| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Michael Hunold | 3329 | 41.72% | 16 | 13.22% |
| Marko Schluessler | 1385 | 17.36% | 1 | 0.83% |
| Alan Cox | 799 | 10.01% | 2 | 1.65% |
| Andrew de Quincey | 781 | 9.79% | 9 | 7.44% |
| David Härdeman | 522 | 6.54% | 15 | 12.40% |
| Manu Abraham | 461 | 5.78% | 15 | 12.40% |
| Oliver Endriss | 171 | 2.14% | 10 | 8.26% |
| Mauro Carvalho Chehab | 141 | 1.77% | 12 | 9.92% |
| Sigmund Augdal Helberg | 92 | 1.15% | 1 | 0.83% |
| Allen Pais | 42 | 0.53% | 1 | 0.83% |
| Andrew Morton | 41 | 0.51% | 4 | 3.31% |
| Stefan Herdler | 33 | 0.41% | 5 | 4.13% |
| Perceval Anichini | 28 | 0.35% | 2 | 1.65% |
| Johannes Stezenbach | 27 | 0.34% | 3 | 2.48% |
| Dmitry Torokhov | 23 | 0.29% | 3 | 2.48% |
| Patrick Boettcher | 20 | 0.25% | 1 | 0.83% |
| Hartmut Hackmann | 15 | 0.19% | 1 | 0.83% |
| Klaas de Waal | 14 | 0.18% | 1 | 0.83% |
| Martin Zwickel | 10 | 0.13% | 1 | 0.83% |
| Hartmut Birr | 8 | 0.10% | 2 | 1.65% |
| Janne Grunau | 7 | 0.09% | 2 | 1.65% |
| Thomas Kaiser | 7 | 0.09% | 1 | 0.83% |
| Ville-Pekka Vainio | 6 | 0.08% | 1 | 0.83% |
| Andi Shyti | 3 | 0.04% | 1 | 0.83% |
| Harvey Harrison | 3 | 0.04% | 2 | 1.65% |
| Hermann Gausterer | 3 | 0.04% | 1 | 0.83% |
| Sean Young | 3 | 0.04% | 2 | 1.65% |
| Bhumika Goyal | 1 | 0.01% | 1 | 0.83% |
| Randy Dunlap | 1 | 0.01% | 1 | 0.83% |
| Joe Perches | 1 | 0.01% | 1 | 0.83% |
| Dave Jones | 1 | 0.01% | 1 | 0.83% |
| Thomas Gleixner | 1 | 0.01% | 1 | 0.83% |
| Arvind Yadav | 1 | 0.01% | 1 | 0.83% |
| Total | 7980 | 121 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * budget-ci.ko: driver for the SAA7146 based Budget DVB cards * with CI (but without analog video input) * * Compiled from various sources by Michael Hunold <michael@mihu.de> * * msp430 IR support contributed by Jack Thomasson <jkt@Helius.COM> * partially based on the Siemens DVB driver by Ralph+Marcus Metzler * * CI interface support (c) 2004 Andrew de Quincey <adq_dvb@lidskialf.net> * * the project's page is at https://linuxtv.org */ #include <linux/module.h> #include <linux/errno.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/spinlock.h> #include <media/rc-core.h> #include "budget.h" #include <media/dvb_ca_en50221.h> #include "stv0299.h" #include "stv0297.h" #include "tda1004x.h" #include "stb0899_drv.h" #include "stb0899_reg.h" #include "stb0899_cfg.h" #include "stb6100.h" #include "stb6100_cfg.h" #include "lnbp21.h" #include "bsbe1.h" #include "bsru6.h" #include "tda1002x.h" #include "tda827x.h" #include "bsbe1-d01a.h" #define MODULE_NAME "budget_ci" /* * Regarding DEBIADDR_IR: * Some CI modules hang if random addresses are read. * Using address 0x4000 for the IR read means that we * use the same address as for CI version, which should * be a safe default. */ #define DEBIADDR_IR 0x4000 #define DEBIADDR_CICONTROL 0x0000 #define DEBIADDR_CIVERSION 0x4000 #define DEBIADDR_IO 0x1000 #define DEBIADDR_ATTR 0x3000 #define CICONTROL_RESET 0x01 #define CICONTROL_ENABLETS 0x02 #define CICONTROL_CAMDETECT 0x08 #define DEBICICTL 0x00420000 #define DEBICICAM 0x02420000 #define SLOTSTATUS_NONE 1 #define SLOTSTATUS_PRESENT 2 #define SLOTSTATUS_RESET 4 #define SLOTSTATUS_READY 8 #define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) /* RC5 device wildcard */ #define IR_DEVICE_ANY 255 static int rc5_device = -1; module_param(rc5_device, int, 0644); MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)"); static int ir_debug; module_param(ir_debug, int, 0644); MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct budget_ci_ir { struct rc_dev *dev; struct tasklet_struct msp430_irq_tasklet; char name[72]; /* 40 + 32 for (struct saa7146_dev).name */ char phys[32]; int rc5_device; u32 ir_key; bool have_command; bool full_rc5; /* Outputs a full RC5 code */ }; struct budget_ci { struct budget budget; struct tasklet_struct ciintf_irq_tasklet; int slot_status; int ci_irq; struct dvb_ca_en50221 ca; struct budget_ci_ir ir; u8 tuner_pll_address; /* used for philips_tdm1316l configs */ }; static void msp430_ir_interrupt(struct tasklet_struct *t) { struct budget_ci_ir *ir = from_tasklet(ir, t, msp430_irq_tasklet); struct budget_ci *budget_ci = container_of(ir, typeof(*budget_ci), ir); struct rc_dev *dev = budget_ci->ir.dev; u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8; /* * The msp430 chip can generate two different bytes, command and device * * type1: X1CCCCCC, C = command bits (0 - 63) * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit * * Each signal from the remote control can generate one or more command * bytes and one or more device bytes. For the repeated bytes, the * highest bit (X) is set. The first command byte is always generated * before the first device byte. Other than that, no specific order * seems to apply. To make life interesting, bytes can also be lost. * * Only when we have a command and device byte, a keypress is * generated. */ if (ir_debug) pr_info("received byte 0x%02x\n", command); /* Remove repeat bit, we use every command */ command = command & 0x7f; /* Is this a RC5 command byte? */ if (command & 0x40) { budget_ci->ir.have_command = true; budget_ci->ir.ir_key = command & 0x3f; return; } /* It's a RC5 device byte */ if (!budget_ci->ir.have_command) return; budget_ci->ir.have_command = false; if (budget_ci->ir.rc5_device != IR_DEVICE_ANY && budget_ci->ir.rc5_device != (command & 0x1f)) return; if (budget_ci->ir.full_rc5) { rc_keydown(dev, RC_PROTO_RC5, RC_SCANCODE_RC5(budget_ci->ir.rc5_device, budget_ci->ir.ir_key), !!