, 201, 199, 196 }; /* 16" inch screen 13.567" x 8.480" */ static const __u16 angle_offsets_horizontal_16[128] = { 0, 2, 5, 7, 9, 12, 14, 16, 19, 21, 23, 26, 28, 30, 33, 35, 37, 39, 42, 44, 46, 48, 50, 53, 55, 57, 59, 61, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 86, 88, 90, 92, 93, 95, 97, 98, 100, 101, 103, 105, 106, 107, 109, 110, 111, 113, 114, 115, 116, 118, 119, 120, 121, 122, 123, 124, 125, 126, 126, 127, 128, 129, 129, 130, 130, 131, 132, 132, 132, 133, 133, 133, 134, 134, 134, 134, 134, 134, 134, 134, 134, 134, 134, 134, 134, 133, 133, 133, 132, 132, 132, 131, 130, 130, 129, 129, 128, 127, 126, 126, 125, 124, 123, 122, 121, 120, 119, 118, 116, 115, 114, 113, 111, 110, 109, 107 }; static const __u16 angle_offsets_vertical_16[128] = { 0, 4, 8, 11, 15, 19, 22, 26, 30, 34, 37, 41, 45, 48, 52, 56, 59, 63, 66, 70, 74, 77, 81, 84, 88, 91, 94, 98, 101, 104, 108, 111, 114, 117, 120, 123, 126, 129, 132, 135, 138, 141, 144, 147, 149, 152, 155, 157, 160, 162, 165, 167, 170, 172, 174, 176, 178, 180, 182, 184, 186, 188, 190, 192, 193, 195, 197, 198, 199, 201, 202, 203, 205, 206, 207, 208, 209, 210, 210, 211, 212, 212, 213, 214, 214, 214, 215, 215, 215, 215, 215, 215, 215, 215, 215, 214, 214, 214, 213, 212, 212, 211, 210, 210, 209, 208, 207, 206, 205, 203, 202, 201, 199, 198, 197, 195, 193, 192, 190, 188, 186, 184, 182, 180, 178, 176, 174, 172 }; static void compensate_coordinates_by_tilt(__u8 *data, const __u8 idx, const __s8 tilt, const __u16 (*compensation_table)[128]) { __u16 coords = data[idx+1]; coords <<= 8; coords += data[idx]; __u8 direction = tilt > 0 ? 0 : 1; /* Positive tilt means we need to subtract the compensation (vs. negative angle where we need to add) */ __u8 angle = tilt > 0 ? tilt : -tilt; if (angle > 127) return; __u16 compensation = (*compensation_table)[angle]; if (direction == 0) { coords = (coords > compensation) ? coords - compensation : 0; } else { const __u16 logical_maximum = 32767; __u16 max = logical_maximum - compensation; coords = (coords < max) ? coords + compensation : logical_maximum; } data[idx] = coords & 0xff; data[idx+1] = coords >> 8; } SEC("fmod_ret/hid_bpf_device_event") int BPF_PROG(xppen_16_fix_angle_offset, struct hid_bpf_ctx *hctx) { __u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, 10 /* size */); if (!data) return 0; /* EPERM check */ /* * Compensate X and Y offset caused by tilt. * * The magnetic center moves when the pen is tilted, because the coil * is not touching the screen. * * a (tilt angle) * | /... h (coil distance from tip) * | / * |/______ * |x (position offset) * * x = sin a * h * * Subtract the offset from the coordinates. Use the precomputed table! * * bytes 0 - report id * 1 - buttons * 2-3 - X coords (logical) * 4-5 - Y coords * 6-7 - pressure (ignore) * 8 - tilt X * 9 - tilt Y */ __s8 tilt_x = (__s8) data[8]; __s8 tilt_y = (__s8) data[9]; if (hctx->hid->product == PID_ARTIST_PRO14_GEN2) { compensate_coordinates_by_tilt(data, 2, tilt_x, &angle_offsets_horizontal_14); compensate_coordinates_by_tilt(data, 4, tilt_y, &angle_offsets_vertical_14); } else if (hctx->hid->product == PID_ARTIST_PRO16_GEN2) { compensate_coordinates_by_tilt(data, 2, tilt_x, &angle_offsets_horizontal_16); compensate_coordinates_by_tilt(data, 4, tilt_y, &angle_offsets_vertical_16); } return 0; } SEC("syscall") int probe(struct hid_bpf_probe_args *ctx) { /* * The device exports 3 interfaces. */ ctx->retval = ctx->rdesc_size != 113; if (ctx->retval) ctx->retval = -EINVAL; /* ensure the kernel isn't fixed already */ if (ctx->rdesc[17] != 0x45) /* Eraser */ ctx->retval = -EINVAL; return 0; } char _license[] SEC("license") = "GPL";
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1