Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Srinivas Pandruvada | 597 | 92.27% | 2 | 22.22% |
Zhang Lixu | 38 | 5.87% | 2 | 22.22% |
Even Xu | 4 | 0.62% | 1 | 11.11% |
Hong Liu | 3 | 0.46% | 1 | 11.11% |
Lee Jones | 2 | 0.31% | 1 | 11.11% |
Thomas Gleixner | 2 | 0.31% | 1 | 11.11% |
Gustavo A. R. Silva | 1 | 0.15% | 1 | 11.11% |
Total | 647 | 9 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Most ISHTP provider device and ISHTP logic declarations * * Copyright (c) 2003-2016, Intel Corporation. */ #ifndef _ISHTP_DEV_H_ #define _ISHTP_DEV_H_ #include <linux/types.h> #include <linux/spinlock.h> #include <linux/intel-ish-client-if.h> #include "bus.h" #include "hbm.h" #define IPC_PAYLOAD_SIZE 128 #define ISHTP_RD_MSG_BUF_SIZE IPC_PAYLOAD_SIZE #define IPC_FULL_MSG_SIZE 132 /* Number of messages to be held in ISR->BH FIFO */ #define RD_INT_FIFO_SIZE 64 /* * Number of IPC messages to be held in Tx FIFO, to be sent by ISR - * Tx complete interrupt or RX_COMPLETE handler */ #define IPC_TX_FIFO_SIZE 512 /* * Number of Maximum ISHTP Clients */ #define ISHTP_CLIENTS_MAX 256 /* * Number of File descriptors/handles * that can be opened to the driver. * * Limit to 255: 256 Total Clients * minus internal client for ISHTP Bus Messages */ #define ISHTP_MAX_OPEN_HANDLE_COUNT (ISHTP_CLIENTS_MAX - 1) /* Internal Clients Number */ #define ISHTP_HOST_CLIENT_ID_ANY (-1) #define ISHTP_HBM_HOST_CLIENT_ID 0 #define MAX_DMA_DELAY 20 /* ISHTP device states */ enum ishtp_dev_state { ISHTP_DEV_INITIALIZING = 0, ISHTP_DEV_INIT_CLIENTS, ISHTP_DEV_ENABLED, ISHTP_DEV_RESETTING, ISHTP_DEV_DISABLED, ISHTP_DEV_POWER_DOWN, ISHTP_DEV_POWER_UP }; const char *ishtp_dev_state_str(int state); struct ishtp_cl; /** * struct ishtp_fw_client - representation of fw client * * @props - client properties * @client_id - fw client id */ struct ishtp_fw_client { struct ishtp_client_properties props; uint8_t client_id; }; /* * Control info for IPC messages ISHTP/IPC sending FIFO - * list with inline data buffer * This structure will be filled with parameters submitted * by the caller glue layer * 'buf' may be pointing to the external buffer or to 'inline_data' * 'offset' will be initialized to 0 by submitting * * 'ipc_send_compl' is intended for use by clients that send fragmented * messages. When a fragment is sent down to IPC msg regs, * it will be called. * If it has more fragments to send, it will do it. With last fragment * it will send appropriate ISHTP "message-complete" flag. * It will remove the outstanding message * (mark outstanding buffer as available). * If counting flow control is in work and there are more flow control * credits, it can put the next client message queued in cl. * structure for IPC processing. * */ struct wr_msg_ctl_info { /* Will be called with 'ipc_send_compl_prm' as parameter */ void (*ipc_send_compl)(void *); void *ipc_send_compl_prm; size_t length; struct list_head link; unsigned char inline_data[IPC_FULL_MSG_SIZE]; }; /* * The ISHTP layer talks to hardware IPC message using the following * callbacks */ struct ishtp_hw_ops { int (*hw_reset)(struct ishtp_device *dev); int (*ipc_reset)(struct ishtp_device *dev); uint32_t (*ipc_get_header)(struct ishtp_device *dev, int length, int busy); int (*write)(struct ishtp_device *dev, void (*ipc_send_compl)(void *), void *ipc_send_compl_prm, unsigned char *msg, int length); uint32_t (*ishtp_read_hdr)(const struct ishtp_device *dev); int (*ishtp_read)(struct ishtp_device *dev, unsigned char *buffer, unsigned long buffer_length); uint32_t (*get_fw_status)(struct ishtp_device *dev); void (*sync_fw_clock)(struct ishtp_device *dev); bool (*dma_no_cache_snooping)(struct ishtp_device *dev); }; /** * struct ishtp_driver_data - Driver-specific data for ISHTP devices * * This structure holds driver-specific data that can be associated with each * ISHTP device instance. It allows for the storage