(command & 0x20)); return; } /* FIXME: We should generate complete scancodes for all devices */ rc_keydown(dev, RC_PROTO_UNKNOWN, budget_ci->ir.ir_key, !!(command & 0x20)); } static int msp430_ir_init(struct budget_ci *budget_ci) { struct saa7146_dev *saa = budget_ci->budget.dev; struct rc_dev *dev; int error; dev = rc_allocate_device(RC_DRIVER_SCANCODE); if (!dev) { pr_err("IR interface initialisation failed\n"); return -ENOMEM; } snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name), "Budget-CI dvb ir receiver %s", saa->name); snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys), "pci-%s/ir0", pci_name(saa->pci)); dev->driver_name = MODULE_NAME; dev->device_name = budget_ci->ir.name; dev->input_phys = budget_ci->ir.phys; dev->input_id.bustype = BUS_PCI; dev->input_id.version = 1; if (saa->pci->subsystem_vendor) { dev->input_id.vendor = saa->pci->subsystem_vendor; dev->input_id.product = saa->pci->subsystem_device; } else { dev->input_id.vendor = saa->pci->vendor; dev->input_id.product = saa->pci->device; } dev->dev.parent = &saa->pci->dev; if (rc5_device < 0) budget_ci->ir.rc5_device = IR_DEVICE_ANY; else budget_ci->ir.rc5_device = rc5_device; /* Select keymap and address */ switch (budget_ci->budget.dev->pci->subsystem_device) { case 0x100c: case 0x100f: case 0x1011: case 0x1012: /* The hauppauge keymap is a superset of these remotes */ dev->map_name = RC_MAP_HAUPPAUGE; budget_ci->ir.full_rc5 = true; if (rc5_device < 0) budget_ci->ir.rc5_device = 0x1f; break; case 0x1010: case 0x1017: case 0x1019: case 0x101a: case 0x101b: /* for the Technotrend 1500 bundled remote */ dev->map_name = RC_MAP_TT_1500; break; default: /* unknown remote */ dev->map_name = RC_MAP_BUDGET_CI_OLD; break; } if (!budget_ci->ir.full_rc5) dev->scancode_mask = 0xff; error = rc_register_device(dev); if (error) { pr_err("could not init driver for IR device (code %d)\n", error); rc_free_device(dev); return error; } budget_ci->ir.dev = dev; tasklet_setup(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt); SAA7146_IER_ENABLE(saa, MASK_06); saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI); return 0; } static void msp430_ir_deinit(struct budget_ci *budget_ci) { struct saa7146_dev *saa = budget_ci->budget.dev; SAA7146_IER_DISABLE(saa, MASK_06); saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); tasklet_kill(&budget_ci->ir.msp430_irq_tasklet); rc_unregister_device(budget_ci->ir.dev); } static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) { struct budget_ci *budget_ci = ca->data; if (slot != 0) return -EINVAL; return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0); } static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) { struct budget_ci *budget_ci = ca->data; if (slot != 0) return -EINVAL; return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0); } static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) { struct budget_ci *budget_ci = ca->data; if (slot != 0) return -EINVAL; return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, DEBIADDR_IO | (address & 3), 1, 1, 0); } static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) { struct budget_ci *budget_ci = ca->data; if (slot != 0) return -EINVAL; return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, DEBIADDR_IO | (address & 3), 1, value, 1, 0); } static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) { struct budget_ci *budget_ci = ca->data; struct saa7146_dev *saa = budget_ci->budget.dev; if (slot != 0) return -EINVAL; if (budget_ci->ci_irq) { // trigger on RISING edge during reset so we know when READY is re-asserted saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); } budget_ci->slot_status = SLOTSTATUS_RESET; ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); msleep(1); ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, CICONTROL_RESET, 1, 0); saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); return 0; } static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) { struct budget_ci *budget_ci = ca->data; struct saa7146_dev *saa = budget_ci->budget.dev; if (slot != 0) return -EINVAL; saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); return 0; } static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) { struct budget_ci *budget_ci = ca->data; struct saa7146_dev *saa = budget_ci->budget.dev; int tmp; if (slot != 0) return -EINVAL; saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, tmp | CICONTROL_ENABLETS, 1, 0); ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); return 0; } static void ciintf_interrupt(struct tasklet_struct *t) { struct budget_ci *budget_ci = from_tasklet(budget_ci, t, ciintf_irq_tasklet); struct saa7146_dev *saa = budget_ci->budget.dev; unsigned int flags; // ensure we don't get spurious IRQs during initialisation if (!budget_ci->budget.ci_present) return; // read the CAM status flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); if (flags & CICONTROL_CAMDETECT) { // GPIO should be set to trigger on falling edge if a CAM is present saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); if (budget_ci->slot_status & SLOTSTATUS_NONE) { // CAM insertion IRQ budget_ci->slot_status = SLOTSTATUS_PRESENT; dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, DVB_CA_EN50221_CAMCHANGE_INSERTED); } else if (budget_ci->slot_status & SLOTSTATUS_RESET) { // CAM ready (reset completed) budget_ci->slot_status = SLOTSTATUS_READY; dvb_ca_en50221_camready_irq(&budget_ci->ca, 0); } else if (budget_ci->slot_status & SLOTSTATUS_READY) { // FR/DA IRQ dvb_ca_en50221_frda_irq(&budget_ci->ca, 0); } } else { // trigger on rising edge if a CAM is not present - when a CAM is inserted, we // only want to get the IRQ when it sets READY. If we trigger on the falling edge, // the CAM might not actually be ready yet. saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); // generate a CAM removal IRQ if we haven't already if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) { // CAM removal IRQ budget_ci->slot_status = SLOTSTATUS_NONE; dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, DVB_CA_EN50221_CAMCHANGE_REMOVED); } } } static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) { struct budget_ci *budget_ci = ca->data; unsigned int flags; // ensure we don't get spurious IRQs during initialisation if (!budget_ci->budget.ci_present) return -EINVAL; // read the CAM status flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); if (flags & CICONTROL_CAMDETECT) { // mark it as present if it wasn't before if (budget_ci->slot_status & SLOTSTATUS_NONE) budget_ci->slot_status = SLOTSTATUS_PRESENT; // during a RESET, we check if we can read from IO memory to see when CAM is ready if (budget_ci->slot_status & SLOTSTATUS_RESET) { if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) budget_ci->slot_status = SLOTSTATUS_READY; } } else { budget_ci->slot_status = SLOTSTATUS_NONE; } if (budget_ci->slot_status != SLOTSTATUS_NONE) { if (budget_ci->slot_status & SLOTSTATUS_READY) return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; return DVB_CA_EN50221_POLL_CAM_PRESENT; } return 0; } static int ciintf_init(struct budget_ci *budget_ci) { struct saa7146_dev *saa = budget_ci->budget.dev; int flags; int result; int ci_version; int ca_flags; memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221)); // enable DEBI pins saa7146_write(saa, MC1, MASK_27 | MASK_11); // test if it is there ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0); if ((ci_version & 0xa0) != 0xa0) { result = -ENODEV; goto error; } // determine whether a CAM is present or not flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); budget_ci->slot_status = SLOTSTATUS_NONE; if (flags & CICONTROL_CAMDETECT) budget_ci->slot_status = SLOTSTATUS_PRESENT; // version 0xa2 of the CI firmware doesn't generate interrupts if (ci_version == 0xa2) { ca_flags = 0; budget_ci->ci_irq = 0; } else { ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE | DVB_CA_EN50221_FLAG_IRQ_FR | DVB_CA_EN50221_FLAG_IRQ_DA; budget_ci->ci_irq = 1; } // register CI interface budget_ci->ca.owner = THIS_MODULE; budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem; budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem; budget_ci->ca.read_cam_control = ciintf_read_cam_control; budget_ci->ca.write_cam_control = ciintf_write_cam_control; budget_ci->ca.slot_reset = ciintf_slot_reset; budget_ci->ca.slot_shutdown = ciintf_slot_shutdown; budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable; budget_ci->ca.poll_slot_status = ciintf_poll_slot_status; budget_ci->ca.data = budget_ci; result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter, &budget_ci->ca, ca_flags, 1); if (result != 0) { pr_err("CI interface detected, but initialisation failed.