Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Vlad Dogaru | 2324 | 89.52% | 2 | 11.11% |
Irina Tirdea | 209 | 8.05% | 2 | 11.11% |
Daniel Baluta | 14 | 0.54% | 1 | 5.56% |
Uwe Kleine-König | 12 | 0.46% | 4 | 22.22% |
Jonathan Cameron | 11 | 0.42% | 3 | 16.67% |
Adriana Reus | 9 | 0.35% | 1 | 5.56% |
Roberta Dobrescu | 6 | 0.23% | 1 | 5.56% |
Miaoqian Lin | 5 | 0.19% | 1 | 5.56% |
Grégor Boirie | 3 | 0.12% | 1 | 5.56% |
Thomas Gleixner | 2 | 0.08% | 1 | 5.56% |
Andy Shevchenko | 1 | 0.04% | 1 | 5.56% |
Total | 2596 | 18 |
// SPDX-License-Identifier: GPL-2.0-only /* * Freescale MMA9551L Intelligent Motion-Sensing Platform driver * Copyright (c) 2014, Intel Corporation. */ #include <linux/module.h> #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/acpi.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/events.h> #include <linux/pm_runtime.h> #include "mma9551_core.h" #define MMA9551_DRV_NAME "mma9551" #define MMA9551_IRQ_NAME "mma9551_event" #define MMA9551_GPIO_COUNT 4 /* Tilt application (inclination in IIO terms). */ #define MMA9551_TILT_XZ_ANG_REG 0x00 #define MMA9551_TILT_YZ_ANG_REG 0x01 #define MMA9551_TILT_XY_ANG_REG 0x02 #define MMA9551_TILT_ANGFLG BIT(7) #define MMA9551_TILT_QUAD_REG 0x03 #define MMA9551_TILT_XY_QUAD_SHIFT 0 #define MMA9551_TILT_YZ_QUAD_SHIFT 2 #define MMA9551_TILT_XZ_QUAD_SHIFT 4 #define MMA9551_TILT_CFG_REG 0x01 #define MMA9551_TILT_ANG_THRESH_MASK GENMASK(3, 0) #define MMA9551_DEFAULT_SAMPLE_RATE 122 /* Hz */ /* Tilt events are mapped to the first three GPIO pins. */ enum mma9551_tilt_axis { mma9551_x = 0, mma9551_y, mma9551_z, }; struct mma9551_data { struct i2c_client *client; struct mutex mutex; int event_enabled[3]; int irqs[MMA9551_GPIO_COUNT]; }; static int mma9551_read_incli_chan(struct i2c_client *client, const struct iio_chan_spec *chan, int *val) { u8 quad_shift, angle, quadrant; u16 reg_addr; int ret; switch (chan->channel2) { case IIO_MOD_X: reg_addr = MMA9551_TILT_YZ_ANG_REG; quad_shift = MMA9551_TILT_YZ_QUAD_SHIFT; break; case IIO_MOD_Y: reg_addr = MMA9551_TILT_XZ_ANG_REG; quad_shift = MMA9551_TILT_XZ_QUAD_SHIFT; break; case IIO_MOD_Z: reg_addr = MMA9551_TILT_XY_ANG_REG; quad_shift = MMA9551_TILT_XY_QUAD_SHIFT; break; default: return -EINVAL; } ret = mma9551_set_power_state(client, true); if (ret < 0) return ret; ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT, reg_addr, &angle); if (ret < 0) goto out_poweroff; ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT, MMA9551_TILT_QUAD_REG, &quadrant); if (ret < 0) goto out_poweroff; angle &= ~MMA9551_TILT_ANGFLG; quadrant = (quadrant >> quad_shift) & 0x03; if (quadrant == 1 || quadrant == 3) *val = 90 * (quadrant + 1) - angle; else *val = angle + 90 * quadrant; ret = IIO_VAL_INT; out_poweroff: mma9551_set_power_state(client, false); return ret; } static int mma9551_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct mma9551_data *data = iio_priv(indio_dev); int ret; switch (mask) { case IIO_CHAN_INFO_PROCESSED: switch (chan->type) { case IIO_INCLI: mutex_lock(&data->mutex); ret = mma9551_read_incli_chan(data->client, chan, val); mutex_unlock(&data->mutex); return ret; default: return -EINVAL; } case IIO_CHAN_INFO_RAW: switch (chan->type) { case IIO_ACCEL: mutex_lock(&data->mutex); ret = mma9551_read_accel_chan(data->client, chan, val, val2); mutex_unlock(&data->mutex); return ret; default: return -EINVAL; } case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_ACCEL: return mma9551_read_accel_scale(val, val2); default: return -EINVAL; } default: return -EINVAL; } } static int mma9551_read_event_config(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir) { struct mma9551_data *data = iio_priv(indio_dev); switch (chan->type) { case IIO_INCLI: /* IIO counts axes from 1, because IIO_NO_MOD is 0. */ return data->event_enabled[chan->channel2 - 1]; default: return -EINVAL; } } static int mma9551_config_incli_event(struct iio_dev *indio_dev, enum iio_modifier axis, int state) { struct mma9551_data *data = iio_priv(indio_dev); enum mma9551_tilt_axis mma_axis; int ret; /* IIO counts axes from 1, because IIO_NO_MOD is 0. */ mma_axis = axis - 1; if (data->event_enabled[mma_axis] == state) return 0; if (state == 0) { ret = mma9551_gpio_config(data->client, (enum mma9551_gpio_pin)mma_axis, MMA9551_APPID_NONE, 0, 0); if (ret < 0) return ret; ret = mma9551_set_power_state(data->client, false); if (ret < 0) return ret; } else { int bitnum; /* Bit 7 of each angle register holds the angle flag. */ switch (axis) { case IIO_MOD_X: bitnum = 7 + 8 * MMA9551_TILT_YZ_ANG_REG; break; case IIO_MOD_Y: bitnum = 7 + 8 * MMA9551_TILT_XZ_ANG_REG; break; case IIO_MOD_Z: bitnum = 7 + 8 * MMA9551_TILT_XY_ANG_REG; break; default: return -EINVAL; } ret = mma9551_set_power_state(data->client, true); if (ret < 0) return ret; ret = mma9551_gpio_config(data->client, (enum mma9551_gpio_pin)mma_axis, MMA9551_APPID_TILT, bitnum, 0); if (ret < 0) { mma9551_set_power_state(data->client, false); return ret; } } data->event_enabled[mma_axis] = state; return ret; } static int mma9551_write_event_config(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir, int state) { struct mma9551_data *data = iio_priv(indio_dev); int ret; switch (chan->type) { case IIO_INCLI: mutex_lock(&data->mutex); ret = mma9551_config_incli_event(indio_dev, chan->channel2, state); mutex_unlock(&data->mutex); return ret; default: return -EINVAL; } } static int mma9551_write_event_value(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir, enum iio_event_info info, int val, int val2) { struct mma9551_data *data = iio_priv(indio_dev); int ret; switch (chan->type) { case IIO_INCLI: if (val2 != 0 || val < 1 || val > 10) return -EINVAL; mutex_lock(&data->mutex); ret = mma9551_update_config_bits(data->client, MMA9551_APPID_TILT, MMA9551_TILT_CFG_REG, MMA9551_TILT_ANG_THRESH_MASK, val); mutex_unlock(&data->mutex); return ret; default: return -EINVAL; } } static int mma9551_read_event_value(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir, enum iio_event_info info, int *val, int *val2) { struct mma9551_data *data = iio_priv(indio_dev); int ret; u8 tmp; switch (chan->type) { case IIO_INCLI: mutex_lock(&data->mutex); ret = mma9551_read_config_byte(data->client, MMA9551_APPID_TILT, MMA9551_TILT_CFG_REG, &tmp); mutex_unlock(&data->mutex); if (ret < 0) return ret; *val = tmp & MMA9551_TILT_ANG_THRESH_MASK; *val2 = 0; return IIO_VAL_INT; default: return -EINVAL; } } static const struct iio_event_spec mma9551_incli_event = { .type = IIO_EV_TYPE_ROC, .dir = IIO_EV_DIR_RISING, .mask_separate = BIT(IIO_EV_INFO_ENABLE), .