of data that is unique to * a particular driver or hardware variant. * * @fw_filename: The firmware filename associated with a specific hardware * variant of the Intel Integrated Sensor Hub (ISH). This allows * the driver to load the correct firmware based on the device's * hardware variant. */ struct ishtp_driver_data { char *fw_filename; }; /** * struct ishtp_device - ISHTP private device struct */ struct ishtp_device { struct device *devc; /* pointer to lowest device */ struct pci_dev *pdev; /* PCI device to get device ids */ struct ishtp_driver_data *driver_data; /* pointer to driver-specific data */ /* waitq for waiting for suspend response */ wait_queue_head_t suspend_wait; bool suspend_flag; /* Suspend is active */ /* waitq for waiting for resume response */ wait_queue_head_t resume_wait; bool resume_flag; /*Resume is active */ /* * lock for the device, for everything that doesn't have * a dedicated spinlock */ spinlock_t device_lock; bool recvd_hw_ready; struct hbm_version version; int transfer_path; /* Choice of transfer path: IPC or DMA */ /* work structure for scheduling firmware loading tasks */ struct work_struct work_fw_loader; /* waitq for waiting for command response from the firmware loader */ wait_queue_head_t wait_loader_recvd_msg; /* indicating whether a message from the firmware loader has been received */ bool fw_loader_received; /* pointer to a buffer for receiving messages from the firmware loader */ void *fw_loader_rx_buf; /* size of the buffer pointed to by fw_loader_rx_buf */ int fw_loader_rx_size; /* ishtp device states */ enum ishtp_dev_state dev_state; enum ishtp_hbm_state hbm_state; /* driver read queue */ struct ishtp_cl_rb read_list; spinlock_t read_list_spinlock; /* list of ishtp_cl's */ struct list_head cl_list; spinlock_t cl_list_lock; long open_handle_count; /* List of bus devices */ struct list_head device_list; spinlock_t device_list_lock; /* waiting queues for receive message from FW */ wait_queue_head_t wait_hw_ready; wait_queue_head_t wait_hbm_recvd_msg; /* FIFO for input messages for BH processing */ unsigned char rd_msg_fifo[RD_INT_FIFO_SIZE * IPC_PAYLOAD_SIZE]; unsigned int rd_msg_fifo_head, rd_msg_fifo_tail; spinlock_t rd_msg_spinlock; struct work_struct bh_hbm_work; /* IPC write queue */ struct list_head wr_processing_list, wr_free_list; /* For both processing list and free list */ spinlock_t wr_processing_spinlock; struct ishtp_fw_client *fw_clients; /*Note:memory has to be allocated*/ DECLARE_BITMAP(fw_clients_map, ISHTP_CLIENTS_MAX); DECLARE_BITMAP(host_clients_map, ISHTP_CLIENTS_MAX); uint8_t fw_clients_num; uint8_t fw_client_presentation_num; uint8_t fw_client_index; spinlock_t fw_clients_lock; /* TX DMA buffers and slots */ int ishtp_host_dma_enabled; void *ishtp_host_dma_tx_buf; unsigned int ishtp_host_dma_tx_buf_size; uint64_t ishtp_host_dma_tx_buf_phys; int ishtp_dma_num_slots; /* map of 4k blocks in Tx dma buf: 0-free, 1-used */ uint8_t *ishtp_dma_tx_map; spinlock_t ishtp_dma_tx_lock; /* RX DMA buffers and slots */ void *ishtp_host_dma_rx_buf; unsigned int ishtp_host_dma_rx_buf_size; uint64_t ishtp_host_dma_rx_buf_phys; /* Dump to trace buffers if enabled*/ ishtp_print_log print_log; /* Debug stats */ unsigned int ipc_rx_cnt; unsigned long long ipc_rx_bytes_cnt; unsigned int ipc_tx_cnt; unsigned long long ipc_tx_bytes_cnt; const struct ishtp_hw_ops *ops; size_t mtu; uint32_t ishtp_msg_hdr; char hw[] __aligned(sizeof(void *)); }; static inline unsigned long ishtp_secs_to_jiffies(unsigned long sec) { return msecs_to_jiffies(sec * MSEC_PER_SEC); } /* * Register Access Function */ static inline int ish_ipc_reset(struct ishtp_device *dev) { return dev->ops->ipc_reset(dev); } /* Exported function */ void ishtp_device_init(struct ishtp_device *dev); int ishtp_start(struct ishtp_device *dev); #endif /*_ISHTP_DEV_H_*/
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1