\n"); goto error; } // Setup CI slot IRQ if (budget_ci->ci_irq) { tasklet_setup(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt); if (budget_ci->slot_status != SLOTSTATUS_NONE) saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); else saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); SAA7146_IER_ENABLE(saa, MASK_03); } // enable interface ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, CICONTROL_RESET, 1, 0); // success! pr_info("CI interface initialised\n"); budget_ci->budget.ci_present = 1; // forge a fake CI IRQ so the CAM state is setup correctly if (budget_ci->ci_irq) { flags = DVB_CA_EN50221_CAMCHANGE_REMOVED; if (budget_ci->slot_status != SLOTSTATUS_NONE) flags = DVB_CA_EN50221_CAMCHANGE_INSERTED; dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags); } return 0; error: saa7146_write(saa, MC1, MASK_27); return result; } static void ciintf_deinit(struct budget_ci *budget_ci) { struct saa7146_dev *saa = budget_ci->budget.dev; // disable CI interrupts if (budget_ci->ci_irq) { SAA7146_IER_DISABLE(saa, MASK_03); saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); tasklet_kill(&budget_ci->ciintf_irq_tasklet); } // reset interface ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); msleep(1); ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, CICONTROL_RESET, 1, 0); // disable TS data stream to CI interface saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); // release the CA device dvb_ca_en50221_release(&budget_ci->ca); // disable DEBI pins saa7146_write(saa, MC1, MASK_27); } static void budget_ci_irq(struct saa7146_dev *dev, u32 *isr) { struct budget_ci *budget_ci = dev->ext_priv; dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci); if (*isr & MASK_06) tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet); if (*isr & MASK_10) ttpci_budget_irq10_handler(dev, isr); if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq)) tasklet_schedule(&budget_ci->ciintf_irq_tasklet); } static u8 philips_su1278_tt_inittab[] = { 0x01, 0x0f, 0x02, 0x30, 0x03, 0x00, 0x04, 0x5b, 0x05, 0x85, 0x06, 0x02, 0x07, 0x00, 0x08, 0x02, 0x09, 0x00, 0x0C, 0x01, 0x0D, 0x81, 0x0E, 0x44, 0x0f, 0x14, 0x10, 0x3c, 0x11, 0x84, 0x12, 0xda, 0x13, 0x97, 0x14, 0x95, 0x15, 0xc9, 0x16, 0x19, 0x17, 0x8c, 0x18, 0x59, 0x19, 0xf8, 0x1a, 0xfe, 0x1c, 0x7f, 0x1d, 0x00, 0x1e, 0x00, 0x1f, 0x50, 0x20, 0x00, 0x21, 0x00, 0x22, 0x00, 0x23, 0x00, 0x28, 0x00, 0x29, 0x28, 0x2a, 0x14, 0x2b, 0x0f, 0x2c, 0x09, 0x2d, 0x09, 0x31, 0x1f, 0x32, 0x19, 0x33, 0xfc, 0x34, 0x93, 0xff, 0xff }; static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) { stv0299_writereg(fe, 0x0e, 0x44); if (srate >= 10000000) { stv0299_writereg(fe, 0x13, 0x97); stv0299_writereg(fe, 0x14, 0x95); stv0299_writereg(fe, 0x15, 0xc9); stv0299_writereg(fe, 0x17, 0x8c); stv0299_writereg(fe, 0x1a, 0xfe); stv0299_writereg(fe, 0x1c, 0x7f); stv0299_writereg(fe, 0x2d, 0x09); } else { stv0299_writereg(fe, 0x13, 0x99); stv0299_writereg(fe, 0x14, 0x8d); stv0299_writereg(fe, 0x15, 0xce); stv0299_writereg(fe, 0x17, 0x43); stv0299_writereg(fe, 0x1a, 0x1d); stv0299_writereg(fe, 0x1c, 0x12); stv0299_writereg(fe, 0x2d, 0x05); } stv0299_writereg(fe, 0x0e, 0x23); stv0299_writereg(fe, 0x0f, 0x94); stv0299_writereg(fe, 0x10, 0x39); stv0299_writereg(fe, 0x15, 0xc9); stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); stv0299_writereg(fe, 0x21, (ratio) & 0xf0); return 0; } static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; struct budget_ci *budget_ci = fe->dvb->priv; u32 div; u8 buf[4]; struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf) }; if ((p->frequency < 950000) || (p->frequency > 2150000)) return -EINVAL; div = (p->frequency + (500 - 1)) / 500; /* round correctly */ buf[0] = (div >> 8) & 0x7f; buf[1] = div & 0xff; buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2; buf[3] = 0x20; if (p->symbol_rate < 4000000) buf[3] |= 1; if (p->frequency < 1250000) buf[3] |= 0; else if (p->frequency < 1550000) buf[3] |= 0x40; else if (p->frequency < 2050000) buf[3] |= 0x80; else if (p->frequency < 2150000) buf[3] |= 0xC0; if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1) return -EIO; return 0; } static const struct stv0299_config philips_su1278_tt_config = { .demod_address = 0x68, .inittab = philips_su1278_tt_inittab, .mclk = 64000000UL, .invert = 0, .skip_reinit = 1, .lock_output = STV0299_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, .min_delay_ms = 50, .set_symbol_rate = philips_su1278_tt_set_symbol_rate, }; static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe) { struct budget_ci *budget_ci = fe->dvb->priv; static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab }; static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 }; struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address, .flags = 0, .buf = td1316_init, .len = sizeof(td1316_init) }; // setup PLL configuration if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) return -EIO; msleep(1); // disable the mc44BC374c (do not check for errors) tuner_msg.addr = 0x65; tuner_msg.buf = disable_mc44BC374c; tuner_msg.len = sizeof(disable_mc44BC374c); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) { if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1); } return 0; } static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; struct budget_ci *budget_ci = fe->dvb->priv; u8 tuner_buf[4]; struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address, .flags = 0, .buf = tuner_buf, .len = sizeof(tuner_buf) }; int