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), }; #define MMA9551_INCLI_CHANNEL(axis) { \ .type = IIO_INCLI, \ .modified = 1, \ .channel2 = axis, \ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ .event_spec = &mma9551_incli_event, \ .num_event_specs = 1, \ } static const struct iio_chan_spec mma9551_channels[] = { MMA9551_ACCEL_CHANNEL(IIO_MOD_X), MMA9551_ACCEL_CHANNEL(IIO_MOD_Y), MMA9551_ACCEL_CHANNEL(IIO_MOD_Z), MMA9551_INCLI_CHANNEL(IIO_MOD_X), MMA9551_INCLI_CHANNEL(IIO_MOD_Y), MMA9551_INCLI_CHANNEL(IIO_MOD_Z), }; static const struct iio_info mma9551_info = { .read_raw = mma9551_read_raw, .read_event_config = mma9551_read_event_config, .write_event_config = mma9551_write_event_config, .read_event_value = mma9551_read_event_value, .write_event_value = mma9551_write_event_value, }; static irqreturn_t mma9551_event_handler(int irq, void *private) { struct iio_dev *indio_dev = private; struct mma9551_data *data = iio_priv(indio_dev); int i, ret, mma_axis = -1; u16 reg; u8 val; mutex_lock(&data->mutex); for (i = 0; i < 3; i++) if (irq == data->irqs[i]) { mma_axis = i; break; } if (mma_axis == -1) { /* IRQ was triggered on 4th line, which we don't use. */ dev_warn(&data->client->dev, "irq triggered on unused line %d\n", data->irqs[3]); goto out; } switch (mma_axis) { case mma9551_x: reg = MMA9551_TILT_YZ_ANG_REG; break; case mma9551_y: reg = MMA9551_TILT_XZ_ANG_REG; break; case mma9551_z: reg = MMA9551_TILT_XY_ANG_REG; break; } /* * Read the angle even though we don't use it, otherwise we * won't get any further interrupts. */ ret = mma9551_read_status_byte(data->client, MMA9551_APPID_TILT, reg, &val); if (ret < 0) { dev_err(&data->client->dev, "error %d reading tilt register in IRQ\n", ret); goto out; } iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_INCLI, 0, (mma_axis + 1), IIO_EV_TYPE_ROC, IIO_EV_DIR_RISING), iio_get_time_ns(indio_dev)); out: mutex_unlock(&data->mutex); return IRQ_HANDLED; } static int mma9551_init(struct mma9551_data *data) { int ret; ret = mma9551_read_version(data->client); if (ret) return ret; return mma9551_set_device_state(data->client, true); } static int mma9551_gpio_probe(struct iio_dev *indio_dev) { struct gpio_desc *gpio; int i, ret; struct mma9551_data *data = iio_priv(indio_dev); struct device *dev = &data->client->dev; for (i = 0; i < MMA9551_GPIO_COUNT; i++) { gpio = devm_gpiod_get_index(dev, NULL, i, GPIOD_IN); if (IS_ERR(gpio)) { dev_err(dev, "acpi gpio get index failed\n"); return PTR_ERR(gpio); } ret = gpiod_to_irq(gpio); if (ret < 0) return ret; data->irqs[i] = ret; ret = devm_request_threaded_irq(dev, data->irqs[i], NULL, mma9551_event_handler, IRQF_TRIGGER_RISING | IRQF_ONESHOT, MMA9551_IRQ_NAME, indio_dev); if (ret < 0) { dev_err(dev, "request irq %d failed\n", data->irqs[i]); return ret; } dev_dbg(dev, "gpio resource, no:%d irq:%d\n", desc_to_gpio(gpio), data->irqs[i]); } return 0; } static const char *mma9551_match_acpi_device(struct device *dev) { const struct acpi_device_id *id; id = acpi_match_device(dev->driver->acpi_match_table, dev); if (!id) return NULL; return dev_name(dev); } static int mma9551_probe(struct i2c_client *client) { const struct i2c_device_id *id = i2c_client_get_device_id(client); struct mma9551_data *data; struct iio_dev *indio_dev; const char *name = NULL; int ret; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; if (id) name = id->name; else if (ACPI_HANDLE(&client->dev)) name = mma9551_match_acpi_device(&client->dev); ret = mma9551_init(data); if (ret < 0) return ret; mutex_init(&data->mutex); indio_dev->channels = mma9551_channels; indio_dev->num_channels = ARRAY_SIZE(mma9551_channels); indio_dev->name = name; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &mma9551_info; ret = mma9551_gpio_probe(indio_dev); if (ret < 0) goto out_poweroff; ret = pm_runtime_set_active(&client->dev); if (ret < 0) goto out_poweroff; pm_runtime_enable(&client->dev); pm_runtime_set_autosuspend_delay(&client->dev, MMA9551_AUTO_SUSPEND_DELAY_MS); pm_runtime_use_autosuspend(&client->dev); ret = iio_device_register(indio_dev); if (ret < 0) { dev_err(&client->dev, "unable to register iio device\n"); goto err_pm_cleanup; } return 0; err_pm_cleanup: pm_runtime_dont_use_autosuspend(&client->dev); pm_runtime_disable(&client->dev); out_poweroff: mma9551_set_device_state(client, false); return ret; } static void mma9551_remove(struct i2c_client *client) { struct iio_dev *indio_dev = i2c_get_clientdata(client); struct mma9551_data *data = iio_priv(indio_dev); iio_device_unregister(indio_dev); pm_runtime_disable(&client->dev); pm_runtime_set_suspended(&client->dev); mutex_lock(&data->mutex); mma9551_set_device_state(data->client, false); mutex_unlock(&data->mutex); } static int mma9551_runtime_suspend(struct device *dev) { struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); struct mma9551_data *data = iio_priv(indio_dev); int ret; mutex_lock(&data->mutex); ret = mma9551_set_device_state(data->client, false); mutex_unlock(&data->mutex); if (ret < 0) { dev_err(&data->client->dev, "powering off device failed\n"); return -EAGAIN; } return 0; } static int mma9551_runtime_resume(struct device *dev) { struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); struct mma9551_data *data = iio_priv(indio_dev); int ret; ret = mma9551_set_device_state(data->client, true); if (ret < 0) return ret; mma9551_sleep(MMA9551_DEFAULT_SAMPLE_RATE); return 0; } static int mma9551_suspend(struct device *dev) { struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); struct mma9551_data *data = iio_priv(indio_dev); int ret; mutex_lock(&data->mutex); ret = mma9551_set_device_state(data->client, false); mutex_unlock(&data->mutex); return ret; } static int mma9551_resume(struct device *dev) { struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); struct mma9551_data *data = iio_priv(indio_dev); int ret; mutex_lock(&data->mutex); ret = mma9551_set_device_state(data->client, true); mutex_unlock(&data->mutex); return ret; } static const struct dev_pm_ops mma9551_pm_ops = { SYSTEM_SLEEP_PM_OPS(mma9551_suspend, mma9551_resume) RUNTIME_PM_OPS(mma9551_runtime_suspend, mma9551_runtime_resume, NULL) }; static const struct acpi_device_id mma9551_acpi_match[] = { {"MMA9551", 0}, {}, }; MODULE_DEVICE_TABLE(acpi, mma9551_acpi_match); static const struct i2c_device_id mma9551_id[] = { {"mma9551", 0}, {} }; MODULE_DEVICE_TABLE(i2c, mma9551_id); static struct i2c_driver mma9551_driver = { .driver = { .name = MMA9551_DRV_NAME, .acpi_match_table = mma9551_acpi_match, .pm = pm_ptr(&mma9551_pm_ops), }, .probe = mma9551_probe, .remove = mma9551_remove, .id_table = mma9551_id, }; module_i2c_driver(mma9551_driver); MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>"); MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>"); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("MMA9551L motion-sensing platform driver"); MODULE_IMPORT_NS(IIO_MMA9551);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1