tuner_frequency = 0; u8 band, cp, filter; // determine charge pump tuner_frequency = p->frequency + 36130000; if (tuner_frequency < 87000000) return -EINVAL; else if (tuner_frequency < 130000000) cp = 3; else if (tuner_frequency < 160000000) cp = 5; else if (tuner_frequency < 200000000) cp = 6; else if (tuner_frequency < 290000000) cp = 3; else if (tuner_frequency < 420000000) cp = 5; else if (tuner_frequency < 480000000) cp = 6; else if (tuner_frequency < 620000000) cp = 3; else if (tuner_frequency < 830000000) cp = 5; else if (tuner_frequency < 895000000) cp = 7; else return -EINVAL; // determine band if (p->frequency < 49000000) return -EINVAL; else if (p->frequency < 159000000) band = 1; else if (p->frequency < 444000000) band = 2; else if (p->frequency < 861000000) band = 4; else return -EINVAL; // setup PLL filter and TDA9889 switch (p->bandwidth_hz) { case 6000000: tda1004x_writereg(fe, 0x0C, 0x14); filter = 0; break; case 7000000: tda1004x_writereg(fe, 0x0C, 0x80); filter = 0; break; case 8000000: tda1004x_writereg(fe, 0x0C, 0x14); filter = 1; break; default: return -EINVAL; } // calculate divisor // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6) tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000; // setup tuner buffer tuner_buf[0] = tuner_frequency >> 8; tuner_buf[1] = tuner_frequency & 0xff; tuner_buf[2] = 0xca; tuner_buf[3] = (cp << 5) | (filter << 3) | band; if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) return -EIO; msleep(1); return 0; } static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name) { struct budget_ci *budget_ci = fe->dvb->priv; return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev); } static struct tda1004x_config philips_tdm1316l_config = { .demod_address = 0x8, .invert = 0, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_4M, .agc_config = TDA10046_AGC_DEFAULT, .if_freq = TDA10046_FREQ_3617, .request_firmware = philips_tdm1316l_request_firmware, }; static struct tda1004x_config philips_tdm1316l_config_invert = { .demod_address = 0x8, .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_4M, .agc_config = TDA10046_AGC_DEFAULT, .if_freq = TDA10046_FREQ_3617, .request_firmware = philips_tdm1316l_request_firmware, }; static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; struct budget_ci *budget_ci = fe->dvb->priv; u8 tuner_buf[5]; struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address, .flags = 0, .buf = tuner_buf, .len = sizeof(tuner_buf) }; int tuner_frequency = 0; u8 band, cp, filter; // determine charge pump tuner_frequency = p->frequency + 36125000; if (tuner_frequency < 87000000) { return -EINVAL; } else if (tuner_frequency < 130000000) { cp = 3; band = 1; } else if (tuner_frequency < 160000000) { cp = 5; band = 1; } else if (tuner_frequency < 200000000) { cp = 6; band = 1; } else if (tuner_frequency < 290000000) { cp = 3; band = 2; } else if (tuner_frequency < 420000000) { cp = 5; band = 2; } else if (tuner_frequency < 480000000) { cp = 6; band = 2; } else if (tuner_frequency < 620000000) { cp = 3; band = 4; } else if (tuner_frequency < 830000000) { cp = 5; band = 4; } else if (tuner_frequency < 895000000) { cp = 7; band = 4; } else { return -EINVAL; } // assume PLL filter should always be 8MHz for the moment. filter = 1; // calculate divisor tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500; // setup tuner buffer tuner_buf[0] = tuner_frequency >> 8; tuner_buf[1] = tuner_frequency & 0xff; tuner_buf[2] = 0xc8; tuner_buf[3] = (cp << 5) | (filter << 3) | band; tuner_buf[4] = 0x80; if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) return -EIO; msleep(50); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) return -EIO; msleep(1); return 0; } static u8 dvbc_philips_tdm1316l_inittab[] = { 0x80, 0x01, 0x80, 0x00, 0x81, 0x01, 0x81, 0x00, 0x00, 0x09, 0x01, 0x69, 0x03, 0x00, 0x04, 0x00, 0x07, 0x00, 0x08, 0x00, 0x20, 0x00, 0x21, 0x40, 0x22, 0x00, 0x23, 0x00, 0x24, 0x40, 0x25, 0x88, 0x30, 0xff, 0x31, 0x00, 0x32, 0xff, 0x33, 0x00, 0x34, 0x50, 0x35, 0x7f, 0x36, 0x00, 0x37, 0x20, 0x38, 0x00, 0x40, 0x1c, 0x41, 0xff, 0x42, 0x29, 0x43, 0x20, 0x44, 0xff, 0x45, 0x00, 0x46, 0x00, 0x49, 0x04, 0x4a, 0x00, 0x4b, 0x7b, 0x52, 0x30, 0x55, 0xae, 0x56, 0x47, 0x57, 0xe1, 0x58, 0x3a, 0x5a, 0x1e, 0x5b, 0x34, 0x60, 0x00, 0x63, 0x00, 0x64, 0x00, 0x65, 0x00, 0x66, 0x00, 0x67, 0x00, 0x68, 0x00, 0x69, 0x00, 0x6a, 0x02, 0x6b, 0x00, 0x70, 0xff, 0x71, 0x00, 0x72, 0x00, 0x73, 0x00, 0x74, 0x0c, 0x80, 0x00, 0x81, 0x00, 0x82, 0x00, 0x83, 0x00, 0x84, 0x04, 0x85, 0x80, 0x86, 0x24, 0x87, 0x78, 0x88, 0x10, 0x89, 0x00, 0x90, 0x01, 0x91, 0x01, 0xa0, 0x04, 0xa1, 0x00, 0xa2, 0x00, 0xb0, 0x91, 0xb1, 0x0b, 0xc0, 0x53, 0xc1, 0x70, 0xc2, 0x12, 0xd0, 0x00, 0xd1, 0x00, 0xd2, 0x00, 0xd3, 0x00, 0xd4, 0x00, 0xd5, 0x00, 0xde, 0x00, 0xdf, 0x00, 0x61, 0x38, 0x62, 0x0a, 0x53, 0x13, 0x59, 0x08, 0xff, 0xff, }; static struct stv0297_config dvbc_philips_tdm1316l_config = { .demod_address = 0x1c, .inittab = dvbc_philips_tdm1316l_inittab, .invert = 0, .stop_during_read = 1, }; static struct tda10023_config tda10023_config = { .demod_address = 0xc, .invert = 0, .xtal = 16000000, .pll_m = 11, .pll_p = 3, .pll_n = 1, .deltaf = 0xa511, }; static struct tda827x_config tda827x_config = { .config = 0, }; /* TT S2-3200 DVB-S (STB0899) Inittab */ static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = { { STB0899_DEV_ID, 0x81 }, { STB0899_DISCNTRL1, 0x32 }, { STB0899_DISCNTRL2, 0x80 }, { STB0899_DISRX_ST0, 0x04 }, { STB0899_DISRX_ST1, 0x00 }, { STB0899_DISPARITY, 0x00 }, { STB0899_DISSTATUS, 0x20 }, { STB0899_DISF22, 0x8c }, { STB0899_DISF22RX, 0x9a }, { STB0899_SYSREG, 0x0b }, { STB0899_ACRPRESC, 0x11 }, { STB0899_ACRDIV1, 0x0a }, { STB0899_ACRDIV2, 0x05 }, { STB0899_DACR1, 0x00 }, { STB0899_DACR2, 0x00 }, { STB0899_OUTCFG, 0x00 }, { STB0899_MODECFG, 0x00 }, { STB0899_IRQSTATUS_3, 0x30 }, { STB0899_IRQSTATUS_2, 0x00 }, { STB0899_IRQSTATUS_1, 0x00 }, { STB0899_IRQSTATUS_0, 0x00 }, { STB0899_IRQMSK_3, 0xf3 }, { STB0899_IRQMSK_2, 0xfc }, { STB0899_IRQMSK_1, 0xff }, { STB0899_IRQMSK_0, 0xff }, { STB0899_IRQCFG, 0x00 }, { STB0899_I2CCFG, 0x88 }, { STB0899_I2CRPT, 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */ { STB0899_IOPVALUE5, 0x00 }, { STB0899_IOPVALUE4, 0x20 }, { STB0899_IOPVALUE3, 0xc9 }, { STB0899_IOPVALUE2, 0x90 }, { STB0899_IOPVALUE1, 0x40 }, { STB0899_IOPVALUE0, 0x00 }, { STB0899_GPIO00CFG, 0x82 }, { STB0899_GPIO01CFG, 0x82 }, { STB0899_GPIO02CFG, 0x82 }, { STB0899_GPIO03CFG, 0x82 }, { STB0899_GPIO04CFG, 0x82 }, { STB0899_GPIO05CFG, 0x82 }, { STB0899_GPIO06CFG, 0x82 }, { STB0899_GPIO07CFG, 0x82 }, { STB0899_GPIO08CFG, 0x82 }, { STB0899_GPIO09CFG, 0x82 }, { STB0899_GPIO10CFG, 0x82 }, { STB0899_GPIO11CFG, 0x82 }, { STB0899_GPIO12CFG, 0x82 }, { STB0899_GPIO13CFG, 0x82 }, { STB0899_GPIO14CFG, 0x82 }, { STB0899_GPIO15CFG, 0x82 }, { STB0899_GPIO16CFG, 0x82 }, { STB0899_GPIO17CFG, 0x82 }, { STB0899_GPIO18CFG, 0x82 }, { STB0899_GPIO19CFG, 0x82 }, { STB0899_GPIO20CFG, 0x82 }, { STB0899_SDATCFG, 0xb8 }, { STB0899_SCLTCFG, 0xba }, { STB0899_AGCRFCFG, 0x1c }, /* 0x11 */ { STB0899_GPIO22, 0x82 }, /* AGCBB2CFG */ { STB0899_GPIO21, 0x91 }, /* AGCBB1CFG */ { STB0899_DIRCLKCFG, 0x82 }, { STB0899_CLKOUT27CFG, 0x7e }, { STB0899_STDBYCFG, 0x82 }, { STB0899_CS0CFG, 0x82 }, { STB0899_CS1CFG, 0x82 }, { STB0899_DISEQCOCFG, 0x20 }, { STB0899_GPIO32CFG, 0x82 }, { STB0899_GPIO33CFG, 0x82 }, { STB0899_GPIO34CFG, 0x82 }, { STB0899_GPIO35CFG, 0x82 }, { STB0899_GPIO36CFG, 0x82 }, { STB0899_GPIO37CFG, 0x82 }, { STB0899_GPIO38CFG, 0x82 }, { STB0899_GPIO39CFG, 0x82 }, { STB0899_NCOARSE, 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ { STB0899_SYNTCTRL, 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ { STB0899_FILTCTRL, 0x00 }, { STB0899_SYSCTRL, 0x00 }, { STB0899_STOPCLK1, 0x20 }, { STB0899_STOPCLK2, 0x00 }, { STB0899_INTBUFSTATUS, 0x00 }, { STB0899_INTBUFCTRL, 0x0a }, { 0xffff, 0xff }, }; static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = { { STB0899_DEMOD, 0x00 }, { STB0899_RCOMPC, 0xc9 }, { STB0899_AGC1CN, 0x41 }, { STB0899_AGC1REF, 0x10 }, { STB0899_RTC, 0x7a }, { STB0899_TMGCFG, 0x4e }, { STB0899_AGC2REF, 0x34 }, { STB0899_TLSR, 0x84 }, { STB0899_CFD, 0xc7 }, { STB0899_ACLC, 0x87 }, { STB0899_BCLC, 0x94 }, { STB0899_EQON, 0x41 }, { STB0899_LDT, 0xdd }, { STB0899_LDT2, 0xc9 }, { STB0899_EQUALREF, 0xb4 }, { STB0899_TMGRAMP, 0x10 }, { STB0899_TMGTHD, 0x30 }, { STB0899_IDCCOMP, 0xfb }, { STB0899_QDCCOMP, 0x03 }, { STB0899_POWERI, 0x3b }, { STB0899_POWERQ, 0x3d }, { STB0899_RCOMP, 0x81 }, { STB0899_AGCIQIN, 0x80 }, { STB0899_AGC2I1, 0x04 }, { STB0899_AGC2I2, 0xf5 }, { STB0899_TLIR, 0x25 }, { STB0899_RTF, 0x80 }, { STB0899_DSTATUS, 0x00 }, { STB0899_LDI, 0xca }, { STB0899_CFRM, 0xf1 }, { STB0899_CFRL, 0xf3 }, { STB0899_NIRM, 0x2a }, { STB0899_NIRL, 0x05 }, { STB0899_ISYMB, 0x17 }, { STB0899_QSYMB, 0xfa }, { STB0899_SFRH, 0x2f }, { STB0899_SFRM, 0x68 }, { STB0899_SFRL, 0x40 }, { STB0899_SFRUPH, 0x2f }, { STB0899_SFRUPM, 0x68 }, { STB0899_SFRUPL, 0x40 }, { STB0899_EQUAI1, 0xfd }, { STB0899_EQUAQ1, 0x04 }, { STB0899_EQUAI2, 0x0f }, { STB0899_EQUAQ2, 0xff }, { STB0899_EQUAI3, 0xdf }, { STB0899_EQUAQ3, 0xfa }, { STB0899_EQUAI4, 0x37 }, { STB0899_EQUAQ4, 0x0d }, { STB0899_EQUAI5, 0xbd }, { STB0899_EQUAQ5, 0xf7 }, { STB0899_DSTATUS2, 0x00 }, { STB0899_VSTATUS, 0x00 }, { STB0899_VERROR, 0xff }, { STB0899_IQSWAP, 0x2a }, { STB0899_ECNT1M, 0x00 }, { STB0899_ECNT1L, 0x00 }, { STB0899_ECNT2M, 0x00 }, { STB0899_ECNT2L, 0x00 }, { STB0899_ECNT3M, 0x00 }, { STB0899_ECNT3L, 0x00 }, { STB0899_FECAUTO1, 0x06 }, { STB0899_FECM, 0x01 }, { STB0899_VTH12, 0xf0 }, { STB0899_VTH23, 0xa0 }, { STB0899_VTH34, 0x78 }, { STB0899_VTH56, 0x4e }, { STB0899_VTH67, 0x48 }, { STB0899_VTH78, 0x38 }, { STB0899_PRVIT, 0xff }, { STB0899_VITSYNC, 0x19 }, { STB0899_RSULC, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ { STB0899_TSULC, 0x42 }, { STB0899_RSLLC, 0x40 }, { STB0899_TSLPL, 0x12 }, { STB0899_TSCFGH, 0x0c }, { STB0899_TSCFGM, 0x00 }, { STB0899_TSCFGL, 0x0c }, { STB0899_TSOUT, 0x4d }, /* 0x0d for CAM */ { STB0899_RSSYNCDEL, 0x00 }, { STB0899_TSINHDELH, 0x02 }, { STB0899_TSINHDELM, 0x00 }, { STB0899_TSINHDELL, 0x00 }, { STB0899_TSLLSTKM, 0x00 }, { STB0899_TSLLSTKL, 0x00 }, { STB0899_TSULSTKM, 0x00 }, { STB0899_TSULSTKL, 0xab }, { STB0899_PCKLENUL, 0x00 }, { STB0899_PCKLENLL, 0xcc }, { STB0899_RSPCKLEN, 0xcc }, { STB0899_TSSTATUS, 0x80 }, { STB0899_ERRCTRL1, 0xb6 }, { STB0899_ERRCTRL2, 0x96 }, { STB0899_ERRCTRL3, 0x89 }, { STB0899_DMONMSK1, 0x27 }, { STB0899_DMONMSK0, 0x03 }, { STB0899_DEMAPVIT, 0x5c }, { STB0899_PLPARM, 0x1f }, { STB0899_PDELCTRL, 0x48 }, { STB0899_PDELCTRL2, 0x00 }, { STB0899_BBHCTRL1, 0x00 }, { STB0899_BBHCTRL2, 0x00 }, { STB0899_HYSTTHRESH, 0x77 }, { STB0899_MATCSTM, 0x00 }, { STB0899_MATCSTL, 0x00 }, { STB0899_UPLCSTM, 0x00 }, { STB0899_UPLCSTL, 0x00 }, { STB0899_DFLCSTM, 0x00 }, { STB0899_DFLCSTL, 0x00 }, { STB0899_SYNCCST, 0x00 }, { STB0899_SYNCDCSTM, 0x00 }, { STB0899_SYNCDCSTL, 0x00 }, { STB0899_ISI_ENTRY, 0x00 }, { STB0899_ISI_BIT_EN, 0x00 }, { STB0899_MATSTRM, 0x00 }, { STB0899_MATSTRL, 0x00 }, { STB0899_UPLSTRM, 0x00 }, { STB0899_UPLSTRL, 0x00 }, { STB0899_DFLSTRM, 0x00 }, { STB0899_DFLSTRL, 0x00 }, { STB0899_SYNCSTR, 0x00 }, { STB0899_SYNCDSTRM, 0x00 }, { STB0899_SYNCDSTRL, 0x00 }, { STB0899_CFGPDELSTATUS1, 0x10 }, { STB0899_CFGPDELSTATUS2, 0x00 }, { STB0899_BBFERRORM, 0x00 }, { STB0899_BBFERRORL, 0x00 }, { STB0899_UPKTERRORM, 0x00 }, { STB0899_UPKTERRORL, 0x00 }, { 0xffff, 0xff }, }; static struct stb0899_config tt3200_config = { .init_dev = tt3200_stb0899_s1_init_1, .init_s2_demod = stb0899_s2_init_2, .init_s1_demod = tt3200_stb0899_s1_init_3, .init_s2_fec = stb0899_s2_init_4, .init_tst = stb0899_s1_init_5, .postproc = NULL, .demod_address = 0x68, .xtal_freq = 27000000, .inversion = IQ_SWAP_ON, .lo_clk = 76500000, .hi_clk = 99000000, .esno_ave = STB0899_DVBS2_ESNO_AVE, .esno_quant = STB0899_DVBS2_ESNO_QUANT, .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, .tuner_get_frequency = stb6100_get_frequency, .tuner_set_frequency = stb6100_set_frequency, .tuner_set_bandwidth = stb6100_set_bandwidth, .tuner_get_bandwidth = stb6100_get_bandwidth, .tuner_set_rfsiggain = NULL }; static struct stb6100_config tt3200_stb6100_config = { .tuner_address = 0x60, .refclock = 27000000, }; static void frontend_init(struct budget_ci *budget_ci) { switch (budget_ci->budget.dev->pci->subsystem_device) { case 0x100c: // Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059)) budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap); if (budget_ci->budget.dvb_frontend) { budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; break; } break; case 0x100f: // Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059)) budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap); if (budget_ci->budget.dvb_frontend) { budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params; break; } break; case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt)) budget_ci->tuner_pll_address = 0x61; budget_ci->budget.dvb_frontend = dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap); if (budget_ci->budget.dvb_frontend) { budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params; break; } break; case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889) budget_ci->tuner_pll_address = 0x63; budget_ci->budget.dvb_frontend = dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap); if (budget_ci->budget.dvb_frontend) { budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; break; } break; case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt)) budget_ci->tuner_pll_address = 0x60; budget_ci->budget.dvb_frontend = dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap); if (budget_ci->budget.dvb_frontend) { budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; break; } break; case 0x1017: // TT S-1500 PCI budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap); if (budget_ci->budget.dvb_frontend) { budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) { pr_err("%s(): No LNBP21 found!\n", __func__); dvb_frontend_detach(budget_ci->budget.dvb_frontend); budget_ci->budget.dvb_frontend = NULL; } } break; case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */ budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48); if (budget_ci->budget.dvb_frontend) { if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) { pr_err("%s(): No tda827x found!\n", __func__); dvb_frontend_detach(budget_ci->budget.dvb_frontend); budget_ci->budget.dvb_frontend = NULL; } } break; case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */ budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap); if (budget_ci->budget.dvb_frontend) { if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) { if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { pr_err("%s(): No LNBP21 found!\n", __func__); dvb_frontend_detach(budget_ci->budget.dvb_frontend); budget_ci->budget.dvb_frontend = NULL; } } else { pr_err("%s(): No STB6000 found!\n", __func__); dvb_frontend_detach(budget_ci->budget.dvb_frontend); budget_ci->budget.dvb_frontend = NULL; } } break; case 0x1019: // TT S2-3200 PCI /* * NOTE! on some STB0899 versions, the internal PLL takes a longer time * to settle, aka LOCK. On the older revisions of the chip, we don't see * this, as a result on the newer chips the entire clock tree, will not * be stable after a freshly POWER 'ed up situation. * In this case, we should RESET the STB0899 (Active LOW) and wait for * PLL stabilization. * * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is * connected to the SAA7146 GPIO, GPIO2, Pin 142 */ /* Reset Demodulator */ saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO); /* Wait for everything to die */ msleep(50); /* Pull it up out of Reset state */ saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI); /* Wait for PLL to stabilize */ msleep(250); /* * PLL state should be stable now. Ideally, we should check * for PLL LOCK status. But well, never mind! */ budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap); if (budget_ci->budget.dvb_frontend) { if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) { if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { pr_err("%s(): No LNBP21 found!\n", __func__); dvb_frontend_detach(budget_ci->budget.dvb_frontend); budget_ci->budget.dvb_frontend = NULL; } } else { dvb_frontend_detach(budget_ci->budget.dvb_frontend); budget_ci->budget.dvb_frontend = NULL; } } break; } if (budget_ci->budget.dvb_frontend == NULL) { pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", budget_ci->budget.dev->pci->vendor, budget_ci->budget.dev->pci->device, budget_ci->budget.dev->pci->subsystem_vendor, budget_ci->budget.dev->pci->subsystem_device); } else { if (dvb_register_frontend (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) { pr_err("Frontend registration failed!\n"); dvb_frontend_detach(budget_ci->budget.dvb_frontend); budget_ci->budget.dvb_frontend = NULL; } } } static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) { struct budget_ci *budget_ci; int err; budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL); if (!budget_ci) { err = -ENOMEM; goto out1; } dprintk(2, "budget_ci: %p\n", budget_ci); dev->ext_priv = budget_ci; err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE, adapter_nr); if (err) goto out2; err = msp430_ir_init(budget_ci); if (err) goto out3; ciintf_init(budget_ci); budget_ci->budget.dvb_adapter.priv = budget_ci; frontend_init(budget_ci); ttpci_budget_init_hooks(&budget_ci->budget); return 0; out3: ttpci_budget_deinit(&budget_ci->budget); out2: kfree(budget_ci); out1: return err; } static int budget_ci_detach(struct saa7146_dev *dev) { struct budget_ci *budget_ci = dev->ext_priv; struct saa7146_dev *saa = budget_ci->budget.dev; int err; if (budget_ci->budget.ci_present) ciintf_deinit(budget_ci); msp430_ir_deinit(budget_ci); if (budget_ci->budget.dvb_frontend) { dvb_unregister_frontend(budget_ci->budget.dvb_frontend); dvb_frontend_detach(budget_ci->budget.dvb_frontend); } err = ttpci_budget_deinit(&budget_ci->budget); // disable frontend and CI interface saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); kfree(budget_ci); return err; } static struct saa7146_extension budget_extension; MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC); MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT); MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT); static const struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c), MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f), MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010), MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011), MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012), MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017), MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a), MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019), MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b), { .vendor = 0, } }; MODULE_DEVICE_TABLE(pci, pci_tbl); static struct saa7146_extension budget_extension = { .name = "budget_ci dvb", .flags = SAA7146_USE_I2C_IRQ, .module = THIS_MODULE, .pci_tbl = &pci_tbl[0], .attach = budget_ci_attach, .detach = budget_ci_detach, .irq_mask = MASK_03 | MASK_06 | MASK_10, .irq_func = budget_ci_irq, }; static int __init budget_ci_init(void) { return saa7146_register_extension(&budget_extension); } static void __exit budget_ci_exit(void) { saa7146_unregister_extension(&budget_extension); } module_init(budget_ci_init); module_exit(budget_ci_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others"); MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards w/ CI-module produced by Siemens, Technotrend, Hauppauge");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1